Double Asymmetric Core Optimizes Crystal Packing to Enable Selenophene-based Acceptor with Over 18 % Efficiency in Binary Organic Solar Cells

Side-chain tailoring is a promising method to optimize the performance of organic solar cells (OSCs). However, asymmetric alkyl chain-based small molecular acceptors (SMAs) are still difficult to afford. Herein, we adopted a novel asymmetric n-nonyl/undecyl substitution strategy and synthesized two A-D₁A′D₂-A double asymmetric isomeric SMAs with asymmetric selenophene-based central core for OSCs. Crystallographic analysis indicates that AYT9Se11-Cl forms a more compact and order intermolecular packing compared to AYT11Se9-Cl , which contributed to higher electron mobility in neat AYT9Se11-Cl film. Moreover, the PM6 : AYT9Se11-Cl blend film shows a better morphology with appropriate phase separation and distinct face-on orientation than PM6 : AYT11Se9-Cl . The OSCs with PM6 : AYT9Se11-Cl obtain a superior PCE of 18.12 % compared to PM6 : AYT11Se9-Cl (17.52 %), which is the best efficiency for the selenium-incorporated SMAs in binary BHJ OSCs. Our findings elucidate that the promising double asymmetric strategy with isomeric alkyl chains precisely modulates the crystal packing and enhances the photovoltaic efficiency of selenophene-incorporated SMAs.     

catena‐Poly[4,4′‐bipyridinium [[cis‐di­chloro­manganese(II)]‐di‐μ‐chloro]], a novel manganese(II) coordination polymer with 4,4′‐bipyridinium

The title novel manganese(II) coordination polymer, {(C₁₀H₁₀N₂)[MnCl₄]}_n, consists of a one‐dimensional infinite zigzag chain composed of polymeric [MnCl₄]²⁻ units in which each Mn²⁺ ion is located on a twofold rotation axis and is coordinated to two terminal Cl atoms and four bridging chloro ligands. Adjacent Mn²⁺ ions are linked by double Cl bridges arranged about a centre of inversion, thus forming anionic chains of distorted edge‐sharing octa­hedra. Rows of approximately parallel 4,4′‐bipyridinium cations run side‐by‐side with the MnCl₄ chains. A two‐dimensional layer structure is constructed via hydrogen bonds and by additional π–π stacking inter­actions.     

(+)‐Geodin from Aspergillus terreus

The fungal metabolite (+)‐geodin [systematic name: (2R)‐methyl 5,7‐dichloro‐4‐hydroxy‐6′‐methoxy‐6‐methyl‐3,4′‐dioxospiro[benzofuran‐2,1′‐cyclohexa‐2′,5′‐diene]‐2′‐carboxylate], C₁₇H₁₂Cl₂O₇, was isolated from Aspergillus terreus. The crystal structure contains two independent molecules in the asymmetric unit. Molecules denoted 1 interact through O—H...O hydrogen bonds creating chains of molecules parallel to the crystallographic 2₁ screw axis. Molecules denoted 2 interact through an O...Cl halogen bond, also creating chains of molecules parallel to the crystallographic 2₁ screw axis. Molecules 1 and 2 interact through another O...Cl halogen bond. The two molecules are similar but molecules 2 have a slightly more planar cyclohexadiene ring than molecules 1. The absolute structure of (+)‐geodin has been unequivocally assigned with the spiro centre having the R configuration in both molecules. The structurally related (+)‐griseofulvin has an S configuration at the spiro centre, a difference of potential biological and biosynthetic relevance.     

