Prolonging charge-separation states by doping lanthanide-ions into {001}/{101} facets-coexposed TiO2 nanosheets for enhancing photocatalytic H2 evolution

Ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets have attracted considerable attention because of their high photocatalytic activity. However, the charge-separated states in the TiO₂ nanosheets must be extended to further enhance their photocatalytic activity for H₂ evolution. Herein, we present a successful attempt to selectively dope lanthanide ions into the {101} facets of ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets through a facile one-step solvothermal method. The lanthanide doping slightly extended the light-harvesting region and markedly improved the charge-separated states of the TiO₂ nanosheets as evidenced by UV-vis absorption and steady-state/transient photoluminescence spectra. Upon simulated sunlight irradiation, we observed a 4.2-fold enhancement in the photocatalytic H₂ evolution activity of optimal Yb³⁺-doped TiO₂ nanosheets compared to that of their undoped counterparts. Furthermore, when Pt nanoparticles were used as cocatalysts to reduce the H₂ overpotential in this system, the photocatalytic activity enhancement factor increased to 8.5. By combining these results with those of control experiments, we confirmed that the extended charge-separated states play the main role in the enhancement of the photocatalytic H₂ evolution activity of lanthanide-doped TiO₂ nanosheets with coexposed {001}/{101} facets.     

Enhancing the Photocatalytic Activity of Anatase TiO2 by Improving the Specific Facet‐Induced Spontaneous Separation of Photogenerated Electrons and Holes

Recently, it has been proven that directional flow of photogenerated charge carriers occurs on specific facets of TiO₂ nanocrystals. Herein, we demonstrate that the photocatalytic activity of anatase TiO₂ nanocrystals in both photoreduction and photooxidation processes can be enhanced by selectively depositing Pt nanoparticles on the {101} facets, which strengthens spontaneously surface‐induced separation between photogenerated electrons and holes in the photocatalysis process. An optimal ratio of the oxidative {001} facets to the reductive {101} facets exists with regard to the photocatalysis of the faceted TiO₂ nanocrystals, and this is crucial for balancing the recombination and redox reaction rates of photogenerated electrons and holes. The present work might help us gain deeper insight into the relation between the specific surface of semiconductor photocatalysts and their photocatalytic activities and provides us with a new route to design photocatalysts with high photocatalytic activity.     

Synthesis of {100} Facet Dominant Anatase TiO2 Nanobelts and the Origin of Facet‐Dependent Photoreactivity

Sword‐like anatase TiO₂ nanobelts exposed with 78 % clean {100} facets were synthesized and the facet‐dependent photoreactivity of anatase TiO₂ was investigated. By quantitative comparison with the reference {001} facets, the {100} facets possessed about ten‐times higher active sites density than that on {001} facets, resulting in higher photoreaction efficiency. After the active sites density normalization, the {100} and {001} facets exhibited distinct wavelength‐dependent photocatalytic performance, attributed to the anisotropic electronic structures in TiO₂ crystals.     

Graphite-like carbon deposited anatase TiO<Subscript>2</Subscript> single crystals as efficient visible-light photocatalysts

Graphite-like carbon deposited single-crystal anatase TiO₂ with exposed {001} facets was fabricated through a two-step solvothermal process by using glucose as carbon source. The physicochemical properties of the as-prepared samples were investigated by X-ray diffraction, Brunauer-Emmett-Teller, transmission electron microscopy, Raman, UV–vis diffuse reflectance spectra, electrochemical impedance spectroscopy and surface photovoltage spectroscopy. These results demonstrated that graphite-like carbon layers were deposited on the surface of TiO₂ single-crystal nanosheets with exposed highly reactive {001} facets via the dehydration of glucose during the process of hydrothermal treatment. The loading of the graphite-like carbon layers could effectively extend the light absorption edge of the single-crystal anatase TiO₂ nanosheets to visible light region and accelerate the separation of photo-generated electrons and holes, contributing an excellent visible-light driven photocatalytic performance to the graphite-like carbon deposited single-crystal anatase TiO₂ nanosheets for the degradation of methyl orange.     

