Development of a new method for direct determination of selenium associated with atmospheric particulate matter using chemical modifiers and graphite probe furnace atomic absorption spectrometry

Direct determination of selenium on or in atmospheric particulate matter (APM) has been achieved using an integrated filtration and analysis system developed in our laboratories. The filtration (sampling) and analysis system consists of a porous electrographite plate which is used initially for the purpose of collecting APM and subsequently as a probe in graphite probe furnace atomic absorption spectrometry. Selenium produced a double peak when it was atomized from such an electrographite probe. Palladium nitrate+magnesium nitrate, as a mixed chemical modifier or ascorbic acid as a chemical modifier, eliminated the double peak. The addition of the chemical modifier(s) also removed the unpredictable changes in the peak-height and the peak-area absorbance which occurred from one atomization cycle to the next if the chemical modifier was not used. Precision of 5% RSD (peak-area absorbance) was obtained for an aqueous solution of selenium standard containing 1.25 ng of selenium with palladium nitrate+magnesium nitrate mixed chemical modifier, or ascorbic acid chemical modifer. The characteristic masses and the limits of detection for the aqueous solution of selenium standard with palladium nitrate+magnesium nitrate mixed chemical modifier are 27 and 41 pg (peak-area absorbance), respectively, and with ascorbic acid chemial modifier are 29 and 36 pg, respectively (peak-area absorbance). The results of analysis of the NIST (formerly National Bureau of Standards) Standard Reference Material No. 1648, Urban Particulate Matter, for selenium with palladium nitrate+magnesium nitrate mixed chemical modifier gave a recovery of 92%, and a precision of 10% RSD, and characteristic mass and the limit of detection of 20 and 37 pg, respectively.     

Determination of tributyltin in toluene extract from sea water by graphite furnace atomic absorption spectrometry with a new matrix modifier

A new matrix modifier composed of calcium and chromium[VI] was proposed for the determination of tributyltin (TBT) in toluene extract from sea water containing sediment by graphite furnace atomic absorption spectrometry (GFAAS). Fourteen inorganic and organic compounds (barium, calcium, chromium[VI], lanthanum, magnesium, nickel, palladium, strontium, calcium-chromium[VI], calcium-strontium, nickel isocaprylate, 5%-, 10%-aqueous solution of ascorbic acid and toluene-saturated solution of ascorbic acid) as a matrix modifier were comparatively studied and a matrix modifier composed from 5 microg of calcium and 1 microg of chromium[VI] was found to give the best performance. The interference effects of co-existing elements in sea water containing sediment (aluminium, iron, magnesium, sodium and strontium) were studied. TBT in eight toluene extracts was determined by GFAAS with the proposed matrix modifier. The relative standard deviation was 3.0% for 63 ng ml(-1) of TBT (n = 11). The recoveries were 88-104%. The characteristic mass was 7 pg. The linearity range was 0-250 ng mg(-1).     

Effectiveness of palladium as a chemical modifier for direct silver and manganese determination in cocaine and heroin by electrothermal atomic absorption spectrometry

Methods for the direct determination of silver and manganese in cocaine and heroin by electrothermal atomic absorption spectrometry using palladium as chemical modifier have been developed. Cocaine samples, 0.5 g, were dissolved in 2 ml of 35.0% (m/v), HNO(3) diluting to 10 ml with ultrapure water. A comparative study of palladium, magnesium nitrate, palladium-magnesium nitrate and nitric acid used as chemical modifiers was carried out, and it was found that palladium alone is adequate to stabilize silver and manganese at charring temperatures of 1000 and 1300 degrees C respectively. A study was made on the insertion of a cooling step before the atomization step, and this approach was not advantageous. Limits of detection of 2.3 and 6.9 microg kg(-1) were obtained for silver and manganese respectively. The analytical recovery oscillated between 95.9 and 103.6% for silver and between 99.7 and 103.0% for manganese. Finally, a study of some interferences and a study of the precision and analytical recovery of the amount of sample were also carried out.     

Nickel and strontium nitrates as modifiers for the determination of selenium in wine by Zeeman electrothermal atomic absorption spectrometry

A mixed matrix modifier of nickel and strontium nitrates was used as a chemical modifier for the determination of selenium in wines by Zeeman electrothermal atomic absorption spectrometry. Wine samples were heated on a boiling water bath with small amounts of nitric acid and hydrogen peroxide. For complete elimination of interference, especially from sulfates and phosphates, selenium is complexed with ammonium pyrolidinedithiocarbamate (APDTC), extracted into methyl isobutyl ketone (MIBK), and measured by ETAAS. The graphite furnace temperature program was optimized for both aqueous and organic solutions. Pyrolysis temperatures of 1300 degrees C and 800 degrees C were chosen for aqueous and organic solutions, respectively; 2700 degrees C and 2100 degrees C were used as optimum atomization temperatures for aqueous and organic solutions, respectively. The optimum modifier mass established is markedly lower than those presented in the literature. The platform atomization ensures pretreatment stabilization up to 1100 degrees C and 1600 degrees C, respectively, for organic and aqueous selenium solutions. The procedure was verified by the method of standard addition. The investigated wine samples originated from the different regions of the Republic of Macedonia. The selenium concentration varied from not detectable to 0.93 microg L(-1).     

