Effect of extended storage on the mechanical properties of reinforced plastics

The effect of storage time (6–10 years) on the mechanical properties of KAST-V glass laminate, textolite, and SVAM glass-reinforced plastic has been experimentally investigated.Moscow Lomonosov State University. Translated from Mekhanika Polimerov, No. 3, pp. 556–558, May–June, 1969.     

Some mechanical properties of film-reinforced plastics

Model cylindrical shells have been wound from glass and Dacron (Mylar) film strip in accordance with a technique developed by the authors. A layer of glass-reinforced plastic, oriented in the direction of the circumferential tensile stresses, was applied to the outer cylindrical surface of the shells. Certain mechanical properties of the film plastics and their ability to cooperate with the glass-reinforced plastic outer layer were investigated by subjecting the shells to internal liquid pressure. The possibility of obtaining impermeable shells, equally strong in the axial and circumferential directions, was confirmed.Bauman Moscow Higher Technical College. Translated from Mekhanika Polimerov, No. 1, pp. 135–139, January–February, 1971.     

Structural-statistical analysis of the strain properties of laminated reinforced plastics

Conclusion The structural relations derived here make it possible to analytically predict the main statistical characteristics of the strain properties of an LRP with allowance for the mutual correlation of the random parameters of the structure. Use of the proposed relations is valid for studying combination loading (bending and a plane stress state), as well as when the structure of the composite is unbalanced. We evaluated the scale effect associated with the presence of multiple layers and determined the impact of this effect on the scatter of the strain properties of the LRP for different types of deformation. We also proposed a method of determining the actual statistical characteristics of layers indirectly — on the basis of experimental testing of multilayered unidirectional plastics. One promising prospect is the use of these results to formulate and solve problems involving optimization of the structure of LRP's on the basis of criteria ensuring the composite's reliability and dimensional stability. Finally, the results can also serve as a basis for establishing scientifically substantiated safety factors for stiffness.Translated from Mekhanika Kompozitnykh Materialov, No. 6, pp. 995–1001, November–December, 1990.     

Anisotropy of the elastic and strength properties of reinforced plastics

The method and results of experimental investigation of anisotropy of the elastic and strength properties of reinforced plastics are discussed. A method of determining the mechanical characteristics in different directions on tubular test pieces is proposed. A special testing machine is described. It is shown that determining the strength and elastic properties of reinforced materials in directions other than the directions of reinforcing on flat test pieces cut mechanically leads to distorted results.Mekhanika Polimerov, Vol. 3, No. 3, pp. 461–466, 1967     

Region of linearity of the deformation properties of contact-molded glass-reinforced plastic

A study was made of the creep and recovery of contact-molded glass-reinforced plastic in different directions in the plane of the sheet in uniaxial tension. On the basis of experimental data, the region of linearity of the deformation properties of the material under investigation was established. The influence functions in the relations of the theory of viscoelasticity were taken in the form proposed by Bronskii. The dependence of the parameters which determine these functions on direction was investigated. It is shown that, in practice, this dependence is inherent in only one of the parameters, and a relationship which is in satisfactory agreement with the experimental results is proposed to describe it.Moscow Institute of Chemical Machine Building. Scientific-Research Institute for Mechanics, M. V. Lomonosov State University, Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 404–410, May–June, 1970.     

Statistical characteristics of the mechanical properties of glass-reinforced plastics

A statistical analysis has been made of experimental data on the mechanical properties of a glass-reinforced plastic based on T₁ glass fabric (Soviet standard GOST 8481-61) and IF-ÉD-6 epoxy resin (Elektroizolit Plant, tech. spec. TU 26-59) obtained by testing specimens cut from the waste of wound cylindrical shells. The data obtained can be used for estimating the mechanical reliability of products composed of glass-reinforced plastics of this type.Moscow. Translated from Mekhanika Polimerov, No. 1, pp. 131–134, January–February, 1971.     

Study of the deformation properties of certain elastic reinforced plastics films

The author describes the results of an experimental study of the stress-strain relationship in elastic plastics films reinforced with kapron (nylon 6) mesh and tested in uniaxial and biaxial tension.Mekhanika Polimerov, Vol. 2, No. 1, pp. 43–51, 1966     

Effect of temperature on the mechanical characteristics of carbon plastics reinforced with metal mesh

The behavior of carbon plastics based on FN resin and FN plus rubber and reinforced with metal mesh is investigated over a broad range of temperatures in tension, compression, and pure bending. The presence of a rubbery component considerably reduces the strength of the plastic while improving its deformation properties.Dnepropetrovsk State University. Translated from Mekhanika Polimerov, No. 2, pp. 358–361, March–April, 1971.     

