配体交换法制备水中高分散稳定性的多羧基修饰Fe3O4纳米颗粒

采用油相高温分解法制备了粒径可控且单分散的油溶性Fe3O4磁性纳米粒子(MNPs-OA), 并通过配体交换对其表面进行了亲水性修饰, 制备了柠檬酸(CA)、 N-(三甲氧基硅丙基)乙二胺三乙酸钠(SiCOOH)、 丁烷四羧酸(BTCA)和乙二胺四乙酸 (EDTA)四钠4种多羧基配体修饰的水溶性Fe3O4磁性纳米粒子(MNPs-CA, MNPs-SiCOOH, MNPs-BTCA 和MNPs-EDTA), 其中首次选用四羧基配体BTCA和EDTA四钠来修饰Fe3O4磁性纳米粒子(MNPs). 对油溶性MNPs和4种水溶性MNPs的形貌、 结构、 化学组成和磁性能进行了表征, 并对4种多羧基配体修饰的水溶性MNPs在水相中的稳定性和分散性进行了表征. 结果表明, 所得MNPs的平均粒径为15 nm, 具有超顺磁性, 配体交换后的水溶性MNPs具有良好的亲水性, 并在弱酸～碱性很宽的pH范围内具备良好的分散稳定性. 此类多羧基修饰的水溶性MNPs可与适当的阳离子聚电解质进行组装, 从而得到在磁靶向载体和磁共振造影(MRI)显影中具有良好应用前景的磁性自组装微囊.     

Ionic liquids as recycling solvents for the synthesis of magnetic nanoparticles

This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 °C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.     

Fe3O4-LiMo3Se3 nanoparticle clusters as superparamagnetic nanocompasses

A scaleable chemical approach to functional nanoscale analogues of the magnetic compasses in magnetotactic bacteria is described. LiMo(3)Se(3)-Fe(3)O(4) nanowire-nanoparticle composites were synthesized by a reaction of 3-iodopropionic acid treated LiMo(3)Se(3) nanowire bundles with oleic acid-stabilized Fe(3)O(4) nanoparticles of 2.8, 5.3, and 12.5 nm size in tetrahydrofuran. Transmission electron micrographs show that the composite consists of Fe(3)O(4) nanoparticles attached to the surfaces of the 4-6 nm thick nanowire bundles. UV/vis spectra reveal absorptions from the nanowire (506 nm) and magnetite components (280-450 nm), and IR spectra show characteristic bands for the propionic acid linkers and for the residual oleic acid ligands on the magnetite particles. In the presence of excess oleic acid, the nanocomposites undergo rapid disassembly, suggesting that Fe(3)O(4) nanoparticles are bonded to nanowires via carboxylate groups from the linkers. Ultrasonication of a dispersion of the composite in THF produces individual LiMo(3)Se(3)-Fe(3)O(4) clusters, which are 340 +/- 107 nm long and 20 +/- 5 nm thick, depending on the sonication time and Fe(3)O(4) nanoparticle size. Field cooled and zero-field cooled magnetization measurements reveal that the blocking temperature (T(B) = 100 K) of the clusters with 5.3 nm Fe(3)O(4) is increased as compared to the free nanoparticles (T(B) = 30 K). Directional dipolar interactions in the clusters lead to magnetic anisotropy, which makes it possible to align the clusters in a magnetic field (900 Oe).     

新型磁性Fe3O4/EDTA复合纳米粒子的制备及性能研究

采用氨羧络合剂EDTA对纳米磁性Fe3O4粒子进行表面改性,制备出能够螯合金属离子和放射性核素离子的磁性Fe3O4/EDTA复合纳米粒子.用X射线衍射、红外光谱、透射电子显微镜、光电子能谱、振动样品磁强计和原子吸收光谱对复合粒子进行了表观形貌、结构、磁学及螯合性能表征.结果表明,纳米磁性Fe3O4和EDTA之间能够有效地以化学键合方式进行复合.改性后,Fe3O4/EDTA纳米复合粒子可以对包括放射性金属离子在内的多种金属离子具有良好的络合效果.     

PREPARATION AND CHARACTERIZATION OF DOXORUBICIN-LOADED MAGNETIC ANTICANCER NANOPARTICLES

Doxorubicin（ADM）-loaded magnetic anticancer nanoparticles, using Fe3O4 as core, doxorubicin as model drug and polyvinylpyrrolidone （PVP） as matrix, were prepared by inverse emulsion polymerization. The experimental results showed that the average diameter of Fe3O4 particles was 19.8nm. The X-ray diffraction itzdicated that the prepared Fe3O4 particle was pure cubic Fe3O4, The results obtained by SEM showed the magnetic nanoparticles under optimal operating condition had a smooth spherical surface, LLS showed an average size of 78. 7nm. And IR results demonstrated that they consisted of ADM, PVP and Fe3O4.     

Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子的制备与性能

采用水热法合成了Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子,对其结构和性能进行了表征。XRD分析表明:Fe3O4表面包覆上了结晶良好的正交晶系的YF3。TEM照片表明:复合粒子为球形,构成核的Fe3O4颗粒的尺寸在200～350 nm之间,Fe3O4@SiO2@YF3∶Eu3+核壳结构复合粒子的尺寸约为230～380 nm,与包覆前的Fe3O4相比较,包覆后,颗粒尺寸增大,并且YF3∶Eu3+是以棒状结构连接在Fe3O4球型颗粒的表面。磁性和荧光光谱分析表明:该复合颗粒同时具有良好的发光性和磁性,使其在生物医学领域具有潜在的应用。     

Miniemulsion synthesis of metal-oxo cluster containing copolymer nanobeads

Hybrid nanobeads containing either a manganese-oxo or manganese-iron-oxo cluster have been prepared via the miniemulsion polymerization technique. Two new ligand substituted oxo clusters, Mn(12)O(12)(VBA)(16)(H(2)O)(4) and Mn(8)Fe(4)O(12)(VBA)(16)(H(2)O)(4) (where VBA = 4-vinylbenzoate), have been prepared and characterized. Polymerization of the functionalized metal-oxo clusters with styrene under miniemulsion conditions produced monodispersed polymer nanoparticles as small as ~60 nm in diameter. The metal-oxo polymer nanobeads were fully characterized in terms of synthetic parameters, composition, structure, and magnetic properties.     

Controlling the size of magnetic nanoparticles using pluronic block copolymer surfactants

We have successfully controlled the size of magnetic nanoparticles by adjusting the surfactant/solvent ratio. Gamma-Fe(2)O(3) nanoparticles of 5.6 and 12.7, and Fe(0) nanoparticles of 22.3 nm in diameter were prepared, all having spherical shape and uniform size as confirmed by TEM. M?ssbauer spectra confirmed Fe(3+) for the 5.6 and 12.7 nm particles and Fe(3+) and Fe(0) for 22.3 nm particles, in good agreement with synchrotron XRD patterns. Both room temperature and 5 K H-M measurements show that 22.3 nm particles have much higher magnetization than their oxide counterparts, in agreement with their being Fe(0). T-M measurements show superparamagnetism for 5.6 and 12.7 nm particles and ferromagnetism for 22.3 nm particles.     

Magnetic nanosensor particles in luminescence upconversion capability

Nanoparticles (NPs) exhibit interesting size-dependent electrical, optical, magnetic, and chemical properties that cannot be observed in their bulk counterparts. The synthesis of NPs (i.e., crystalline particles ranging in size from 1 to 100 nm) has been intensely studied in the past decades. Magnetic nanoparticles (MNPs) form a particularly attractive class of NPs and have found numerous applications such as in magnetic resonance imaging to visualize cancer, cardiovascular, neurological and other diseases. Other uses include drug targeting, tissue imaging, magnetic immobilization, hyperthermia, and magnetic resonance imaging. MNPs, due to their magnetic properties, can be easily separated from (often complex) matrices and manipulated by applying external magnetic field. Near-infrared to visible upconversion luminescent nanoparticles (UCLNPs) form another type of unusual nanoparticles. They are capable of emitting visible light upon NIR light excitation. Lanthanide-doped (Yb, Er) hexagonal NaYF? UCLNPs are the most efficient upconversion phosphors known up to now. The use of UCLNPs for in vitro imaging of cancer cells and in vivo imaging in tissues has been demonstrated. UCLNPs show great potential as a new class of luminophores for biological, biomedical, and sensor applications. We are reporting here on our first results on the combination of MNP and UCLNP technology within an ongoing project supported by the DFG and the FWF (Austria).     

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.     

影响Fe3O4超微粒子性能因素的研究

超微Fe_3O_4粒子正在广泛地应用到磁流体和催化等领域。化学共沉淀法制备Fe_3O_4是将碱液滴入一定温度的Fe~(2+)、Fe~(3+)混合液中。反应式为Fe~(2+)+2Fe~(3+)+8OH~-=Fe_3O_4+4H_2O。本文研究了Fe_3O_4超微粒子的磁性、粒度与工艺条件的关系。 1 实验 配制一定浓度的FeCl_2和FeCl_3溶液,按一定比例混合并置于三颈瓶中恒温。搅拌后,缓     

Molecular [(fe(3))-(fe(3))] and [(fe(4))-(fe(4))] coordination cluster pairs as single or composite arrays

