Isomerism in rhodium(I) N,S-donor heteroscorpionates: ring substituent and ancillary ligand effects

The heteroscorpionate ligands [HB(taz)(2)(pz(R))](-) (pz(R) = pz, pz(Me2), pz(Ph)) and [HB(taz)(pz)(2)](-), synthesised from the appropriate potassium hydrotris(pyrazolyl)borate salt and 4-ethyl-3-methyl-5-thioxo-1,2,4-triazole (Htaz), react with [{Rh(cod)(μ-Cl)}(2)] to give [Rh(cod)Tx] {Tx = HB(taz)(2)(pz), HB(taz)(2)(pz(Me2)), HB(taz)(2)(pz(Ph)), HB(taz)(pz)(2)}; the heteroscorpionate rhodaboratrane [Rh{B(taz)(2)(pz(Me2))}{HB(taz)(2)(pz(Me2))}] is the only isolable product from the reaction of [{Rh(nbd)(μ-Cl)}(2)] with K[HB(taz)(2)(pz(Me2))]. Carbonylation of the cod complexes gave a mixture of [Rh(CO)(2)Tx] and [(RhTx)(2)(μ-CO)(3)] which reacts with PR(3) to give [Rh(CO)(PR(3))Tx] (R = Cy, NMe(2), Ph, OPh). In the solid state the complexes are square planar with the particular structure dependent on the steric and/or electronic properties of the scorpionate and ancillary ligands. The complex [Rh(cod){HB(taz)(pz)(2)}] has the heteroscorpionate κ(2)[N(2)]-coordinated to rhodium with the B-H bond directed away from the rhodium square plane while [Rh(cod){HB(taz)(2)(pz(Me2))}] is κ(2)[SN]-coordinated, with the B-H bond directed towards the metal. The complexes [Rh(CO)(PPh(3)){HB(taz)(2)(pz)}] and [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Me2))}] are also κ(2)[SN]-coordinated but with the pyrazolyl ring cis to PPh(3); in the former the B-H bond is directed towards rhodium while in the latter the ring is pseudo-parallel to the rhodium square plane, as also found for [Rh(CO)(2){HB(taz)(2)(pz(Me2))}]. The analogues [Rh(CO)(PR(3)){HB(taz)(2)(pz(Me2))}] (R = Cy, NMe(2)) have the phosphines trans to the pyrazolyl ring. Uniquely, [Rh(CO)(PPh(3)){HB(taz)(2)(pz(Ph))}] is κ(2)[S(2)]-coordinated. A qualitative mechanism is given for the rapid ring-exchange, and hence isomerisation, observed in solution.     

New ligand systems incorporating two and three 4,4'-bipyridine units. Characterization of bi- and trimetallic rhodium and iridium complexes

The synthesis of new ligand systems based on the bipyridine unit for bi- and trimetallic complexes, including a rare example of a chiral bimetallic complex, is presented. Ligands BBPX (bis-bipyridine-xylene, 3) and TBPBX (tris-bipyridine-bis-xylene, 4) were prepared in one step by reacting alpha,alpha'-dibromo-o-xylene (2) with 2 equiv of the monolithiated derivative of 4,4'-dimethyl-2,2'-bipyridine. Dilithium (S)-binaphtholate (5) reacted with 2 equiv of 4-bromomethyl-4'-methyl-2,2'-bipyridine (6), affording ligand (S)-BBPBINAP (bis-bipyridine-binaphtholate, 7). These ligands reacted cleanly with 1, 1.5, and 1 equiv of the rhodium dimer [Rh(2)Cl(2)(HD)(2)] (HD = 1,5-hexadiene), respectively. Chloride abstraction led to the isolation of the cationic complexes BBPX[Rh(HD)BF(4)](2) (8), TBPBX[Rh(HD)BF(4)](3) (10), and (S)-BBPBINAP[Rh(HD)BF(4)](2) (12). When BBPX (3), TBPBX (4), and (S)-BBPBINAP (7) were added to 2, 3, and 2 equiv of [Rh(NBD)(2)]BF(4) or [Rh(NBD)(CH(3)CN)(2)]BF(4) (NBD = norbornadiene), respectively, clean formation of BBPX[Rh(NBD)BF(4)](2) (9), TBPBX[Rh(NBD)BF(4)](3) (11), and (S)-BBPBINAP[Rh(NBD)BF(4)](2) (13) was observed. The neutral iridium complex (S)-BBPBINAP[IrCl(COD)](2) (14) was obtained by reaction of (S)-BBPBINAP (7) with 1 equiv of [Ir(2)Cl(2)(COD)(2)] (COD = cyclooctadiene). The complexes were fully characterized including X-ray structural studies of 8, 9, and 13, and preliminary studies on their catalytic activity were performed.     

