H/D exchange reactions of protonated diglycine; an electrospray ionization–flow tube reactor experiment

The H/D exchange reactions of protonated diglycine, GLY₂H⁺, with ND₃ were studied under thermal conditions with a combination of an electrospray ion source and a flow tube reactor. Consecutive exchange of the five labile hydrogens is observed with increasing flow rate of ND₃. Collision complexes corresponding to the consecutive H/D exchanges are monitored for the first time. The role of multiple exchanges in a single collision event with ND₃ is probed. Results will be discussed in the light of previously suggested mechanisms of H/D exchange of GLY₂H⁺ with deuterated ammonia.     

O−• chemical ionization of carbonyl compounds

The negative ion chemical ionization mass spectra of twentyeight C₄ to C₇ carbonyl compounds were recorded using the oxide radical anion O^?? as reagent ion. As noted earlier, the reactions occurring include H⁺ abstraction, H ₂ ^+? abstraction, H? atom displacement, and alkyl radical displacement. In addition, the [M?2H]^? ions fragment further by alkyl radical elimination. The relative importance of these reactions depends strongly on molecular structure, with the result that isomer distinction frequently is possible. Where this is not possible, as for isomeric aldehydes, the collisional charge inversion mass spectra of common product ions provides isomer distinction. The H ₂ ^+? abstraction reaction is shown to involve abstraction not only of two hydrogens from the same α-carbon but also, in part, abstraction of one hydrogen from each α-carbon.     

Peculiarities of dissociative ionization of alkylcyclopentadienyl nitrosyl π-complexes of nickel

The decomposition of alkylcyclopentadienyl nitrosyl -complexes of nickel, (C₅H₄R)(NO)Ni (R=H, Et,i-Pr, CH₂Ph), under the action of electron impact has been studied. The nature of the nitrosyl ligand has been shown to be the factor determining the main fragmentation pathway which involves the abstraction of an NO molecule. The effect of the nature of the ligand on the ability of the molecular ion (C₅H₄R)LNi⁺ (L=C₅H₄R, C₅H₅, C₃H₅, NO) to rearrange with hydrogen atom migration from one ligand to another has been considered. The structure of the alkyl group R determines a competing fragmentation pathway involving cleavage of the -C-C bond with respect to the cyclopentadienyl ring in the substituent.Translated fromIzyestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1985–1988, November, 1993.     

Comparison of negative chemical ionization and electron impact ionization in gas chromatography–mass spectrometry of endocrine disrupting pesticides

The study of pesticide residues belonging to endocrine disrupting chemicals (EDCs) (23 analytes of different chemical classes – organochlorines, organophosphates, pyrethroids, dicarboximides, phtalamides, dinitroanilines, pyrazole, triazinone) in apple matrix with conventional capillary GC–NCI-MS (with methane as reagent gas) in comparison to EI ionization is presented. For sample preparation QuEChERS method was applied. The lowest calibration levels (LCLs) for all pesticides were determined in both modes. Calibration in the NCI mode was performed at the concentration levels from 0.1 to 500 μg kg⁻¹ (R² > 0.999) and for EI in the range from 5 to 500 μg kg⁻¹ (R² > 0.99). From LCLs the instrumental limits of detection (LODs) and quantification (LOQs) were calculated. Chemometric study of pesticide signals in two MS modes was performed. Repeatability of all measurements, expressed by the relative standard deviations of absolute peak areas was better than 10% for the majority of compounds. Significantly lower values were obtained for the NCI mode.     

Perspective of alkaline zinc-based flow batteries

Energy storage technologies have been identified as the key in constructing new electric power systems and achieving carbon neutrality, as they can absorb and smooth the renewables-generated electricity. Alkaline zinc-based flow batteries are well suitable for stationary energy storage applications, since they feature the advantages of high safety, high cell voltage and low cost. Currently, many alkaline zinc-based flow batteries have been proposed and developed, e.g., the alkaline zinc–iron flo...     

Determination of enthalpy of ionization of water from 250 to 350° C

The enthalpy changes at zero ionic strength (H°) for the ionization of water (H₂O=H⁺+OH^–) were determined by flow calorimetry from the heats of mixing of aqueous NaOH and HCl solutions in the temperature range 250 to 350°C. Pitzer ion-interaction models developed by other workers were used to calculate enthalpies of dilution of aqueous NaOH, HCl, and NaCl solutions for the extrapolation of H values from the conditions of the experiment to infinite dilution. Equations are derived for thermodynamic quantities (log K, H°, S°, C _p ^° and V°) for the ionization of water using the H° values determined in this study from 250 to 350°C and literature log K and H° values from 0 to 225°C. Smoothed values of log K, H°, S°, C _p ^° , and V° are presented at rounded temperatures from 0 to 350°C and at the saturation pressure of water for each temperature. The equations in the present study provide a better representation of experimental thermodynamic data from 0 to 350°C than the Marshall-Franck equation.     

