The Significance of Interfacial Water Structure in Soluble Salt Flotation Systems

Flotation of soluble salts with dodecyl amine hydrochloride (DAH) and sodium dodecyl sulfate (SDS) collectors has demonstrated that the interfacial water structure and hydration states of soluble salt surfaces together with the precipitation tendency of the corresponding collector salts are of considerable importance in explaining their flotation behavior. In particular, the high concentration of ions in these soluble salt brines and their hydration appear to modify the bulk and interfacial structure of water as revealed by contact angle measurements and this effect is shown to be an important feature in the flotation chemistry of soluble salt minerals including alkali halide and alkali oxyanion salts. Depending on characteristic chemical features (salt type), the salt can serve either as a structure maker, in which intermolecular hydrogen bonding between water molecules is facilitated, or as a structure breaker, in which intermolecular hydrogen bonding between water molecules is disrupted. For structure making salts the brine completely wets the salt surface and no contact angle can be measured. For structure breaking salts the brine does not completely wet the salt surface and a finite contact angle is measured. In this regard it has been found that soluble salt flotation either with the cationic DAH or anionic SDS collector is possible only if the salt is a structure breaker. Copyright 2001 Academic Press.     

Molecular features of the air/carbonate solution interface

The nature of the air/carbonate solution interface is considered with respect to water structure by sum-frequency vibrational spectroscopy (SFVS) and molecular dynamics simulations (MDS). Results from this study provide further understating regarding previous observations that the surface tensions of structure making sodium carbonate solutions have been shown to be significantly greater than the surface tensions of structure breaking bicarbonate solutions at equivalent concentrations. This difference in surface tension and its variation with salt concentration is related to the organization of water and ions at the air/solution interface. Spectral results from SFVS show at equivalent concentrations that, for the carbonate solution, the strong water structure signal of 3200 cm(-1) at the air/carbonate solution interface is increased by a factor of 4 when compared to the same signal for the air/bicarbonate solution interface, which spectrum is weaker than the spectrum for the air/water interface in the absence of salt. These results from SFVS are explained by the results from MDS which show that in the case of carbonate solutions the structure making carbonate ions are excluded from the interfacial water region which region is extended in depth. On the other hand, in the case of bicarbonate solutions, the bicarbonate ions are accommodated in the interfacial water region and there is no evidence of an increase in the extent of water structure. These SFVS experimental and MD simulation results provide further information to understand interfacial phenomena of soluble salts at the molecular level.     

Water structure and its influence on the flotation of carbonate and bicarbonate salts

Interfacial water structure is a most important parameter that influences the collector adsorption by salt minerals such as borax, potash and trona. According to previous studies, salts can be classified as water structure makers and water structure breakers. Water structure making and breaking properties of salt minerals in their saturated brine solutions are essential to explain their flotation behavior. In this work, water structure making-breaking studies in solutions of carbonate and bicarbonate salts (Na(2)CO(3), K(2)CO(3), NaHCO(3) and NH(4)HCO(3)) in 4 wt% D(2)O in H(2)O mixtures have been performed by FTIR analysis of the OD stretching band. This method reveals a microscopic picture of the water structure making/breaking character of the salts in terms of the hydrogen bonding between the water molecules in solution. The results from the vibrational spectroscopic studies demonstrate that carbonate salts (Na(2)CO(3) and K(2)CO(3)) act as strong structure makers, whereas bicarbonate salts (NaHCO(3) and NH(4)HCO(3)) act as weak structure makers. In addition, the changes in the OD band parameters of carbonate and bicarbonate salt solutions are in agreement with the viscosity characteristics of their solutions.     

Hofmeister effects in surface tension of aqueous electrolyte solution

The surface tension of electrolyte solutions shows marked specific ion effects. We here show an important role for both ionic solvation energies and ionic dispersion potentials in determining this ion specific surface tension of salt solutions. The ion self-free energy changes when an ion moves from bulk solution into the interfacial region, with its decreasing water density profile. We will show that the solvation energies of different ions correlate very well with the surface tension of salt solutions. Inclusion of this distance-dependent self-free energy contribution brings qualitative agreement with experiments and the right Hofmeister series. This is so not only for surface tension changes but also for measured surface potentials. The inclusion of ionic dispersion interaction potentials further improves the agreement with experiments. We discuss how further progress in the theory of the surface tension of salts can be achieved.     

