Liquid — Liquid extraction of silver(I) by diphenyl-2-pyridylmethane in benzene from aqueous mineral acid — Thiocyanate solutions

Liquid — liquid extraction of Ag(I) by diphenyl-2-pyridylmethane (DPPM) in benzene from aqueous nitric and sulfuric acid solutions containing thiocyanate ions has been studied at ambient temperature (24±2 °C). The metal is extracted quantitatively from 0.01M HNO₃+0.02M KSCN; or 0.25M H₂SO₄+0.02M KSCN by 0.1M DPPM (optimum extraction conditions). Slope analysis indicates that two types of ion-pair complexes i.e. [(DPPMH)⁺·Ag(SCN) ₂ ^– ] and [(DPPMH) ₂ ⁺ ·Ag(SCN) ₃ ^2– ] are involved in the extraction process. Separation factors determined at optimum conditions reveal the separation of Ag(I) from Cs(I), Br(I), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Fe(III), Au(III) (from HNO₃ solution only), Cr(III), Hf(IV), Ta(V), Sn(IV) and Cr(VI). With the exception of thiosulfate, other complexing anions like ascorbate, acetate, citrate, oxalate do not hinder the extraction of Ag(I) under optimum conditions.     

Diphenyl(2-pyridyl)methane as a solvent for thiocyanate complexes of zinc in aqueous mineral acids

Summary Tracer (10^–8 M) zinc can be quantitatively extracted with 0.1M diphenyl(2-pyridyl)methane (DPPM) in benzene from neutral and acidic aqueous thiocyanate solutions in a single extraction. In all cases, extraction times of 1–5 min are sufficient for equilibration. The effects of the concentration of the mineral acids, the reagent, complexing and salting-out agents and phase-volume ratios on the metal extraction are reported. The metal is predominantly extracted through solvation, and the extraction of the metal as Zn(SCN)₂(DPPM)₂ is indicated. Among the common salts only sodium chloride exerts a slight depressing effect on extraction when present in high concentration. The metal can be stripped from the organic phase with aqueous oxalate, citrate or acetate solutions in a single operation. Distribution coefficients and separation factors for a number of metal ions, relative to zinc, are reported for 0.2M potassium thiocyanate media that contain the optimal concentration of mineral acid. The method can be employed for the simultaneous preconcentration of toxic metals such as zinc, copper and mercury from neutral aqueous solution in water pollution studies.

---

Diphenyl(2-pyridyl)methan als Lösungsmittel für Zink-Rhodanidkomplexe in wäßrigen Mineralsäuren

Zusammenfassung Zinkspuren (10^–8 M) lassen sich mit einer benzolischen, 0,1 M Lösung von Diphenyl(2-pyridyl)methan (DPPM) aus neutralen oder sauren, wäßrigen Rhodanidlösungen durch eine einzige Extraktion ausschütteln. Jedenfalls sind 1–5 min hinreichend für die Einstellung des Gleichgewichtes. Der Einfluß der Konzentration der Mineralsäure, des Reagens, des Komplexbildners und des Aussalzmittels sowie des Volumenverhältnisses der Phasen auf die Metallextraktion wurde beschrieben. Die Extraktion erfolgt vorherrschend durch Solvatation und zwar als Zn(SCN)₂(DPPM)₂. Unter den gewöhnlichen Salzen beeinträchtigt nur NaCl in hoher Konzentration die Extraktion in geringem Maß. Das Metall kann aus der organischen Phase mit wäßrigen Oxalat-, Citrat- oder Acetatlösungen in einem Arbeitsgang rückextrahiert werden. Die Verteilungskoeffizienten und Trennungsfaktoren für einige Metallionen in bezug auf Zink in 0,2M Kaliumrhodanid bei optimaler Mineralsäurekonzentration wurden angegeben. Das Verfahren eignet sich für die gleichzeitige Anreicherung toxischer Metalle, wie Zn, Cu und Hg aus neutraler Lösung bei der Untersuchung der Gewässerverunreinigung.

