Mixed azide-terminated monolayers: a platform for modifying electrode surfaces

We have prepared and characterized mixed self-assembled monolayers (SAM) on gold electrodes from azido alkane thiols and various omega-functionalized alkane thiols. In the presence of copper(I) catalysts, these azide-modified surfaces are shown to react rapidly and quantitatively with terminal acetylenes forming 1,2,3-triazoles, via "click" chemistry. The initial azide substituents can be identified and monitored using both grazing-angle infrared (IR) and X-ray photoelectron spectrosopies. Acetylenes possessing redox-active ferrocene substituents react with the azide-terminated mixed SAMs and electrochemical measurements of the ferrocene-modified SAM electrodes have been used to quantify the redox centers attached to these platforms. Time-resolved electrochemical measurements have enabled us to follow the formation of these ferrocene centers and thus to measure the rate of the surface "click" reaction. Under optimal conditions this well-behaved second-order reaction takes place with a rate constant of 1 x 10(3) M(-)(1) s(-)(1). Typical reaction times of several minutes were realized using micromolar concentrations of acetylene. These techniques have been used to construct well-characterized, covalently modified monolayers that can be employed as functional electrode surfaces.     

Rapid preparation of multifunctional surfaces for orthogonal ligation by microcontact chemistry

Microcontact chemistry has been applied to patterned glass and silicon substrates by successive reaction of unprotected and monoprotected heterobifunctional linkers with alkene-terminated self-assembled monolayers (SAMs) to produce bi-, tri-, and tetrafunctional surfaces. Photochemical microcontact printing of an azide thiol linker followed by immobilization of an acid thiol linker on an undecenyl-terminated SAM results in a well-defined, micropatterned surface with terminal azide, acid, and alkene groups. Biologically relevant molecules (biotin, carbohydrates) have been selectively attached to the surface by means of orthogonal ligation chemistry, and the resulting microarrays display selective binding to fluorescently labeled proteins. An orthogonally addressable, tetrafunctional surface (azide, acid, alkene, and amine) can be prepared by an additional printing step of a tert-butyloxycarbonyl (Boc)-protected alkyne amine linker on the azide structures by using the copper(I)-catalyzed azide-alkyne Huisgen cycloaddition and subsequent removal of the protective group.     

基于二元混合自组装包裹纳米颗粒的微传感器抗体固定方法

采用二元混合自组装膜修饰纳米金颗粒,在经自组装单分子层修饰的金电极上阵列式排布,并通过共价键固定抗体形成生物敏感膜.采用原子力显微镜、扫描电镜和阻抗谱分别对电极表面的修饰过程进行了表征.纳米粒子在微电极表面均匀分布,没有明显的团聚,并且可实现抗体有效固定.基于标准互补金属氧化物半导体(Complementary met...     

Orientation modulation of a synthetic polypeptide in self-assembled monolayers: a TOF-SIMS study

Structure and orientation of molecules are key properties of functionalized surfaces. Using time-of-flight secondary ion mass spectrometry (TOF-SIMS), here we investigate how to modulate these parameters upon the immobilization process varying the conditions of self-assembly. The molecule of interest, a template-assembled synthetic protein (TASP), consists of a central peptide ring with orthogonally arranged residues. Thioalkane chains allow the directed self-assembly of the molecule on a gold surface; four serine residues on the opposite side of the ring can be used as anchoring sites for various functional sensing molecules. The TASP conformation and its orientation in self-assembled monolayers (SAMs) play a central role for the accessibility of these serine residues. To study the influence of the self-assembly conditions, two series of samples were prepared. Pure TASP monolayers of different surface densities are compared to mixed TASP/alkanethiol monolayers prepared by sequential adsorption varying sequence and particular incubation times as well as by coadsorption modifying incubation times and TASP/alkanethiol mass ratios. Switching the TASP orientation from a state where the molecules are lying flat on the surface to an upright orientation turned out to be possible by inserting the TASP into a preformed alkanethiol monolayer of an appropriate surface density. This study demonstrates that TOF-SIMS is an excellent tool not only to investigate the surface composition, but also the molecular structure of functionalized surfaces.     