NIR‐Absorbing Donor–Acceptor Based 1,1,4,4‐Tetracyanobuta‐1,3‐Diene (TCBD)‐ and Cyclohexa‐2,5‐Diene‐1,4‐Ylidene‐Expanded TCBD‐Substituted Ferrocenyl Phenothiazines

A series of unsymmetrical (D‐A‐D₁, D₁‐π‐D‐A‐D₁, and D₁‐A₁‐D‐A₂‐D₁; A=acceptor, D=donor) and symmetrical (D₁‐A‐D‐A‐D₁) phenothiazines ( 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f , and 5 f′ ) were designed and synthesized by a [2+2] cycloaddition–electrocyclic ring‐opening reaction of ferrocenyl‐substituted phenothiazines with tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The photophysical, electrochemical, and computational studies show a strong charge‐transfer (CT) interaction in the phenothiazine derivatives that can be tuned by varying the number of TCNE/TCNQ acceptors. Phenothiazines 4 b , 4 c , 4 c′ , 5 b , 5 c , 5 d , 5 d′ , 5 e , 5 e′ , 5 f and 5 f′ show redshifted absorption in the λ =400 to 900 nm region, as a result of a low HOMO–LUMO gap, which is supported by TD‐DFT calculations. The electrochemical study exhibits reduction waves at low potential due to strong 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) and cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD acceptors. The incorporation of cyclohexa‐2,5‐diene‐1,4‐ylidene‐expanded TCBD stabilized the LUMO energy level to a greater extent than TCBD.     

Nanopatterns of molecular spoked wheels as giant homologues of benzene tricarboxylic acids

Molecular spoked wheels with D_3h and C_s symmetry are synthesized by Vollhardt trimerization of C_2v-symmetric dumbbell structures with central acetylene units and subsequent intramolecular ring closure. Scanning tunneling microscopy of the D_3h-symmetric species at the solid/liquid interface on graphite reveals triporous chiral honeycomb nanopatterns in which the alkoxy side chains dominate the packing over the carboxylic acid groups, which remain unpaired. In contrast, C_s-symmetric isomers partially allow for pairing of the carboxylic acids, which therefore act as a probe for the reduced alkoxy chain nanopattern stabilization. This observation also reflects the adsorbate substrate symmetry mismatch, which leads to an increase of nanopattern complexity and unexpected templating of alkoxy side chains along the graphite armchair directions. State-of-the-art GFN-FF calculations confirm the overall structure of this packing and attribute the unusual side-chain orientation to a steric constraint in a confined environment. These calculations go far beyond conventional simple space-filling models and are therefore particularly suitable for this special case of molecular packing.

Scanning tunneling microscopy investigations of phenylene-based molecular spoked wheels with D_3h and C_s symmetries on graphite show the competitive or complementary effects of carboxylic acid groups and alkoxy chains on the nanopattern formation.     

Impact of regio-isomeric monochlorinated end groups on packing mode,miscibility, and photovoltaic performance of asymmetric selenophene-fused M-series acceptors

Optimal bulk-heterojunction (BHJ) morphology is crucial for efficient charge transport and good photovoltaic performance in organic solar cells (OSCs). Yet, the correlation between chemical structures of nonfullerene acceptors (NFAs) and molecular interaction in the BHJ blends remains opaque. Herein, we study three isomeric NFAs referred to as MQ1-x (x = β, γ, or δ) that shared an asymmetric selenophene-fused heteroheptacene backbone end-capped by two monochlorinated end groups. Remarkably, miscibility between the polymer donor of PM6 and MQ1-x successively elevates as the chlorine atoms move from β-, to γ-, to δ-position of terminals. Combined with the varied molecular crystallinity of these NFAs, diverse BHJ morphologies are observed in their blend films. As a result, the MQ1-δ-based devices present the highest PCE of 12.08% owing to the efficient charge dissociation and transport induced by the compact molecular packing and optimal BHJ morphology. Our investigation provides a new insight in the material design that has a good balance in molecular packing and film morphology for high-performance OSCs.     

Enhancing the performances of all-small-molecule ternary organic solar cells via achieving optimized morphology and 3D charge pathways