Interface tension of silica hydroxylated nanoparticle with brine: a combined experimental and molecular dynamics study

We have used molecular dynamics simulations to calculate the interfacial tension of hydroxylated SiO(2) nanoparticles under different temperatures and solutions (helium and brine with monovalent and divalent salts). In order to benchmark the atomistic model, quartz SiO(2) interfacial tension was measured based on inverse gas chromatography under He atmosphere. The experimental interfacial tension values for quartz were found between 0.512 and 0.617 N/m. Our calculated results for the interfacial tension of silica nanoparticles within helium atmosphere was 0.676 N/m, which is higher than the value found for the system containing He∕α-quartz (0.478 N/m), but it is similar to the one found for amorphous silica surface. We have also studied the interfacial tension of the nanoparticles in electrolyte aqueous solution for different types and salts concentrations (NaCl, CaCl(2), and MgCl(2)). Our calculations indicate that adsorption properties and salt solutions greatly influence the interfacial tension in an order of CaCl(2) > MgCl(2) > NaCl. This effect is due to the difference in distribution of ions in solution, which modifies the hydration and electrostatic potential of those ions near the nanoparticle.     

Molecular dynamics simulations of the solution-air interface of aqueous sodium nitrate

Molecular dynamics simulations have been used to investigate the behavior of aqueous sodium nitrate in interfacial environments. Polarizable potentials for the water molecules and the nitrate ion in solution were employed. Calculated surface tension data at several concentrations are in good agreement with measured surface tension data. The surface potential of NaNO3 solutions at two concentrations also compare favorably with experimental measurements. Density profiles suggest that NO3- resides primarily below the surface of the solutions over a wide range of concentrations. When the nitrate anions approach the surface of the solution, they are significantly undercoordinated compared to in the bulk, and this may be important for reactions where solvent cage effects play a role such as photochemical processes. Surface water orientation is perturbed by the presence of nitrate ions, and this has implications for experimental studies that probe interfacial water orientation. Nitrate ions near the surface also have a preferred orientation that places the oxygen atoms in the plane of the interface.     

Increased interfacial thickness of the NaF, NaCl and NaBr salt aqueous solutions probed with non-resonant surface second harmonic generation (SHG)

Specific ion effects on the nonlinear optical response from the water molecules at the air/sodium halide solution interfaces are measured using non-resonant surface second harmonic generation (SHG). Procedures have been developed to monitor and remove the impurities in the salt solution samples to ensure measurement of small changes in the SHG signal. Quantitative polarization analysis of the measured SHG data indicated that the average orientation of the interfacial water molecules changed only slightly around 40 degrees with the increase of the bulk concentration of the three sodium halides, namely NaF, NaCl and NaBr, from that of the neat air/water interface. The observed significant SHG signal increase with the bulk salt concentration is attributed to the overall increase of the thickness of the interfacial water molecular layer, following the order of NaBr > NaCl approximately NaF. The absence of the electric-field-induced SHG (EFISHG) effect indicated that the electric double layer at the salt aqueous solution interface is much weaker than that predicted from the molecular dynamics (MD) simulations. These results provided quantitative data to the specific anion effects on the interfacial water molecules of the electrolyte aqueous solution, not only for the larger and more polarizable Br(-) anion, but also for the smaller and less polarizable F(-) and Cl(-) anions.     

Thermodynamic study of interfacial tension between oil and aqueous phases composed of ionic liquids and brine

The first fundamental step in determining the physicochemical properties of an equilibrium system is to determine the activity coefficient of electrolyte and non-electrolyte ions. Based on understanding the importance of activity coefficient in thermodynamic systems in this study, in order to predict interfacial tension between oil and aqueous phases composed of ionic liquids and brine, a modified thermodynamic equation based on concentration and coefficient of activity of ionic liquids is defined. For this study, the Extended UNIQUAC model is desired and its adjustable parameters are optimized with Genetic + PSO algorithm. The modified model has practical features such as investigating the effect of concentrations of salts in the water of oil fields formation on the interfacial tension of the system, investigating the effect of concentrations of various organic compounds such as ionic liquids on the interfacial tension of the system and investigating the interaction energy between organic and inorganic ions. In this study, the optimization of the modified thermodynamic equation to predict the interfacial tension of solutions containing [C₈Py][Cl], [C₁₈Py][Cl], [C₁₂mim][Cl] and [C₁₈mim][Cl] with the presence of brine and distilled water is investigated. Also, the effect of ionic strength of the solution in 32 equilibrium systems on interfacial tension is investigated. According to the optimization results of this study, the design of a computer program can be considered to predict the interfacial tension with the presence of ionic liquids and salts.     