     

Solvation of cobalt-thiocyanate complexes by 2-hexylpyridine from aqueous mineral acid solutions

A study of the distribution of cobalt between mineral acid solutions containing potassium thiocyanate and 0.1M 2-hexylpyridine in benzene has been undertaken. Cobalt can be quantitatively extracted as its thiocyanate complex from very dilute acid solutions containing 0.1–1M KSCN. Variation of the distribution coefficient D_Co in terms of the ligand concentration in the organic phase has allowed the formula of the extracted species to be determined as Co(HPy)₄ (SCN)₂. The effects of oxalate, acetate, fluoride, ascorbate, sulphate and thiosulphate ions on the extraction of cobalt from three mineral acid solutions have been reported. The extraction coefficients of several elements are given for the 0.1M 2-hexylpyridine in three systems containing 0.5M KSCN with 0.25M HNO₃, 0.05M HCl and 0.05M H₂SO₄ respectively; and their factors for separation from cobalt are estimated.     

Liquid-liquid partition of cobalt between trilaurylamine N-oxide and aqueous thiocyanate solutions

In an attempt to gain an understanding of factors affecting the extraction of cobalt by trilaurylamine oxide, the equilibria between HX+SCN^– (where X=NO ₃ ^– , Cl^–, SO ₄ ^2– ) and benzene solutions of trilaurylamine oxide have been studied. Cobalt is quantitatively extracted by the oxide from aqueous 0.01–1M KSCN in 0.01M concentration of the acids. The extraction mechanism and the possible compositions of the extracted species are discussed. The effect of several anions on the extraction of the element from optimal aqueous solutions are reported and separation factors for a number of metal ions are given. The solvent has a potential for the group preconcentration of toxic metal ions from dilute aqueous solutions.     

Spectrophotometric Determination of Thorium with Disodium Salt of Arsenazo-III in Perchloric Acid

A rapid and sensitive spectrophotometric method has been developed for the determination of thorium using 0.04% Arsenazo-III in a 2M perchloric acid solution. Absorbance was measured in 1 cm cell and the complex has a sensitive absorption peak at 654 nm. The complex is formed instantly in perchloric acid and remains stable for 45 minutes with constant absorbance. Beer's law is obeyed in the range 1–60 g·g^–1 of thorium concentration with a molar absorptivity at 654 nm = 3.07·10⁵ M^–1·cm^–1 at 24±2°C. The foreign ions interference in thorium determination have been checked. The cations were tested at >60-fold excess of thorium, Mn(II), Fe(III), Co(II) and Ni(II) interfere negatively, whereas only Ce(III) has increased the absorbance. Among the anions, cyanide, phosphate, thiocyanate and acetate at 150-fold excess of thorium cause significant interference. However, thorium can bedetermined in the presence of nitrate, chloride, oxalate, tartrate, ascorbate, thiosulphate and citrate. The method has been applied on certified reference material for thorium determination after extractive separation and the result was found in good agreement with the certified value. The method has been also applied successfully to determine thorium at g·g^–1 level in local ore samples with a precision of ±0.04%.     

Extraction of mercury(II) from aqueous thiocyanate solutions with 5-(4-pyridyl)nonane in benzene, and its subsequent atomic-absorption spectrometric determination

Tracer ( approximately 10(-8)M) mercury(II) can be quantitatively extracted with 5-(4-pyridyl)nonane in benzene from aqueous thiocyanate solutions that are up to 6M in HCl, 1M in H(2)SO(4) or 0.25M in HNO(3), in a single extraction. Optimal conditions for the extraction are given, based on a critical study of the relevant factors such as the effects of the acids, thiocyanate, salting-out and complexing agents and the reagent concentration. The mechanism underlying these extractions is discussed on the basis of the results obtained from partition and slope-analysis data. The extraction of the metal as Hg(PyN)(2)(SCN)(2) is indicated. The extracted mercury can be stripped from the non-aqueous layer with various aqueous solutions, including nitric acid (2M), sodium citrate ( 1M) and sodium thiosulphate (0.1 M). Common salts do not depress the extraction. Distribution coefficients and separation factors of several elements relative to mercury(II) are reported for media that contain the optimal concentrations of the mineral acids and are in 0.2M in potassium thiocyanate. The data have been applied for the determination of mercury in soil and water samples by atomic-absorption spectrometry.     