Determination of indium by graphite furnace atomic absorption spectrometry after coprecipitation with chitosan.

A sensitive and simple method for the determination of trace amounts of indium in water samples by graphite furnace atomic absorption spectrometry (GFAAS) after coprecipitation with chitosan was investigated. Indium was quantitatively preconcentrated from water samples by coprecipitation with chitosan at pH 7.0-9.0. The coprecipitant was easily dissolved with acetic acid, and indium in the resulting solution was determined by GFAAS. The addition of lanthanum as a chemical modifier was more effective for the atomic absorbance of indium. The detection limit (S/N > or = 3) for indium was 0.04 microg dm(-3), and the relative standard deviations (n = 5) were 3.5-4.5% at 1.0 microg/100 cm3. The results obtained in this study indicate that the proposed method can be successfully applied to the determination of trace indium in water samples.     

Effectiveness of palladium as a chemical modifier for the determination of lead in biological materials and foodstuffs by graphite furnace atomic absorption spectrometry

Summary A combination of 6 g palladium and 15 g magnesium nitrate is proposed as chemical modifier for lead determinations in biological materials and foodstuffs. The applicability of this modifier was investigated by the analysis of several types of samples, as compared to the classical NH₄H₂PO₄ and Mg(NO₃)₂ modifier. Direct determinations of lead against aqueous standard solutions can be performed in 3-fold diluted urine, 2-fold diluted milk and 6-fold diluted blood, when the proposed modifier is added. A method for lead determinations in potatoes using the combined palladium and magnesium nitrate modifier, after a microwave acid digestion, is described. The optimum GFAAS pyrolysis temperature remains dependent on the matrix and should be determined for each type of sample. A wider linear range of the calibration curve is observed when the proposed Pd modifier is used.     

Comparison of modifiers for determination of arsenic, antimony and selenium by atomic absorption spectrometry with atomization in graphite tube or hydride generation and in-situ preconcentration in graphite tube

The study was performed to compare the effect of magnesium modifier (magnesium nitrate) with that of other modifiers (palladium nitrate and nickel nitrate) in determination of arsenic, antimony and selenium by atomic absorption spectroscopy with atomization in a graphite tube, with generation of hydrides and in situ preconcentration in a graphite tube. The assumed criterion of a modifier performance was the magnitude of the analytical signal. It was found that in determinations with atomization in a graphite furnace the effects of all these modifiers were comparable, while in those with hydride generation and in situ preconcentration in a graphite tube the magnesium modifier showed poorer performance (25% decrease of the analytical signal). In determinations of arsenic and selenium the analytical signal obtained with magnesium salt as a modifier was comparable with those obtained in the presence of all other modifiers.     

Direct determination of cadmium and copper in seawater using a transversely heated graphite furnace atomic absorption spectrometer with Zeeman-effect background corrector

Methods for the direct determination of copper and cadmium in seawater were described using a graphite furnace atomic absorption spectrometer (GFAAS) equipped with a transversely heated graphite atomizer (THGA) and a longitudinal Zeeman effect background corrector. Ammonium nitrate was used as the chemical modifier to determine copper. The mixture of di-ammonium hydrogen phosphate and ammonium nitrate was used as the chemical modifier to determine cadmium. The matrix interference was removed completely so that a simple calibration curve method could be applied. This work is the first one with the capability of determining cadmium in unpolluted seawater directly with GFAAS using calibration curve based on simple aqueous standards. The accuracy of the methods was confirmed by analysis of three kinds of certified reference saline waters. The detection limits (LODs), with injection of a 20-mul aliquot of seawater sample, were 0.06 mug l(-1) for copper and 0.005 mug l(-1) for cadmium.     

