Investigation on the adhesion of polymer particles to the surface of a semiconductor

In this work the role of electrostatic forces in the adhesion of particles of dielectrics to a solid surface was studied. The experiment consisted in measuring simultaneously the force of adhesion and the charges of the electric double layer arising upon contact. The measurements were made with specially developed units—a pneumatic adhesiometer and a charge-spectrometer. The objects of study were polymer powders used in electrography, whose adhesion to thin layers of selenium samples were varied by varying the illumination and were estimated by their volume resistance in the dark and in the light. The shift in the Fermi level of the selenium caused by the change in the output work is accompanied by a change in adhesion of the particles. Experiments on the separation of polymer particles and films from selenium surface on illumination revealed spectral dependence of adhesion. In accordance with the electronic theory of adhesion, the effects observed may be attributed to the change in charge density of the electric double layer.     

Electroadhesive properties of polymer particles in contact with the photoconductor surface

The electroadhesive properties of polymer particles 5 to 30 μm in diameter have been assessed by the values of their individual charges after tearing off, and by the force of their adhesion to a solid surface. It has been established that the electroadhesion properties of polymer particles are largely determined by the donor-acceptor interaction between the main functional groups of polymers and the solid surface.

The electroadhesive properties of particles in contact with the surface of a photoconductor have been found to be affected by exposure to light. The spectral dependence of the adhesion force of particles and the variation in the distribution of the torn-off particles with regard to a charge sign under the effect of exposure to light are related to a variation in the density of the double electric layer at their interface with the solid surface.

The results obtained are interpreted on the basis of notions on the preponderant role of the forces of electrostatic nature, which are attributable to the effect of the double electric layer at the interface, in the adhesion interaction of the particles with the solid surface.     

Manipulating particles in microfluidics by floating electrodes

Various particle manipulations including enrichment, movement, trapping, separation, and focusing by floating electrodes attached to the bottom wall of a straight microchannel under an imposed DC electric field have been experimentally demonstrated. In contrast to a dielectric microchannel possessing a nearly uniform surface charge (or ζ potential), the metal strip (floating electrode) is polarized under the imposed electric field, resulting in a nonuniform distribution of the induced surface charge with a zero net surface charge along the floating electrode's surface, and accordingly induced-charge electroosmotic flow near the metal strip. The induced induced-charge electroosmotic flow can be regulated by controlling the strength of the imposed electric field and affects both the hydrodynamic field and the particle's motion. By using a single floating electrode, charged particles could be locally concentrated in a section of the channel or in an end-reservoir and move toward either the anode or the cathode by controlling the strength of the imposed electric field. By using double floating electrodes, negatively charged particles could be concentrated between the floating electrodes, subsequently squeezed to a stream flowing in the center region of the microchannel toward the cathodic reservoir, which can be used to focus particles.     

Modification of Surface Forces by Metal Ion Adsorption

Abstract

Sorption of ions may lead to variations in interparticle forces and, thus, changes in the stability of colloidal particles. Chemical interactions between metal ions and colloidal particles modify the molecular structure of the surface, the surface charge, and the electrical potential between colloidal particles. These modifications to the surface and to the electrical double layer due to metal ion sorption are reflected in the interaction force between a particle and another surface, which is measured in this study by atomic force microscopy (AFM). Specifically, AFM is used to investigate the sorption of copper ions from aqueous solutions by silica particles. The influence of metal ion concentration and solution ionic strength on surface forces is studied under transient conditions. Results show that as the metal ion concentration is decreased, charge reversal occurs and a longer period of time is required for the system to reach equilibrium. The ionic strength has no significant effect on sorption kinetics. Furthermore, neither metal concentration nor ionic strength exhibits any effect on sorption equilibria, indicating that for the experimental conditions used in this study, the surface sites of the silica particle are fully occupied by copper ions.     