Extraction of thiocyanate complexes of cobalt(II) by diphenyl-2-pyridylmethane in benzene from mineral acid solutions

Extraction of Co(II) by diphenyl-2-pyridylmethane (DPPM) in benzene form mineral acid solutions containing potassium thiocyanate has been studied at room temperature (23±2°C). Its extraction from mineral acids alone is rather poor. Optimal aqueous phase composition for the quantitative extraction of Co(II) by 0.1M DPPM is 0.1M acid+0.2M KSCN. Stoichiometric studies indicate that an ionic type complex, (DPPM·H)₂·Co(SCN)₄, is responsible for extraction. The metal can be back-extracted from the organic phase by aqueous acetate, citrate or oxalate solutions. Separation factors from other metals determined under optimal conditions reveal that Co(II) can be quantitatively separated from CsI), Sr(II), Cr(III), Ln(III), Zr(IV), Hf(IV), Cr(VI) and Tc(VII), Mo(VI), Zn(II), Au(III), Hg(II) and U(VI) are, however, coextracted and hence should be previously removed by other techniques or reagents.     

Extraction separation of 86Rb from 85Sr in trace level with 18-crown-6 in nitrobenzene

A liquid-liquid extraction separation procedure has been developed for the separation of trace amounts of neutron activated rubidium and strontium from their mixture in 0.1M perchloric acid medium using 0.04M 18-crown-6 in nitrobenzene as the extractant. Separation factor for Rb/Sr was found approximately 3^.10³. Gamma-radiation stability of the extractant (up to 1.5^.10⁴ Gy) as well as that of the metal-extractant complex were examined. Complete stripping of rubidium has been achieved by 8M HCl with 3–4 fold volume increase of the aqueous phase.     

Polarographic study of the reaction between cerium(IV) and thiocyanate

Summary Polarographic studies have been made of the reaction between Cerium(IV) and potassium thiocyanate in acidic medium. Ce^IVin the concentration range 2 · 10^–4 M to 5 · 10^–3 M was found to be reduced to Ce^III by thiocyanate ion. One equivalent of thiocyanate reduced 4–6 equivalents of Ce^IV in the concentration range studied.

---

Zusammenfassung Die Reaktion zwischen Cer^IV und Kaliumthiocyanat wurde in saurem Medium polarographisch untersucht. Cer^III wurde im Bereich von 2 · 10^–4 m bis 5 · 10^–3 m von Thiocyanat zu Cer^III reduziert. In diesem Konzentrationsbereich entsprachen einem Äquivalent Thiocyanat 4–6 Äquivalente Cer^IV.

     

Extraction and separation of Zr,Nb and Hf by Aliquat 336 and its mixtures with TOPO from acidic thiocyanate media

Presence of thiocyanate ions results in appreciable extraction of Zr(IV) by Aliquat 336 from low aqueous HCl acidities, i.e., 0.1 to 4.5M. The variation of concentrations of HCl, thiocyanate and Aliquat 336 greatly influences the extent of extraction. Mixtures of Aliquat 336 and TOPO result in synergistic extraction of Zr and Hf from acidic thiocyanate media, the extracted species being the disolvate with TOPO. By controlled adjustment of HCl, SCN^– and Aliquat 336 concentrations, separation of Zr, Nb and Hf is possible. A maximum separation factor (D_Nb/D_Zr) of 3675 has been achieved under certain conditions.     

Gleichzeitige oscillopolarographische Bestimmung von Wismut und Blei in mineralischen Rohstoffen

Zusammenfassung Eine Methode zur oscillopolarographischen Bestimmung von Wismut und Blei in mineralischen Rohstoffen wurde ausgearbeitet. Die Abtrennung beider Elemente wurde in einem Arbeitsgang durch Chloroformextraktion der Diäthyldithiocarbamidate aus einer Lösung, die NatriumKaliumtartrat, Tiron, Schwarzenbachs Puffer und Kaliumcyanid enthielt, durchgeführt. Die extrahierten Elemente wurden durch Reextraktion mit 2 m Salzsäure (Pb) und 6 m Salzsäure (Bi) voneinander getrennt.Die oscillopolarographische Bestimmung von Wismut wurde in 3 m Salzsäure durchgeführt. Für Spurenkonzentrationen wurde eine Lösung von 1 m Perchlorsäure und 0,2 m Ammoniumchlorid verwendet.Blei wurde oscillopolarographisch in einer Lösung von 0,1 m Ammoniumthiocyanat, 0,25 m Hexamethylentetramin und 0,5 m Ammoniumperchlorat bestimmt. Die Methode eignet sich zur Bestimmung verhältnism äßig kleiner Mengen bis zu Spurenkonzentrationen von Wismut und Blei. Sie ist verhältnismäßig schnell, denn sie ermöglicht eine fast gleichzeitige Bestimmung beider Elemente aus einer Einwaage. Das Verfahren wurde mit Erfolg bei Erzen angewendet. Der Fehler liegt in einem Bereich von 3–5%.