With the emergence of non-fullerene acceptors (NFAs), the power conversion efficiencies (PCEs) of all-small-molecule organic solar cells (ASM-OSCs) have been significantly improved. However, due to the strong crystallinities of small molecules, it is much more challenging to obtain the ideal phase separation morphology and efficient charge transport pathways for ASM-OSCs. Here, a high-efficiency ternary ASM-OSC has been successfully constructed based on H11/IDIC-4F system by introduction of IDIC with a similar backbone as IDIC-4F but weak crystallinity. Notably, the addition of IDIC has effectively suppressed large-scale phase aggregation and optimized the morphology of the blend film. More importantly, the molecular orientation has also been significantly adjusted, and a mixed face-on and edge-on orientation has formed, thus establishing a more favorable three-dimensional (3D) charge pathways in the active layer. With these improvements, the enhanced short-circuit current density (J_SC) and fill factor (FF) of the ternary system have been achieved. In addition, because of the high lowest unoccupied molecular orbital (LUMO) energy level of IDIC as well as the alloyed structure of the IDIC and IDIC-4F, the promoted open circuit voltage (V_OC) of the ternary system has also been realized.     

Thermo-crosslinkable molecular glasses towards the low k materials at high frequency

Two molecular glasses having allyl side chains and thermo-crosslinkable benzocyclobutene (BCB) groups have been successfully synthesized. These molecules display good solubility in common organic solvents and show a typical glass-forming behavior of having no melting point and keeping a complete amorphous state. The thermally cured molecular glasses exhibit low dielectric constant (D_k) and dielectric loss (D_f) at 10 GHz, as well as low water uptake (Wa) even when they are immersed in boiling water for 72 h. Among them, a fluoro-containing molecule exhibits the best properties, showing D_k of 2.53, D_f of 1.93 × 10^?3 and Wa of 0.19%, respectively, indicating that fluoro groups can efficiently improve the dielectric properties of the molecules. A controlling test indicates that the allyl side chains make the molecules possessing glass-forming properties.     

Impact of symmetry-breaking of non-fullerene acceptors for efficient and stable organic solar cells

The concurrent enhancement of short-circuit current (J_SC) and open-circuit voltage (V_OC) is a key problem in the preparation of efficient organic solar cells (OSCs). In this paper, we report efficient and stable OSCs based on an asymmetric non-fullerene acceptor (NFA) IPC-BEH-IC2F. The NFA consists of a weak electron-donor core dithienothiophen[3,2-b]-pyrrolobenzothiadiazole (BEH) and two kinds of strong electron-acceptor (A) units [9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) with a tricyclic fused system and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC2F)]. For comparison, the symmetric NFAs IPC-BEH-IPC and IC2F-BEH-IC2F were characterised. The kind of flanking A unit significantly affects the light absorption features and electronic structures of the NFAs. The asymmetric IPC-BEH-IC2F has the highest extinction coefficient among the three NFAs owing to its strong dipole moment and highly crystalline feature. Its highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels lie between those of the IPC-BEH-IPC and IC2F-BEH-IC2F molecules. The IPC group also promotes molecular packing through the tricyclic π-conjugated system and achieves increased crystallinity compared to that of the IC2F group. Inverted-type photovoltaic devices based on p-type polymer:NFA blends with PBDB-T and PM6 polymers as p-type polymers were fabricated. Among all these devices, the PBDB-T:IPC-BEH-IC2F blend device displayed the best photovoltaic properties because the IPC unit provides balanced electronic and morphological characteristics. More importantly, the PBDB-T:IPC-BEH-IC2F-based device exhibited the best long-term stability owing to the strongly interacting IPC moiety and the densely packed PBDB-T:IPC-BEH-IC2F film. These results demonstrate that asymmetric structural modifications of NFAs are an effective way for simultaneously improving the photovoltaic performance and stability of OSCs.

A 9H-indeno[1,2-b]pyrazine-2,3-dicarbonitrile (IPC) moiety in asymmetric non-fullerene acceptors promotes the formation of a densely packed crystalline structure, enabling efficient and long-term stable organic solar cells.     

