共查询到20条相似文献,搜索用时 15 毫秒
1.
Tetsuo Hino Naoto Inoue Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》2006,44(1):395-405
The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (Mn's), 10% weight loss decomposition temperatures, glass-transition temperatures (Tg's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by Mn, Tg, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)3-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006 相似文献
2.
Motohisa Azechi Kozo Matsumoto Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》2013,51(7):1651-1655
Anionic ring‐opening polymerizations of methyl 4,6‐O‐benzylidene‐2,3‐O‐carbonyl‐α‐D ‐glucopyranoside (MBCG) were investigated using various anionic polymerization initiators. Polymerizations of the cyclic carbonate readily proceeded by using highly active initiators such as n‐butyllithium, lithium tert‐butoxide, sodium tert‐butoxide, potassium tert‐butoxide, and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene, whereas it did not proceed by using N,N‐dimethyl‐4‐aminopyridine and pyridine as initiators. In a polymerization of MBCG (1.0 M), 99% of MBCG was converted within 30 s to give the corresponding polymer with number‐averaged molecular weight (Mn) of 16,000. However, the Mn of the polymer decreased to 7500 when the polymerization time was prolonged to 24 h. It is because a backbiting reaction might occur under the polymerization conditions. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013 相似文献
3.
Rui Chen Ying Wang Linlin Zhu Zhen Zhang 《Journal of polymer science. Part A, Polymer chemistry》2021,59(23):2972-2979
An ultrafast approach for controlled synthesis of well-defined polysulfonamides is established through organocatalytic anionic ring-opening polymerization (ROP) of N-sulfonyl aziridine in the melt. Several different organobases are investigated, and it is found that N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) catalyzed ROP of 2-methyl-N-tosylaziridine (TsMAz) gives the desired polymer, while 1,4-diazabicyclo[2.2.2]octane (DABCO) and 1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) initiate the polymerization along with initiator to produce uncontrolled polymers. Using PMDETA as the catalyst, poly(2-methyl-N-tosylaziridine) with molecular weight over 100 kg/mol can be synthesized in less than 90 s. Various initiators, including carboxylic acid, N-sulfonyl amide, unactivated amine, phenol, and thiol, are applicable for this protocol to give the molecular weight and end-group controlled polymers under the open-flask condition. Combining this ultrafast ROP with ring-opening metathesis polymerization (ROMP), a brush copolymer is facile synthesized. This approach allows the ultrafast metal-free synthesis of polysulfonamide and expands the scope of initiators for the ROP of N-sulfonyl aziridines. 相似文献
4.
S. Antoun Ph. Teyssi R. Jrme 《Journal of polymer science. Part A, Polymer chemistry》1997,35(17):3637-3644
The anionic polymerization of methacrylate monomers has been investigated with lithium dialkylamides as initiators in THF and toluene, respectively. Theoretical arguments and previous studies of mixed aggregates of lithiated organic compounds support the complexity of these systems. Lithium diisopropylamide (LDA) shows the highest initiation efficiency (e.g., f = 75% in THF at −78°C). Interestingly enough, lithium chloride has a remarkable beneficial effect on the methacrylates polymerization in THF at −78°C, due to the formation of 1 : 1 mixed dimer with LDA, which promotes a well-controlled anionic polymerization (Mw/Mn = 1.05) with a high initiation efficiency (94%). The less bulky lithium–diethylamide (LDEA) is much less efficient (f = 26%), essentially as a result of some associated “dormant” species and side reactions on the carbonyl group of MMA. Although various types of ligands have been screened, no remarkable improvement of LDEA efficiency has been observed. Lithium bis(trimethylsilyl)amide (LTMSA) has also been used to increase the steric hindrance of the initiator. This compound is, however, unable to initiate the methacrylates polymerization, more likely because of a too low basicity and a too strong Li—N bond. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3637–3644, 1997 相似文献
5.
