Manipulating active layer morphology of molecular donor/polymer acceptor based organic solar cells through ternary blends

The development of molecular donor/polymer acceptor blend(MD/PA)-type organic solar cells(OSCs) lags far behind other type OSCs. It is due to the large-size phase separation morphology of MD/PAblend, which results from the high crystallinity of molecular donors. In this article, to suppress the crystallinity of molecular donors, we use ternary blends to develop OSCs based on one polymer acceptor(P-BNBP-f BT) and two molecular donors(DR3 TBDTT and BTR) with similar chemical structures.The ternary OSC exhibits a power conversion efficiency(PCE) of 4.85%, which is higher than those of the binary OSCs(PCE=3.60% or 3.86%). To our best knowledge, it is the first report of ternary MD/PA-type OSCs and this PCE is among the highest for MD/PA-type OSCs reported so far. Compared with the binary blends, the ternary blend exhibits decreased crystalline size and improved face-on orientation of the donors. As a result, the ternary blend exhibits improved and balanced charge mobilities, suppressed charge recombination and increased donor/acceptor interfacial areas, which leads to the higher shortcircuit current density. These results suggest that using ternary blend is an effective strategy to manipulate active layer morphology and enhance photovoltaic performance of MD/PA-type OSCs.     

Organic solar cells based on small molecule donor and polymer acceptor

Small molecule donor/polymer acceptor(SD/PA)-type organic solar cells(OSCs) have attracted widespread attention in recent years due to the continuing power conversion efficiency(PCE) growth, near 10%, and the excellent thermal stability for the practical applications. However, the development of SD/PA-type OSCs lags far behind that of polymer donor/small molecule acceptor(PD/SA)-type OSCs, which are also based on the combination of small molecule and polymer, with the PCEs exceeding 18%. The rea...     

Design,Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra‐Narrow Band Gap

The design of narrow band gap (NBG) donors or acceptors and their application in organic solar cells (OSCs) are of great importance in the conversion of solar photons to electrons. Limited by the inevitable energy loss from the optical band gap of the photovoltaic material to the open‐circuit voltage of the OSC device, the improvement of the power conversion efficiency (PCE) of NBG‐based OSCs faces great challenges. A novel acceptor–donor–acceptor structured non‐fullerene acceptor is reported with an ultra‐narrow band gap of 1.24 eV, which was achieved by an enhanced intramolecular charge transfer (ICT) effect. In the OSC device, despite a low energy loss of 0.509 eV, an impressive short‐circuit current density of 25.3 mA cm⁻² is still recorded, which is the highest value for all OSC devices. The high 10.9 % PCE of the NBG‐based OSC demonstrates that the design and application of ultra‐narrow materials have the potential to further improve the PCE of OSC devices.     

Design,Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra‐Narrow Band Gap

The design of narrow band gap (NBG) donors or acceptors and their application in organic solar cells (OSCs) are of great importance in the conversion of solar photons to electrons. Limited by the inevitable energy loss from the optical band gap of the photovoltaic material to the open‐circuit voltage of the OSC device, the improvement of the power conversion efficiency (PCE) of NBG‐based OSCs faces great challenges. A novel acceptor–donor–acceptor structured non‐fullerene acceptor is reported with an ultra‐narrow band gap of 1.24 eV, which was achieved by an enhanced intramolecular charge transfer (ICT) effect. In the OSC device, despite a low energy loss of 0.509 eV, an impressive short‐circuit current density of 25.3 mA cm⁻² is still recorded, which is the highest value for all OSC devices. The high 10.9 % PCE of the NBG‐based OSC demonstrates that the design and application of ultra‐narrow materials have the potential to further improve the PCE of OSC devices.     

Impact of A–D–A-Structured Dithienosilole- and Phenoxazine-Based Small Molecular Material for Bulk Heterojunction and Dopant-Free Perovskite Solar Cells

Herein, the synthesis of the novel acceptor–donor–acceptor (A–D–A)-structured small molecule Si-PO-2CN based on dithienosilole (DTS) as building block flanked by electron-rich phenoxazine (POZ) units, which are terminated with dicyanovinylene, is presented. Si-PO-2CN showed unique electrochemical and photophysical properties and has been successfully employed in perovskite solar cells (PSCs) as well as in bulk heterojunction organic solar cells (OSCs). The PSCs fabricated with dopant-free Si-PO-2CN as hole-transport material (HTM) exhibited a power conversion efficiency (PCE) of 14.1 % (active area=1.02 cm²). Additionally, a PCE of 5.6 % has been achieved for OSCs, which employed Si-PO-2CN as p-type donor material when blended with a [6,6]-phenyl C71 butyric acid methyl ester (PC₇₁BM) acceptor. The versatile application of Si-PO-2CN provides a pathway for further implementation of DTS-based building blocks in solar cells for designing new molecules.     