Comparison of structure and reactivity of phosphine-amido and hemilabile phosphine-amine chelates of rhodium

A series of mono- and binuclear rhodium(I) complexes bearing ortho-phosphinoanilido and ortho-phosphinoaniline ligands has been synthesized. Reactions of the protic monophosphinoanilines, Ph(2)PAr or PhPAr(2) (Ar = o-C(6)H(4)NHMe), with 0.5 equiv of [Rh(μ-OMe)(COD)](2) result in the formation of the neutral amido complexes, [Rh(COD)(P,N-Ph(2)PAr(-))] or [Rh(COD)(P,N-PhP(Ar(-))Ar)] (Ar(-) = o-C(6)H(4)NMe(-)), respectively, through stoichiometrically controlled deprotonation of an amine by the internal methoxide ion. Similarly, the binuclear complex, [Rh(2)(COD)(2)(μ-P,N,P',N'-mapm(2-))] (mapm(2-) = Ar(Ar(-))PCH(2)P(Ar(-))Ar), can be prepared by reaction of the protic diphosphinoaniline, mapm (Ar(2)PCH(2)PAr(2)), with 1 equiv of [Rh(μ-OMe)(COD)](2). An analogous series of hemilabile phosphine-amine compounds can be generated by reactions of monophosphinoanilines, Ph(2)PAr' or PhPAr'(2) (Ar' = o-C(6)H(4)NMe(2)), with 1 equiv of [Rh(NBD)(2)][BF(4)] to generate [Rh(NBD)(P,N-Ph(2)PAr')][BF(4)] or [Rh(NBD)(P,N-PhPAr'(2))][BF(4)], respectively, or by reactions of diphosphinoanilines, mapm or dmapm (Ar'(2)PCH(2)PAr'(2)), with 2 equiv of the rhodium precursor to generate [Rh(2)(NBD)(2)(μ-P,N,P',N'-mapm)][BF(4)](2) or [Rh(2)(NBD)(2)(μ-P,N,P',N'-dmapm)][BF(4)](2), respectively. Displacement of the diolefin from [Rh(COD)(P,N-Ph(2)PAr(-))] by 1,2-bis(diphenylphosphino)ethane (dppe) yields [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] which, while unreactive to H(2), reacts readily and irreversibly with oxygen to form the peroxo complex, [RhO(2)(P,P'-dppe)(P,N-Ph(2)PAr(-))], and with iodomethane to yield [RhI(CH(3))(P,P'-dppe)(P,N-Ph(2)PAr(-))]. Hemilabile phosphine-amine compounds can also be prepared by reactions of [Rh(P,P'-dppe)(P,N-Ph(2)PAr(-))] with Me(3)OBF(4) or HBF(4)·Et(2)O, resulting in (thermodynamic) additions at nitrogen to form [Rh(P,P'-dppe)(P,N-Ph(2)PAr')][BF(4)] or [Rh(P,P'-dppe)(P,N-Ph(2)PAr)][BF(4)], respectively. The nonlabile phosphine-amido and hemilabile phosphine-amine complexes were tested as catalysts for the silylation of styrene. The amido species do not require the use of solvents in reaction media, can be easily removed from product mixtures by protonation, and appear to be more active than their hemilabile, cationic congeners. Reactions catalyzed by either amido or amine complexes favor dehydrogenative silylation in the presence of excess olefin, showing modest selectivities for a single vinylsilane product. The binuclear complexes, which were prepared in an effort to explore possible catalytic enhancements of reactivity due to metal-metal cooperativity, are in fact somewhat less active than mononuclear species, discounting this possibility.     

Synthesis and reactivity of fluoro complexes: Part 2. Rhodium(I) fluoro complexes with alkene and phosphine ligands. Synthesis of the first isolated rhodium(I) bifluoride complexes. Structure of [Rh3(mu3-OH)2(COD)(3)](HF2) by X-ray powder diffraction