A concise review of nanoscopic aspects of bioleaching bacteria–mineral interactions

Bioleaching is a technology for the recovery of metals from minerals by means of microorganisms, which accelerate the oxidative dissolution of the mineral by regenerating ferric ions. Bioleaching processes take place at the interface of bacteria, sulfide mineral and leaching solution. The fundamental forces between a bioleaching bacterium and mineral surface are central to understanding the intricacies of interfacial phenomena, such as bacterial adhesion or detachment from minerals and the mineral dissolution. This review focuses on the current state of knowledge in the colloidal aspect of bacteria–mineral interactions, particularly for bioleaching bacteria. Special consideration is given to the microscopic structure of bacterial cells and the atomic force microscopy technique used in the quantification of fundamental interaction forces at nanoscale.     

Unified molecular picture of the surfaces of aqueous acid, base, and salt solutions

The molecular structure of the interfacial regions of aqueous electrolytes is poorly understood, despite its crucial importance in many biological, technological, and atmospheric processes. A long-term controversy pertains between the standard picture of an ion-free surface layer and the strongly ion specific behavior indicating in many cases significant propensities of simple inorganic ions for the interface. Here, we present a unified and consistent view of the structure of the air/solution interface of aqueous electrolytes containing monovalent inorganic ions. Molecular dynamics calculations show that in salt solutions and bases the positively charged ions, such as alkali cations, are repelled from the interface, whereas the anions, such as halides or hydroxide, exhibit a varying surface propensity, correlated primarily with the ion polarizability and size. The behavior of acids is different due to a significant propensity of hydronium cations for the air/solution interface. Therefore, both cations and anions exhibit enhanced concentrations at the surface and, consequently, these acids (unlike bases and salts) reduce the surface tension of water. The results of the simulations are supported by surface selective nonlinear vibrational spectroscopy, which reveals among other things that the hydronium cations are present at the air/solution interface. The ion specific propensities for the air/solution interface have important implications for a whole range of heterogeneous physical and chemical processes, including atmospheric chemistry of aerosols, corrosion processes, and bubble coalescence.     

Air-liquid interfaces of aqueous solutions containing ammonium and sulfate: spectroscopic and molecular dynamics studies

Investigations of the air-liquid interface of aqueous salt solutions containing ammonium (NH(4)(+)) and sulfate (SO(4)(2-)) ions were carried out using molecular dynamics simulations and vibrational sum frequency generation spectroscopy. The molecular dynamics simulations show that the predominant effect of SO(4)(2-) ions, which are strongly repelled from the surface, is to increase the thickness of the interfacial region. The vibrational spectra reported are in the O-H stretching region of liquid water. Isotropic Raman and ATR-FTIR (attenuated total reflection Fourier transform infrared) spectroscopies were used to study the effect of ammonium and sulfate ions on the bulk structure of water, whereas surface sum frequency generation spectroscopy was used to study the effect of these ions on the interfacial structure of water. Analysis of the interfacial and bulk vibrational spectra reveal that aqueous solutions containing SO(4)(2-) perturb the interfacial water structure differently than the bulk and, consistent with the molecular dynamics simulations, reveal an increase in the thickness of the interfacial region.     

On the molecular mechanism of ion specific Hofmeister series

Hofmeister series ranks the ability of salt ions in influencing a variety of properties and processes in aqueous solutions.In this review,we reexamine how these ions and some other small molecules affect water structure and thermodynamic properties,such as surface tension and protein backbone solvation.We illustrate the difficulties in interpreting the thermodynamic information based on structural and dynamic arguments.As an alternative,we show that the solvation properties of ions and proteins/small molecules can be used to explain the salt effects on the thermodynamic properties of the solutions.Our analysis shows that the often neglected cation-anion cooperativity plays a very important role in these effects.We also argue that the change of hydrogen donor/acceptor equilibrium by added cosolutes/cosolvents can be used to explain their effects on protein secondary structure denaturation/protection:those increase hydrogen donor concentrations such as urea and salts with strongly solvated cations/weakly hydrated anions tend to dissolve protein backbone acting as secondary structure denaturants,whereas those lack of hydrogen donors but rich in acceptors have the opposite effect.     