Analysis of ancient Greco–Roman cosmetic materials using laser desorption ionization and electrospray ionization mass spectrometry

Microsamples of pink cosmetic powders from the Greco–Roman period were analyzed using two complementary analytical approaches for identification of the colouring agents (lake pigments originally manufactured from madder plants with an inert binder, usually a metallic salt) present in the samples. The first technique was a methanolic acidic extraction of the archaeological samples with an additional ethyl acetate extraction of the anthraquinone-type colouring agents which were identified using high performance liquid chromatography coupled to electrospray ionization with high resolution mass spectrometry (LC–ESI–HRMS), and the second was direct analysis of a microsample by laser desorption ionization–mass spectrometry (LDI–MS). The latter technique is well suited when the quantity of samples is very low. This soft ionization technique enables the detection of very small quantities of compounds using the combination of positive and negative-ion modes. It was also successfully applied for the direct analysis of some laboratory-made reference compounds. However, the presence of lead in one of these ancient samples induced a spectral suppression phenomenon. In this case and conditional on a sufficient quantity of available sample, the former method is better adapted for the characterization of these anthraquinone-type molecules. This study also confirmed that purpurin, munjistin, and pseudopurpurin are the principal colouring agents present in these ancient cosmetic powders constituted from madder plants. Presented at the Annual French National Symposium on Mass Spectrometry, Electrophoresis and Proteomics, 20–23 September 2007 in Pau, France.     

Direct coupling of a flow–flow electromembrane extraction probe to LC-MS

A fully integrated and automated electromembrane extraction LC-MS (EME-LC-MS) system has been developed and characterized. Hyphenation of a flow–flow EME probe to LC-MS was accomplished by using an in-built 10-port switching valve of the LC-MS system. The 10-port switching valve decoupled the high pressure of the UHPLC-system from the low pressure required for operation of the EME-probe by automated switching between a sample extraction/analysis and a sample load position. In the sample load position the extracted analytes were loaded into a HPLC sample loop. By switching the valve to the sample extraction/analysis position the setup allowed simultaneous analysis of previously loaded analytes while extracting a new sample. Performance of the system was characterized with respect to precision and linearity (RSD < 2.5%, R²: 0.998) and the setup was applied for studying the in-vitro metabolism of methadone by rat liver microsomes. As the metabolic reaction proceeded, methadone and its metabolites were extracted and analyzed in parallel by LC-MS using either isocratic or gradient elution. Compared to a conventional in-vitro metabolism analysis based on protein precipitation followed by LC-MS analysis the fully automated EME-LC-MS system offers a significant time saving and in addition demonstrates increased sensitivity as the analytes were automatically enriched during the extraction process. The experiment revealed 6 to 16 times higher S/N ratios of the EME-LC-MS method compared to protein precipitation followed by LC-MS and thus concomitantly lower LOD and LOQ. The setup integrates a complete analytical workflow of rapid extraction, enrichment, separation and detection of analytes in a fully automated manner. These attributes make the developed system a powerful alternative approach for a wide range of analytical applications.     

Generation of multiple charged ions: Photoemission electron impact ionization

Ｔｉｍｅ＿ｏｆ＿ｆｌｉｇｈｔｍａｓｓｓｐｅｃｔｒｏｍｅｔｅｒ(ＴＯＦＭＳ)ｈａｓｂｅｅｎｆｉｎｄｉｎｇａｎｉｎｃｒｅａｓｉｎｇｌｙｗｉｄｅｖａｒｉｅｔｙｏｆａｐｐｌｉｃａｔｉｏｎｓ.Ｉｔｓｓｅｎｓｉｔｉｖｉｔｙ,ｈｉｇｈａｎａｌｙｓｉｓｓｐｅｅｄ,ａｎｄｌａｒｇｅｍａｓｓｒａｎｇｅｍａｋｅｉｔｏｎｅｏｆｔｈｅｍｏｓｔｆａｖｏｒａｂｌｅｍａｓｓｓｐｅｃｔｒｏｍｅｔｅｒｔｅｃｈｎｉｑｕｅ.Ｈｏｗｅｖｅｒ,ｔｈｅｋｅｙｆａｃｔｏｒｆｏｒｔｈｅＴＯＦＭＳｉｓｔｈｅｐｕｌｓｅｄｉｏｎｉｚｏｒｔｈａｔｒｅｓｔｒｉ…     