Surface functional group effect on atomic force microscope anodization lithography

The lithographic effect of surface chemical functional groups of organic resists on atomic force microscope (AFM) anodization lithography is investigated using mixed self-assembled monolayers (SAMs). The SAM resist films were prepared with 1,12-diaminododecane dihydrochloride (DAD.2HCl), n-tridecylamine hydrochloride (TDA.HCl), and 1,12-diaminododecane hydrochloride (DAD.HCl), and their film characteristics were evaluated by ellipsometry, zeta-potential measurements, and AFM. The lithographic results indicate that the most dominant factor of the surface functional group effect is the electrochemical property of the surface groups as an anode surface in the anodization reaction, and the dimensions of the protruded patterns are critically determined by the wetting property of the resist surface. By controlling the surface chemical groups with considerations of their effects, high-speed patterning at 2 mm/s was achieved successfully using the mixed SAM resist of DAD.2HCl and TDA.HCl.     

Properties of lipophilic nucleoside monolayers at the air–water interface

The capability of self-assembly and molecular recognition of biomolecules is essential for many nanotechnological applications, as in the use of alkyl-modified nucleosides and oligonucleotides to increase the cellular uptake of DNA and RNA. In this study, we show that a lipophilic nucleoside, which is an isomer mixture of 2′-palmitoyluridin und 3′-palmitoyluridin, forms Langmuir monolayers and Langmuir–Blodgett films as a typical amphiphile, though with a smaller elasticity. The nucleoside may be incorporated into dipalmitoyl phosphatidyl choline (DPPC) monolayers that serve as a simplified cell membrane model. The molecular-level interactions between the nucleoside and DPPC led to a remarkable condensation of the mixed monolayer, which affected both surface pressure and surface potential isotherms. The morphology of the mixed monolayers was dominated by the small domains of the nucleoside. The mixed monolayers could be deposited onto solid substrates as a one-layer Langmuir Blodgett film that displayed UV–vis absorption spectra typical of aggregated nucleosides owing to the interaction between the nucleoside and DPPC. The formation of solid films with DNA building blocks in the polar heads may open the way for devices and sensors be produced to exploit their molecular recognition properties.     

Adsorption of C60 buckminster fullerenes on an 11-amino-1-undecene-covered Si(111) substrate

Buckminster fullerene C60 was used as a model to understand the attachment chemistry of large molecules on amine-terminated self-assembled monolayers (SAM) on semiconductor substrates. This type of interface serves as a prototype for future devices in such fields as solar energy conversion, biosensing, catalysis, and molecular electronics. Fullerene C60 was attached to 11-amino-1-undecene self-assembled monolayers on a Si(111) surface. The chemical state and topography of the C60-modified surface were characterized by surface analytical spectroscopic and microscopic methods and by computational investigation. X-ray photoelectron spectroscopy revealed that the secondary amine group is formed between the C60 and the 11-amino-1-undecene SAM on the surface. The appearance of the pi-pi* C 1s shakeup peak confirmed the presence of C60 on the surface. Infrared spectroscopic studies verified several characteristic features of the C60 skeleton vibration and the 11-amino-1-undecene vibrational signature. The atomic force microscopy investigation suggested that the fullerene molecules produce surface features with an apparent height of approximately 2 nm and an average width of approximately 20 nm. A parallel study was performed on a Au(111) surface for comparison with the results obtained on the silicon substrate. The reaction between fullerene molecules and approximately 1% 11-amino-1-undecene diluted in decene SAM on the Si(111) surface accordingly yielded dilute and uniformly distributed C60 molecules on the surface, which indicated that the amine groups were the reactive sites.     