Normalkoordinatenanalyse an heteroleptischen Hexahalogenorhenaten(1V) der Punktsymmetrie C4V

Normal Coordinate Analysis on Heteroleptic Hexahalorhenates(1V) with Point Symmetry C_4v Normal coordinate analyses, based on a general valence force field, for 8 complexes [ReX^.Y₄Z′]^2?, C_4v, X^. = F, Cl, Br, I; Y = Cl, Br, I; Z′ = Cl, Br, I, reveal that the force fields may be well approximated by characteristic structural elements: ReY₄ plane, trans-weakened ReX^. and trans-strengthened ReZ′ bonds. For the ReY₄ plane the same valence force constants are valid as for the homoleptic species [ReY₆]^2? (F = 3.23, Cl = 1.67, Br = 1.33, I = 0.80 mdyn/Å). Due to the increasing trans influence F < Cl < Br < I for asymmetric axes X^.ReZ′ the force constants are mutual lowered at ReX^. bonds, up to 10% in case of ReF^., and enhanced at ReZ′ bonds up to 15% for ReI′. Using the data determined for the structural groups the vibrational frequencies of different mixed halorhenates(IV) can be calculated with reliability of a few cm^?1.     

Asymmetric molecular engineering in recent nonfullerene acceptors for efficient organic solar cells

Nonfullerene acceptors (NFAs), which usually possess symmetric skeletons, have drawn great attention in recent years due to their pronounced advantages over the fullerene counterparts. Moreover, breaking the symmetry of NFAs could fine tune the molecular dipole, solubility, energy level, intermolecular interaction, molecular packing, crystallinity, etc., and give rise to improved photovoltaic performance. Currently, there are three main strategies for the design of asymmetric NFAs. This review highlights the recent advances of high-performance asymmetric NFAs and briefly outlooks the materials exploration for the future.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Reactivity of the Lithium Salt of 4H-Cyclopenta[2,1-b:3,4-b']dithiophene

The regioselectivity in reactions of the lithium salt of 4H-cyclopenta[2,1-b:3,4-b']dithiophene with various electrophilic agents [SiMe₃Cl, SnMe₃Cl, D₂O, Re(CO)₅Br] is discussed in terms of the charge and orbital control concepts.     

电场对金属串配合物M3(dpa)4Cl2 (M=Co,Rh, Ir; dpa=dipyridylamide)结构的影响

应用密度泛函理论PBE0 方法研究具有分子导线潜在应用的金属串配合物M₃(dpa)₄Cl₂ (1: M=Co, 2: M=Rh, 3: M=Ir; dpa=dipyridylamide)在电场作用下的几何和电子结构. 结果表明: 配合物基态均是二重态. 1和2的M₃⁶⁺金属链形成三中心三电子σ键, 3 中M₃⁶⁺形成三中心四电子σ键且存在弱的δ键. 随金属原子周期数增大其M―M键增强、LUMO与HOMO能隙减小、金属原子的反铁磁耦合减弱以至消失且自旋密度向配体的离域增强. 在Cl4→Cl5 电场作用下, 低电势端的M3－Cl5 键缩短, 高电势端的M2―Cl4 键增长, M―M平均键长略为缩短, M―M键增强, 有利于分子线的电子传递; 分子能量降低, 偶极矩线性增大. 低电势端Cl5的负电荷向高电势端Cl4 转移, 且3 中金属原子的正电荷由高电势端向低电势端的转移较明显, 自旋电子由低电势端向高电势端金属原子移动, 但桥联配体dpa^-与M和Cl 所在的分子轴间没有电荷转移. 电场使LUMO与HOMO能隙减小, 有利于分子的电子输运. 随金属原子周期数增大, 电场作用下M―M平均键长变化减小, LUMO、HOMO的能级交错现象减少.     

Blue‐light‐emitting polyfluorene functionalized with triphenylamine and cyanophenylfluorene bipolar side chains

