STUDIES ON ION IMPLANTATION AND ELECTRICAL PROPERTIES OF POLYACETYLENE FILMS

The effects of ion implantation on ployacetylene films PA have been studied with Ar~+, Fe~+, C1~+, I~+, Na~+ and K~+ ions in the energy range of 15—30 keV. The changes of PA films in the electrical conductivity, due to chemical doping and ion implantation in relation to their structure and depth profiles of impurities, were measured through infrared (ATR/FTIK), Rutherford backscattering spectrometry (RBS) and the four probe technique. In all cases, ion implantation of active ions exhibits the same effects as chemical doping. The formation of p-n junction is observed at the interface of implanted region and chemical doped PA substrate. The mechanism of interaction process between ion beam and polymer is also discussed.     

EFFECT OF VINYL ACETATE CONTENT ON THE MECHANICAL PROPERTIES AND MORPHOLOGICAL STRUCTURES OF POLYPROPYLENE

The effect of vinyl acetate （VA） content in ethylene vinyl acetate （EVA） copolyrner on the mechanical properties of polypropylene was investigated. Three different EVA copolymers with concentrations of 3 wt%, 6 wt%, 9 wt%, 12 wt% and 15 wt%, were blended to polypropylene. The mechanical properties such as yield and tensile strengths, elastic modulus, Izod impact strength, hardness and melt flow index of the blends were investigated. Relationship between type of vinyl acetate and concentrations, mechanical, MFI and morphological properties were explored.     

A STUDY ON MECHANICAL PROPERTIES OF γ-RAY IRRADIATED HDPE FILLED WITH SERICITE-TRIDYMITE-CRISTOBALITE*

The effect of γ-ray irradiation on the mechanical properties of high densitypolyethylene(HDPE) filled with sericite-tridymite-cristobalite(STC) was studied. The ex-perimental results show that γ-ray irradiation can improve the affinity between HDPE andSTC, and the dispersion of STC in HDPE matrix. Compared with HDPE/STC (80/20)blend, the yield stress and impact strength of irradiated HDPE (10kGy)/STC (80/20) blendare increased from 22.8 MPa and 70J/m to 28.5 MPa and 144J/m. The yield stress andimpact strength of HDPE/irradiated HDPE/STC (48/32/20) are 27.8MPa and 210J/m,respectively.     

MISCIBILITY, CRYSTALLIZATION AND MECHANICAL PROPERTIES OF PPC/PBS BLENDS

In this paper,melt blends of poly(propylene carbonate)(PPC)with poly(butylene succinate)(PBS)were characterized by dynamic mechanical analysis(DMA),differential scanning calorimetry(DSC),tensile testing,wide-angle X-ray diffraction(WAXD),polarized optical microscopy and thermogravimetric analysis(TGA).The results indicated that the glass transition temperature of PPC in the 90/10 PPC/PBS blend was decreased by about 11K comparing with that of pure PPC.The presence of 10% PBS was partially miscible with PPC.The 90/10 PPC/PBS blend had better impact ==========and tensile strength than those of the other PPC/PBS blends.The glass transition temperature of PPC in the 80/20,70/30,and 60/40 PPC/PBS blends was improved by about 4.9 K,4.2 K,and 13 K comparing with that of pure PPC,respectively;which indicated the immiscibility between PPC and PBS.The DSC results indicated that the crystallization of PBS became more difficult when the PPC content increased.The matrix of PPC hindered the crystallization process of PBS.While the content of PBS was above 20%,significant crystallization-induced phase separation was observed by polarized optical microscopy. It was found from the WAXD analysis that the crystal structure of PBS did not change,and the degree of crystallinity increased with increasing PBS content in the PPC/PBS blends.     

NMR RELAXIVITY AND IMAGING OF NEUTRAL MACROMOLECULAR POLYESTER GADOLINIUM(Ⅲ)COMPLEXES*

Five neutral macromolecular polyester gadolinium (Ⅲ) complexes with pendant hydrophobic alkyland aromatic functional groups were prepared. The longitudinal relaxation rates of these complexes weremeasured. One of these Gd (Ⅲ) complexes was chosen for the acute toxicity test and T_1-weighted imagingmeasurement. Preliminary results showed that. compared with Gd-DTPA. the neutral macromoleculargadolinium (Ⅲ) complexes provide higher T_1 relaxivity enhancement and longer function duration.     