Synthesis of Cs2.5H0.5PW12O40/TiO2 Nanocomposites with Dominant TiO2 {001} Facets and Related Photocatalytic Properties

TiO₂ nanosheets with dominant {001} facets, coupled with Cs_2.5H_0.5PW₁₂O₄₀, were successfully synthesized by a one‐step hydrothermal reaction. The photocatalytic activity of nanocatalysts was evaluated by the degradation of Rhodamine B under UV light irradiation. The results showed that both the addition of Cs_2.5H_0.5PW₁₂O₄₀ and the exposed {001} facets of TiO₂ have a positive effect on the photocatalytic activity. The improved photoactivity of nanocomposites in comparison with that of TiO₂ nanosheets could be attributed to the synergistic effect between Cs_2.5H_0.5PW₁₂O₄₀ and TiO₂ which facilitates the separation of photo‐induced hole‐electron pairs.     

锐钛矿(001)与(101)晶面在光催化反应中的作用

采用水热法制备了(001)和(101)晶面暴露的单晶锐钛矿TiO₂颗粒. 利用光还原沉积贵金属(Au, Ag, Pt)和光氧化沉积金属氧化物(PbO₂, MnO_x)的方法研究了暴露的锐钛矿(001)和(101)晶面在光催化中的作用. 通过透射电子显微镜(TEM)、扫描电子显微镜(STM)、能量色散X射线光谱仪(EDX)和X射线光电子能谱(XPS)的表征, 发现发生光还原反应生成的贵金属粒子主要沉积在暴露的锐钛矿(101)晶面上, 而发生光氧化反应产生的金属氧化物颗粒主要沉积在暴露的锐钛矿(001)晶面上. 此结果表明光激发产生的电子与空穴主要并分别分布在单晶锐钛矿TiO₂的(101)与(001)晶面上, 并在其上参与光催化还原反应和氧化反应. 同时也表明暴露的不同晶面对光生电荷具有分离效应. 基于本研究可以认为同时暴露分别进行氧化和还原反应的晶面可以有效促进光催化反应.     

Hierarchical TiO2 microspheres: synergetic effect of {001} and {101} facets for enhanced photocatalytic activity

Well-faceted nanocrystals of anatase TiO(2) with specific reactive facets have attracted extraordinary research interest due to their many intrinsic shape-dependent properties. In this work, hierarchical TiO(2) microspheres consisting of anatase nanosheets or decahedrons were synthesized by means of a facile hydrothermal technique; meanwhile, the percentage of {001} facets can be tuned from 82 to 45%. Importantly, by investigating the photo-oxidation reactions for ˙OH radical generation and photoreduction reactions for hydrogen evolution, the TiO(2) microspheres consisting of nano-decahedrons with 45% {001} facets show superior photoreactivity (more than 4.8-times) compared to the nanosheets with 82% {001} facets. By analyzing the results of scanning electron microscopy (SEM), photoluminescence (PL) and first-principles density functional theory (DFT) calculations, a model of charge separation between the well-formed {001} and {101} facets is proposed, and the enhanced photocatalytic efficiency is largely attributed to the efficient separation of photogenerated charges among the crystal facets co-exposed.     

Morphology‐Engineered Highly Active and Stable Ru/TiO2 Catalysts for Selective CO Methanation

Ru/TiO₂ catalysts exhibit an exceptionally high activity in the selective methanation of CO in CO₂‐ and H₂‐rich reformates, but suffer from continuous deactivation during reaction. This limitation can be overcome through the fabrication of highly active and non‐deactivating Ru/TiO₂ catalysts by engineering the morphology of the TiO₂ support. Using anatase TiO₂ nanocrystals with mainly {001}, {100}, or {101} facets exposed, we show that after an initial activation period Ru/TiO₂‐{100} and Ru/TiO₂‐{101} are very stable, while Ru/TiO₂‐{001} deactivates continuously. Employing different operando/in situ spectroscopies and ex situ characterizations, we show that differences in the catalytic stability are related to differences in the metal–support interactions (MSIs). The stronger MSIs on the defect‐rich TiO₂‐{100} and TiO₂‐{101} supports stabilize flat Ru nanoparticles, while on TiO₂‐{001} hemispherical particles develop. The former MSIs also lead to electronic modifications of Ru surface atoms, reflected by the stronger bonding of adsorbed CO on those catalysts than on Ru/TiO₂‐{001}.     

{001} facets dominated anatase TiO2: Morphology, formation/etching mechanisms and performance

Controllable growth of anatase TiO2 crystals with exposed high reactive crystal facets has aroused great attention in the fields of science and technology due to their unique structure-dependent properties. Recently, much effort has been paid to synthesize anatase TiO2 crystals with exposed high reactive {001} facets. Herein, we review the recent progress in synthesizing {001} facets dominated anatase TiO2 crystals with different morphologies by various synthetic methods. Furthermore, our review is mainly focused on the formation/etching mechanisms of {001} facets dominated anatase TiO2 crystals based on our and other studies. The extensive application potentials of the anatase TiO2 crystals with exposed {001} facets have been summarized in this review such as photocatalysis, photoelectrocatalysis, solar energy conversion, lithium ion battery, and hydrogen generation. Based on the current studies, we give some perspectives on the research topic. We believe that this comprehensive review on anatase TiO2 crystals with high reactive {001} facets can further promote the relative research in this field.     