Selenium determination in tissue samples of Nile tilapia using ultrasound-assisted extraction

This paper proposes a method to determine selenium in samples of fish muscle and liver tissue using ultrasound assisted extraction process, and analysed by graphite furnace atomic absorption spectrometry (GFAAS). The selenium content was extracted by 0.10 M HCl at the optimal extraction conditions which were established as follows: sample mass of 100 mg; granulometry of the sample <60 μm; sonication time of five 40 s cycles; and sonication power of 136 W. The selenium determinations were performed by GFAAS, at a drying temperature of 120°C/250°C, pyrolysis temperature of 1300°C, atomization temperature of 2300°C, and cleaning temperature of 2800°C. Palladium nitrate was used as a chemical modifier coinjected with the samples, and tungsten as a permanent modifier. The concentration of selenium determined in the pool of fish muscle and liver tissue were 280.4±4.2 e 592.3±6.7 μg kg⁻¹, respectively. The accuracy and precision of the proposed extraction method were evaluated using certified standard Bovine Muscle — NIST 8414. The results obtained by the ultrasonic extraction method were equivalent to those obtained by the method of acid mineralization of samples in a microwave oven     

Determination of tellurium in indium antimonide semiconductor material by electrothermal atomic absorption spectrometry

A method for the determination of the dopant concentration of tellurium in dissolved indium antimonide semiconductor material by electrothermal atomic absorption spectrometry (ETAAS) was developed. Efforts were made to investigate the optimal conditions of the furnace heating program and the effect of palladium modifier on the variation of tellurium and the background absorbance. According to the results obtained, the presence of palladium chemical modifier in the analysis of indium antimonide allowed the successful retention of tellurium in the graphite tube, and the optimum mass of palladium modifier was found to be dependent on the sample matrix concentration. The absorbance profile of tellurium and the background level were significantly improved when a pyrolysis temperature of 1100 degrees C and an atomization temperature of 2200 degrees C were employed in the optimized heating program. With the use of this method, a detection limit of 0.8 microg g(-1) tellurium in indium antimonide could be achieved. The applicability of the proposed method was evaluated by comparison with two independent methods, i.e. slurry sampling-ETAAS and ICP-MS. From the good agreement between the results, it was demonstrated that the proposed method is suitable for the determination of typical dopant concentrations of tellurium in indium antimonide.     

Kinetics of selenium atomization in electrothermal atomization atomic absorption spectrometry (ETA-AAS). Part 3: Chemical interference of sulphate using palladium modifiers

The interference caused by sulphate (as the sodium salt) in the electrothermal atomization atomic absorption analysis of selenium was investigated for prereduced and unreduced palladium nitrate modifiers. Kinetic parameters of the selenium atomization were calculated for both types of modifier with varying amounts of sulphate added. Prereduced palladium was a better modifier since it tolerated higher amounts of interferent. For high levels of interferent, the kinetic parameters approached that of selenium without modifier. It was postulated that the interference was caused by the formation of palladium sulphate which reduces the number of active palladium sites available for selenium stabilization. The poorer performance of the unreduced modifier was explained in that the formation of stabile palladium sulphate hindered the reduction of Pd(II) to palladium metal which was needed for the selenium stabilization. Sulphate only interfered on the high temperature stabilization process; the low temperature stabilization, linked to the formation of a [Pd,Se,O] compound, was unaffected. The results support earlier literature reports that selenium loss occurs by covolatilization with the matrix and gives a reason why palladium modifiers are rendered useless by the sulphate interferent.     

Multielement electrothermal atomic absorption spectrometry: A study on direct and simultaneous determination of chromium and manganese in urine

A study was carried out on the direct determination of Cr and Mn in urine using simultaneous atomic absorption spectrometry (SIMAAS). The heating program conditions, the absorbance signal profiles, the influence of different chemical modifiers, and the urine sample volume delivery into the tube were optimized to perform the calibration with aqueous solutions. Among several chemical modifiers tested, the best recovery and repeatability results were obtained for 3 microg Mg(NO3)2. On using this modifier, the pyrolysis and atomization temperatures for simultaneous determination of Cr and Mn were 1,300 degrees C and 2,500 degrees C, respectively. Urine samples were diluted (1+1) with 2.0% (v/v) HNO3 + 0.05% (w/v) Triton X-100 prepared in high purity water. A 20-microL aliquot of analytical solution and 10 microL of chemical modifier solution were delivered to the graphite tube. The characteristic masses were 7.8 pg for Cr (RSD=4.0%) and 4.6 pg for Mn (RSD=2.6%). The limits of detection were 0.08 microg L(-1) (n=20, 3s) for Cr and 0.16 microg L(-1) (n=20, 3s) for Mn. Recovery studies for 1.0 or 2.5 microg L(-1) of Cr and Mn added to different urine samples showed acceptable results for Cr (100%, RSD=14%) and Mn (88%, RSD=5.6%).     