Effect of hydrostatic pressure on mechanical properties of plastics

The effect of hydrostatic pressure on the elastic and strength properties of plastics is investigated. Hydrostatic pressure is found to raise the modulus of elasticity, the tensile strength, and the elastic limit. Approximate equations for calculating the strength and elastic properties under various amounts of hydrostatic presure are proposed.Mekhanika polimerov, Vol. 1, No. 1, pp. 65–75, 1965     

Effect of curvature of the fibers on the elastic properties of unidirectionally reinforced plastics

An approximate method is proposed for determining the reduced elastic constants of reinforced plastics (glass-reinforced plastics) with allowance for the curvature of the reinforcing fibers. All the conclusions relate to plane stress. The results of model tests are presented as confirmation of the theoretical conclusions.Mekhanika Polimerov, Vol. 3, No. 5, pp. 858–863, 1967     

Structural stresses in reinforced plastics

The safety parameters at any given point of a microinhomogeneous medium simulating the structure and properties of reinforced plastics are determined by solving the statistical boundary value problem. The results are illustrated in relation to randomly reinforced glass laminates.Mekhanika Polimerov, Vol. 3, No. 3, pp. 413–420, 1967     

Effect of surface modification on the adhesion and mechanical properties of glass-reinforced plastics

The adhesion of an epoxy-polyester resin to glass fibers with clean and modified surfaces has been determined. The effect of this adhesion on some of the properties of glass-reinforced plastics (bending, tension, shear) is investigated.Mekhanika polimerov, Vol. 1, No. 1, pp. 93–99, 1965     

Structural theory of the strength of reinforced plastics

Conclusions In the present study, we developed structural criteria that make it possible to predict at the component level (polymer binder, fibers) and interface level the long-term strength of laminated reinforced plastics in a plane stress state. The proposed relations make it possible to evaluate the effect of the rheological properties of the components, their volume fractions, and the geometry of the structure of the laminated packet on the long-term strength of reinforced plastics. The relations also permit resolution of the inverse problem: efficiently design the structure of such materials for specific loading conditions.Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 833–839, September–October, 1989.     

Effect of stability of the structural parameters of laminated reinforced plastics on their strength properties

Conclusion As a result of the completed analysis, we estimated the effect of scatter of the strength properties of the layers, instability of the layers' strain properties, and instability of the geometry of the structure on the strength properties of multidirectional LRP's in a plane stress state. It was established that instability of the structural parameters produces two negative tendencies: a reduction in the mean values of LRP strength and an increase in their scatter. From the viewpoint of ensuring the reliability of structures (structural elements) made of such materials, these tendencies reinforce one another and are thus even more dangerous. It follows from this that the production method employed should not only (or not even mainly) solve the problem of increasing the values of the parameters of the materials (and their semifinished structural elements), it should also address the problem of alleviating their instability — improving the quality of production.The numerical analysis established the limits at which it is necessary to account for instability of structural parameters in engineering calculations: for the strain properties of the layers — a coefficient of variation of the elastic modulus greater than 10%; for the scatter of the angles of orientation of the layers — a standard deviation greater than 5 °. These numerical results and the computer program developed may prove useful in evaluating the actual properties of structural parameters determined in indirect tests of LRP's, as well as in more adequately comparing empirical data with corresponding calculations based on structural theories. The development of such an approach to analyzing the strength properties of multidirectional LRP's in bending also holds promise.Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 659–666, July–August, 1990.     

Elastic constants of randomly reinforced plastics

A previously developed [4] general method of solving the nonlinear (in the statistical sense) boundary value problem of the theory of elasticity is used to determine the macroscopic moduli of elasticity of randomly reinforced plastics whose structure is simulated by a two-phase microinhomogeneous medium. The macroscopic modulus is represented in the form of a series composed of the sum of the mean value of the modulus and a sequence of corrections that take into account the central moments of the distribution of elastic constants. The limits of convergence of this series are established. The values of the macroscopic moduli for a glass-reinforced plastic obtained by calculation are compared with the experimental data.Mekhanika Polimerov, Vol. 3, No. 2, pp. 259–265, 1967