Study of Oxygen Vacancies on Different Facets of Anatase TiO2

Anatase TiO₂ samples with different ratios of {101} to {001} facets were prepared with hydrothermal method and further treated under three specific calcination atmospheres (air, H₂, N₂). The characterization results indicate that {001} facets may generate more oxygen vacancies and more Ti³⁺ species than {101} facets.     

Effects of anatase TiO2 morphology and surface fluorination on environmentally relevant photocatalytic reduction and oxidation reactions

Aiming at clarifying the interplay on TiO₂ photoactivity between particle morphology and surface fluorination, the photocatalytic performance of anatase nanocrystals, characterized by a pseudo-spherical shape or a nanosheet structure, is investigated in both a reduction and an oxidation reaction, either in the absence or in the presence of added fluoride anions. Cr(VI) photocatalytic reduction is strongly favored by a large exposure of anatase {001} facets; however, surface fluorination leads in this case to a morphology-independent photoactivity decrease, due to the decreased adsorption of the reaction substrate. More interestingly, a beneficial synergistic effect between the platelet-like anatase morphology and TiO₂ surface fluorination is clearly outlined in Rhodamine B photocatalytic degradation, possibly resulting from the intrinsic ability of fluorinated {001} anatase facets of boosting ^?OH radical mediated oxidation paths, due to their larger amount of surface –OH groups, as revealed using Fourier-transform infrared spectroscopy.     

Photo-depositing Ru and RuO2 on Anatase TiO2 Nanosheets as Co-catalysts for Photocatalytic O2 Evolution from Water Oxidation

TiO₂ nanosheets mainly exposed (001) facet were prepared through a hydrothermal process with HF as the morphology-directing agent. Ru and RuO₂ species were loaded by photo-deposition methods to prepare the photocatalysts. The structural features of the catalysts were characterized by X-ray di raction, transmission electron microscopy, inductively cou-pled plasma atomic emission spectrum, and H₂ Temperature-programmed reduction. The photocatalytic property was studied by the O₂ evolution from water oxidation, which was examined with respect to the in uences of Ru contents as well as the oxidation and reduction treatments, suggesting the charge separation effect of the Ru species co-catalysts on di erent facets of TiO₂ nanosheets. In contrast to Ru/TiO₂ and RuO₂/TiO₂ with the single deposited co-catalyst, the optimized catalyst 0.5%Ru-1.0%RuO₂/TiO₂ with dual co-catalysts achieved a much improved catalytic performance, in terms of the synergetic effect of dual co-catalysts and the enhanced charge separation effect.     

Facile fabrication of anatase TiO2 microspheres on solid substrates and surface crystal facet transformation from {001} to {101}

Anatase TiO(2) microspheres with controlled surface morphologies and exposed crystal facets were directly synthesized on metal titanium foil substrates by means of a facile, one-pot hydrothermal method without use of any templating reagent. The obtained products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelecron spectroscopy (XPS), and the focused ion beam (FIB) technique. The sizes of the resultant microspheres ranged from 1.1 to 2.1 μm. The transformation of anatase TiO(2) microspheres with exposed {001} facets surface to nanosheets surface with {101} facets was achieved by simply controlling the hydrothermal reaction time. The anatase TiO(2) microspheres with exposed square-shaped plane {001} facets were obtained by controlling the reaction time at 1 h. The prolonged reaction time transforms the anatase TiO(2) microspheres with exposed square-shaped plane {001} facets to eroded {001} facets then to a nanosheet surface with exposed {101} facets. With hydrothermal synthesis, the surface morphological structure and crystal facets formation are highly dependent on dissolution/deposition processes, which can be strongly influenced by attributes, such as pH of the reaction media, the total concentration of dissolved and suspended titanium species, and the concentration of fluoride in the reaction solution. The changes of these attributes during the hydrothermal process were therefore measured and used to illustrate the morphology and crystal-facet transformation processes of anatase TiO(2) microspheres. The surface morphologies and crystal-facet transformations during hydrothermal processes were found to be governed by the compositional changes of the reaction media, driven by dynamically shifted dissolution/deposition equilibria. The photocatalytic activities of the photoanodes made of anatase TiO(2) microspheres were evaluated. The experimental results demonstrated that the photocatalytic activity of anatase TiO(2) microspheres with exposed {001} facets was found to be 1.5 times higher than that of the anatase TiO(2) microspheres with exposed {101} facets.     