Anaëlle Bolley Samir Mameri Samuel Dagorne 《Journal of polymer science. Part A, Polymer chemistry》2020,58(9):1197-1206
The present study details the highly effective and controlled ring-opening polymerization (ROP) of α-chloro-ε-caprolactone ( 1 , αClεCL), a cyclic ester that has been little explored thus far in ROP catalysis, using Zn- and Al-based catalysts [Zn(C6F5)2(toluene)] ( 4 ), [N,N′-bis(3,5-di-tert-butylsalicylidene)1,3-diaminopropanato]aluminium(III)benzyloxide ( 5 ) and [N,N′-bis(3,5-di-tert-butylsalicylidene)1,3-diamino-2,2′-dimethylpropanato]aluminium(III)benzyloxide] ( 6 ). Chain-length-controlled PαClεCL material is produced under solution ROP conditions, as deduced from GPC, NMR, MALDI-TOF, and kinetic data. In contrast, the ROP of 1 is ill-defined under bulk ROP conditions due to partial thermal degradation of the polymer chain (presumably through C–Cl cleavage), reflecting the limited stability of PαClεCL. The Al Catalysts 5 and 6 are highly active ROP catalysts of αClεCL at room temperature (TOF up to 2,400 hr−1) to afford well-defined P(αClεCL). In the case of Catalyst 6 , carrying out the ROP of αClεCL under immortal conditions (with BnOH as chain transfer agent) is clearly beneficial to ROP activity and control, with no apparent side-reaction of chloro-functionalized PCL chains as the ROP proceeds. The controlled character of these ROPs was further exploited for the production of chain-length-controlled PLLA-b-PαClεCL diblocks through sequential ROP of l -lactide and αClεCL, affording copolymers with improved thermal and biodegradable properties. 相似文献
6.
Atsushi Sudo Satoshi Uchino Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》2000,38(7):1073-1082
A living polymerization of ethylphenylketene (EPK) was accomplished. When polymerization of EPK was carried out with butyllithium as an initiator in tetrahydrofuran (THF) at −20 °C, EPK was completely consumed within 5 min, and the corresponding polyester with narrow molecular weight distribution (Mw /Mn ∼ 1.1) was obtained almost quantitatively. Kinetic study of the polymerization at −78 °C revealed that conversion of EPK agreed with the first‐order kinetic equation, and that Mn of the polymer increased in virtually direct proportion to the conversion. Along with these results, successful results in postpolymerization at −20 °C strongly supported living mechanism of the present polymerization. Further, lithium alkoxides having a methoxy group, styryl moiety, and nitroxyl radical, also successfully initiated polymerization of EPK to afford the corresponding polymers having functional initiating ends. In the polymerization with varying feed ratio [EPK]0/[initiator]0, the linear relationship between the feed ratio and Mn of the obtained polymer was observed, while maintaining narrow Mw /Mn. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1073–1082, 2000 相似文献
7.
Qi-Yuan Wang Meng-Xue Cao Xiao-Wei Kan An Lv Fu-Sheng Du Zi-Chen Li 《Journal of polymer science. Part A, Polymer chemistry》2022,60(13):1976-1987
Monomer 1,4-oxathian-2-one ( OX ) was synthesized by a one pot two-step method, and it was oxidized to the sulfone ester monomer, 1,4-oxathian-2-one-4,4-dioxide ( OX-SO 2 ). Three organic catalysts, 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), and diphenyl phosphate (DPP) were screened for the ring-opening polymerization (ROP) of OX in dichloromethane at 30°C. It was found that OX has a high polymerizability, the TBD-catalyzed ROP is very fast but with serious side reactions, the DBU-catalyzed ROP is moderately controlled, and the DPP-catalyzed ROP is well controlled until the polymerization reach equilibrium. Bulk ROP of OX-SO 2 was achieved with stannous octoate ((Sn[Oct]2) at 130°C. Poly(OX) is a semicrystalline polyester (Tm = 40-60°C, Tg = −39.6°C), while Poly(OX-SO 2 ) is a highly crystalline polyester(Tg = 55°C, Tm = 211°C with decomposition). Kinetics experiments of OX and δ-valerolactone (VL) revealed that VL polymerized faster than OX with DPP as the catalyst. Thermodynamic parameters of the ROP of OX and VL under identical conditions were measured; the ROP of OX is thermodynamically more favorable than that of VL. A series of random copolymers of OX and VL was prepared using TBD as the catalyst and confirmed that the in-chain heteroatom greatly affected the crystallization of the copolymers. 相似文献
8.