EFFECT OF SEQUENCE STRUCTURE ON THE THERMOTROPIC LIQUID CRYSTALLINE PROPERTIES OF POLYESTERAMIDES BASED ON DIMETHYLBENZIDINE, BISPHENOL-A AND ρ-TEREPHTHALYL CHLORIDE*

A series of thermotropic liquid crystalline polyesteramides with differ-ent sequence structure based on dimethylbenzidine (DMBD), bisphenol-A(BPA) and p-terephthalyl chloride (TPC) was synthesized by changing the feeding order of monomers inlow temperature solution polycondensation system. By means of NMR and a computer pro-gram the sequence structure parameters were measured. The effect of sequence structureon liquid crystalline phase transition temperature of PEAs obtained was investigated.     

NONLINEAR OPTICAL PROPERTIES OF X-TYPE CHROMOPHORES AND THEIR DOPED FILMS

Two X-type chromophores, 2-[4-(4,5-di(4-nitrophenyl) imidazolyl) phenyl]-4,5-di(4-methoxyphenyl)-imidazole (DNPIPDMOPI), 2-[4-(4,5-di(4-nitrophenyl)-imidazolyl) phenyl]-4,5-di(4-aminophenyl)-imidazole (DNPIPDAPI), were synthesized and characterized. The results show that they possess good nonlinearity, considerable blue-shifted absorption (385 nm and 379 nm in THF) and high decomposition temperature (377℃ and 405℃). These mean that the X-type chromophores possess a rather good nonlinearity-transparency-thermal stability trade-off. The multi-step corona-poling technique at elevated temperature and in-situ SHG measurements were used to obtain and evaluate the poled films of these chromophores doped in PMMA. The largest SHG signals appeared at 110-120℃, which are 12.5 pm/V and 16.7 pm/V respectively. The dependence of poling induced orientation stability on temperature was measured by depoling experiments and the results indicate that the poling-induced orientation of the films is stable at about 100℃. Theoretic analyses imply that better orientation stability arises from the X-type structure of chromophore. The X-type chromophore has two crossed intramolecular CT, both βxxx and βxyy can contribute to the second-order susceptibility, and the ratio of the tensorial components (γ = βxyy/βxxx) is about 1/3, so the orientation decay of the films induced by rising temperature will provide a certain compensation for the contribution of βxyy of chromophores.     

EFFECT OF DRAWING ON MORPHOLOGY,STRUCTURE AND MECHANICAL PROPERTIES OF BLENDS OF A LIQUID CRYSTALLINE POLYMER AND MODIFIED POLY(PHENYLENE OXIDE)

Polymer strands with various draw ratios of a thermotropic liquid crystalline polymer(LCP) and modified poly(phenylene oxide) were prepared by drawing the melts leaving aslit die in open air. The morphology, structure and mechanical properties of the resultingstrands were studied as a function of LCP content and draw ratio. It was found that thethermal and mechanical properties of the matrix phase did not change dramatically withthe amount of LCP and draw ratio, but the orientation of LCP phase could be increasedwith draw ratio. The mechanical properties of the strands could be improved by moderatelydrawing the melts. Wide angle X-ray diffraction suggested that the improvement in tensilestrength of the strands was due to the resultant fibrillation of LCP phase and enhancedmolecular orientation. Morphological observation indicated that excessive drawing of thestrands could lead to the break down of the microfibrils of LCP and thus resulted in thedecrease of mechanical strength.     

EFFECT OF MOLECULAR WEIGHT OF PEO ON THE STRUCTURE AND PROPERTIES OF PDMAEMA/PEO HYDROGELS

A new kind of binary hydrogels composed of poly(dimethylaminoethylmethacrylate) (PDMAEMA) and poly(ethylene oxide) (PEO) with varying weight average molecular weights ((M)w = 5 × 104, 1 × 105 and 2.5 × 106) were prepared by y-irradiation technology. The properties of PDMAEMA/PEO hydrogels obtained were evaluated in terms of gel fraction, gel strength, thermal characterization and swelling behavior. The gel strength and swelling degree of the hydrogels could be improved obviously after adding PEO into the PDMAEMA system, while the degree of improvement decreased with increasing (M)w of PEO. The temperature sensitivity of PDMAEMA/PEO was retained only in the sample with PEO of (M)w = 5 × 104, and the pH sensitivity was retained in samples with PEO of (M)w = 5 × 104 and 1 × 105. When DMAEMA/PEO mixtures containing PEO of (M)w = 5 × 104 were irradiated, the main reaction could be the cross-linking of DMAEMA, and the linear PEO molecular chains could penetrate into the cross-linked network of PDMAEMA. With increasing Mw of PEO, some side reactions were induced, such as grafting of DMAEMA onto PEO molecules, the scission or cross-linking of PEO.     

