Fourfold tetraurea calix[4]arenes--potential cores for the formation of self-assembled dendrimers

Wide rim tetraurea calix[4]arenes monofunctionalized at the narrow rim by COOH or NH2 have been synthesized in five steps from t-butylcalix[4]arene tripropylether. Their covalent linkage via the narrow rim to a central calix[4]arene fixed in the 1,3-alternate conformation led to pentacalix[4]arenes 9 bearing four tetraurea derivatives in the cone conformation in a flexible tetrahedral arrangement. Their self-assembly via the formation of hydrogen bonded dimeric capsules has been studied under different conditions. A fourfold heterodimerisation of tetrakis-tetraurea derivatives of type 9 with tetratosylurea 10 has been confirmed by 1H NMR-spectroscopy and dynamic light scattering.     

Guest exchange in dimeric capsules of a tetraurea calix[4]arene in the solid state

A solid powder of hydrogen bonded dimers of a tetraurea calix[4]arene is able to exchange the encapsulated guest in contact with the vapor of a second guest. The molecules of a guest-free powder obtained from a polar solvent cannot rearrange in the solid phase to form new guest-filled capsules under these conditions.     

Self-sorting dimerization of tetraurea calix[4]arenes

Calix[4]arenes substituted by four urea functions are self-complementary molecules that spontaneously combine in apolar solvents in the presence of an ammonium salt to form dimeric capsules held together by a belt of hydrogen bonds. In the presence of tetraethylammonium salts, the Et4N+ cation is included as a guest. The sorting between dimeric capsules formed in a mixture of calix[4]arenes directly depends on the steric crowding of the substituents grafted on the urea groups whether aromatic derivatives or aliphatic chains linking urea functions in mono-, di-, or tetraloop structures. Simple rules allow one to anticipate which capsules will be exclusively formed when calix[4]arenes are mixed in different proportions. The stabilization of the dimeric structures by hydrogen bonds is thwarted by the overlaps of aliphatic loops and/or by bulky groups that cannot pass through these loops. Despite the structural similarity of the calixarenes, the exclusive formation of dimers of well-defined compositions and clear titration breaks are observed by electrospray mass spectrometry. This technique yields reliable information on stoichiometries and composition despite measurements in the gas phase rather than in solution and it does not suffer from excessive peak overlaps in contrast with NMR.     

Enhanced thermodynamic and kinetic stability of calix[4]arene dimers locked in the cone conformation

Wide rim tetraurea derivatives (2a,b) have been prepared from a calix[4]arene rigidified in the cone conformation by two diethyleneglycol ether bridges between adjacent oxygens. In comparison to the analogous tetraurea derivatives (3a,b) of a tetrapentoxy calix[4]arene, 2a,b show an increased thermodynamic stability in mixtures of CDCl(3) and DMSO-d(6). Their kinetic stability as expressed by the rate of guest exchange (benzene or cyclohexane against the solvent benzene-d(6)) is also strongly increased by factors of 30-38. Noticeable differences for the inclusion of selected guests are found.     

Topologically novel multiple rotaxanes and catenanes based on tetraurea calix[4]arenes

Calix[4]arenes bearing at their wide rim four urea residues easily form hydrogen bonded dimeric capsules. This has been used to preorganise alkenyl functions attached to these urea groups for their controlled connection via metathesis reaction. Multimacrocyclic tetraurea derivatives are thus obtained in excellent yields via heterodimers which are formed exclusively with tetratosylurea derivatives. Heterodimerisation of such bis- and tetraloop tetraureas leads analogously to multicatenanes, or to rotaxanes by stoppering. Huge macrocycles are detached from tetraloop derivatives by cleavage of the urea function.     

Compensation of steric demand by cation-pi interactions,cobaltocenium cations as guests in tetraurea calix[4]arene dimers

The affinities of ferrocene (2) and the cobaltocenium cation (3+), which have roughly the same size and differ in their charge, towards the inner cavity of the dimeric capsule formed by tetraurea calix[4]arene (1) were studied in C2D4Cl2 solutions. While 3+, which occupies more than 75% of the internal volume of the dimer, is readily encapsulated this is not the case for 2. This is probably due to cation-pi interactions, which operate only between 3+ and the aromatic rings of the calix[4]arene dimer. We found that the affinity of the cobaltocenium cation is higher than that of the tropylium cation (4+) and is only 2-3 times less than that of the tetraethylammoniun cation (5+). From the variable temperature 1H NMR spectra of this capsule, the free energy of activation at 298 K (deltaGdouble dagger(298K)) for the reorientation of the hydrogen bonded belt between the two parts of the dimer could be determined by total line shape analysis for the aromatic protons of the calixarene. The value of 14.3 +/- 0.2 kcal mol(-1) for the dimeric capsules of 3+ PF6- is very similar to the free activation energy found for dimeric capsules of 1 with 4+ PF6- and 5+ PF6- in C2D4Cl2. It becomes significantly lower, if PF6- is replaced by BF4-. We also found that ten times more DMSO is needed to disrupt the capsule 1 x 3+ x 1 than the corresponding 1 x 1 dimer containing benzene as guest. This demonstrates again the importance of the cation-pi interactions for the stability of such hydrogen-bonded dimeric capsules.     

Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.     

Potassium selective calix[4]semitubes

A new class of ionophore consisting of two calix[4]arene units linked through the lower rim by two ethylene chains, in combination with propyl ether and phenolic functional groups, has been developed. These calix[4]semitube molecules exhibit remarkable selectivity and fast complexation kinetics for potassium over all Group 1 metal cations. Molecular modelling studies, using structural models derived from crystallographic data, suggest the potassium cation is complexed by a horizontal, side-on route and not through the calix[4]arene annulus. The length of the bridging alkylene chain between the respective calix[4]arenes of the semitube structure dictates the strength and selectivity of alkali metal cation binding.     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Sterically and guest-controlled self-assembly of calix[4]arene derivatives

In solvents such as chloroform or benzene, tetraurea calix[4]arenes 1 form dimeric capsules in which one solvent molecule is usually included as guest. To explore the structural requirements for the formation of such hydrogen-bonded dimers we replaced one p-tolylurea residue by a simple acetamide function. The resulting calix[4]arene 2 a, substituted at its wide rim with one acetamide and three p-tolylurea functions, assumes a C(1)-symmetrical conformation in apolar solvents as shown by (1)H NMR, which is not compatible with the usual capsule. In the crystalline state, four molecules of 2 a, adopting a pinched cone conformation, assemble into a quasi S(4)-symmetrical tetramer stabilized by a cyclic array of 24 NH.O==C hydrogen bonds and four NH.pi interactions. Four acetamide groups are hydrogen-bonded to each other and pack tightly in the center of the assembly. All polar residues are buried inside the tetramer, the surface of which is lipophilic. Extensive NMR studies revealed similar structures in apolar solvents such as [D]chloroform or [D(6)]benzene for calixacetamides 2 a-c. The formation of these tetramers in solution is critically dependent on the size of the amide fragment, so that propionamide 2 d, butyramide 2 e, and p-tolylamide 2 f form only ill-defined aggregates. This is caused by steric crowding inside the tetrameric assembly. The tetramers persist during molecular dynamics simulations, and the optimized average structure of the MD run is similar to that found in the crystalline state. Theoretical studies revealed that cooperation of hydrogen bonds with multiple NH.pi, C--H.pi, and pi.pi attractions make the tetramer more stable than the capsular dimer with the solvent as guest. In the presence of tetraethylammonium salts, however, compounds 2 a-e form dimeric capsular assemblies, each incorporating a single ammonium cation. Only one of two possible regioisomeric dimers is formed, in which both acetamide groups are surrounded by two urea residues. These examples give striking evidence of how self-assembly in solution can be strongly dependent on subtle structural factors and of how the formation of dimeric capsules can be induced by the presence of an appropriate guest.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Self-assembled calix[4]arenequinhydrone on the platinum electrode by cathodic reduction of calix[4]arenediquinone

The electrochemical reduction of di(methoxy-p-tert-butyl)calix[4]arenediquinone led to its calix[4]arenedihydroquinone. The presence of both in the solution refers to the generation of calix[4]arenequinhydrone charge-transfer complex at the electrode surface through a donor/acceptor process type. Self-assembled adlayers of calix[4]arenequinhydrone was obtained by partial electrochemical reduction. Electrochemical deposition of the last form was achieved on the platinum disk electrode at ?1.16?V versus SCE (saturated calomel electrode) in aprotic solution by cathodic reduction of the starting substrate. The deposit was first characterized by cyclic voltammetry (CV) in electrolytic solution and then in electrolyte support solution and finally in a ferricyannure solution. The self-assembled product was characterized by MALDI-TOF Mass and IR spectroscopy techniques. It was observed too by SEM technique. Calix[4]arenequinhydrone is observed on the electrode surface as hexangular prisms with a length of few micrometers.     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

Nanoencapsulation of calix[4]arene inclusion complexes

A hexameric resorcinarene nanocapsule in wet CDCl3 forms inclusion complexes of calix[4]arene with tetramethylammonium and trimethylsulfoxonium cations to give highly stable Russian-doll-type multicomponent assemblies. The 2D NOESY experiments revealed the size of the assembly, the close proximity of the encapsulated calix[4]arene molecule to the resorcinarene molecules of the capsule, and the inclusion of the tetramethylammonium cation in the calix[4]arene cavity.     