Layer-by-Layer Organic Solar Cells Enabled by 1,3,4-Selenadiazole-Containing Crystalline Small Molecule with Double-Fibril Network Morphology

A double-fibril network of the photoactive layer morphology is recognized as an ideal structure facilitating exciton diffusion and charge carrier transport for high-performance organic solar cells (OSCs). However, in the layer-by-layer processed OSCs (LbL-OSCs), polymer donors and small molecule acceptors (SMAs) are separately deposited, and it is challenging to realize a fibril network of pure SMAs with the absence of tight interchain entanglement as polymers. In this work, crystalline small molecule donors (SMDs), named TDZ-3TR and SeDZ-3TR, were designed and introduced into the L8-BO acceptor solution, forcing the phase separation and molecular fibrilization. SeDZ-3TR showed higher crystallinity and lower miscibility with L8-BO acceptor than TDZ-3TR, enabling more driving force to favor the phase separation and better molecular fibrilization of L8-BO. On the other hand, two donor polymers of PM6 and D18 with different fibril widths and lengths were put together to optimize the fibril network of the donor layer. The simultaneously optimization of the acceptor and donor layers resulted in a more ideal double-fibril network of the photoactive layer and an impressive power conversion efficiency (PCE) of 19.38 % in LbL-OSCs.     

A non-fullerene acceptor enables efficient P3HT-based organic solar cells with small voltage loss and thickness insensitivity

The large D core of DFPCBR results in efficient P3HT-based OSCs with a high V_OC and thickness insensitivity.     

基于非富勒烯小分子受体Y6的有机太阳能电池

随着给/受体材料的不断发展,有机太阳能电池的器件效率不断取得进展.特别是非富勒受体分子Y6的出现,使单结有机太阳能电池的效率突破了15％.Y6已经应用到了有机太阳能电池各个方面并且极大提升了其性能.本综述主要总结了Y6在二元、三元和四元、逐层印刷、柔性、叠层和半透明等有机太阳能电池方面的研究情况,以及基于Y6三线态的有...     

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.     

13.34 % Efficiency Non‐Fullerene All‐Small‐Molecule Organic Solar Cells Enabled by Modulating the Crystallinity of Donors via a Fluorination Strategy

Non‐fullerene all‐small‐molecule organic solar cells (NFSM‐OSCs) have shown potential as OSCs, owing to their high purity, easy synthesis and good reproducibility. However, challenges in the modulation of phase separation morphology have limited their development. Herein, two novel small molecular donors, BTEC‐1F and BTEC‐2F, derived from the small molecule DCAO3TBDTT, are synthesized. Using Y6 as the acceptor, devices based on non‐fluorinated DCAO3TBDTT showed an open circuit voltage (V_oc) of 0.804 V and a power conversion efficiency (PCE) of 10.64 %. Mono‐fluorinated BTEC‐1F showed an increased V_oc of 0.870 V and a PCE of 11.33 %. The fill factor (FF) of di‐fluorinated BTEC‐2F‐based NFSM‐OSC was improved to 72.35 % resulting in a PCE of 13.34 %, which is higher than that of BTEC‐1F (61.35 %) and DCAO3TBDTT (60.95 %). To our knowledge, this is the highest PCE for NFSM‐OSCs. BTEC‐2F had a more compact molecular stacking and a lower crystallinity which enhanced phase separation and carrier transport.     

A novel AH-D-A-type phase junction material to improve photovoltaic performance and device stability in fullerene OSCs

In order to boost power conversion efficiency (PCE) and operation stability of organic solar cells (OSCs), we propose a new idea of phase junction materials (PJMs) used as a photoactive layer component to improve device performance and stability. For this purpose, a novel PJM of H-TRC8 based on rhodanine unit was designed with a conjugated A_H-D-A framework. Here, A_H is a hydrogen-donating electron acceptor unit, D-A is an electron donor-acceptor unit. It is found that H-TRC8 has a good carrier-transporting ability, as well as definite hydrogen-bond and D-A interaction with donor/acceptor materials. While H-TRC8 is added into the PBDB-T/PC₆₀BM blend film with 1.0 vol% DIO (1,8-diiodooctane), the resulting blend film exhibited an enhanced absorption and improved morphology. The intermolecular hydrogen bond between H-TRC8 and PBDB-T plays an important role for them, which is confirmed via FT-IR spectra and 2D ¹H NMR. As a result, the PBDB-T/PC₆₀BM-based devices with 1.25 wt% H-TRC8 and 1.0 vol% DIO exhibit a significantly improved PCE of 8.06%, which is increased by 20.6% in comparison to that in the binary devices with 1.0 vol% DIO only (PCE = 6.68%). Furthermore, the device stability is significantly enhanced with only 43% PCE roll-off at 150 °C for 120 h. This work indicates that A_H-D-A-type PJMs are promising photovoltaic materials used as photoactive-layer components to achieve high-performance fullerene OSCs with high device stability.     