---

Summary The simultaneous oscillopolarographic determination of bismuth and lead has been worked out: The separation of both elements together from interfering material is carried out by extraction with diethyldithiocarbamidate and chloroform from a medium of sodium potassium tartrate, tiron, Schwarzenbach buffer and potassium cyanide. The extracted elements are subsequently separated by re-extraction with 2 M hydrochloric acid (Pb) and 6 M hydrochloric acid (Bi). The oscillopolarographic determination of bismuth is performed in 3 M hydrochloric acid (in the case of trace concentrations a solution of 1 M perchloric acid and 0.2 M ammonium chloride is applied). For the oscillopolarographic determination of lead a solution of 0.1 M ammonium thiocyanate, 0.25 M hexamethylene-tetramine and 0.5 M ammonium perchlorate is employed. The method is suitable for the determination of low concentrations of lead and bismuth in the range of 10^–5–10^–6 M and is recommended especially for ores. The relative error is ±3–5%.

     

Comparative substoichiometric extraction of silver with potassium salts of ethyl, propyl, butyl, pentyl and benzyl xanthates

A rapid and sensitive substoichiometric radiochemical method has been developed for the comparative extraction and quantification of silver with potassium salts of ethyl, propyl, butyl, pentyl and benzyl xanthates from hydrochloric, nitric and sulfuric acid media into chloroform. The effect of 0.1–4M H⁺ ion concentration of the respective acid on the substoichiometric extraction of silver was critically studied. The efficiency of the method developed was tested by the determination of 10–100 g silver in standard solutions with an average percentage of error better than 2. The methods developed have been utilized to determine silver content in photofilm washing collected from various photostudios in Tirupati, India.     

4-(5-Nonyl)pyridine as an extractant for cobalt thiocyanate complexes from mineral acid solutions

The partition behaviour of cobalt into 4-(5-nonyl)pyridine (NPy) in benzene from aqueous hydrochloric, nitric and sulfuric acid media containing variable amounts of potassium thiocyanate is described. Cobalt is quantitatively extracted by NPy from 0.1–1M KSCN solutions at 0.01 M concentration of the mineral acids. The extraction mechanism and the possible compositions of the extracted species are discussed. The effects of foreign salts on the extraction of cobalt from three mineral acid solutions are reported. Several elements including those which are of some interest in connection with the separation of cobalt were tested for extraction from 0.01 M solutions of mineral acids 0.3 M with respect to KSCN and their factors for separation from cobalt were estimated.     

Solvent extractions of zirconium and niobium from HCl solutions by Aliquat 336/Alamine 336 and DOSO mixtures

Liquid-liquid extractions of zirconium(IV) from aqueous HCl solutions by mixtures of Aliquat 336 or Alamine 336 and diocytl sulfoxide (DOSO) in the diluent benzene has been found to be always higher than that by any single extractant. While the cationic extractants extract Zr(IV) above 6M HCl, DOSO extracts from 4M onwards. Synergism has been observed in all cases. With any of these extractants extraction becomes almost quantitative at and above 10M HCl, but with mixtures of the cationic and neutral extractants, extraction is quantitative in the range 8–9M HCl. Although the extracted species with DOSO alone seems to be ZrCl₄·DOSO, with the mixture of extractants, however, the extracted species appear to be Q₂ZrCl₆·DOSO where Q is R₃ ⁺NH (for Alamine 336) and R₃ ⁺N(CH₃) (for Aliquat 336). Studies on separation of⁹⁵Zr–⁹⁵Nb pair from aqueous HCl media by Alamine 336 or DOSO and their mixtures in benzene exhibit preferential extraction of⁹⁵Nb leaving behind⁹⁵Zr in the aqueous phase, and extractions have been found to depend both upon the extractant and HCl concentrations.     