A nanoengineering approach to regulate the lateral heterogeneity of self-assembled monolayers

Using a scanning probe lithography method known as nanografting in conjunction with knowledge of self-assembly chemistry, regulation of the heterogeneity of self-assembled monolayers (SAMs) is demonstrated. While nanografting in single-component thiols produces areas of SAMs with designed geometry and size, nanofabrication in mixed thiol solution yields segregated domains. The reaction mechanism in nanografting differs significantly from self-assembly in mix-and-grow methods, as proven in systematic studies reported in this article and a companion paper of theoretical calculations of the nanografting process. Knowledge of the reaction pathways enables development of methods for shifting the interplay between the kinetics and thermodynamics in SAM formation, and thus the heterogeneity of mixed SAMs. By varying fabrication parameters, such as shaving speed, and reaction conditions, such as concentration and ratio of the components, the lateral heterogeneity can be adjusted ranging from near molecular mixing to segregated domains of several to tens of nanometers.     

Dithiocarbamates: functional and versatile linkers for the formation of self-assembled monolayers

Self-assembled monolayers have evolved into one of the best established self-assembly systems with high relevance in a scientific and applied context. So far, however, virtually exclusively thiol functional groups have been used for the investigation of fundamental processes on metal surfaces. In this paper, an alternative binding group, the dithiocarbamate (DTC) group, is re-visited. Complete SAM formation with new layer properties characteristically different from thiol SAMs is demonstrated for mono-functional acyclic and bifunctional cyclic dithiocarbamates on Au111 by X-ray photoelectron spectroscopy, cyclic voltammetry, and scanning tunneling microscopy. Furthermore, the chemical adsorption and voltammetric desorption reactions are quantitatively determined. The resonant bi-dentate structure of the DTC provides a characteristically different molecule-metal coupling compared to the thiols and makes the DTC an interesting system for molecular electronics.     

Acid-base properties and zeta potentials of self-assembled monolayers obtained via in situ transformations

Siloxane-anchored, self-assembled monolayers (SAMs) on single crystal Si were prepared with a variety of surface functional groups using a single commercially available surfactant (1-bromo-11-(trichlorosilyl)undecane) followed by in situ transformations. Polar (thioacetate and thiol), nonpolar (methyl), acidic (sulfonic and carboxylic), basic (various amines), and ionic (alkylammonium) surface functionalities were prepared. For primary amine and sulfonate surfaces, the degree of surface charge as a function of pH was determined ex situ using X-ray photoelectron spectroscopy (XPS). Sulfonate SAMs exhibited much higher effective pKa (approximately 2) than dilute sulfonic acid (-5 to -6), and amine SAMs exhibited much lower pKa (approximately 3) than dilute organic amines (approximately 10). This is attributed to the stabilization of nonionized groups by adjacent ionized groups in the SAM. Zeta potentials of these SAMs as a function of pH were consistent with the XPS results and indicated that ionizable SAM surfaces can generate surface potentials much higher than those of nonionic SAMs (thioacetate, methyl) and typical oxide surfaces.     

Chemical force titrations of functionalized Si(111) surfaces

Chemical force titrations-plots of the adhesive force between an atomic force microscope tip and sample as a function of pH-were acquired on alkyl monolayer-derivatized Si(111) surfaces. Gold-coated AFM tips modified with thioalkanoic acid self-assembled monolayers (SAM) were employed. Alkyl monolayer-derivatized Si(111) surfaces terminated with methyl, carboxyl, and amine groups were produced via hydrosilylation reactions between 1-alkene reagents and H-terminated silicon. The functionalized surfaces were characterized using standard surface science techniques (AFM, FTIR, and XPS). Titration of the methyl-terminated surface using the modified (carboxyl-terminated) atomic force microscope tip resulted in a small pH-independent hydrophobic interaction. Titration of the amine-terminated surface using the same tip resulted in the determination of a surface pKa of 5.8 for the amine from the pH value from the maximum in the force titration curve. A pK(1/2) of 4.3 was determined for the carboxyl-terminated Si(111) in a similar way. These results will be discussed in relation to the modified Si(111) surface chemistry and organic layer structure, as well as with respect to existing results on Au surfaces modified with SAMs bearing the same functional groups.     