Rylene diimide and dithienocyanovinylene copolymers for polymer solar cells

Two polymers containing(E)-2,3-bis(thiophen-2-yl)acrylonitrile(CNTVT) as a donor unit, perylene diimide(PDI) or naphthalene diimide(NDI) as an acceptor unit, are synthesized by the Stille coupling copolymerization, and used as the electron acceptors in the solution-processed organic solar cells(OSCs). Both polymers exhibit broad absorption in the region of 300–850 nm. The LUMO energy levels of the resulted polymers are ca. –3.93 eV and the HOMO energy levels are –5.97 and –5.83 eV. In the binary blend OSCs with PTB7-Th as a donor, PDI polymer yields the power conversion efficiency(PCE) of up to 1.74%, while NDI polymer yields PCE of up to 3.80%.     

Fluorination strategy enables greatly improved performance for organic solar cells based on polythiophene derivatives

The power conversion efficiencies(PCEs) of organic solar cells(OSCs) have reached 18% recently,which have already met the demand of practical application.However,these outstanding results were generally achieved with donor-acceptor(D-A) type copolymer donors,which can hardly fulfill the low-cost largescale production due to their complicated synthesis processes.Therefore,developing polymer donors with simple chemical structures is urgent for realizing low-cost OSCs.Polythiophene(PT) derivatives are currently regarded as promising candidates for such kind of donor materials,which has been illustrated in many works.In this work,two new alkylthio substituted PT derivatives,P301 and P302,were synthesized and tested as donors in the OSCs using Y5 as the accepto r.In comparison,the introduction of fluorine atoms on the backbone of P302 can not only downshift the energy levels,but also greatly improve the phase separation morphologies of the active layers,which is ascribed to the enhanced aggregation effect and the reduced miscibility with the non-fullerene acceptor.As a result,the P302:Y5-based OSC exhibits a significantly improved PCE of 9.65% than that of P301:Y5-based one,indicating the important role of fluorination in the construction of efficient PT derivative donors.     

Ternary organic solar cells based on polymer donor,polymer acceptor and PCBM components

In this work,ternary organic solar cells(OSCs)combining a fullerene derivative PC71BM with a nonfullerene acceptor N2200-F blended with a polymer donor PM6 were reported.Compared with the binary systems,the highest power conversion efficiency(PCE)of 8.11%was achieved in ternary solar cells with 30 wt%N2200-F content,mainly due to the improved short-circuit current density(Jsc)and fill factor(FF).Further studies showed that the improved Jsc could attribute to the complementary abso rption of the two acceptors and the enhanced FF was originated from the higher hole mobility and the fine-tuned morphology in the ternary system.These results demonstrate that the combination of fullere ne and nonfullerene acceptors in ternary organic solar cells is a promising approach to achieve high-performance OSCs.     

Influence of donor:acceptor ratio on charge transfer dynamics in non-fullerene organic bulk heterojunctions

The donor:acceptor(D:A) blend ratio plays a very important role in affecting the progress of charge transfer and energy transfer in bulk heterojunction(BHJ) orga nic solar cells(OSCs).The proper D:A blend ratio can provide maximized D/A interfacial area for exciton dissociation and appro p riate domain size of the exciton diffusion length,which is beneficial to obtain high-performance OSCs.Here,we comprehensively investigated the relationship between various D:A blend ratios and the charge transfer and energy transfer mechanisms in OSCs based on PBDB-T and non-fullerene acceptor IT-M.Based on various D:A blend ratios,it was found that the ratio of components is a key factor to suppress the formation of triplet states and recombination energy losses.Rational D:A blend ratios can provide appropriate donor/accepter surface for charge transfer which has been powerfully verified by various detailed experimental results from the time-resolved fluorescence measurement and transient absorption(TA) spectroscopy.Optimized coherence length and crystallinity are verified by grazing incident wide-angle X-ray scattering(GIWAXS) measurements.The results are bene ficial to comprehend the effects of various D:A blend ratios on charge transfer and energy transfer dynamics and provides constructive suggestions for rationally designing new materials and feedback for photovoltaic performance optimization in non-fullerene OSCs.     