Radiochemical studies on the extraction of arsenic(III) by trilaurylamine oxide and benzene from aqueous iodide solutions and its determination in water samples by spectrophotometry

An extraction system consisting of trilaurylamine N-oxide and benzene has been identified as a possible extractant for tracer arsenic (<10^–3 M) from hydrochloric or sulfuric acid solutions with or without iodide. Benzene alone is less efficient as an extractant for arsenic when compared with trilaurylamine oxide dissolved in benzene. The mechanism of extraction is attributed to the formation of hydrated AsCl₃, while the iodide complex is most probably AsI ₄ ^– . The role of the solvent and the other parameters affecting the extraction have been investigated. The results have been employed to determine arsenic in water samples by spectrophotometry using the molybdenum blue method. The extraction procedure was used for the analysis of 10 ml water samples containing 0.2–0.5 g of arsenic.     

Studies of radioactivity and heavy metals in phosphate fertilizer

The extraction of mercury(II) from chloride and thiocyanate solutions has been studied by tracer techniques using bis(2-ethylhexyl) sulphoxide (B2EHSO) in benzene as an extractant. These extraction data have been analyzed theoretically by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexation in the organic phase. The results demonstrate that Hg(II) is extracted as HgX₂ and HgX₂·nB2EHSO (where X=Cl^– or SCN^– andn=1 or 2). The effect of the foreign ions on the extraction of Hg(II) has also been investigated.     

Selective solvent extraction of chromium(VI) using 2-hexylpyridine

The extraction behaviour of trace and macroamounts of chromium(VI) from different mineral acid solutions by 2-hexylpyridine in chloroform has been investigated. In the chloride system, the extracted species is apparently (HPyH⁺)₂ (Cr₂O₇)²⁻ or HPy⁺(HCrO ₄ ⁻ ) for macro and trace amounts of chromium(VI), respectively. Among the common anions chloride and sulphate have little effect on extraction up to 1M concentration, while in the case of nitrate there is a continuous decrease in the extraction with the increase of salt concentration in the aqueous phase. The effect of ascorbate, acetate, citrate, oxalate, thiosulphate, thiocyanate ions on the extraction from 1M HCl was also examined. Separation factors of several elements relative to chromium(VI) have been described and the separation of chromium(IV) from a large number of elements has been achieved.     

Kinetic-Spectrophotometric Determination of Trace Quantities of Thiocyanate Based on Its Landolt Effect on the Reaction of Bromate with Hydrochloric Acid1

A new method for the rapid and sensitive determination of trace quantities of thiocyanate based on its Landolt effect on the bromate-hydrochloric acid reaction was developed. The induction period of the reaction is proportional to the SCN^– concentration. The decolorization of methyl orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. We were able to determine thiocyanate in the range 2 × 10^–7–4 × 10^–5 M by this method. The relative standard deviation for 10 determinations of 1.5 × 10^–6 M thiocyanate ion is 0.19% and the detection limit of the method was 7.00 × 10^–8 M. The method was applied to the determination of thiocyanate in human blood serum and of saliva samples with satisfactory results.     

Untersuchungen zum polarographischen Verhalten des Rheniums in perchlorsauren L?sungen

Zusammenfassung Das polarographische Verhalten des Rheniums(VII) wurde in konzentrierteren PerchlorsäureLösungen untersucht. Zur Bestimmung kleiner Rhenium(VII)-Konzentrationen ist eine 10 M Perchlorsäure geeignet. Die Bestimmung kann mit der Gleichstrom-, Wechselstrom- und differentiellen Pulse-Polarographie durchgeführt werden. Mit der Gleichstrompolarographie lassen sich noch 2·10^–8 M Re(VII) erfassen. Die Eichkurven sind im Bereich von 5·10^–8 bis 6·10^–5M linear. Die Temperatur- und Tropfzeitabhängigkeit der polarographischen Ströme macht ihren katalytisch/kinetischen Ursprung wahrscheinlich.

---

Investigations on the polarographic behaviour of rhenium in perchloric acid solutions

Summary The polarographic behaviour of rhenium(VII) was investigated in perchloric acid solutions of higher concentrations. For the polarographic determination of small concentrations of rhenium(VII) a 10 M perchloric acid is properly suited. The determination can be performed by DC-, AC- and DP-polarography. With DC-polarography 2×10^–8 M Re(VII) can be detected. The calibration curves are linear in the range from 5×10^–8 to 6×10^–5M Re(VII). From investigations of the temperature- and droptime dependence the catalytic/kinetic origin of the polarographic currents is made probable.

     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).