The reaction between [Rh(mu-OH)(COD)](2) (COD = 1,5-cyclooctadiene) and 73% HF in THF gives [Rh(3)(mu(3)-OH)(2)(COD)(3)](HF(2)) (1). Its crystal structure, determined by ab initio X-ray powder diffraction methods (from conventional laboratory data), contains complex trimetallic cations linked together in 1D chains by a mu(3)-OH...F-H-F...HO-mu(3) sequence of strong hydrogen bonds. The complex [Rh(mu-F)(COE)(2)](2) (COE = cyclooctene; 2), prepared by reacting [Rh(mu-OH)(COE)(2)](2) with NEt(3).3HF (3:2), has been characterized. Complex 1 reacts with PR(3) (1:3) to give [RhF(COD)(PR(3))] [R = Ph (3), C(6)H(4)OMe-4 (4), (i)Pr (5), Cy (6)] that can be prepared directly by reacting [Rh(mu-OH)(COD)](2) with 73% HF and PR(3) (1:2:2). The reactions of 1 with PPh(3) or Et(3)P have been studied by NMR spectroscopy at different molar ratios. Complexes [RhF(PEt(3))(3)] (7), [RhF(COD)(PEt(3))] (8), and [RhF(PPh(3))(3)] (9) have been detected. The complex [Rh(F)(NBD)(iPr(3)P)] (NBD = norbornadiene; 10) was prepared by the sequential treatment of [Rh(mu-OMe)(NBD)](2) with 1 equiv of NEt(3).3HF and (i)Pr(3)P. The first isolated bifluoride rhodium(I) complexes [Rh(FHF)(COD)(PR(3))] [R = Ph (11), (i)Pr (12), Cy (13)], obtained by reacting fluoro complexes 3, 5, and 6 with NEt(3).3HF (3:1), have been characterized. The crystal structures of 3 and 11 have been determined.     

Rhodium(I) indazole and indazolate complexes

The preparation of cationic indazole (HIdz) rhodium(I) complexes of the types [(diolefin)Rh(HIdz)₂]ClO₄ and [(CO)₂Rh(HIdz)₂]ClO₄ is described. Neutral binuclear rhodium(I) complexes of the type [Y₂Rh(μ-Idz)]₂ (Y₂  COD, TFB, NBD, (CO)₂ or (CO)(PPh₃)) are obtained by treating the corresponding complexes [Y₂RhCl]₂ with indazole and organic or inorganic bases. The cationic mononuclear derivatives react with the solvated species [Y₂Rh(acetone)_x]ClO₄ in the presence of triethylamine to give neutral binuclear complexes of the types [(CO)₂Rh(μ-Idz)₂Rh(diolefin)], [(Ph₃P)(CO)Rh(μ-Idz)₂Rh(diolefin)] and [(diolefin)Rh(μ-Idz)Rh(diolefin′)] (diolefin  COD, TFB or NBD; diolefin′  COD or TFB). Alternative methods for the synthesis of the binuclear complexes are also described.     

Rhenium complexes of tris(pyrazolyl)methanes and sulfonate derivative

The trioxo [ReO(3){SO(3)C(pz)(3)}] (1) (pz = pyrazolyl) and oxo [ReOCl{SO(3)C(pz)(3)}(PPh(3))]Cl (2) compounds with tris(pyrazolyl)methanesulfonate were obtained by treatment of Re(2)O(7) or [ReOCl(3)(PPh(3))(2)], respectively, with Li[SO(3)C(pz)(3)], whereas [ReCl(3){HC(pz)(3)}] (3), [ReCl(3){HC(3,5-Me(2)pz)(3)}] (4) and [ReCl(4){eta(2)-HC(pz)(3)}] (5) were prepared by reaction of [ReOCl(3)(PPh(3))(2)] (3,4) or [ReCl(4)(NCMe)(2)] (5) with hydrotris(pyrazolyl)methane HC(pz)(3) (3,5) or hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me(2)pz)(3) (4). [ReO{SO(3)C(pz)(3)}{OC(CH(3))(2)pz}][ReO(4)] 6, with a chelated pyrazolyl-alkoxide, was derived from an unprecedented ketone-pyrazolyl coupling on reaction of crude 1 with acetone. The compounds have been characterized by elemental analyses, IR and NMR spectroscopies, FAB-MS spectrometry and cyclic voltammetry and, in the case of 5 and 6, also by single-crystal X-ray diffraction. The electrochemical E(L) Lever parameter has been estimated, for the first time, for the SO(3)C(pz)(3)(-) and oxo ligands allowing the measurement of their electron-donor character and comparison with other ligands. Compounds 1, 2 and 6 appear to be the first tris(pyrazolyl)methanesulfonate complexes of rhenium to be reported.     

Intramolecular alkyl phosphine dehydrogenation in cationic rhodium complexes of tris(cyclopentylphosphine)