Thermodynamic parameters of sublimation of calix[4]arenes

The temperature dependences of the vapor pressure of calix[4]arenes were determined by the Knudsen effusion method. Some calix[4]arenes can form congruently subliming intramolecular compounds with a solvent. The thermodynamic parameters of the sublimation of the compounds were calculated. Molecules of organic solvents incorporated in the cavity of calix[4]arenes stabilize the crystal lattice, increasing the enthalpy of sublimation. The electrostatic interactions presumably make a significant contribution to stabilization of the crystal lattice of stoichiometric complexes of calix[4]arenes with solvents.     

Analytical applications of nano-baskets of calix[4]pyrroles

Calix[4]pyrrole is one such class which holds a great promise in the fields of sensors and their unique behavior as sensors owes to its structural flexibility. Anion binding ability of calix[4]pyrrole has been modified in a variety of ways. Introduction of electron releasing and electron withdrawing groups at the meso position or at β-pyrrolic positions leads to calix[4]pyrrole with deep cavities and fixed walls which shows increased selectivity and modified binding effects. Strapping of calix[4]pyrrole is another way to modify its structural behavior which is responsible for its binding behavior. Choice of strap could play a profound role not only in increasing the intrinsic anion binding affinity of calix[4] pyrrole, but also in modulating the receptor anion stoichiometry, thereby modifying potentially the inherent anion binding selectivity. Calix[n]pyrroles with extended cavities have also been synthesized. Such as calix[3]bipyrrole binds bromide substantially with high affinity than calix[4]pyrrole. Calix[4]pyrrole has also been used to produce anion sensors that can report the presence of anion by means of a color change. The medium effect on the complexation of calix[4]pyrrole and anion has been investigated in various solvents. Calix[4]pyrrole has also been used to increase the ionic conductivity of solid polymer electrolyte by anion complexation of the metal salt. Calix[4]pyrrole has been used to obtain optical sensors using surface plasmon resonance technique. Composite films of cellulose acetate containing calix[4]pyrrole has also been reported which has potential usage in packaging, storage and preservation. In nut shell, calix[4]pyrrole can be modified in a variety of ways to form versatile sensors which can be used in variety of ways in various areas.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Tetraurea calix[4]arenes with sulfur functions: synthesis, dimerization to capsules, and self-assembly on gold

Various calix[4]arene derivatives, fixed in the cone conformation by decylether groups and functionalized at their wide rim by urea residues, were synthesized. In two compounds (,) sulfur functions were attached to the urea groups via different spacers in order to allow binding to metal surfaces. While they exist as single molecules in polar solvents, tetraurea calix[4]arenes of this type () combine to form dimeric capsules in aprotic, apolar solvents. A solvent molecule is usually included in such a capsule, if no guest with a higher affinity is present. In the presence of an equimolar amount of the tetratosylurea, the exclusive formation of heterodimers, consisting of one molecule of and, is observed. The homo- and heterodimerization of the newly prepared derivatives, were studied by 1H NMR to establish the conditions under which they exhibit the desired dimerization behaviour. Self-assembled monolayers (SAMs) were formed using the single calix[4]arenes, and the heterodimeric capsules. Chloroform, dichloromethane and ferrocenium cations were used as guests in these immobilized heterodimeric capsules. The particular supramolecular architecture of the heterodimers should ensure that, after the immobilization on the metal surface, decomposition of the capsules and release or exchange of the guest is impossible or at least hindered. The self-assembly process and the stability of SAMs formed by capsules filled with ferrocenium cations in electrolyte solutions were tested with surface plasmon spectroscopy. The inclusion of guests, such as dichloromethane or ferrocenium, in the immobilized capsules were confirmed by classical surface plasmon spectroscopy, by gold nanoparticle absorption spectroscopy and by time-of flight secondary ion mass spectrometry (ToF-SIMS). The film stability and quality was tested by cyclic voltammetry.     

Novel acetal-containing calix[4]resorcinolarene-based Mannich bases

The reaction of calix[4]resorcinolarene with methylaminoacetaldehyde dimethyl acetal and formalin gave novel acetal-containing calix[4]resorcinolarene derivatives aminomethylated at the upper rim.