The synthesis of molecular cluster pairs is a challenge for coordination chemists due to the potential applications of these species in molecular spintronics or quantum computing. The ligand H(4)L, 1,3-bis-(3-oxo-3-(2-hydroxyphenyl)-propionyl)-2-methoxybenzene, has been successfully used to obtain a series of such complexes using the basic Fe(III) trinuclear carboxylates as starting materials. Synthetic control has allowed the isolation of the two molecular cluster pairs that form the composite [Fe(4)O(2)(PhCO(2))(6)(H(2)L)(pz)](2)[Fe(3)O(PhCO(2))(5)(py)(H(2)L)](2) (1). The dimers of trinuclear units, [Fe(3)O(PhCO(2))(5)(H(2)O)(H(2)L)](2) (2) and [Fe(3)O(o-MePhCO(2))(5)(H(2)L)(py)](2) (3), and the dimers of tetranuclear units, [Fe(4)O(2)(PhCO(2))(6)(H(2)L)(pz)](2) (4) and [Fe(4)O(2)(o-MePhCO(2))(6)(H(2)L)(pz)](2) (5), are presented here. The magnetic properties of the reported aggregates show that they are pairs of semi-independent clusters weakly interacting magnetically as required for two-qubit quantum gates.     

Fe3O4和Zn2+掺杂型Zn1-xFe2+xO4纳米晶的溶剂热合成和电磁性能

利用溶剂热法, 在醋酸钠静电保护剂的辅助下, 成功制备出Fe₃O₄和Zn²⁺掺杂型Zn_0.07Fe_2.93O₄纳米晶. 利用X射线衍射仪和扫描电子显微镜等对样品的晶体结构、粒径、形貌和化学组成进行了分析. 结果表明, 所得纳米晶的粒径均匀, 形貌为球形, 分散度好; Zn_0.07Fe_2.93O₄纳米晶的平均粒径(70 nm)明显小于Fe₃O₄(170 nm). 磁性能测量结果表明, 室温下Zn_0.07Fe_2.93O₄的饱和磁化强度(54.2 A·m²·kg^-1)小于Fe₃O₄ (81.6 A·m²·kg^-1). 利用矢量网络分析仪对样品的电磁性能和吸波性能进行了研究. 结果表明, Zn²⁺掺杂型Zn_0.07Fe_2.93O₄纳米晶的吸波性能优于Fe₃O₄, 前者的最大吸收峰(-19.3 dB)大于后者(-9.8 dB), 且吸收峰低于-10 dB的峰宽达2.5 GHz.     

内部结构不对称磁性复合微球的制备及其影响因素探究

内部结构不对称复合微球是指无机粒子在复合微球内部呈现规律性、不对称分布的一类微球.采用细乳液聚合的方法一步合成了平均粒径0.8μm、磁含量为46.67%、比饱和磁化强度为23.20 emu/g的内部结构不对称PSt/Fe3O4磁性复合微球.详细考察了Fe3O4纳米粒子表面修饰剂含量、乳化剂、助乳化剂、超分散剂、细乳化时间等因素对于复合微球形貌的影响,探讨了内部结构不对称复合微球的形成机理.同时通过TEM(透射电子显微镜),FTIR(红外光谱),VSM(振动样品磁强计),TG(热失重分析)以及激光粒度仪等表征手段对微球内部形貌、磁化强度及粒径等进行了表征,确定Fe3O4纳米粒子表面性质是微球呈现内部结构不对称的决定性因素.     

壳核型磁性纳米纤维素微球的超声制备及表征

A kind of cellulose magnetic nanoparticle with a core / shell structure has been prepared by ultrasonic irradiation. Cellulose acts as the shell while Fe3O4 magnetic nanoparticles take the role as the core. Magnetic force microscopy（MFM）with atomic force microscopy（AFM）measurement showed that the size of the magnetic nanoparticles is about 30-50 nm in diameter,while the Fe3O4 core is about 20-30 nm. FT-IR,XRD and MFM was used to provide the chemical and magnetic information of the nanoparticles. The MFM image showed that the nanoparticles separate very well with each other,indicating the cellulose shell produces a good prevention from the aggregation of the Fe3O4 particles. MFM studies also showed two magnetic nanoparticles can form particle-pairs,indicating a weak magneto-dipole interaction between magnetic nanoparticles. It is also found that the average sizes of magnetic nanoparticles have relation to the power of ultrasonic irradiation,and the possible mechanism is discussed.     