Applications of ambient electric arc ionization mass spectrometry in saline samples

Salinity tolerance of ambient electric arc ionization（AEAI） was evaluated by comparing electrospray ionization for various samples at Na Cl concentrations from 0 to 1000 mmol/L. AEAI-mass spectrometry（AEAI-MS） exhibited an excellent signal intensity even at Na Cl concentrations of 1000 mmol/L, while the ESI-MS had no signal because high salinity has a strong inhibitory effect on analytes. The sodium adduct was verified using Li Cl instead of Na Cl. AEAI-MS successfully quantified saline samples ...     

Determination of diquat by flow injection–chemiluminescence

A simple, economic, sensitive and rapid method for the determination of the pesticide diquat was described. This new method was based on the coupling of flow injection analysis methodology and direct chemiluminescent detection; to the authors’ knowledge, this approach had not been used up to now with this pesticide. It was based on its oxidation with ferricyanide in alkaline medium; significant improvements in the analytical signal were achieved by using high temperatures and quinine as sensitiser. Its high throughput (144 h⁻¹), together with its low limit of detection (2 ng mL⁻¹), achieved without need of preconcentration steps, permitted the reliable quantification of diquat over the linear range of (0.01–0.6) μg mL⁻¹ in samples from different origins (river, tap, mineral and ground waters), even in the presence of a 40-fold concentration of paraquat, a pesticide commonly present in the commercial formulations of diquat. Figure Quartz luminometer cell     

A simple algorithm for the calculation of the π ionization energies of substituted benzenes

A simple algorithm, based on HMO approach is used for calculating Π-ionization potentials (Π-IP's) of polysubstituted benzenes. The parameters required for the method are determined from Π-IP's of monosubstituted benzenes. For 50 disubstituted benzenes the first three values of the Π-IPś are obtained with root mean square (rms) error of 0.19 eV. Some examples of application are presented, illustrating the possibility of fast and quite accurate estimation of Π-IP's for polysubstituted benzenes.     

Electrospray ionization–tandem mass spectrometric study of fused nitrogen-containing ring systems

Four fused nitrogen-containing ring systems were investigated by electrospray ionization–tandem mass spectrometry: Pyridazino-indoles, pyridazino-quinolines, a pyrimido-quinoline derivative and pyrimido-cinnolines. Fragmentation patterns of these compounds are discussed and compared. Several characteristic cross-ring fragments were formed mainly on the pyridazine and pyrimidine rings of the ring systems. The connected Cl, NO₂, Me, Ph and more extended heterocyclic substituents influenced the fragmentation.     

Facile synthesis and altered ionization efficiency of diverse Nε-alkyllysine-containing peptides

Protein lysine methylation is a biologically-important posttranslational modification. Given the increased use of alkyllysine-containing peptides to study protein methylation, we describe an efficient solid-phase synthesis to access various alkyllysine-containing peptides. As an exemplary application, we evaluated how ionization efficiency of the alkyllysine peptides affects mass spectrometric analysis.     

Chemiluminescence flow Sensor for determination of the Ammonium ion

Anunoniaisasignificantalkalinepollutantintheatmosphere.AInInoniaeInittedintothetroposphereisreadilytraPpedbyacidicclouddropletSanditneutralizestheacidityofthedropletStoformammoniumsaltS.Therefore,thedetendnationoftheanunoniumioninwetdepositionisveryimportantinatmosphericchemistry,andthereisaneedforasimPleandrapidmethodforthedetendnationofNfu .Variousdetectionmethodsandtechniquesareusedfordetendninganunoniaorammoniumion,suchasionchromatography',ion-selectiveeIectrode',BLMselectrochendcalse…     

Determination of chlorogenic acid by flow injection irreversible biamperometry

A flow injection irreversible biamperometric method for the determination of chlorogenic acid is described.The proposedmethod is based on the electrochemical oxidation of chlorogenic acid at pretreated platinum electrode and the reduction ofpermanganate at another electrode to form an irreversible biamperometric detection system.Under the external potential difference(△E)of 0 V,in the 0.05 mol/L sulfuric acid,chlorogenic acid can be determined over the range 0.8-120 mg/L with a samplemeasurement frequency of 80 samples/h.The detection limit is 0.18 mg/L.The proposed method exhibits the satisfactoryreproducibility with a relative standard derivation(R.S.D.)of 2.21%for 19 successive determinations of 40 mg/L.     