Shigeyoshi Kanoh Atsushi Takemura Koh-ichi Fukuda Charoen Chinwanitcharoen Masatoshi Motoi 《Journal of polymer science. Part A, Polymer chemistry》2004,42(18):4570-4579
Aluminum benzyl alcoholate bis(2,6-di-tert-butyl-4-methylphenolate) (BnOAD), which was prepared through the mixing of equimolar amounts of benzyl alcohol and methylaluminum bis(2,6-di-tert-butyl-4-methylphenolate) (MAD), successfully polymerized four-membered cyclic ethers in a coordinate anionic ring-opening manner. The polymerization of 3-(4-bromobutoxymethyl)-3-methyloxetane (OxBr) with 5 mol % BnOAD proceeded slowly in toluene at 25 °C and produced sufficiently high-molecular-weight poly(OxBr) in a moderate yield in 24 h. The polymerization was greatly accelerated by the addition of a sterically hindered Lewis acid such as MAD, and this resulted in a nearly quantitative polymer yield within 24 h. In sharp contrast, conventional cationic polymerization with boron trifluoride etherate as a typical Lewis acid initiator produced low-molecular-weight poly(OxBr) along with a substantial amount of the cyclic tetramer. The polymerization of the simplest unsubstituted oxetane with BnOAD resulted in failure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4570–4579, 2004 相似文献
9.
Kozo Matsumoto Hironobu Shimazu Masaki Deguchi Hitoshi Yamaoka 《Journal of polymer science. Part A, Polymer chemistry》1997,35(15):3207-3216
Anionic polymerizations of 1,1-dimethylsilacyclobutane, 1,1-diethylsilacyclobutane and 1-methyl-1-phenylsilacyclobutane were investigated. Addition of 5 mol % of butyllithium to a solution of 1,1-dimethylsilacyclobutane in THF-hexane (1 : 1) at −48°C provided poly(1,1-dimethylsilabutane) in 99% yield. Mn and Mw/Mn of the obtained polymer were 2400 and 1.10. This polymerization proceeded with a living nature. Mn increased in proportion as the yield of polymer increased. Addition of the second fresh feed of the monomer to the reaction mixture restarted polymerization of the second monomer at the same rate as in the initial stage. Addition of styrene to the living poly(1,1-dimethylsilabutane) provided a poly(1,1-dimethylsilabutane-b-styrene) block copolymer. It was also found that a polymerization of 1,1-diethylsilacyclobutane in THF-hexane at −48°C showed a living nature. In contrast, a polymerization of 1-methyl-1-phenylsilacyclobutane in THF at −78°C did not show a living nature. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3207–3216, 1997 相似文献
10.
Zbigniew Jedliński 《Journal of polymer science. Part A, Polymer chemistry》2002,40(13):2158-2165
Single-electron-transfer (SET) and two-electron-transfer reactions and their mechanisms were examined in the anionic polymerization of vinyl monomers and in the ring-opening polymerization of lactones. SET resulted in the formation of radical anions or enolates at the initiation step of styrene or lactone polymerization with naphthalene sodium as a catalyst. However, alkali-metal supramolecular complexes such as M+crown–M− (M = Na or K) were able to transfer two electrons to both these monomers to form carbanions as reactive intermediates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2158–2165, 2002 相似文献
11.
Hideki Misaka Eisuke Tamura Kosuke Makiguchi Kensuke Kamoshida Ryosuke Sakai Toshifumi Satoh Toyoji Kakuchi 《Journal of polymer science. Part A, Polymer chemistry》2012,50(10):1941-1952
For the living ring‐opening polymerization (ROP) of epoxy monomers, the catalytic activity of organic superbases, tert‐butylimino‐tris(dimethylamino)phosphorane, 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2Λ5,4Λ5‐catenadi(phosphazene), 2,8,9‐triisobutyl‐2,5,8,9‐tetraaza‐1‐phosphabicyclo[3.3.3]undecane, and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris(dimethylamino)phosphoranylidenamino]‐2Λ5,4Λ5‐catenadi(phosphazene) (t‐Bu‐P4), was confirmed. Among these superbases, only t‐Bu‐P4 showed catalytic activity for the ROP of 1,2‐butylene oxide (BO) to afford poly(1,2‐butylene oxide) (PBO) with predicted molecular weight and narrow molecular weight distribution. The results of the kinetic, post‐polymerization experiments, and MALDI‐TOF MS measurement revealed that the t‐Bu‐P4‐catalyzed ROP of BO proceeded in a living manner in which the alcohol acted as the initiator. This alcohol/t‐Bu‐P4 system was applicable to the glycidol derivatives, such as benzyl glycidyl ether (BnGE) and t‐butyl glycidyl ether, to afford well‐defined protected polyglycidols. The α‐functionalized polyethers could be obtained using different functionalized initiators, such as 4‐vinylbenzyl alcohol, 5‐hexen‐1‐ol, and 6‐azide‐1‐hexanol. In addition, the well‐defined cyclic‐PBO and PBnGE were successfully synthesized using the combination of t‐Bu‐P4‐catalyzed ROP and click cyclization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
12.