Oxygen-Deficient Dumbbell-Shaped Anatase TiO2−x Mesocrystals with Nearly 100 % Exposed {101} Facets: Synthesis,Growth Mechanism,and Photocatalytic Performance

The development of hierarchical TiO₂ superstructures with new morphologies and intriguing photoelectric properties for utilizing solar energy is known to be an effective approach to alleviate the serious problems of environmental pollution. Herein, unique oxygen-deficient dumbbell-shaped anatase TiO_2−x mesocrystals (DTMCs) enclosed by nearly 100 % {101} facets were readily synthesized by mesoscale transformation in TiCl₃/acetic acid (HAc) mixed solution, followed by calcination under vacuum. These mesocrystals exhibited much higher photoreactivity toward removing the model pollutants methyl orange and Cr^VI than truncated tetragonal bipyramidal anatase nanocrystals (TNCs), anatase mesocrystals built from truncated tetragonal bipyramidal anatase nanocrystals (TTMCs), and anatase mesocrystals constructed by anatase nanocrystals with nearly 100 % exposed {101} facets (TMCs), revealing that both the oxidation and reduction abilities of anatase TiO₂ were simultaneously enhanced upon fabricating an oxygen-deficient mesocrystalline architecture with about 100 % exposed {101} facets. Further characterization illustrated that such an enhancement of photoreactivity was mainly due to the strengthened light absorption, boosted charge carrier separation, and nearly 100 % exposed {101} facets of the oxygen-deficient dumbbell-shaped anatase mesocrystals. This work will be useful for guiding the synthesis of oxygen-deficient ordered superstructures of metal oxides with desired morphologies and exposed facets for promising applications in environmental remediation.     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO2纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO2纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

Graphitic-C<Subscript>3</Subscript>N<Subscript>4</Subscript> quantum dots decorated {001}-faceted TiO<Subscript>2</Subscript> nanosheets as a 0D/2D composite with enhanced solar photocatalytic activity

Zero-dimensional (0D)/two-dimensional (2D) heterojunctions have attracted great attention in photocatalysis due to their superior interfacial effects. In this work, 0D g-C₃N₄ quantum dots (CNQDs) were firstly used to modify {001}-faceted 2D TiO₂ nanosheets by a simple solvothermal method. During the controlled growth of TiO₂ nanosheets with exposed reactive {001} facets, the CNQDs can be simultaneously assembled on the surface of TiO₂ nanosheets in a highly dispersive way. The 0D/2D composite containing only 0.5% of CNQDs shows the optimized solar photocatalytic activity for the degradation of rhodamine B and 4-chlorophenol. More importantly, the 0D/2D composite exhibits a better solar photocatalytic activity than the bulk g-C₃N₄/TiO₂ nanosheets composite. This improvement can be ascribed to the close interfacial contact and strong interaction between the highly dispersed CNQDs and the TiO₂ nanosheets, which could lead to efficient separation of the photogenerated electron–hole pairs, provide more catalytic active sites, and enhance the absorption of solar light. The 0D/2D composite also shows good stability for its practical applications.     

Modifications on reduced titanium dioxide photocatalysts: A review

A large variety of reduced titanium dioxide (TiO_2-x) materials have been reported recently. Reduced TiO₂, usually resulting from the removal of oxygen atoms or hydrogen incorporation, is proved to be efficient for achieving highly photocatalytic performance including photodegradation of organic compounds, hydrogen generation from water splitting, CO₂ reduction for CH₄ evolution, solar cells, etc. To further improve the properties and activities of TiO_2-x, a combination of the Ti³⁺ self-doping and other traditional modifications like nonmetals doping has been proposed in the past decades. This paper provides a general and critical review on the further modifications on reduced TiO₂ samples, including non-metal elements (N, B, S, F and I) doping, noble-metal (Au, Pt, Pd and Ag) and iron-group metal (Fe, Co and Ni) grafting, metal oxide compositing, carbon (nanotubes and graphene) and carbon-based-material compositing, special facets exposure (mainly dual {001}-{101} and {111}-{110} facets) of TiO_2-x and ordered structure controlling of TiO_2-x. These modifications enhance the physical and/or chemical properties of the reduced TiO₂, or create new features for the modified TiO_2-x samples, which finally leads to the enhancement of photocatalytic performance. Key examples such as N-doping, Au grafting and graphene-based compositing are discussed carefully, and the mechanisms for solar light enhancement, electron transfer and charge separation are also investigated. Finally, some challenging issues on TiO_2-x catalysts are also proposed to encourage new approaches for preparation of TiO_2-x catalysts with efficiently photocatalytic performance.     