Online phototransformation–flow injection chemiluminescence determination of triclosan

A highly selective and sensitive chemiluminescence method for the determination of triclosan is proposed. The method is based on the phototransformation of triclosan to a light-emitting precursor in the presence of fluorescein in alkaline medium and the chemiluminescence reaction is then triggered by strong base or oxidants such as N-bromosuccinimide. Based on this reaction an online phototransformation–flow injection manifold was developed, in which the photoreactor comprises a 150-cm-long × 0.8-mm-i.d. piece of PTFE tubing coiled around a 25-W fluorescent lamp, and the phototransformed products were then injected into a carrier stream of borate buffer. After mixing with the oxidant stream the produced light was detected by a photomultiplier. A wide calibration range from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁴ mol L⁻¹ was obtained under the optimized conditions, and the detection limit was as low as 5.0 × 10⁻⁸ mol L⁻¹. The whole process of analysis, including the online phototransformation and subsequent chemiluminescence detection, could be completed in 6 min. Most of the foreign substances tested showed high tolerance levels, and the proposed method was directly applied to the determination of triclosan in toothpaste samples without any pre-separation procedure. Figure Schematic representation of the phototransformation of triclosan and subsequent chemiluminescence reaction     

Double-diffusive Cattaneo–Christov squeezing flow of micropolar fluid

Journal of Thermal Analysis and Calorimetry - An incompressible magnetized flow of micropolar fluid is confined between two disks. The lower disk is stationary, while the upper disk moves in upward...     

Sedimentation field flow fractionation and flow field flow fractionation as tools for studying the aging effects of WO₃ colloids for photoelectrochemical uses

WO₃ colloidal suspensions obtained through a simple sol–gel procedure were subjected to a controlled temperature aging process whose time evolution in terms of particle mass and size distribution was followed by sedimentation field flow fractionation (SdFFF) and flow field flow fractionation (FlFFF). The experiments performed at a temperature of 60 °C showed that in a few hours the initially transparent sol of WO₃ particles, whose size was less than 25 nm, undergoes a progressive size increase allowing nanoparticles to reach a maximum equivalent spherical size of about 130 nm after 5 h. The observed shift in particle size distribution maxima (SdFFF), the broadening of the curves (FlFFF) and the SEM–TEM observations suggest a mixed mechanism of growth-aggregation of initial nanocrystals to form larger particles. The photoelectrochemical properties of thin WO₃ films obtained from the aged suspensions at regular intervals, were tested in a biased photoelectrocatalytic cell with 1 M H₂SO₄ under solar simulated irradiation. The current–voltage polarization curves recorded in the potential range 0–1.8 V (vs. SCE) showed a diminution of the maximum photocurrent from 3.7 mA cm⁻² to 2.8 mA cm⁻² with aging times of 1 h and 5 h, respectively. This loss of performance was mainly attributed to the reduction of the electroactive surface area of the sintered particles as suggested by the satisfactory linear correlation between the integrated photocurrent and the cyclic voltammetry cathodic wave area of the W(VI) → W(V) process measured in the dark.     

The thermodynamics of ionization of α-alanine in methanol + water mixtures and the determination of single ion thermodynamics

In order to understand the effect of solvents on the thermodynamic parameters of amino acids, the thermodynamic dissociation constants, k₁ and K₂, for the reactions

and

(where RH^± = α-alanine) have been determined pH-metrically in methanol + water mixtures. The measurements were carried out in dilute solutions and in the absence of neutral electrolytes to minimize the “salt effect” as far as practicable so that the “medium effects” on the dissociation constants of the α-alanine can be properly understood.The enthalpy values for reactions (1) and (2) (up to 44.14 wt% of methanol) have been determined calorimetrically. It has been observed that the conversion of α-alanine into cations and anions is favourable both from enthalpic and entropic considerations, so that the reverse reactions of (1) and (2) are spontaneous. Attempts have been made to interpret the thermodynamics properties of α-alanine in terms of hydrophilic and hydrophobic interactions and other structural changes of the solvent molecules.In order to get a better insight into the nature of specific solute-solvent interactions, we have analysed the results in terms of single ion values using the thermodynamic values from the present work and other relevant data from previous work in our laboratory.