Critical Role of Molecular Electrostatic Potential on Charge Generation in Organic Solar Cells

Revealing the charge generation is a crucial step to understand the organic photovoltaics. Recent development in non‐fullerene organic solar cells (OSCs) indicates efficient charge separation even with negligible energetic offset between the donor and acceptor materials. These new findings trigger a critical question concerning the charge separation mechanism in OSCs, traditionally believed to result from sufficient energetic offset between the polymer donor and fullerene acceptor. We propose a new mechanism, which involves the molecular electrostatic potential, to explain efficient charge separation in non‐fullerene OSCs. Together with the new mechanism, we demonstrate a record efficiency of ~12% for systems with negligible energetic offset between donor and acceptor materials. Our analysis also rationalizes different requirement of the energetic offset between fullerene‐based and non‐fullerene OSCs, and paves the way for further design of OSC materials with both high photocurrent and high photovoltage at the same time.     

支链带有富勒烯的聚噻吩和齐聚噻吩及其光伏电池研究进展

可溶性聚噻吩和富勒烯(主要是C60)及其衍生物,是聚合物太阳能电池中被广泛使用的给体和受体材料,它们之间的相容性和富勒烯的聚集效应对于太阳能电池能量转换效率有很大影响。将富勒烯与聚噻吩通过共价键连接在一起,可解决它们的共混膜中的相分离问题,有望提高器件效率,是未来有机和聚合物光伏材料研究的一个重要方向。本文按主链是聚噻吩或齐聚噻吩将这种连有富勒烯的材料分为两类,介绍了这些材料的合成方法、电化学性质及基于这些材料的太阳能电池器件近几年来的研究进展。     

13.34 % Efficiency Non-Fullerene All-Small-Molecule Organic Solar Cells Enabled by Modulating the Crystallinity of Donors via a Fluorination Strategy

Non-fullerene all-small-molecule organic solar cells (NFSM-OSCs) have shown potential as OSCs, owing to their high purity, easy synthesis and good reproducibility. However, challenges in the modulation of phase separation morphology have limited their development. Herein, two novel small molecular donors, BTEC-1F and BTEC-2F, derived from the small molecule DCAO3TBDTT, are synthesized. Using Y6 as the acceptor, devices based on non-fluorinated DCAO3TBDTT showed an open circuit voltage (V_oc) of 0.804 V and a power conversion efficiency (PCE) of 10.64 %. Mono-fluorinated BTEC-1F showed an increased V_oc of 0.870 V and a PCE of 11.33 %. The fill factor (FF) of di-fluorinated BTEC-2F-based NFSM-OSC was improved to 72.35 % resulting in a PCE of 13.34 %, which is higher than that of BTEC-1F (61.35 %) and DCAO3TBDTT (60.95 %). To our knowledge, this is the highest PCE for NFSM-OSCs. BTEC-2F had a more compact molecular stacking and a lower crystallinity which enhanced phase separation and carrier transport.     

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Optimizing the components and morphology within the photoactive layer of organic solar cells(OSCs) can significantly enhance their power conversion efficiency(PCE). A new A-D-A type non-fullerene acceptor IDMIC-4F is designed and synthesized in this work, and is employed as the third component to prepare high performance ternary solar cells. IDMIC-4F can form fibrils after solution casting, and the presence of this fibrillar structure in the PBDB-T-2F:BTP-4F host confines the growth of donors and acceptors into fine domains, as well as acting as transport channels to enhance electron mobility. Single junction ternary devices incorporating 10 wt% IDMIC-4F exhibit enhanced light absorption and balanced carrier mobility, and achieve a maximum PCE of 16.6% compared to 15.7% for the binary device, which is a remarkable efficiency for OSCs reported in literature. This non-fullerene acceptor fibril network strategy is a promising method to improve the photovoltaic performance of ternary OSCs.     

Two star-shaped small molecule donors based on benzodithiophene unit for organic solar cells

Star-shaped small molecules have attracted great attention for organic solar cells(OSCs) because they have three-dimensional charge-transport characteristics, strong light absorption capacities and easily tunable energy levels. Herein, three-and four-armed star-shaped small molecule donors, namely BDT-3 Th and BDT-4 Th, respectively, have been successfully designed and synthesized, which used benzodithiophene(BDT) as the central unit. The two star-shaped intermediates(2 a and 2 b) could be simul...