[Rh(nbd)(PCyp(3))(2)][BAr(F) (4)] (1) [nbd = norbornadiene, Ar(F) = C(6)H(3)(CF(3))(2), PCyp(3) = tris(cyclopentylphosphine)] spontaneously undergoes dehydrogenation of each PCyp(3) ligand in CH(2)Cl(2) solution to form an equilibrium mixture of cis-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 a) and trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 b), which have hybrid phosphine-alkene ligands. In this reaction nbd acts as a sequential acceptor of hydrogen to eventually give norbornane. Complex 2 b is distorted in the solid-state away from square planar. DFT calculations have been used to rationalise this distortion. Addition of H(2) to 2 a/b hydrogenates the phosphine-alkene ligand and forms the bisdihydrogen/dihydride complex [Rh(PCyp(3))(2)(H)(2)(eta(2)-H(2))(2)][BAr(F) (4)] (5) which has been identified spectroscopically. Addition of the hydrogen acceptor tert-butylethene (tbe) to 5 eventually regenerates 2 a/b, passing through an intermediate which has undergone dehydrogenation of only one PCyp(3) ligand, which can be trapped by addition of MeCN to form trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(PCyp(3))(NCMe)][BAr(F) (4)] (6). Dehydrogenation of a PCyp(3) ligand also occurs on addition of Na[BAr(F) (4)] to [RhCl(nbd)(PCyp(3))] in presence of arene (benzene, fluorobenzene) to give [Rh(eta(6)-C(6)H(5)X){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (7: X = F, 8: X = H). The related complex [Rh(nbd){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] 9 is also reported. Rapid ( approximately 5 minutes) acceptorless dehydrogenation occurs on treatment of [RhCl(dppe)(PCyp(3))] with Na[BAr(F) (4)] to give [Rh(dppe){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (10), which reacts with H(2) to afford the dihydride/dihydrogen complex [Rh(dppe)(PCyp(3))(H)(2)(eta(2)-H(2))][BAr(F) (4)] (11). Competition experiments using the new mixed alkyl phosphine ligand PCy(2)(Cyp) show that [RhCl(nbd){PCy(2)(Cyp)}] undergoes dehydrogenation exclusively at the cyclopentyl group to give [Rh(eta(6)-C(6)H(5)X){PCy(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (17: X = F, 18: X = H). The underlying reasons behind this preference have been probed using DFT calculations. All the complexes have been characterised by multinuclear NMR spectroscopy, and for 2 a/b, 4, 6, 7, 8, 9 and 17 also by single crystal X-ray diffraction.     

Hydride mobility in trinuclear sulfido clusters with the core [Rh3(μ-H)(μ3-S)2]: molecular models for hydrogen migration on metal sulfide hydrotreating catalysts

The treatment of [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{M(μ-Cl)(diolef)}(2)] (diolef=diolefin) in the presence of NEt(3) affords the hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(diolef){P(OPh)(3)}(4)] (diolef=1,5-cyclooctadiene (cod) for 1, 2,5-norbornadiene (nbd) for 2, and tetrafluorobenzo[5,6]bicyclo[2.2.2]octa-2,5,7-triene (tfb) for 3) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(cod){P(OPh)(3)}(4)] (4). Cluster 1 can be also obtained by treating [{Rh(μ-SH){P(OPh)(3)}(2)}(2)] with [{Rh(μ-OMe)(cod)}(2)], although the main product of the reaction with [{Ir(μ-OMe)(cod)}(2)] was [RhIr(2)(μ-H)(μ(3)-S)(2)(cod)(2){P(OPh)(3)}(2)] (5). The molecular structures of clusters 1 and 4 have been determined by X-ray diffraction methods. The deprotonation of a hydrosulfido ligand in [{Rh(μ-SH)(CO)(PPh(3))}(2)] by [M(acac)(diolef)] (acac=acetylacetonate) results in the formation of hydrido-sulfido clusters [Rh(3)(μ-H)(μ(3)-S)(2)(CO)(2) (diolef)(PPh(3))(2)] (diolef=cod for 6, nbd for 7) and [Rh(2)Ir(μ-H)(μ(3)-S)(2)(CO)(2)(cod)(PPh(3))(2)] (8). Clusters 1-3 and 5 exist in solution as two interconverting isomers with the bridging hydride ligand at different edges. Cluster 8 exists as three isomers that arise from the disposition of the PPh(3) ligands in the cluster (cis and trans) and the location of the hydride ligand. The dynamic behaviour of clusters with bulky triphenylphosphite ligands, which involves hydrogen migration from rhodium to sulfur with a switch from hydride to proton character, is significant to understand hydrogen diffusion on the surface of metal sulfide hydrotreating catalysts.     

T-shaped platinum boryl complexes: synthesis and structure

A series of cationic T-shaped 14-electron boryl complexes of the type trans-[(Cy(3)P)(2)Pt{B(X)X'}](+) (X=Br; X'=ortho-tolyl, tBu, NMe(2), piperidyl, Br; XX'=(NMe(2))(2), catecholato) were synthesized by halide abstraction from trans-[(Cy(3)P)(2)Pt(Br){B(X)X'}] (Cy=cyclohexyl) with Na[BAr(f) (4)] (Ar(f)=3,5-(CF(3))(2)C(6)H(3)), K[B(C(6)F(5))(4)], or Na[BPh(4)]. X-ray diffraction studies were performed on all compounds, revealing a subtle correlation between the trans-influence of the boryl moiety and the Pt--H and Pt--C separations. However, no notable agostic C--H interaction with the platinum center was detected. trans-[(Cy(3)P)(2)Pt(BCat)](+) (Cat=catecholato), the complex with the shortest Pt--H and Pt--C distances, was treated with Lewis bases (L), forming compounds of the type trans-[(Cy(3)P)(2)Pt(L)(BCat)](+), thus proving a decisive influence of the degree of trans-influence exerted by the boryl ligands on the chemical reactivity of the title complexes. Another point that was investigated and clarified is the different behavior of trans-[(Cy(3)P)(2)Pt(Br){B(Br)Mes}] (Mes=mesityl) towards K[B(C(6)F(5))(4)] with formation of the borylene species trans-[(Cy(3)P)(2)Pt(Br)(BMes)](+).     

