Adsorption of Safranin-T from wastewater using waste materials- activated carbon and activated rice husks

Textile effluents are major industrial polluters because of high color content, about 15% unfixed dyes and salts. The present paper is aimed to investigate and develop cheap adsorption methods for color removal from wastewater using waste materials activated carbon and activated rice husk-as adsorbents. The method was employed for the removal of Safranin-T and the influence of various factors such as adsorbent dose, adsorbate concentration, particle size, temperature, contact time, and pH was studied. The adsorption of the dye over both the adsorbents was found to follow Langmuir and Freundlich adsorption isotherm models. Based on these models, different useful thermodynamic parameters have been evaluated for both the adsorption processes. The adsorption of Safranin-T over activated carbon and activated rice husks follows first-order kinetics and the rate constants for the adsorption processes decrease with increase in temperature.     

Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Adsorption of dyes onto carbonaceous materials produced from coffee grounds by microwave treatment

Organic wastes have been burned for reclamation. However, they have to be recycled and reused for industrial sustainable development. Carbonaceous materials were produced from coffee grounds by microwave treatment. There are many phenolic hydroxyl and carboxyl groups on the surface of carbonaceous materials. The base consumption of the carbonaceous materials was larger than that of the commercially activated carbon. The carbonaceous materials produced from coffee grounds were applied to the adsorbates for the removal of basic dyes (methylene blue and gentian violet) in wastewater. This result indicated that the adsorption of dyes depended upon the surface polar groups on the carbonaceous materials. Moreover, the Freundlich constants of isotherms for the adsorption of methylene blue and gentian violet onto the carbonaceous materials produced from coffee grounds were greater than those for adsorption onto activated carbon or ceramic activated carbon. The interaction was greatest between the surface or porosity of the carbonaceous materials and methylene blue and gentian violet. The microwave treatment would be useful for the carbonization of organic wastes to save energy.     

The effect of chemical activation method on properties of activated carbons obtained from pine cones

A method for obtaining carbonaceous adsorbents from pine cones by chemical activation with NaOH is described. Activated carbons were obtained by two methods of activation (physical mixing and impregnation) and two variants of thermal treatment. It has been shown that pine cones can be successfully used as cheap precursor of carbonaceous adsorbents of well-developed surface area, large pore volume and good sorption properties. All activated carbon samples obtained show strongly microporous structure and surface of acidic character. The best physicochemical properties and greatest sorption capacity towards iodine were found for the carbon samples obtained by physical mixing of the precursor with the activating agent and then subjected to thermal activation at 600°C.     

碳纳米管的定向操作

由于呈现独特的一维结构特征、机械及电子性能,碳纳米管已引起广泛的兴趣,然而涉及到具体的应用就不可避免碳纳米管的定位、定向,这也已成为非常富有挑战性的课题。本文中笔者主要介绍碳纳米管定向操作的最新进展,重点介绍后生长的平面有序定向操作。     

Surface Diels-Alder reactions as an effective method to synthesize functional carbon materials

The post-synthesis chemical modification of various porous carbon materials with unsaturated organic compounds is reported. By this method, amine, alcohol, carboxylate, and sulfonic acid functional groups can be easily incorporated into the materials. Different carbonaceous materials with surface areas ranging from 240 to 1500?m(2)g(-1) and pore sizes between 3.0 and 7.0?nm have been studied. The resulting materials were analyzed by elemental analysis, nitrogen sorption, FTIR spectroscopy, zeta-potential measurements, thermogravimetric analysis, photoelectron spectroscopy, and small-angle X-ray scattering. These analyses indicated that the degree of functionalization is dependent on the nature of the dienophile (reactivity, steric hindrance) and the porosity of the carbon material. As possible applications, the functionalized carbonaceous materials were studied as catalysts in the Knoevenagel reaction and as adsorbents for Pb(2+) from aqueous solution.     

Functionalization of single layers and nanofibers: a new strategy to produce polymer nanocomposites with optimized properties

Nanocomposites are the emerging materials of the 21st century in view of their possessing design uniqueness without any compromises, certain unusual property combinations that are not found in conventional composites, as well as a wide spectrum of applications. Polymer-based layered compound nanocomposites have special place in view of their best property enhancement. Hence, the objective of this article is to bring new ideas to optimize the design of polymer/layered compounds/fibrous nanocomposites, starting with a brief overview of the preparation, structure, properties and applications. The proposed strategy suggests the use of synthetic and natural layered compounds, taking into account their ability to be exfoliated in the form of single layers, which can be chemically grafted with key molecules. The same procedure can also be applied to fibrous materials. These surface-grafted molecules can carry reactive groups to be bonded to the polymer matrices. Thus adhesion between the reinforcement and the polymer matrix can be achieved. This methodology, which has not been explored systematically in the specialized literature, can be used to produce polymer nanocomposites with low-cost fibrous materials having similarity to expensive carbon nanotubes exhibiting optimized dispersion, interfacial bonding, and attractive physical and other properties.     