Protein interactions with model chromatographic stationary phases constructed using self-assembled monolayers

Model surfaces representative of chromatographic stationary phases were developed by immobilising an homologous series (C2-C18) of n-alkylthiols, mixed monolayers of C4/C18 and thioalkanes with alcohol, carboxylic acid, amino and sulphonic acid terminal groups onto a flat, silver-coated glass surface using self-assembled monolayer (SAM) chemistry. The processes of adsorption and desorption of serum albumins onto the monolayer surfaces was monitored in real-time using surface plasmon resonance (SPR). Alkyl-terminated SAMs all showed a strong adsorption of bovine serum albumin which was largely independent of alkyl chain length, the ratio of mixed C4/C18 SAMs or the solution pH/ionic strength. The adsorption of human serum albumin to carboxylic and amine terminated SAMs was shown to be predominantly via non-electrostatic interactions (hydrophobic or hydrogen bonding). However, sulphonic acid terminated SAMs showed almost exclusively electrostatic interactions with human serum albumin. This preliminary work using self-assembled monolayer chemistry confirms the usefulness of well characterised SAMs surfaces for investigating protein adsorption and desorption onto/from model chromatography surfaces and gives some guidance for selecting appropriate functionalities to develop better surfaces for chromatography and electrophoresis.     

Mixed charged zwitterionic self-assembled monolayers as a facile way to stabilize large gold nanoparticles

Here we report a facile way of stabilizing large gold nanoparticles (AuNPs) by mixed charged zwitterionic self-assembled monolayers (SAMs). The citrate-capped AuNPs with diameters ranging from 16 nm to even ～100 nm are well stabilized via a simple place exchange reaction with a 1:1 molar ratio mixture of negatively charged sodium 10-mercaptodecanesulfonic acid (HS-C10-S) and positively charged (10-mercaptodecyl)-trimethyl-ammonium bromide (HS-C10-N4). The 16 nm AuNPs protected by mixed charged zwitterionic SAMs not only show much better stability than the single negatively or positively charged AuNPs, but also exhibit exciting stability as well as those modified by monohydroxy (1-mercaptoundec-11-yl) tetraethylene glycol (HS-C11-EG4). Importantly, 16 nm AuNPs protected by mixed SAMs exhibit good stability in cell culture medium with 10% FBS and strong protein resistance, especially with excellent resistance against plasma adsorption. Moreover, the mixed charged zwitterionic SAMs are also able to well-stabilize larger AuNPs with a diameter of 50 nm, and to help remarkably improve their stability in saline solution compared with HS-C11-EG4 protected ones. When it comes to AuNPs with a diameter of 100 nm, the mixed charged zwitterionic SAM protected nanoparticles retain a smaller hydrodynamic diameter and even better long-term stability than those modified by mercaptopolyethylene glycol (M(w) = 2000, HS-PEG2000). The above results demonstrated that the mixed charged zwitterionic SAMs are able to have a similar effect on stabilizing the large gold nanoparticles just like the single-component zwitterionic SAMs. Concerning its ease of preparation, versatility, and excellent properties, the strategy based on the mixed charged zwitterionic SAM protection might provide a promising method to surface tailoring of nanoparticles for biomedical application.     

Self-assembled monolayer of organic iodine on a Au surface for attachment of redox-active metal clusters

The attachment of a bifunctional iodo-organo-phosphinate compound to gold (Au) surfaces via chemisorption of the iodine atom is described and used to chelate a redox-active metal cluster via the phosphinate group. XPS, AFM, and electrochemical measurements show that (4-iodo-phenyl)phenyl phosphinic acid (IPPA) forms a tightly bound self-assembled monolayer (SAM) on Au surfaces. The surface coverage of an IPPA monolayer on Au was quantified by an electrochemical method and found to be 0.40 +/- 0.03 nmol/cm2, roughly corresponding to 0.4 monolayers. We show that the Au/IPPA SAM, but not the underivatized Au, adsorbs Mn4O4(Ph2PO2)6 from solution by a phosphinate exchange reaction to yield Au/IPPA/Mn4O4(Ph2PO2)5 SAM. The resulting SAM is firmly bound and not removed by sonication, as confirmed by manganese XPS (Mn 2p1/2) and by AFM. Electrochemistry confirms that Mn4O4(Ph2PO2)6 is anchored on the Au/IPPA surface and that redox chemistry can be mediated between the electrode and the surface-attached complex. Mn4O4(Ph2PO2)6 contains the reactive Mn4O46+ cubane core, a redox-active bioinspired catalyst.     