Experimental and DFT study of the tautomeric behavior of cobalt-containing secondary phosphine oxides

New cobalt-containing secondary phosphine oxides [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(4){mu,eta-PhC[triple chemical bond]CP(==O)(H)(R)}] (8 a: R=tBu; 8 b: R=Ph) were prepared by reaction of secondary phosphine oxides PhC[triple chemical bond]CP- (==O)(H)(R) (6 a: R=tBu; 6 b: R=Ph) with dppm-bridged dicobalt complex [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(6)] (2). The molecular structures of 8 a and 8 b were determined by single-crystal X-ray diffraction. Although palladium-catalyzed Heck reactions employing 8 b as ligand gave satisfying results, 8 a performed poorly in the same reaction. Judging from these results, a tautomeric equilibrium between 8 b and its isomeric form [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(4){mu,eta-PhC[triple chemical bond]CP(OH)(Ph)}] 8 b' indeed takes place, but it is unlikely between 8 a and [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(4){mu,eta-PhC[triple chemical bond]CP(OH)(tBu)}] (8 a'). The DFT studies demonstrated that reasonable activation energies for the tautomeric conversions can be achieved only via a bimolecular pathway. Since a tBu group is much larger than a Ph group, the conversion is presumably only feasible in the case of 8 bright harpoon over left harpoon8 b', but not in the case of 8 aright harpoon over left harpoon8 a'. Another cobalt-containing phosphine, namely, [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(4){mu,eta-PhC[triple chemical bond]CP(NEt(2))(tBu)}] (7 a), and its oxidation product [(mu-PPh(2)CH(2)PPh(2))Co(2)(CO)(4){mu,eta-PhC[triple chemical bond]CP(==O)(NEt(2))(tBu)}] 7 a' were prepared from the reaction of PhC[triple chemical bond]CP(NEt(2))(tBu) (5 a) with 2. The molecular structures of 7 a and 7 a' were determined by single-crystal X-ray diffraction. The phosphorus atom is surrounded by substituents in a tetrahedral environment. A P--N single bond (1.676(3) A) is observed in the molecular structure of 7 a. Heck reactions employing 7 a/Pd(OAc)(2) as catalyst system exhibited efficiency comparable to that of 8 a/Pd(OAc)(2).     

Mono- and dinuclear cobalt complexes with chelating or bridging bidentate P,N phosphino- and phosphinito-oxazoline ligands: synthesis, structures and catalytic ethylene oligomerisation

Cobalt(ii) complexes of the type [CoCl(2)(P,N)], where P,N represents a heterobidentate phosphino- or phosphinito-oxazoline-type ligand, have been synthesised and characterised by infrared spectroscopy and elemental analysis. Their molecular structures were established by single-crystal X-ray diffraction in the solid state. Whereas the phosphino-oxazoline complex [CoCl(2){Ph(2)PCH(2)ox(Me2)}] (Ph(2)PCH(2)ox(Me2) = 2-[(diphenylphosphanyl)-methyl]-4,4-dimethyl-4,5-dihydro-oxazole) () and the phosphinito-oxazoline complexes [CoCl(2){Ph(2)POCH(2)ox(Me2)}] (Ph(2)POCH(2)ox(Me2) = 1-[4,4-dimethyl-2{1-oxy(diphenylphosphino)-1-methyl}]-4,5-dihydro-oxazole) () and [CoCl(2){Ph(2)POCMe(2)ox(Me2)}] (Ph(2)POCMe(2)ox(Me2) = 1-[4,4-dimethyl-2- [1-oxy(diphenylphosphino)-1-methylethyl]]-4,5-dihydrooxazole) () are mononuclear, the phosphino-oxazoline complexes [CoCl(2){micro-i-Pr(2)PCH(2)ox}](2) (i-Pr(2)PCH(2)ox = 2-[(diisopropyl-phosphanyl)-methyl]-4,5-dihydro-oxazole) () and [CoCl(2){micro-Ph(2)PCH(2)ox}](2) (Ph(2)PCH(2)ox = 2-[(diphenyl-phosphanyl)-methyl]-4,5-dihydro-oxazole) () are dinuclear compounds and contain two bridging phosphino-oxazoline ligands which form a 10-membered ring. In the course of this work, the zwitterionic complex [CoCl(3){Ph(2)PCH(2)C(O)OCH(2)CMe(2)NH(3)] () was obtained and characterised by X-ray diffraction in which the oxazoline ring has been opened. Air-oxidation of the phosphine function of the mononuclear P,N chelate complex yielded the blue N,O-bridged, centrosymmetric dinuclear complex [[upper bond 1 start]CoCl(2){micro-OPPh(2)CH(2)[lower bond 1 start]C[double bond, length as m-dash]N[upper bond 1 end]CMe(2)CH(2)O[lower bond 1 end]}](2) () which contains a 12-membered ring. All these complexes are paramagnetic and their magnetic moments in solution were measured by the Evans method. Complexes were evaluated in the catalytic oligomerisation of ethylene with AlEtCl(2) or methylaluminoxane (MAO) as cocatalysts and provided moderate activities. In the presence of AlEtCl(2) (6-14 equiv.), the selectivities for ethylene dimers were higher than 92% and complex showed the highest turnover frequency with 14 equiv. of AlEtCl(2). When MAO was used as cocatalyst, the catalytic activities were similar to those with AlEtCl(2) but significant amounts of C(6)-C(12) oligomers were produced.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Bis(2-diphenylphosphinoxynaphthalen-1-yl)methane: transition metal chemistry, Suzuki cross-coupling reactions and homogeneous hydrogenation of olefins