PREPARATION OF NANOMETER TiO2 ORGANIC SOLUTION —EFFECT OF ORGANIC SILOXANE ON SOL PROPERTIES*

A homogeneous longtime stabilized transparent nanometer TiO2 organic solution was obtained by means of the simultaneous hydrolysis and co-polycodensation of tetrabutyltitanate (TBT) and methacryloxypropyltrimethoxysilane (MAPTMS) by the sol-gel process. The particle size of nanometer titanium dioxide was controlled by use of bifunctional silanes, such as diphenyldimethoxysilane (DPDMS), diphenyldiethoxysilane (DPDES) and dimethyldiethoxysilane (DMDES). The effect of TiO2 content in the solution on the refractive index of system was discussed in detail. The result shows that the refractive index of solution increases linearly with TiO2 content. The refractive index of the three hybrid nanometer materials attained 1.6053, 1.5846 and 1.5346, respectively. The size of nanometer particles was characterized by TEM and the particle diameter thus obtained is in the range of 20-90 nm. FT-IR spectra of the materials show that the TiO-Si bond is formed.     

STUDIES ON THE MECHANICAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF POLYETHYLENE COMPOSITES

The effects of inter facial modifier on the mechanical, dynamic mechanical properties andcrystallization behavior of the polyethylene composites were investigated in the present paper.It was found that the interfacial modifer significantly improved the mechanical properties,influenced the dynamic mechanical spectra and slightly changed the crystallization behavior.The results showed that the interfacial modifier changed the dispersion state of dispersedphase of the composites, resulting in different phase structure, which was the major reasonIeading to different mechanical and crystallization properties.     

STRUCTRE AND PROPERTIES OF COMPOSITE Ni/HARD CARBON FILMS PREPARED BY PLASMA DEPOSITION

IntroductionHardcarbonfilmsprcparcdb}'vari0usplasmaprocesscsareofc0nsidcrablcinterestbccauscofthcirunusualmcchanical-opticalandelcctricalpropertiesll~3l.Rccently,ithasReceive(IJl111c5,l9`)5;,.`,1iis()tI1ie)\tioII,1'ceil'edJtl1)'l4,l995*'I11isprojectiss[1pportcdh}tl1cNatiol1a1Nat[lntlScicl1ccI`()ul1dati()l1ofCl1il1aal1dtl1eI,aboraton'ofSolidI,ubricati()l1,l.al1/l10ulnstitutcofCl1cn1icalPh\'sics,111cChincscAcadcl11\'ofScicnccs.benfoundthattheinc0rporati0nofmetaIintocarbonfilmscangrcatl}'…     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

EFFECT 0F INTERFACIAL ADHESION ON CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLY (ETHYLENE TEREPHTHALATE)/GLASS BEAD COMPOSITES

The interfacial adhesion between poly (ethylene terephthalate) (PET) and glass beadwas investigated by scanning electron microscope and parallel-plate rheometer. Effect ofinterfacial adhesion on the crystallization and mechenical properties of PET/glass beadcomposites was also studied by differential scanning calorimeter and mechanical testers.The results obtained indicate that the glass bead has a heterogeneous nucleation effecton the PET crystallization. Although better interfacial adhesion is advantageous to theincrease of the tensile strength of the composite, yet it is unfavorable to the crystallizationof PET. It should be pointed out that the crystallization rate of filled PET is always higherthan that of pure PET, regardless of the state of interfacial adhesion.     

THE EFFECT OF POLAR ADDITIVES ON THE γ RADIATION INDUCED POLYMERIZATION OF STYRENE*

The γ induced polymerization of styrene in the presence of polar additives such as tributylphosphate, triethyl amine and ethanol was studied at dose rate of 5.0×10~(17) eV/ml. min. The re-sult shows that radiation induced polymerization of styrene was sensitized by the three kinds ofadditives at the approximate same rate and the experimental results were in agreement with thetheoretical calculation of WAS equation. The cause of sensitization is due to the proton transfer.     