Phase separation of a mixed self-assembled monolayer prepared via a stepwise method

Self-assembled monolayers (SAMs), a molecular-level assembly that forms spontaneously, provide a vehicle for investigating specific interactions at interfaces. This is particularly true for mixed SAMs that are composed of organosilanes with different chain lengths and/or chemical functionalities because they offer an adjustable surface for constructing 3D structures containing a variety of moieties. We recently observed that coadsorbed monolayers with different organosilanes on a Si wafer were separated into several tens or hundreds of nanometer domains that were rich in individual components. Several organosilanes, such as octadecyltrichlorosilane (OTS), octadecyltrimethoxysilane (OTMS), (3-mercaptopropyl)trimethoxysilane (MPTMS), and (3-aminopropryl)trimethoxysilane (APTMS), were used for regional separation. In this study, we propose a stepwise deposition method, namely, the deposition of a second siliane on a SAM substrate that creates intentional defects in the first silane. The surface morphologies were adjusted by the deposition sequence and immersion time of the silanes. As a result, a mixed SAM prepared by the proposed method showed effectively functionalized films compared to that prepared by the one-step method.     

Nanografting: modeling and simulation

We present a simple phenomenological model of the nanografting process with an emphasis on the formation of binary self-assembled monolayers. This model includes dynamical processes that are involved in natural growth experiments, including molecular deposition, surface diffusion, and the phase transition from physisorption to chemisorption, and we show that it predicts domain formation in ungrafted deposition that matches experiment. The one-order-of-magnitude faster kinetics that is found in the nanografting experiments compared to natural self-assembly (or unconstrained self-assembly) is described with a key assumption that the deposition rate is greatly enhanced in the small region confined between the back side of the AFM tip and the edge of the previously deposited self-assembled monolayer. Monte Carlo simulations based on this model reproduce experimental observations concerning the variation of SAM heterogeneity with AFM tip speed. Our simulations demonstrate that the faster the AFM tip displaces adsorbed molecules in a monolayer, the more heterogeneous are the monolayers formed behind the tip, as this allows space and time for the formation of phase-segregated domains.     

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers

In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)(2)(tmphen)]PF(6), (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air-water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as pi-A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. BAM images reveal a whole homogeneous monolayer, with gradually increasing reflectivity along the compression process up to reaching the collapse of this equimolecular monolayer at pi approximately equal to 37 mNm(-1). Increasing the molar ratio of DMPA in the mixture, the excess of lipid molecules organizes themselves forming dark flower-like domains of pure DMPA at high surface pressures, coexisting with the mixed Ir-dye/DMPA = 1:1 monolayer. On the other hand, unstable mixed monolayers are obtained by using an initial dye surface concentration higher than the equimolecular one. These mixed Langmuir monolayers have been successfully transferred onto solid substrates by the LB (Langmuir-Blodgett) technique.     

Construction of mixed mercaptopropionic acid/alkanethiol monolayers of controlled composition by structural control of a gold substrate with underpotentially deposited lead atoms.