Transition metal complexes of bis(2-diphenylphosphinoxynaphthalen-1-yl)methane (1) are described. Bis(phosphinite) 1 reacts with Group 6 metal carbonyls, [Rh(CO)2Cl]2, anhydrous NiCl2, [Pd(C3H5)Cl]2/AgBF4 and Pt(COD)I2 to give the corresponding 10-membered chelate complexes 2, 3 and 5-8. Reaction of 1 with [Rh(COD)Cl]2 in the presence of AgBF4 affords a cationic complex, [Rh(COD){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}]BF4 (4). Treatment of 1 with AuCl(SMe2) gives mononuclear chelate complex, [(AuCl){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}] (9) as well as a binuclear complex, [Au(Cl){mu-Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}AuCl] (10) with ligand 1 exhibiting both chelating and bridged bidentate modes of coordination respectively. The molecular structures of 2, 6, 7, 9 and 10 are determined by X-ray studies. The mixture of Pd(OAc)2 and effectively catalyzes Suzuki cross-coupling reactions of a range of aryl halides with aryl boronic acid in MeOH at room temperature or at 60 degrees C, giving generally high yields even under low catalytic loads. The cationic rhodium(I) complex, [Rh(COD){Ph2P(-OC10H6)(mu-CH2)(C10H6O-)PPh2-kappaP,kappaP}]BF4 (4) catalyzes the hydrogenation of styrenes to afford the corresponding alkyl benzenes in THF at room temperature or at 70 degrees C with excellent turnover frequencies.     

Hybrid dibismuthines and distibines as ligands towards transition metal carbonyls

The hybrid dibismuthines O(CH(2)CH(2)BiPh(2))(2) and MeN(CH(2)-2-C(6)H(4)BiPh(2))(2) react with [M(CO)(5)(thf)] (M = Cr or W) to form [{M(CO)(5)}(2){O(CH(2)CH(2)BiPh(2))(2)}] and [{Cr(CO)(5)}(2){MeN(CH(2)-2-C(6)H(4)BiPh(2))(2)}] containing bridging bidentate (Bi(2)) coordination. The unsymmetrical tertiary bismuthine complexes [M(CO)(5){BiPh(2)(o-C(6)H(4)OMe)}] are also described. Depending upon the molar ratio, the hybrid distibines O(CH(2)CH(2)SbMe(2))(2) and MeN(CH(2)-2-C(6)H(4)SbMe(2))(2) react with [M(CO)(5)(thf)] to give the pentacarbonyl complexes [{M(CO)(5)}(2){O(CH(2)CH(2)SbMe(2))(2)}] and [{Cr(CO)(5)}(2){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] or tetracarbonyls cis-[M(CO)(4){O(CH(2)CH(2)SbMe(2))(2)}] and cis-[M(CO)(4){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}]. The latter can also be obtained from [Cr(CO)(4)(nbd)] or [W(CO)(4)(pip)(2)], and contain chelating bidentates (Sb(2)-coordinated) as determined crystallographically. S(CH(2)-2-C(6)H(4)SbMe(2))(2) coordinates as a tridentate (SSb(2)) in fac-[M(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}] (M = Cr or Mo) and fac-[Mn(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)]. Fac-[Mn(CO)(3){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)] contains NSb(2)-coordinated ligand in the solid state, but in solution a second species, Sb(2)-coordinated and with a κ(1)-CF(3)SO(3) replacing the coordinated amine is also evident. X-ray crystal structures were also determined for fac-[Cr(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}], fac-[Mn(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)] and fac-[Mn(CO)(3){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] [CF(3)SO(3)]. Hypervalent N···Sb interactions are present in cis-[M(CO)(4){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] (M = Mo or W), but absent for M = Cr.     