Diffusiophoresis in a suspension of charge-regulating colloidal spheres

An analytical study of diffusiophoresis in a homogeneous suspension of identical spherical charge-regulating particles with an arbitrary thickness of the electric double layers in a solution of a symmetrically charged electrolyte with a uniform prescribed concentration gradient is presented. The charge regulation due to association/dissociation reactions of ionogenic functional groups on the particle surface is approximated by a linearized regulation model, which specifies a linear relationship between the surface charge density and the surface potential. The effects of particle-particle electrohydrodynamic interactions are taken into account by employing a unit cell model, and the overlap of the double layers of adjacent particles is allowed. The electrokinetic equations that govern the electric potential profile, the ionic concentration distributions, and the fluid flow field in the electrolyte solution surrounding the particle in a unit cell are linearized assuming that the system is only slightly distorted from equilibrium. Using a regular perturbation method, these linearized equations are solved with the equilibrium surface charge density (or zeta potential) of the particle as the small perturbation parameter. Closed-form formulas for the diffusiophoretic velocity of the charge-regulating sphere correct to the second order of its surface charge density or zeta potential are derived. Our results indicate that the charge regulation effect on the diffusiophoretic mobility is quite sensitive to the boundary condition for the electric potential specified at the outer surface of the unit cell. For the limiting cases of a very dilute suspension and a very thin or very thick electric double layer, the particle velocity is independent of the charge regulation parameter.     

Diffusiophoresis of charged particles and diffusioosmosis of electrolyte solutions

A review is presented on the theoretical basics and recent developments about the diffusiophoresis of charged particles and diffusioosmosis of electrolyte solutions driven by imposed electrolyte concentration gradients with particular emphasis on the principal analytical formulas and their physical interpretations. For diffusiophoresis, migrations of particles with thin polarized electric double layers but arbitrary zeta potentials and with arbitrary double layers but relatively low surface potentials are both discussed in detail, covering not only diffusiophoresis of single particles but also their motions near solid boundaries or other particles. For diffusioosmosis, fluid flows along single plane walls, in micro/nano-channels, and in porous media are considered, in which the solid walls may have arbitrary zeta potentials or surface charge densities, and both the effect of the lateral distribution of the diffuse ions and the relaxation effect in the double layers on the tangential electric field induced by the prescribed electrolyte concentration gradient are included.     

Metal-to-Oxide Charge Transfer Observed by a Kelvin Probe Force Microscope

The charge transfer from a nanometer-sized transition metal particle to a catalyst support is thought to affect reactions over the metal surface. We propose the application of Kelvin probe force microscope, which is an extension of the atomic force microscope, to observe the charge transfer particle-by-particle. Our recent results on Na adatoms, Cl adatoms, Pt adatoms and particles, and Ni particles evaporated on TiO₂(110) are reviewed.     

Approximate expressions of determining the double layer energy and force of interaction between two charged colloidal spheres

The approximate expressions have been obtained to calculate the electrical double layer energy and force between two spherical colloidal particles based on the improved Derjaguin approximation. Results for identical spheres interacting under constant surface potential, constant surface charge are given. Comparison of present results with numerical results calculated by Carnie and Chan is made. The expressions are found to work quite well for the constant surface potential case, and for the constant charge case, we make correction for the expressions. The results given are satisfactory providedkh0.4.     

The role of the pressing-on in the adhesion of elastic particles

One has carried out an analysis of the influence of the preliminary pressing-on on components of the adhesion force of different natures for the case of the contact of elastic particles with a rigid substrate. Two pressing-on variants are considered; as, - those realized under the effect of a dynamic and a static load. It has been shown that an increase in the adhesion of elastic particles to the surface resulting from the preliminary pressing-on is attributable to an increase in the adhesion force component due to a double electric layer in contact.     

Influence of plasticizer content on the transition of electromechanical behavior of PVC gel actuator

The actuation performance of plasticized poly(vinyl chloride) (PVC) gel actuators in an electric field depends on their chemical composition and electrical and mechanical properties. The influence of plasticizer (dibutyl adipate) content on electromechanical behavior of PVC gels was investigated by impedance spectroscopy and space charge measurement. By plasticizing the PVC, the dielectric constant and space charge density of PVC gel were drastically increased at 1:2 w/w ratio of PVC to plasticizer. To apply the results obtained from the impedance spectroscopy and space charge measurement, electrostatic adhesive forces generated between the PVC gel and the anode were measured. The electrostatic adhesive force at the anode was also dramatically increased at the same plasticizer content. All of the results indicated a transition of electromechanical behavior of PVC gel in the electric field, which was considered to originate from the orientation of polarized plasticizer molecules and dipole rotation of PVC chains. By using the electrostatic adhesive force of PVC gel derived from the electromechanical transition, a new electroactive actuator can be developed for novel applications.     