A new bipolar conjugated polyfluorene copolymer with triphenylamine and cyanophenylfluorene as side chains, poly{[9,9‐di(triphenylamine)fluorene]‐[9,9‐dihexyl‐fluorene]‐[2,7‐bis(4′‐cyanophenyl)‐9,9′‐spirobifluorene]} ( PTHCF ), was synthesized for studying the polymer backbone emission. Its absolute weight‐average molecular weight was determined as 4.85 × 10⁴ by using gel permeation chromatography with a multiangle light scattering detector. In contrast to the electronic absorption spectrum in dilute solution, the absorbance of PTHCF in thin film was slightly blue shifted. By comparison of the solution and thin‐film photoluminescence (PL) spectra, a red shift of Δλ = 8–9 nm was observed in the thin‐film PL spectrum. The HOMO and LUMO energy levels of the resulting polymer were electrochemically estimated as ?5.68 and ?2.80 eV, respectively. Under the electric‐field intensity of 4.8 × 10⁵ V cm^?1, the obtained hole and electron mobilities were 2.41 × 10^?4 and 1.40 × 10^?4 cm² V^?1 s^?1, respectively. An electroluminescence device with configuration of ITO/PEDOT:PSS/ PTHCF _70%+PBD_30%/CsF/Ca/Al exhibited a deep‐blue emission as a result of excitons formed by the charges migrating along the full‐fluorene main chain. The incorporation of the bipolar side chains into the polymer structure prevented the intermolecular interaction of the fluorene moieties, balance charge injection/transport, and thereby improve the polymer backbone emission. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

An X‐ray powder investigation of catena‐poly[copper(II)‐di‐μ‐chloro‐κ41:2Cl‐μ‐1,5‐dimethyl‐1H‐tetra­zole‐κ2N3:N4]

The crystal structure of the polymeric title complex, [CuCl₂(C₃H₆N₄)]_n, has been solved from laboratory X‐ray powder diffraction data collected at room temperature. The structural model obtained was refined with the Rietveld method using geometric soft restraints. There are two Cu atoms, two Cl atoms and one 1,5‐dimethyl­tetra­zole ligand in the asymmetric unit. Both Cu atoms lie on inversion centres and adopt essentially elongated octa­hedral coordination. Within the octa­hedra, the elongated axial positions are occupied by Cl atoms, while two Cl and two N atoms (N3 and N4 of the tetra­zole ring) are in equatorial sites. Each Cl atom forms an asymmetric bridge between neighbouring Cu atoms, which are also bridged via the N3—N4 bond of the tetra­zole ring. These bridges result in the formation of polymeric chains, running along the a axis, with weak C—H⋯Cl hydrogen bonds crosslinking the chains.     

Fabrication of vertical alignment liquid crystal cell without forming a conventional polyimide-alignment layer

Two series of asymmetric banana-shaped compounds have been synthesized and studied. In the 1,3-phenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the lack of symmetry was derived solely from the difference in length of the two terminal alkoxy chains. In the 3,4′-biphenylene bis[4-(4′-alkoxybenzoyloxy)]benzoate series the asymmetric nature originates from the 3,4′-substitution of the central biphenyl group and from the difference in length of the two terminal chains. All the melting points of the asymmetrical compounds in the series with the central phenyl unit are lower than those of the symmetrical compounds. The liquid crystalline B₁ or B₂ phase was retained in all cases. In the series with the central biphenyl unit the compounds with the shortest chain attached to the para-position of the central biphenyl unit have the lowest melting points. A significant lowering of the melting points in comparison with the symmetrically substituted compounds, however, could not be achieved. All the compounds of both series show a layer spacing which is comparable to those of the symmetrically substituted parent compounds. The observed switching behaviour of both the symmetric and asymmetric compounds with a B₂ phase was antiferroelectric.     

Strong Ligand Stabilization Based on π-Extension in a Series of Ruthenium Terpyridine Water Oxidation Catalysts