Investigation of silver salt metathesis: preparation of cationic germanium(II) and Tin(II) complexes,and silver adducts containing unsupported silver-germanium and silver-tin bonds

Syntheses of halide derivatives of germanium(II) and tin(II) aminotroponiminate (ATI) complexes and their silver salt metathesis reactions have been investigated. The treatment of GeCl(2) x (1,4-dioxane), SnCl(2), or SnI(2) with [(n-Pr)(2)ATI]Li in a 1:1 molar ratio affords the corresponding germanium(II) or tin(II) halide complex [(n-Pr)(2)ATI]MX (where [(n-Pr)(2)ATI](-) = N-(n-propyl)-2-(n-propylamino)troponiminate; M = Ge or Sn; X = Cl or I). As usually expected, [(n-Pr)(2)ATI]GeCl and [(n-Pr)(2)ATI]SnCl undergo rapid metathesis with CF(3)SO(3)Ag, leading to trifluoromethanesulfonate salts, [[(n-Pr)(2)ATI]Ge][SO(3)CF(3)] and [[(n-Pr)(2)ATI]Sn][SO(3)CF(3)], and silver chloride. However, when the silver source [HB(3,5-(CF(3))(2)Pz)(3)]Ag(eta(2)-toluene) is used, rather than undergoing metathesis, very stable 1:1 adducts [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Ge(Cl)[(n-Pr)(2)ATI] and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI] are formed (where [HB(3,5-(CF(3))(2)Pz)(3)](-) = hydrotris(3,5-bis(trifluoromethyl)pyrazolyl)borate). The use of the iodide derivative [(n-Pr)(2)ATI]SnI did not change the outcome either. All new compounds have been characterized by multinuclear NMR spectroscopy and X-ray crystallography. The Ag-Ge and Ag-Sn bond distances of [HB(3,5-(CF(3))(2)Pz)(3)]Ag<-- Ge(Cl)[(n-Pr)(2)ATI], [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(Cl)[(n-Pr)(2)ATI], and [HB(3,5-(CF(3))(2)Pz)(3)]Ag<--Sn(I)[(n-Pr)(2)ATI] are 2.4142(6), 2.5863(6), and 2.5880(10) A, respectively. A convenient route to [(n-Pr)(2)ATI]H is also reported.     

A series of [3 + 2] cycloaddition products from the reaction of rhenium oxo complexes with diphenyl ketene

The reaction of rhenium (VII) trioxo complexes containing the ligand sets scorpionate, [HB(pz)3]ReO3 (6), [Ph-B(pz)3]ReO3 (7), and [[HC(pz)3]ReO3][ReO4] (8) and pyridine/pyridine-type ligands [(4,7-diphenyl-1,10-phen)(Br)ReO3] (12), [(4,4'-di-tert-butyl-2,2'-dipyridyl)(Cl)ReO3] (13), and [(py)2Re(Cl)O3] (4), with diphenyl ketene, has led to the isolation of six novel [3 + 2] cycloaddition products. These air-stable solids 9-11 and 15-17 are the result of [3 + 2] addition of the O=Re=O motif across the ketene C=C double bond. Five of the six [3 + 2] cycloaddition products have been structurally characterized by single-crystal X-ray diffraction and in all cases by 13C NMR and IR spectroscopies.     

The beta-dialdiminato ligand [{N(C6H3Pri(2)-2,6)C(H)}2CPh]-: the conjugate acid and Li, Al, Ga and In derivatives