Effect of charge density gradient on characteristics of electric double layer for salt melts

The equilibrium conditions are analyzed for a spatially inhomogeneous ionic liquid using the density functional theory with allowance made for the second order gradient corrections. Solutions for the distribution of potential and charge density in the electric double layer at the ionic liquid/vapor interface are obtained using a parameterized total density profile normal to the surface. It is shown that taking into account the effects of the charge density gradient in the theory results in the appearance of damped oscillations of the charge density near the surface, while the double layer localized on the surface is reduced.     

Dielectrophoretic forces on the nanoscale

We have developed a method of calculation of the dielectrophoretic force on a nanoparticle in a fluid environment where variations in the electric field and electric field gradients are on the same nanoscale as the particle. The Boundary Element Dielectrophoretic Force (BEDF) method involves constructing a solvent-accessible or molecular surface surrounding the particle, calculating the normal component of the electric field at the surface boundary elements, and then solving a system of linear equations for the induced surface polarization charge on each element. Different surface elements of the molecule may experience quite different polarizing electric fields, unlike the situation in the point dipole approximation. A single 100-A-radius ring test configuration is employed to facilitate comparison with the well-known point dipole approximation (PDA). We find remarkable agreement between the forces calculated by the BEDF and PDA methods for a 1 A polarizable sphere. However, for larger particles, the differences between the methods become qualitative as well as quantitative; the character of the force changes from attractive at the origin of the ring for a 50-A sphere, to repulsive for a 75-A sphere. Equally dramatic differences are found in a more complex electrical environment involving two sets of 10 rings.     

Dynamic electrophoretic mobility of spherical colloidal particles in salt-free concentrated suspensions

In this contribution, the dynamic electrophoretic mobility of spherical colloidal particles in a salt-free concentrated suspension subjected to an oscillating electric field is studied theoretically using a cell model approach. Previous calculations focusing the analysis on cases of very low or very high particle surface charge are analyzed and extended to arbitrary conditions regarding particle surface charge, particle radius, volume fraction, counterion properties, and frequency of the applied electric field (sub-GHz range). Because no limit is imposed on the volume fractions of solids considered, the overlap of double layers of adjacent particles is accounted for. Our results display not only the so-called counterion condensation effect for high particle charge, previously described in the literature, but also its relative influence on the dynamic electrophoretic mobility throughout the whole frequency spectrum. Furthermore, we observe a competition between different relaxation processes related to the complex electric dipole moment induced on the particles by the field, as well as the influence of particle inertia at the high-frequency range. In addition, the influences of volume fraction, particle charge, particle radius, and ionic drag coefficient on the dynamic electrophoretic mobility as a function of frequency are extensively analyzed.     

Electrostatic double layer force between a sphere and a planar substrate in the presence of previously deposited spherical particles

A finite element model of the electrostatic double layer interaction between an approaching colloidal particle and a small region of a charged planar surface containing four previously deposited particles is presented. The electrostatic interaction force experienced by the approaching particle is obtained by solving the Poisson-Boltzmann equation with appropriate boundary conditions representing this complex geometry. The interaction forces obtained from the detailed three-dimensional finite element simulations suggest that for the many-body scenario addressed here, the electrostatic double layer repulsion experienced by the approaching particle is less than the corresponding sphere-plate interaction due to the presence of the previously deposited particles. The reduction in force is quite significant when the screening length of the electric double layer becomes comparable to the particle radius (kappaa approximately 1). The results also suggest that the commonly used technique of pairwise addition of binary interactions can grossly overestimate the net electrostatic double layer interaction forces in such situations. The simulation methodology presented here can form a basis for investigating the influence of several previously deposited particles on the electrostatic repulsion experienced by a particle during deposition onto a substrate.     

Charge heterogeneity of surfaces: mapping and effects on surface forces

The DLVO theory treats the total interaction force between two surfaces in a liquid medium as an arithmetic sum of two components: Lifshitz–van der Waals and electric double layer forces. Despite the success of the DLVO model developed for homogeneous surfaces, a vast majority of surfaces of particles and materials in technological systems are of a heterogeneous nature with a mosaic structure composed of microscopic and sub-microscopic domains of different surface characteristics. In such systems, the heterogeneity of the surface can be more important than the average surface character. Attractions can be stronger, by orders of magnitude, than would be expected from the classical mean-field DLVO model when area-averaged surface charge or potential is employed. Heterogeneity also introduces anisotropy of interactions into colloidal systems, vastly ignored in the past. To detect surface heterogeneities, analytical tools which provide accurate and spatially resolved information about material surface chemistry and potential — particularly at microscopic and sub-microscopic resolutions — are needed.Atomic force microscopy (AFM) offers the opportunity to locally probe not only changes in material surface characteristic but also charges of heterogeneous surfaces through measurements of force–distance curves in electrolyte solutions. Both diffuse-layer charge densities and potentials can be calculated by fitting the experimental data with a DLVO theoretical model. The surface charge characteristics of the heterogeneous substrate as recorded by AFM allow the charge variation to be mapped. Based on the obtained information, computer modeling and simulation can be performed to study the interactions among an ensemble of heterogeneous particles and their collective motions. In this paper, the diffuse-layer charge mapping by the AFM technique is briefly reviewed, and a new Diffuse Interface Field Approach to colloid modeling and simulation is briefly discussed.     