Three-dimensional nanocarbon and the electrochemistry of nanocarbon/tin oxide for lithium ion batteries

In this work, the potential of using coconut shell, which is very cheap and readily available, for the production of graphitic nanocarbon three-dimensional networks is investigated. The three-dimensional carbon has been produced via the wet-impregnation of coconut shell powder with a transition metal catalyst. The novel process employed offers low costs and environmental advantages, with biological waste used in place of carbonaceous precursor as the feedstock. Nanocarbon/tin oxide composites were prepared via wet-impregnation and the solvothermal method, using tin chloride solution with the activated nanocarbon. The electrochemical performances of the three-dimensional nanocarbon doped with tin oxide and of activated nanocarbon alone as anode materials were investigated in rechargeable lithium ion batteries. One composite made by using the solvothermal method shows stable cyclic retention up to 100 cycles and delivers a high reversible capacity of about 405?mAh g^?1.     

通过密度函数理论表征炭质吸附剂的孔径分布

通过密度函数理论（DFT-DensityFunctionalTheory）对炭质吸附剂的孔径分布进行了表征。该法以多孔固体上N2吸附分子模型为依据，用一种方法对多孔固体的孔径分布从微孔到大孔范围进行确定。本文用该法对自制的聚丙烯腈活性炭纤维、国产煤质活性炭及日本产活性炭微球等六种炭质吸附剂的孔径分布进行了表征。     

Surface Diels–Alder Reactions as an Effective Method to Synthesize Functional Carbon Materials

The post‐synthesis chemical modification of various porous carbon materials with unsaturated organic compounds is reported. By this method, amine, alcohol, carboxylate, and sulfonic acid functional groups can be easily incorporated into the materials. Different carbonaceous materials with surface areas ranging from 240 to 1500 m² g^?1 and pore sizes between 3.0 and 7.0 nm have been studied. The resulting materials were analyzed by elemental analysis, nitrogen sorption, FTIR spectroscopy, zeta‐potential measurements, thermogravimetric analysis, photoelectron spectroscopy, and small‐angle X‐ray scattering. These analyses indicated that the degree of functionalization is dependent on the nature of the dienophile (reactivity, steric hindrance) and the porosity of the carbon material. As possible applications, the functionalized carbonaceous materials were studied as catalysts in the Knoevenagel reaction and as adsorbents for Pb²⁺ from aqueous solution.     

基于纤维素的先进功能材料（专题报道）

 收集整理了近几年间发表在国内外重要期刊上的约360篇文献,以纤维素功能材料的制备方法为线索,简要综述了该领域的最新进展,对纤维素基纤维材料、膜材料、光电材料、杂化材料、智能材料、生物医用材料等功能材料的制备过程、功能和应用前景做了概括性描述.     

Aligned Nanotubes

Since the discovery of carbon nanotubes by Iijima in 1991, various carbon nanotubes with either a single‐ or multilayered graphene cylinder(s) have been produced, along with their noncarbon counterparts (for example, inorganic and polymer nanotubes). These nanostructured materials often possess size‐dependent properties and show new phenomena related to the nanosize confinement of the charge carriers inside, which leads to the possibility of developing new materials with useful properties and advanced devices with desirable features for a wide range of applications. In particular, carbon nanotubes have been shown to exhibit superior properties attractive for various potential applications, ranging from their use as novel electron emitters in flat‐panel displays to electrodes in electrochemical sensors. For many of the applications, it is highly desirable to have aligned/patterned forms of carbon nanotubes so that their structure/property can be easily assessed and so that they can be effectively incorporated into devices. In this Review, we present an overview on the development of aligned and micropatterned nanotubes, with an emphasis on carbon nanotubes.     

《碳纳米材料电化学》专辑序言 ——方兴未艾的电化学能量转换和存储先进材料和技术

可以预见,在相当一段时期内,能源和环境将是全球发展的两大主题. 其实,人类对能源的获取方式将对地球的生态环境和人类未来的生存状态和生活方式产生重要影响. 正因为如此,世界各国正在大力发展可再生能源和清洁能源. 电化学能源是将化学能高效转变为电能的一种能量转换方式,它历史悠久,但不断被改进和创新,尤其是近年来得到了较快的发展. 目前,电化学能源转换和存储器件主要包括一次电池（如锌锰电池等）、二次电池（如铅酸电池、镍氢电池、锂离子电池等）、燃料电池、金属-空气电池以及超级电容器等. 电化学能源和其它可再生能源相互补充、交叉利用将是未来清洁能源的主要发展方向.     

Electrochemical Sensors Based on Carbon Nanotubes

Carbon nanotubes are attractive new materials. It has been about a decade since carbon nanotubes were discovered. Carbon nanotubes have many outstanding properties and have many practical or potential applications. In this short review we introduce recent advances in carbon nanotubes as potential material for electrochemical sensors. The advantages of carbon nanotubes as sensors are discussed along with future prospects.     