The substitution behavior of the monodentate Cl ligand of a series of ruthenium(II) terpyridine complexes (terpyridine (tpy)=2,2′:6′,2′′-terpyridine) has been investigated. ¹H NMR kinetic experiments of the dissociation of the chloro ligand in D₂O for the complexes [Ru(tpy)(bpy)Cl]Cl ( 1 , bpy=2,2’-bipyridine) and [Ru(tpy)(dppz)Cl]Cl ( 2 , dppz=dipyrido[3,2-a:2′,3′-c]phenazine) as well as the binuclear complex [Ru(bpy)₂(tpphz)Ru(tpy)Cl]Cl₃ ( 3 b , tpphz=tetrapyrido[3,2-a:2′,3′-c:3′′,2′′-h:2′′′,3′′′-j]phenazine) were conducted, showing increased stability of the chloride ligand for compounds 2 and 3 due to the extended π-system. Compounds 1 – 5 ( 4 =[Ru(tbbpy)₂(tpphz)Ru(tpy)Cl](PF₆)₃, 5 =[Ru(bpy)₂(tpphz)Ru(tpy)(C₃H₈OS)/(H₂O)](PF₆)₃, tbbpy=4,4′-di-tert-butyl-2,2′-bipyridine) are tested for their ability to run water oxidation catalysis (WOC) using cerium(IV) as sacrificial oxidant. The WOC experiments suggest that the stability of monodentate (chloride) ligand strongly correlates to catalytic performance, which follows the trend 1 > 2 > 5 ≥ 3 > 4 . This is also substantiated by quantum chemical calculations, which indicate a stronger binding for the chloride ligand based on the extended π-systems in compounds 2 and 3 . Additionally, a theoretical model of the mechanism of the oxygen evolution of compounds 1 and 2 is presented; this suggests no differences in the elementary steps of the catalytic cycle within the bpy to the dppz complex, thus suggesting that differences in the catalytic performance are indeed based on ligand stability. Due to the presence of a photosensitizer and a catalytic unit, binuclear complexes 3 and 4 were tested for photocatalytic water oxidation. The bridging ligand architecture, however, inhibits the effective electron-transfer cascade that would allow photocatalysis to run efficiently. The findings of this study can elucidate critical factors in catalyst design.     

Homo- und Hetero-Zweikernkomplexe des D2h-symmetrischen Bis(chelat)-Liganden 2,2′-Bipyrimidin mit den elektronenreichen Metallfragmenten Mo(CO)4, Re(CO)3Cl, [Cu(PPh3)2]+ und [Ru(bpy)2]2+

Homo- and Heterodinuclear Complexes of the D_2h-symmetric Bis(chelate) Ligand 2,2′-Bipyrimidine with Electron-Rich Metal Fragments Mo(CO)₄, Re(CO)₃Cl, [Cu(PPh₃)₂]⁺, and [Ru(bpy)₂]²⁺ All homo- and heterodinuclear complexes (L_nM)(μ-bpym)(ML_n)′, bpym = 2,2′-bipyrimidine, ML_n (ML_n)′ = Mo(CO)₄, Re(CO)₃Cl, [Cu(PPh₃)₂]⁺, [Ru(bpy)₂]²⁺, have been synthesized and studied by cyclic voltammetry, absorption spectroscopy, and by electron spin resonance of singly reduced forms. The individual capabilities of the low-valent metal fragments to undergo oxidation and to shift the reduction potential of the bpym π acceptor ligand on coordination combine to result in variable electrochemical potential differences. After consideration of different Franck-Condon factors, absorption intensities, additional low-lying unoccupied orbitals of the bridging acceptor ligand and solvatochromic effects, we have assigned the considerably varying metal-to-ligand charge transfer transitions in the visible.     

Unlocking Reversible Silicon Redox for High-Performing Chlorine Batteries

Chlorine (Cl)-based batteries such as Li/Cl₂ batteries are recognized as promising candidates for energy storage with low cost and high performance. However, the current use of Li metal anodes in Cl-based batteries has raised serious concerns regarding safety, cost, and production complexity. More importantly, the well-documented parasitic reactions between Li metal and Cl-based electrolytes require a large excess of Li metal, which inevitably sacrifices the electrochemical performance of the full cell. Therefore, it is crucial but challenging to establish new anode chemistry, particularly with electrochemical reversibility, for Cl-based batteries. Here we show, for the first time, reversible Si redox in Cl-based batteries through efficient electrolyte dilution and anode/electrolyte interface passivation using 1,2-dichloroethane and cyclized polyacrylonitrile as key mediators. Our Si anode chemistry enables significantly increased cycling stability and shelf lives compared with conventional Li metal anodes. It also avoids the use of a large excess of anode materials, thus enabling the first rechargeable Cl₂ full battery with remarkable energy and power densities of 809 Wh kg⁻¹ and 4,277 W kg⁻¹, respectively. The Si anode chemistry affords fast kinetics with remarkable rate capability and low-temperature electrochemical performance, indicating its great potential in practical applications.