A review of the fundamental studies of the copper activation mechanisms for selective flotation of the sulfide minerals, sphalerite and pyrite

A review of the considerable, but often contradictory, literature examining the specific surface reactions associated with copper adsorption onto the common metal sulfide minerals sphalerite, (Zn,Fe)S, and pyrite (FeS(2)), and the effect of the co-location of the two minerals is presented. Copper "activation", involving the surface adsorption of copper species from solution onto mineral surfaces to activate the surface for hydrophobic collector attachment, is an important step in the flotation and separation of minerals in an ore. Due to the complexity of metal sulfide mineral containing systems this activation process and the emergence of activation products on the mineral surfaces are not fully understood for most sulfide minerals even after decades of research. Factors such as copper concentration, activation time, pH, surface charge, extent of pre-oxidation, water and surface contaminants, pulp potential and galvanic interactions are important factors affecting copper activation of sphalerite and pyrite. A high pH, the correct reagent concentration and activation time and a short time delay between reagent additions is favourable for separation of sphalerite from pyrite. Sufficient oxidation potential is also needed (through O(2) conditioning) to maintain effective galvanic interactions between sphalerite and pyrite. This ensures pyrite is sufficiently depressed while sphalerite floats. Good water quality with low concentrations of contaminant ions, such as Pb(2+)and Fe(2+), is also needed to limit inadvertent activation and flotation of pyrite into zinc concentrates. Selectivity can further be increased and reagent use minimised by opting for inert grinding and by carefully choosing selective pyrite depressants such as sulfoxy or cyanide reagents. Studies that approximate plant conditions are essential for the development of better separation techniques and methodologies. Improved experimental approaches and surface sensitive techniques with high spatial resolution are needed to precisely verify surface structures formed after copper activation. Sphalerite and pyrite surfaces are characterised by varying amounts of steps and defects, and this heterogeneity suggests co-existence of more than one copper-sulfide structure after activation.     

Do hydration forces play a role in thin film drainage and rupture observed in electrolyte solutions?

The mechanism that controls bubble coalescence in electrolyte solutions remains unresolved. The problem is difficult as sensitive dynamic thin film processes are critical. Here we discuss the relationship between film dynamics, specific-ion effects and the combining rules that codify electrolyte effects on bubble coalescence. The relationship with Hofmeister effects is explored, revealing that these very different manifestations of specific ion effects ultimately have the same origin, being the interfacial positioning of ions, which for the air–water interface correlates with the empirically derived α and β assignments used in the combining rules. Ion hydration is important as it strongly influences the interfacial positioning of ions and therefore ultimately bubble coalescence, however dynamic events determine if a collision results in coalescence and therefore we conclude that hydration forces play no role in bubble coalescence in electrolyte solutions.     

Aqueous NaCl and CsCl solutions confined in crystalline slit-shaped silica nanopores of varying degree of protonation

All-atom molecular dynamics simulations were conducted to study the dynamics of aqueous electrolyte solutions confined in slit-shaped silica nanopores of various degrees of protonation. Five degrees of protonation were prepared by randomly removing surface hydrogen atoms from fully protonated crystalline silica surfaces. Aqueous electrolyte solutions containing NaCl or CsCl salt were simulated at ambient conditions. In all cases, the ionic concentration was 1 M. The results were quantified in terms of atomic density distributions within the pores, and the self-diffusion coefficient along the direction parallel to the pore surface. We found evidence for ion-specific properties that depend on ion-surface, water-ion, and only in some cases ion-ion correlations. The degree of protonation strongly affects the structure, distribution, and the dynamic behavior of confined water and electrolytes. Cl(-) ions adsorb on the surface at large degrees of protonation, and their behavior does not depend significantly on the cation type (either Na(+) or Cs(+) ions are present in the systems considered). The cations show significant ion-specific behavior. Na(+) ions occupy different positions within the pore as the degree of protonation changes, while Cs(+) ions mainly remain near the pore center at all conditions considered. For a given degree of protonation, the planar self-diffusion coefficient of Cs(+) is always greater than that of Na(+) ions. The results are useful for better understanding transport under confinement, including brine behavior in the subsurface, with important applications such as environmental remediation.     