STUDIES OF ACTIVE DIACYLAMIDES OF BENZOTRIAZOLE Ⅰ. SYNTHESIS OF POLYAMIDES AND POLYESTERS*

Two new routes to polyamides and polyesters were established, based on the polycondensationof new typical active diacylamide of benzotriazole, such as 1, 1'-(isophthaloyl) bisbenzotriazole(IPBBT) and 1, 1'-(terephthaloyl)bisbenzotriazole (PBBT) with diamines, diols and diphenol underdifferent mild conditions. The N-acylation of polycondensation occurred at room temperaturewithout added catalyst, the O-acylation of polycondensation had to complete in the presence oftriethylamine as a catalyst at 60℃.     

VINYL MONOMERS BEARING CHROMOPHORE MOIETIES AND THEIR POLYMERS——Ⅹ.INITIATION AND PHOTOCHEMICAL PROPERTIES OF p-(N,N-DIMETHYLAMINO)STYRENE AND ITS POLYMERS*

A vinyl monomer having an electron-donating moiety, p-(N,N-dimethylamino)styrenc (DMAS),was synthesized. It was combined with benzoyl peroxide (BPO) to form a redox initiation system to initiatethe polymerization of methyl methacrylate (MMA). UV spectra measurements show that DMAS enters thePMMA chain as well. Both DMAS and its polymer P(DMAS) display strong fluorescence, and thefluorescence can be quenched by electron-deficient compounds such as methacrylonitrile, fumaronitrile andmethyl methacrylate etc. Moreover, DMAS can also form charge transfer complex (CTC) with strongelectron acceptors such as tetracyanoethylene (TCNE). The difference between the photochemical propertiesof DMAS and P(DMAS) were explained in terms of molecular structure change and polymer conformationeffect in solution. In addition, the CTC and exciplex formation of DMAS or P(DMAS) with C_(60) were alsostudied.     

SUSPENSION-SWELLING GRAFT COPOLYMERIZATION——SYNTHESIS OF ACS RESINS*

Acrylonitrile (AN)-chlorinated polyethylene (CPE)-styrene (St) (ACS) terpolymer was synthesized by suspension-swelling graft copolymerization method, in which two key factors such as dispersing system and time were studied. Highly effective comples dispersing system was chosen and determined, and two-layer protection model was put forward to clarify the stable effect mechanism Varying the swelling time of CPE in AN and St monomer mixture, some results such as grafting effect, particle characteristics, rubber particle morphology and its size distribution, and properties of ACS resins were investigated , thus the optimum swelling time was proposed.     

SYNTHESIS OF γ-SUBSTITUTED-PROPYLCYCLOTETRASILOXANES AND THEIR EMULSION COPOLYMERIZATION WITH OCTAMETHYLCYCLOTETRASILOXANE*

Four γ-substituted-propylcyclotetrasiloxanes have been synthesized. Emulsion copolymerizations of these cyclosiloxanes with octamethylcyclotetrasiloxane have been carried out both in cationic and anionic emulsion systems. By way of these reactions, stable emulsions of organosilicon polymers which contain carbonfuctional groups such as γ-hydroxypropyl, γ-acetoxypropyl and γ-chloropropyi have been obtained.The effects of temperature, catalyst and the amount of γ-substituted-propylcyclotetrasiloxanes in emulsion copolymerizations have been studied.     

THE STUDY OF PHYCOBILIPROTEINS IN Porphyra yezoensis——THE PHYSICAL AND IMMUNO-CHEMICAL PROPERTIES OF R-PHYCOERYTHRIN~*

There are two kinds of phycoerythrin of different physical properties in Porphyra yezoensis. Their molecular weights are different. They are both composed of a-subunit and β-subunit. Their polymeric forms are (αβ)n. The absorption bands and fluorescence emission bands of the smaller molecules show hypsochromic shifts of several rims relative to that of the polymeric molecules. The isoelectric point of the former is lower than that of the latter. It is worthy of note that the smaller molecules display binding activities with guinea pig antisera. Through using radioimmunoassay, when the depression of the biuding activity of ~(125)I-insulin reaches 50%, the required quantity of the smaller molecules of R-phycoerythrin would be ca. 0.1mg, corresponding to ca. 8μ units of insulin used in a parallel experiment (26 units corresponding to 1 mg of insulin).