The synthesis of the following crystalline complexes is described: [Li(L)(thf)2] (), [Li(L)(tmeda)] (), [MCl2(L)] [M=Al (), Ga ()], [In(Cl)(L)(micro-Cl)2Li(OEt2)2] (), [In(Cl)(L){N(H)C6H3Pri(2)-2,6}] (), [In(L){N(H)C6H3Pri(2)-2,6}2] (), [{In(Cl)(L)(micro-OH)}2] (), [L(Cl)In-In(Cl)(L)] () (the thf-solvate, the solvate-free and the hexane-solvate), [{In(Cl)L}2(micro-S)] () and [InCl2(L)(tmeda)] () ([L]-=[{N(C6H3Pri(2)-2,6)C(H)}2CPh]-). From H(L) (), via Li(L) in Et2O, and thf, tmeda, AlCl3, GaCl3 or InCl3 there was obtained , , , or , respectively in excellent yield. Compound was the precursor for each of , and [{InCl3(tmeda)2{micro-(OSnMe2)2}}] () by treatment with one () or two () equivalents of K[N(H)(C6H3Pri(2)-2,6)], successively Li[N(SiMe3)(C6H3Pri(2)-2,6)] and moist air (), Na in thf (), tmeda (), or successively tmeda and Me3SnSnMe3 (). Crystals of (with an equivalent of In) and were obtained from InCl or thermolysis of [In(Cl)(L){N(SiMe3)(C6H3Pri(2)-2,6)}] () {prepared in situ from and Li[N(SiMe3)(C6H3Pri(2)-2,6)] in Et2O}, respectively. Compound was obtained from a thf solution of and sulfur. X-Ray data for crystalline , , , , , and are presented. The M(L) moiety in each (not the L-free ) has the monoanionic L ligated to the metal in the N,N'-chelating mode. The MN1C1C2C3N2 six-membered M(L) ring is pi-delocalised and has the half-chair (, and ) or boat (, and ) conformation.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Highly Strained Heterometallacycles of Group 4 Metallocenes with Bis(diphenylphosphino)amide Ligands

A study regarding coordination chemistry of the bis(diphenylphosphino)amide ligand Ph(2) P-N-PPh(2) at Group?4 metallocenes is presented herein. Coordination of N,N-bis(diphenylphosphino)amine (1) to [(Cp(2) TiCl)(2) ] (Cp=η(5) -cyclopentadienyl) generated [Cp(2) Ti(Cl)P(Ph(2) )N(H)PPh(2) ] (2). The heterometallacyclic complex [Cp(2) Ti(κ(2) -P,P-Ph(2) P-N-PPh(2) )] (3?Ti) can be prepared by reaction of 2 with n-butyllithium as well as from the reaction of the known titanocene-alkyne complex [Cp(2) Ti(η(2) -Me(3) SiC(2) SiMe(3) )] with the amine 1. Reactions of the lithium amide [(thf)(3) Li{N(PPh(2) )(2) }] with [Cp(2) MCl(2) ] (M=Zr, Hf) yielded the corresponding zirconocene and hafnocene complexes [Cp(2) M(Cl){κ(2) -N,P-N(PPh(2) )(2) }] (4?Zr and 4?Hf). Reduction of 4?Zr with magnesium gave the highly strained heterometallacycle [Cp(2) Zr(κ(2) -P,P-Ph(2) P-N-PPh(2) )] (3?Zr). Complexes 2, 3?Ti, 4?Hf, and 3?Zr were characterized by X-ray crystallography. The structures and bondings of all complexes were investigated by DFT calculations.     

Novel class of heterometallic cubane and boride clusters containing heavier group 16 elements

Thermolysis of an in situ generated intermediate, produced from the reaction of [Cp*MoCl(4)] (Cp* = η(5)-C(5)Me(5)) and [LiBH(4).THF], with excess Te powder yielded isomeric [(Cp*Mo)(2)B(4)TeH(5)Cl] (2 and 3), [(Cp*Mo)(2)B(4)(μ(3)-OEt)TeH(3)Cl] (4), and [(Cp*Mo)(4)B(4)H(4)(μ(4)-BH)(3)] (5). Cluster 4 is a notable example of a dimolybdaoxatelluraborane cluster where both oxygen and tellurium are contiguously bound to molybdenum and boron. Cluster 5 represents an unprecedented metal-rich metallaborane cluster with a cubane core. The dimolybdaheteroborane 2 was found to be very reactive toward metal carbonyl compounds, and as a result, mild pyrolysis of 2 with [Fe(2)(CO)(9)] yielded distorted cubane cluster [(Cp*Mo)(2)(BH)(4)(μ(3)-Te){Fe(CO)(3)}] (6) and with [Co(2)(CO)(8)] produced the bicapped pentagonal bipyramid [(Cp*MoCo)(2)B(3)H(2)(μ(3)-Te)(μ-CO){Co(3)(CO)(6)}] (7) and pentacapped trigonal prism [(Cp*MoCo)(2)B(3)H(2)(μ(3)-Te)(μ-CO)(4){Co(6)(CO)(8)}] (8). The geometry of 8 is an example of a heterometallic boride cluster in which five Co and one Mo atom define a trigonal prismatic framework. The resultant trigonal prism core is in turn capped by two boron, one Te, and one Co atom. In the pentacapped trigonal prism unit of 8, one of the boron atoms is completely encapsulated and bonded to one molybdenum, one boron, and five cobalt atoms. All the new compounds have been characterized in solution by IR, (1)H, (11)B, and (13)C NMR spectroscopy, and the structural types were unambiguously established by crystallographic analysis of 2 and 4-8.