Template‐Free Synthesis of Core–Shell TiO2 Microspheres Covered with High‐Energy {116}‐Facet‐Exposed N‐Doped Nanosheets and Enhanced Photocatalytic Activity under Visible Light

Core–shell TiO₂ microspheres possess a unique structure and interesting properties, and therefore, they have received much attention. The high‐energy facets of TiO₂ also are being widely studied for the high photocatalytic activities they are associated with. However, the synthesis of the core–shell structure is difficult to achieve and requires multiple‐steps and/or is expensive. Hydrofluoric acid (HF), which is highly corrosive, is usually used in the controlling high‐energy facet production. Therefore, it is still a significant challenge to develop low‐temperature, template‐free, shape‐controlled, and relative green self‐assembly routes for the formation of core–shell‐structured TiO₂ microspheres with high‐energy facets. Here, we report a template‐ and hydrofluoric acid free solvothermal self‐assembly approach to synthesize core–shell TiO₂ microspheres covered with high‐energy {116}‐facet‐exposed nanosheets, an approach in which 1,4‐butanediamine plays a key role in the formation of nanosheets with exposed {116} facets and the doping of nitrogen in situ. In the structure, nanoparticle aggregates and nanosheets with {116} high‐energy facets exposed act as core and shell, respectively. The photocatalytic activity for degradation of 2,4,6‐tribromophenol and Rhodamine B under visible irradiation and UV/Vis irradiation has been examined, and improved photocatalytic activity under visible light owing to the hierarchical core–shell structure, {116}‐plane‐oriented nanosheets, in situ N doping, and large surface areas has been found.     

Deposition of SnO2 on the Anatase TiO2 {105} Facets with High Photocatalytic Performance

Anatase TiO2 as a promising photocatalyst has been widely employed in the decontamination treatment of polluted water, air purification and water splitting. Coupling TiO2 with other semiconductor materials could further enhance the photocatalytic activity. Here, we successfully synthesized the SnOz/TiO2 catalyst by depositing SnO2 particles on the anatase TiO2 {105} facets through a gas phase oxidation process. The SnOz/TiO2 catalyst shows higher photocatalytic activity for decomposition of MB than that of the pure YiO2 catalyst. The enhanced photo- catalytic activity can be attributed to the efficient charge separation since TiO2 and SnO2 catalyst have staggered energy level.     

Synthesis and Photocatalytic Activity of TiO2/CdS Nanocomposites with Co-Exposed Anatase Highly Reactive Facets

In this work, TiO₂/CdS nanocomposites with co-exposed {101}/[111]-facets (NH4F-TiO2/CdS), {101}/{010} facets (FMA-TiO2/CdS), and {101}/{010}/[111]-facets (HF-TiO2/CdS and Urea-TiO2/CdS) were successfully synthesized through a one-pot solvothermal method by using [Ti₄O₉]²⁻ colloidal solution containing CdS crystals as the precursor. The crystal structure, morphology, specific surface area, pore size distribution, separation, and recombination of photogenerated electrons/holes of the TiO₂/CdS nanocomposites were characterized. The photocatalytic activity and cycling performance of the TiO₂/CdS nanocomposites were also investigated. The results showed that as-prepared FMA-TiO₂/CdS with co-exposed {101}/{010} facets exhibited the highest photocatalytic activity in the process of photocatalytic degradation of methyl orange (MO), and its degradation efficiency was 88.4%. The rate constants of FMA-TiO₂/CdS was 0.0167 min⁻¹, which was 55.7, 4.0, 3.7, 3.5, 3.3, and 1.9 times of No catalyst, CdS, HF-TiO₂/CdS, NH₄F-TiO₂/CdS, CM-TiO₂, Urea-TiO₂/CdS, respectively. The highest photocatalytic activity of FMA-TiO₂/CdS could be attributed to the synergistic effects of the largest surface energy, co-exposed {101}/{010} facets, the lowest photoluminescence intensity, lower charge-transfer resistance, and a higher charge-transfer efficiency.