Satoru Amou Shin Nishimura Akio Takahashi Tokio Hagiwara Hiroshi Hamana Tadashi Narita 《Journal of polymer science. Part A, Polymer chemistry》1999,37(3):341-347
N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were Mn = 2750–3300 (Mw/Mn = 1.2–3.3) and Mn = 11300 (Mw/Mn = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999 相似文献
13.
Wenyi Luo Ying Wang Yaocheng Jin Zhen Zhang Chuande Wu 《Journal of polymer science. Part A, Polymer chemistry》2020,58(15):2116-2125
An effective approach for fast synthesis of well-defined star-shaped poly(2-methyl-N-tosylaziridine)s was developed by one-pot tandem ring-opening polymerization (ROP) of N-sulfonyl aziridines with trimethylsilyl azide (TMSN3) and “click” reaction with alkynes. Azido terminated polyaziridines (α-N3-PAzs) could be achieved via ROP of N-sulfonyl aziridines with TMSN3 in the presence of organic superbases. The catalytic efficiency of organobases, including 1,4-diazabicyclo[2.2.2]octane (DABCO), 1,8-diazabicyclo[5.4.0]-7-undecene (DBU), 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD), 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), and N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), was evaluated, and all of them except TBD afforded “living”/controlled ROP of 2-methyl-N-tosylaziridines (TsMAz). Star-shaped polyaziridines were then fastly synthesized by the one-pot tandem strategy. During the reaction process, PMDETA catalyzed ROP first, then was triggered to be a ligand by adding CuBr for “click” reaction. Well-defined 3- and 4-arm star P(TsMAz)s were successfully prepared, and subsequently desulfonylated to give star-shaped polypropylenimines (PPIs). PPI stars exhibited intrinsic photoluminescence properties from the polyamine arms. 相似文献
14.
Jyuhou Matsuo Shinji Nakano Fumio Sanda Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》1998,36(14):2463-2471
Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10−6 and 0.8 × 10−6 s−1, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the 1H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the 13C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998 相似文献
15.
Yen Wei Edward J. Connors Xinru Jia Ce Wang 《Journal of polymer science. Part A, Polymer chemistry》1998,36(5):761-771
Free radical ring-opening polymerization of 2-methylene-1,3-dioxepane (MDP) in the presence of 2,2,6,6-tetramethyl-1-piperidinyloxy free radical (TEMPO) has been achieved to afford a chain polyester (PMDP) with di-t-butyl peroxide (DTBP) as an initiator at 125°C. The polydispersity of the polymers decreases as the concentration of TEMPO is increased. At high TEMPO concentrations, the polydispersity as low as 1.2 was obtained, which is below the theoretical lower limit for a conventional free radical polymerization. A linear relationship between the number-average molecular weight (Mn) and the monomer conversion was observed with the best-fit line passing very close to the origin of the Mn-conversion plot. The isolated and purified TEMPO-capped PMDP polymers have been employed to prepare chain extended polymers upon addition of more MDP monomer. These results are suggestive of the “living” polymerization process. A possible polymerization mechanism might involve thermal homolysis of the TEMPO-PMDP bonds followed by the addition of the monomers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 761–771, 1998 相似文献
16.
Yuxia Liu Charles U. Pittman 《Journal of polymer science. Part A, Polymer chemistry》1997,35(17):3655-3671
Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (Tc) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl2(PPh3)3, BF3, TiCl4, H2SO4, H2SO4 supported on carbon, (CH3)2CHCOOH, and CH3COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an SN2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (Mn ≤ 103) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh3)3Cl2-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh3)3Cl2) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF3OEt2. The copolymer obtained displayed a broad molecular weight distribution; M̄n = 6,490, M̄w = 15,100, M̄z = 44,900. This polymer had about 47 mol % of ( Me2SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997 相似文献
17.