预嵌锂硬碳和软碳用于锂离子电容器负极的比较研究

锂离子电容器是一种应用前景广阔的电化学储能器件. 目前,活性炭作为锂离子电容器正极被广泛使用. 然而,锂离子电容器负极却有多种不同选择,如硬碳和软碳等碳材料. 本文使用两种具有不同结构和电化学特性的硬碳和软碳材料作为锂离子电容器负极,进行了对比研究. 研究表明,软碳相比于硬碳有更好的电子导电性和更高的可逆容量. 通过在电流范围0.1 ~ 12 A·g^-1下进行充放电测试,分别研究了两种碳基电极在不同涂覆厚度下的倍率性能. 结果显示,硬碳电极在大电流下有更好的倍率特性. 然后,以活性炭为正极,预嵌锂的硬碳和软碳为负极,锂片为锂源和参比电极,分别组装了三电极软包锂离子电容器. 根据三电极充放电测试,分别研究了不同预嵌锂量的硬碳和软碳所组装的锂离子电容器的电化学性能. 结果表明,合适的负极预嵌锂容量可以提升锂电容的能量密度、功率密度和循环稳定性. 最后,大容量硬碳和软碳基软包锂离子电容器被分别组装,软碳基锂电容实现了最高的能量密度21.2 Wh·kg^-1（基于整个器件质量）,硬碳基锂电容实现最高的功率密度5.1 kW·kg^-1.     

Studies on defluoridation of water

Several materials including aluminium salts, calcined alumina, magnesia, lime, activated carbon, sulphonated carbonaceous materials and ion-exchange resins have been screened for their utility in defluoridation of water. Aluminium impregnated cation exchange resins and sulphonated carbonaceous materials, prepared from coconut shell, paddy husk have been found to have a significant defluoridation capacity. Filter alum (aluminium sulphate) solution is also found efficacious. On the basis of results of extensive investigations, a simple and economical domestic defluoridation process has been evolved. The process consists of mixing raw water with required quantity of saturated filter alum solution. Addition of some coagulant aids is found to hasten sedimentation of floccules.     

Adsorption of SO2 by typical carbonaceous material: a comparative study of carbon nanotubes and activated carbons

Applying activated carbons for SO₂ adsorption and conversion to H₂SO₄, as a dry process, has been considered the development direction of desulfurization technology. Coal-based activated carbon, coconut shell activated carbon, single wall carbon nanotube and multi-wall carbon nanotubes were used as typical carbonaceous materials to study the SO₂ adsorption mechanism. SEM, N₂ adsorption, XPS and fixed-bed reaction system were employed to study the morphology, pore structure, surface functional groups and SO₂ adsorption behaviors of the four adsorbents. The fixed-bed experiment was carried out at normal pressure and SO₂ concentration was set 1,000 ppm. According to SEM and N₂ adsorption results, hierarchical pore structure was an important characteristic of activated carbon. Aggregation was an important characteristic of CNTs. Mesopores and macropores took the dominance of pore structure in CNTs. According the SO₂ adsorption data and correlation analysis, it can be concluded that the dominant adsorption type on activated carbons does not alter with adsorption temperature changing. However, the adsorption type of SO₂ adsorption on CNTs changes with adsorption temperature varying. With adsorption temperature increasing, the dominant adsorption type transforms to chemisorption by physisorption. Higher-density π–π* in carbon nanotubes may be the active sites for the SO₂ chemical adsorption. Micropores with the diameter smaller than 0.7 nm were the best SO₂ adsorption place for both activated carbons and carbon nanotubes. The results provided a profound insight into the microstructure and SO₂ adsorption mechanism of the two kinds of carbonaceous materials.     

稻壳多孔碳材料的电容性能及模型计算

采用NaOH和H₃PO₄化学活化法, 由廉价的稻壳制备了2种高比表面积的介孔活性碳, 测试了其比表面积和平均孔径, 利用循环伏安、 恒流充放电和交流阻抗测试了其电化学性能, 其比电容分别达到145.8和168.5 F/g. 利用一种多分支的三级孔道模型对其进行交流阻抗谱拟合, 拟合结果符合度较高, 表明该模型对分析活性碳电极结构有一定指导意义.     

Amide-Functionalized Porous Carbonaceous Anode Materials for Lithium-Ion Batteries

Porous carbonaceous anode materials have received considerable attention as an alternative anode material, however, there is a critical bottleneck as it suffers from a large irreversible specific capacity loss over several initial cycles owing to undesired surface reactions. In order to suppress undesired surface reactions of porous carbonaceous anode material, here, we suggest a simple and convenient two-step surface modification approach that allows the embedding of an amide functional group on the surface of a porous carbonaceous anode, which effectively improves the surface stability. In this approach, the porous carbonaceous anode material is firstly activated by means of strong acid treatment comprising a combination of H₂SO₄ and HNO₃, and it is subjected to further modification by means of an amide coupling reaction. Our additional systematic analyses confirm that the acid functional group effectively transforms into the amide functional group. The resulting amide-functionalized porous carbon exhibits an improved electrochemical performance: the initial discharge specific capacity is greatly reduced to less than 2,620 mA h g⁻¹ and charge specific capacity is well still remained, indicating stabling cycling performance of the cell.