Fabrication of nanoporous nanocomposites entrapping Fe3O4 magnetic nanoparticles and oxidases for colorimetric biosensing

A nanostructured multicatalyst system consisting of Fe(3)O(4) magnetic nanoparticles (MNPs) as peroxidase mimetics and an oxidative enzyme entrapped in large-pore-sized mesoporous silica has been developed for convenient colorimetric detection of biologically important target molecules. The construction of the nanocomposites begins with the incorporation of MNPs on the walls of mesocellular silica pores by impregnating Fe(NO(3))(3)·9H(2)O, followed by the immobilization of oxidative enzymes. Glutaraldehyde crosslinking was employed to prevent enzymes leaching from the pores and led to over 20 wt% loading of the enzyme. The oxidase in the nanocomposite generates H(2)O(2) through its catalytic action for target molecules and subsequently activates MNPs to convert selected substrates into colored products. Using this strategy, two different biosensing systems were constructed employing glucose oxidase and cholesterol oxidase and their analytical capabilities were successfully verified by colorimetrically detecting the corresponding target molecules with excellent selectivity, sensitivity, reusability, and stability. Future potential applications of this technology range from biosensors to multicatalyst reactors.     

Magnetic beads-based electrochemiluminescence immunosensor for determination of cancer markers using quantum dot functionalized PtRu alloys as labels

A novel electrochemiluminescence (ECL) immunosensor for sensitive detection of human chorionic gonadotrophin antigen (HCG-Ag) was constructed using CdTe quantum dot functionalized nanoporous PtRu alloys (QDs@PtRu) as labels for signal amplification. In this paper, nanoporous PtRu alloy was employed as the carrier for immobilization of CdTe QDs and antibodies. Primary monoclonal antibody to alfa-HCG antigen (McAb(1)) was immobilized onto the surface of chitosan coated Fe(3)O(4) magnetic nanoparticles (Fe(3)O(4)/CS MNPs) by glutaraldehyde (GA) as coupling agent. Then McAb(1) could be easily separated and assembled on the surface of indium tin oxide glass (ITO) owing to their excellent magnetic properties with external magnetic forces holding the MNPs. Due to signal amplification from the high loading of CdTe QDs, 4.67-fold enhancements in ECL signal for HCG-Ag detection was achieved compared to the unamplified method (single QDs as labels). Under optimal conditions, a wide detection range (0.005~50 ng mL(-1)) and low detection limit (0.8 pg mL(-1)) were achieved through the sandwich-type immunosensor. The novel immunosensor showed high sensitivity and selectivity, excellent stability, and good reproducibility, and thus has great potential for clinical detection of HCG-Ag. In particular, this approach presents a novel class of combining bifunctional nanomaterials with preferable ECL properties and excellent magnetism, which suggests considerable potential in a wide range of applications for bioassays.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

Ultrafast hydrothermal synthesis of high quality magnetic core phenol-formaldehyde shell composite microspheres using the microwave method

An ultrafast, facile, and efficient microwave hydrothermal approach was designed to fabricate magnetic Fe(3)O(4)/phenol-formaldehyde (PF) core-shell microspheres for the first time. The structure of the Fe(3)O(4)/PF core-shell microspheres could be well controlled by the in situ polycondensation of phenol and formaldehyde with magnetic Fe(3)O(4) clusters as the seeds in an aqueous solution without any surfactants. The effect of synthetic parameters, such as the feeding amounts of phenol, the dosages of formaldehyde, the reaction temperatures, and the microwave heating time, on the morphologies and sizes of the Fe(3)O(4)/PF microspheres were investigated in details. The phenol-formaldehyde shell is found to be evenly coated on Fe(3)O(4) clusters within 10 min of the irradiation. The as-prepared microspheres were highly uniform in morphology, and the method was found to allow the shell thickness to be finely controlled in the range of 10-200 nm. The properties of the composite microspheres were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetic analysis (TGA), Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM). The as-prepared Fe(3)O(4)/PF microspheres were monodisperse and highly dispersible in water, ethanol, N,N-dimethyformamide, and acetone, a beneficial quality for the further functionalization and applications of the Fe(3)O(4)/PF microspheres.     

Polyol合成法制备生物医药用超小粒径Fe3O4磁性纳米晶体

采用一罐polyol合成法还原Fe（Ⅲ）乙酰丙酮化合物制备了粒径可调、单分散、直径5nm以下的磁性Fe3O4纳米晶体．其晶粒表面为所用聚合物表面活性剂PVP所包覆．运用透射电镜／高分辨透射电镜、X射线衍射、振动样品磁强计和超导量子干涉仪对其结构和性能进行了表征．结果表明所制得的Fe3O4磁性纳米晶体在室温下显示出优良的超顺磁性,且结晶度高、分散性好、化学性质稳定同时表面易修饰．磁滞回线的模型分析说明该Fe3O4纳米晶粒是磁性单畴．该法制得的超顺磁Fe3O4纳米晶粒在生物和医学领域具有重要的应用价值．