Interfacial properties of water + alcohol mixtures

Mixtures of water with alcohol are important in numerous engineering applications. Caused by the polarity of water and alcohol self-association of water and alcohol as well cross-association between water and alcohol appear in such complex mixtures. These features show significant impact on physical and chemical properties, especially phase equilibrium behaviour and hence interfacial properties. The Cahn–Hilliard theory was combined with original statistical associated fluid theory equation of states (SAFT EOS) in order to describe both the phase behaviour and interfacial properties with respect of association. The paper focuses on theoretical investigations of surface tension, density profiles, surface thickness in vapour–liquid or vapour–liquid–liquid equilibrium of mixtures of water with ethanol or 1-butanol. Results of vapour–liquid equilibrium surface tension calculations were compared with experimental data taken from the literature.     

Solvation of p-nitrophenol at a water/alkane interface: the role of ionic strength and salt identity

Second harmonic generation (SHG), a surface specific, nonlinear optical spectroscopy, was used to study the interfacial solvation of a neutral surfactant, p-nitrophenol (PNP), adsorbed to the water/cyclohexane interface in the presence of simple salts at varying salt concentrations. The purpose of this work was to determine what relationship (if any) exists between interfacial polarity and bulk solution ionic strength. Data show an apparent red shift in SHG spectra with an increase in salt anion size from fluoride to chloride to bromide at 1 M salt concentrations. A spectral red shift of the PNP electronic excitation implies an increase in local polarity. Within experimental limits, however, these observed interfacial spectral shifts mimic shifts in absorbance spectra observed for PNP in bulk electrolyte solutions. Given the similarities between bulk and surface behavior, we conclude that observed shifts in SHG spectra may be attributed to effects similar to those found in bulk solution. Additionally, the surface adsorption of PNP to the water/cyclohexane interface was studied to determine the surface distribution of PNP and the conjugate base, p-nitrophenoxide (PNP(-)), for a 10 mM PNP solution. PNP adsorption is favored over PNP(-) adsorption by a factor of 10, giving rise to an equilibrium surface distribution that is an order of magnitude greater than that found in bulk solution. These findings indicate that the amount of PNP(-) at the surface in an aqueous solution of 10 mM PNP is negligible.     

Effect of carboxymethyl cellulose and ionic strength on stability of mineral suspensions in potash ore flotation systems

The adsorption of sodium carboxymethyl cellulose from aqueous solutions varying in ionic strength from that of distilled water to 50% NaCl/KCl brine (about 3.5 mol/dm(3)) onto illite and dolomite has been studied. The purpose of this work was to investigate the solvency effects in the phenomena underlying the potash flotation process that is carried out in saturated brine. Based on viscosity measurements, the adsorption results were analyzed in terms of a simple model of polymer macromolecules in solution. Suspension stability measurements carried out concomitantly with adsorption tests showed the ranges of carboxymethyl cellulose concentration over which the tested suspensions either were aggregated or were restabilized.     

Effect of Alkanolamide on Interfacial Tension and Loss of Petroleum Sulfonates for Enhanced Oil Recovery

Experimental studies are conducted in order to elucidate the mechanisms of monoethanolamide responsible for synergism on lowering interfacial tension and decreasing loss due to adsorption on surface of reservoir sand and precipitation with multivalent cations in model oil/water/surfactants/brine systems. The interfacial tensions between solutions containing crude oil and monoethanolamide, petroleum sulfonates, or mixture of monoethanolamide and petroleum sulfonates at different ratios are studied without any alkali added in the solution. The results show significant synergic effect between monoethanolamide and petroleum sulfonates can reduce the interfacial tension to ultralow. Adsorption isotherms of monoethanolamide, petroleum sulfonates and mixture solution are determined to assess the effect of monoethanolamide on reducing the loss of petroleum sulfonates in formation. Static adsorption experiments indicate that the loss of petroleum sulfonates for adsorption and precipitation can be reduced on a great degree when monoethanolamide is mixed with petroleum sulfonates. The core-flooding tests show that the enhanced oil recovery with the formulation of surfactants of 0.3 wt% petroleum sulfonates and 0.2 wt% monoethanolamide can be increased by 26.6% without any alkali added in the flooding solution.