Mechanisms behind concentration profiles illustrated by charge and concentration distributions around ions in double layers

The mechanisms behind the behaviour of concentration and charge density profiles in diffuse electric double layers are investigated quantitatively for 1:1 and 2:2 electrolytes. This is done by analysing various contributions to the mean force that acts on each ion. The forces are obtained from the calculated ionic charge and concentration distributions around individual ions at various positions in the double layer. These distributions are presented graphically which allows an immediate visual illustration of the mechanisms in action. Some features studied are charge inversion in double layers for divalent aqueous electrolytes, overcompensation of surface charge due to large amounts of physisorbed counterions, ion size effects in the double layer structure and various mechanisms that cause deviations from the predictions of the Poisson–Boltzmann approximation. A major objective of the paper is to present the results in a visual form and explain aspects of modern double layer theory in a simple manner.     

Dynamic Mobility of Two Spherical Particles with Thick Double Layers

The dynamic electrophoretic mobility of a pair of nearby spherical particles is analyzed in the case when the thickness of the electrical double layer around each particle is comparable to the particle radius. By means of an integral reciprocal relation, a formal expression is obtained for the force and torque on N spheres subject to an oscillating electric field which may be spatially varying. Upon linearizing in the surface potential, this expression is shown to depend upon a set of purely hydrodynamic problems involving N neutral spheres, the calculation of the electric field around N neutral spheres, and the equilibrium charge distribution around N charged spheres. In the case of a single particle, the known analytic formula for the dynamic mobility is recovered. For a pair of identical particles, the dynamic mobility is calculated numerically, using known solutions to the required subproblems. An analytical expression for the mobility of a pair of widely separated spheres is also obtained by a method of reflections, and this is in excellent agreement with the numerical results outside the range of double layer overlap. Copyright 2000 Academic Press.     

AC electrokinetics of conducting microparticles: A review

This paper reviews both theory and experimental observation of the AC electrokinetic properties of conducting microparticles suspended in an aqueous electrolyte. Applied AC electric fields interact with the induced charge in the electrical double layer at the metal particle–electrolyte interface. In general, particle motion is governed by both the electric field interacting with the induced dipole on the particle and also the induced-charge electro-osmotic (ICEO) flow around the particle. The importance of the RC time for charging the double layer is highlighted. Experimental measurements of the AC electrokinetic behaviour of conducting particles (dielectrophoresis, electro-rotation and electro-orientation) are compared with theory, providing a comprehensive review of the relative importance of particle motion due to forces on the induced dipole compared with motion arising from induced-charge electro-osmotic flow. In addition, the electric-field driven assembly of conducting particles is reviewed in relation to their AC electrokinetic properties and behaviour.     

Atomic force microscopy study of cellulose surface interaction controlled by cellulose binding domains

Colloidal probe microscopy has been used to study the interaction between model cellulose surfaces and the role of cellulose binding domain (CBD), peptides specifically binding to cellulose, in interfacial interaction of cellulose surfaces modified with CBDs. The interaction between pure cellulose surfaces in aqueous electrolyte solution is dominated by double layer repulsive forces with the range and magnitude of the net force dependent on electrolyte concentration. AFM imaging reveals agglomeration of CBD adsorbed on cellulose surface. Despite an increase in surface charge owing to CBD binding to cellulose surface, force profiles are less repulsive for interactions involving, at least, one modified surface. Such changes are attributed to irregularity of the topography of protein surface and non-uniform distribution of surface charges on the surface of modified cellulose. Binding double CBD hybrid protein to cellulose surfaces causes adhesive forces at retraction, whereas separation curves obtained with cellulose modified with single CBD show small adhesion only at high ionic strength. This is possibly caused by the formation of the cross-links between cellulose surfaces in the case of double CBD.