Gue Seon Lee Jeung Gon Kim 《Journal of polymer science. Part A, Polymer chemistry》2020,58(10):1450-1455
Highly efficient syntheses of poly(alkyl methacrylate)-based brush polymers were accomplished via a facile group transfer polymerization (GTP) and a consecutive grafting-through ring-opening metathesis polymerization. The GTP system, composed of the norbornenyl-methyl trimethylsilyl ketene acetal initiator and the N-(trimethylsilyl) bis(trifluoromethanesulfonyl)imide catalyst, rapidly and quantitatively generates norbornenyl-terminated poly(alkyl methacrylate) macromonomers with very narrow polydispersities (Mw/Mn < 1.10). The ring-opening metathesis polymerization of methacrylate macromonomers using Grubbs third generation catalyst successfully generated a group of methacrylate-based brush polymers, which assured the high quality of the macromonomers obtained from GTP. 相似文献
18.
The anionic polymerization of 2-ethylhexyl acrylate (EtHA) initiated with the complex butyllithium/lithium-tert-butoxide (BuLi/t-BuOLi) was investigated at ?60°C in a medium of various solvating power, i.e., in mixtures of toluene and tetrahydrofuran and in neat tetrahydrofuran. With increasing amount of THF in the mixture the attainable limiting conversion of polymerization decreases; the monomer can be polymerized quantitatively only in a toluene/THF mixture (9/1). Molecular weights of the polymers thus obtained, their distribution, and initiator efficiency are not appreciably affected by the polymerization medium. The molecular weight distribution of the products is medium-broad (Mw/Mn = 2–2.4), with a hint of bimodality. The 1H-13C-NMR, and IR spectra suggest that during the polymerization there is neither any perceptible reesterification of the polymer with the alkoxide nor transmetalation of the monomer with the initiator. In a suitable medium, autotermination of propagation proceeds to a limited extent only, predominantly via intramolecular cyclization of propagating chains; in a medium with a higher content of polar THF, it prevails and terminates propagation before the polymerization of the monomer has been completed. © 1992 John Wiley & Sons, Inc. 相似文献
19.
N. Nugay T. Nugay R. Jrme Ph. Teyssi 《Journal of polymer science. Part A, Polymer chemistry》1997,35(2):361-369
Some primary acrylates, such as methyl, ethyl, n-butyl, and n-nonyl acrylate (MA, EA, nBuA and nNonA, respectively) have been anionically polymerized by using diphenylmethyl lithium (DPMLi) as an initiator, in the presence of a chelating μ-σ dual ligand, i.e., a polydentate lithium alkoxide, at low temperature. It has been found that lithium 2-(2-methoxyethoxy) ethoxide (LiOEEM) is a very efficient ligand in preventing the anionic polymerization of these monomers from being disturbed by significant secondary transfer and termination reactions. Even for the difficult cases of ethyl and methylacrylate, that approach provides high polymerization yields and low polydispersity, allowing the molecular weight to be predetermined. LiOEEM/initiator molar ratio, solvent polarity, temperature and monomer concentration have proved to be key parameters in the control of the polymerization process. The efficiency of that control is however dependent on the monomer structure and improves with the length of the n-alkyl substituent, i.e., MA < EA < nBuA < nNonA. © 1997 John Wiley & Sons, Inc. 相似文献
20.
Beom‐Goo Kang Nam‐Goo Kang Jae‐Suk Lee 《Journal of polymer science. Part A, Polymer chemistry》2011,49(24):5199-5209
The anionic polymerization behaviors of ethynylstyrene derivatives containing isomeric pyridine moieties, 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( A ), 3‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ), and 4‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( C ), were investigated in the identical conditions. The anionic polymerization of A – C was performed with (diphenylmethyl)potassium (Ph2CHK) in tetrahydrofuran (THF) at ?78 °C. The polymerization of A proceeded quantitatively at –78 °C for 4 h, and the resulting poly( A ) possessed predictable molecular weights (Mn = 3300–68,500) and narrow molecular weight distributions (MWDs) (Mw/Mn = 1.04–1.11). In contrast, the anionic polymerization of B was not performed at –78 °C for 4 h due to the occurrence of side reactions. The monomer B was quantitatively recovered after the reaction. In the polymerization of C performed at –78 °C for 6 h, observed Mn values of the resulting poly( C ) were in good agreement with calculated molecular weights based on monomer to initiator ratios, but the MWDs were somewhat broad (Mw/Mn = 1.23–1.31). To estimate the reactivity of A and to characterize its living nature, the block copolymerization of A with 2‐vinylpyridine (2VP) and methyl methacrylate (MMA) was performed. The well‐defined block copolymers, poly(2VP)‐b‐poly( A ) and poly( A )‐b‐poly(MMA), were successfully synthesized without any additives. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献