Mixed monolayers of 3-mercaptopropionic acid (MPA) and alkanethiols of various chain lengths have been constructed on Au based on a novel concept, namely, control of the composition of the component thiols in mixed monolayers by controlling the surface structure of the substrate. The Au substrate surface was first modified with underpotentially deposited Pb (UPD Pb) atoms, followed by the formation of a self-assembled monolayer (SAM) of alkanethiol. The UPD Pb atoms were then oxidatively stripped from the surface to create vacant site, on which MPA was adsorbed to finally form the mixed monolayers. The surface coverages of Pb, alkanethiol and MPA, and the total numbers of thiols were determined using an electrochemical quartz crystal microbalance, X-ray photoelectron spectroscopy, and reductive desorption voltammetry. These results demonstrate that the surface coverage of MPA in the mixed monolayers is determined by the initial coverage of UPD Pb. Fourier transform infrared spectra also support this conclusion. The observed single peak in the cyclic voltammogram for the reductive desorption shows that MPA and alkanethiol do not form their single-component domains. Scanning tunneling microscopy revealed the single-row pinstripe structure for all the thiol adlayers formed during each step of the preparation. This shows that the surface structure of the mixed monolayers is determined by the structure of the initially formed SAM on Au partially covered with UPD Pb.     

Characterization and control of lipid layer fluidity in hybrid bilayer membranes

The main gel-to-liquid-crystal (LC) phase transition temperature, T(m), of the distal lipid layer in hybrid bilayer membranes (HBMs) under water was investigated using vibrational sum frequency spectroscopy (VSFS). VSFS has unique sensitivity to order/disorder transitions in the lipid acyl chains and can determine T(m) for the lipid monolayers in HBMs. We recently reported the observation that T(m) is raised and the transition width is broadened for the overlying phospholipid monolayer in HBM systems formed on densely packed crystalline self-assembled monolayers (SAMs) as compared to that of vesicles in solution. In this report, we establish that T(m) for the lipid layer of HBMs can be controlled by proper choice of the SAM underlayer. The SAM underlayer of the HBM was systematically altered by using an alkane thiol, a saturated thiolipid, a mixed SAM of a saturated lipid-pyridine disulfide, and finally a mixed SAM of an unsaturated lipid-pyridine disulfide. T(m) was measured for two different chain length saturated phosphatidylcholine lipid overlayers on these SAMs. The values obtained show that Tm of the lipid layer of HBMs is sensitive to the composition and/or packing density of molecules in the underlying SAM.     

In situ hydrolysis of imine derivatives on Au(111) for the formation of aromatic mixed self-assembled monolayers: multitechnique analysis of this tunable surface modification

This paper presents a novel method for preparing aromatic, mixed self-assembled monolayers (SAMs) with a dilute surface fraction coverage of protonated amine via in situ hydrolysis of C═N double bond on gold surface. Two imine compounds, (4'-(4-(trifluoromethyl)benzylideneamino)biphenyl-4-yl)methanethiol (CF(3)-C(6)H(4)-CH═N-C(6)H(4)-C(6)H(4)-CH(2)-SH, TFBABPMT) and (4'-(4-cyanobenzylideneamino)biphenyl-4-yl)methanethiol (CN-C(6)H(4)-CH═N-C(6)H(4)-C(6)H(4)-CH(2)-SH, CBABPMT), self-assembled on Au(111) to form highly ordered monolayers, which was demonstrated by infrared reflection absorption spectroscopy (IRRAS) and X-ray photoelectron spectroscopy (XPS). A nearly upright molecular orientation for CF(3)- and CN-terminated SAM was detected by near edge X-ray absorption fine structure (NEXAFS) measurements. Afterward, the acidic catalyzed hydrolysis was carried out in chloroform or an aqueous solution of acetic acid (pH = 3). Systematic studies of this hydrolysis process for CN-terminated SAM in acetic acid at 25 °C were performed by NEXAFS measurements. It was found that about 30% of the imine double bonds gradually cleaved in the first 40 min. Subsequently, a larger hydrolysis rate was observed due to the freer penetration of acetic acid in the SAM and resultant more open molecular packing. Furthermore, the molecular orientation in mixed SAMs did not change during the whole hydrolysis process. This partially hydrolyzed surface contains a controlled amount of free amines/ammonium ions which can be used for further chemical modifications.