泡沫塑料富集–石墨炉原子吸收光谱法测定贝类水产品中痕量铊

采取微波消解的前处理手段消解样品,经泡沫塑料分离富集后,用石墨炉原子吸收光谱法测定贝类水产品中痕量铊。以1.5 mL Fe3+,2 mL H2O2和5%王水介质作为吸附体系将样品中铊分离富集,再以硝酸钯、抗坏血酸作为基体改进剂进行测定。铊的质量浓度在0～50μg/L范围内线性良好,相关系数为0.999 7,方法的检出限可达0.07μg/g。测定结果的相对别准偏差为1.53%～4.01%(n=7),加标回收率为87.1%～98.3%。泡沫塑料富集–石墨炉子吸收光谱法测定贝类水产品中痕量铊是一种准确、安全、便捷的检测方法。     

Direct determination of parts-per-billion levels of germanium in botanical samples and coal fly ash by graphite furnace atomic absorption spectrometry

 Parts-per-billion levels of germanium can be determined directly by graphite furnace atomic absorption spectrometry (GFAAS) using palladium plus strontium as a mixed modifier resulting in pyrolysis temperatures up to 1400 °C without loss of germanium. At this temperature the matrix effect including the most troublesome sulfate interference can be eliminated. Palladium plus strontium nitrate is advantageous compared to palladium alone or palladium plus magnesium nitrate; an amount of 15 μg of sulfate does not show any interference on the determination of 1 ng of germanium. The method was successfully applied to the determination of ng/g levels of germanium in botanical samples and coal fly ash after thermal decomposition of the samples in a mixture of acids using a pressure bomb. The results were consistent with the reference values given for botanical samples and coal fly ash with a recovery range of 96.4∼103.4% Received: 16 September 1996/Revised: 10 December 1996/Accepted: 14 January 1997     

Determination of benzoyl peroxide and benzoic acid in wheat flour by high-performance liquid chromatography and its identification by high-performance liquid chromatography-mass spectrometry

An HPLC method on C18 column using a gradient mobile phase is proposed for the separate determination of residual benzoyl peroxide (BP) and benzoic acid (BA) in flour and wheat products. The recoveries obtained were quite excellent, from 96.0 to 99.3% for BP added to the flour, and 91.3% for BA added to the flour. Analysis of 10 samples of commercial foods such as flour and wheat products, detected 0.7 microg/g of BP in imported noodles. Furthermore, we successfully verified the existence of BP by LC-MS. These methods are simple and reliable for determination and verifying the amount of BP and BA in foods since now the use of BP as a food additive is permitted in many countries.     

Direct sample introduction of wines in graphite furnace atomic absorption spectrometry for the simultaneous determination of arsenic, cadmium, copper and lead content

A multi-element graphite furnace atomic absorption spectrometry (GFAAS) method was elaborated for the simultaneous determination of As, Cd, Cu, and Pb in wine samples of various sugar contents using the transversally heated graphite atomizer (THGA) with end-capped tubes and integrated graphite platforms (IGPs). For comparative GFAAS analyses, direct injection (i.e., dispensing the sample onto the IGP) and digestion-based (i.e., adding oxidizing agents, such as HNO(3) and/or H(2)O(2) to the sample solutions) methods were optimized with the application of chemical modifiers. The mixture of 5 microg Pd (applied as nitrate) plus 3 microg Mg(NO(3))(2) chemical modifier was proven to be optimal for the present set of analytes and matrix, it allowing the optimal 600 degrees C pyrolysis and 2200 degrees C atomization temperatures, respectively. The IGP of the THGA was pre-heated at 70 degrees C to prevent the sputtering and/or foaming of sample solutions with a high organic content, dispensed together with the modifier solution, which method also improved the reproducibility of the determinations. With the digestion-based method, the recovery ranged between 87 and 122%, while with the direct injection method it was between 96 and 102% for Cd, Cu, and Pb, whereas a lower, compromise recovery of 45-85% was realized for As. The detection limits (LODs) were found to be 5.0, 0.03, 1.2, and 0.8 microg l(-1) for As, Cd, Cu, and Pb, respectively. The characteristic mass (m(0)) data were 24 pg As, 1.3 pg Cd, 13 pg Cu, and 35 pg Pb. The upper limits of the linear calibration range were 100, 2, 100, and 200 microg l(-1) for As, Cd, Cu, and Pb, respectively. The precisions were not worse than 4.8, 3.1, 3.7, and 2.3% for As, Cd, Cu, and Pb, respectively. For arsenic, a higher amount of the modifier (e.g., 20 microg Pd plus 12 microg Mg(NO(3))(2)) could be recommended to overcome the interference from the presence of sulphate and phosphate in wines. Although this method increased the sensitivity for As (m(0)=20 pg), it also enhanced the background noise, thus only a slight improvement in the LOD of As (3.9 microg l(-1)) was realized. For the 35 red and white wine samples studied, the highest metal contents were observed for Cu ranging from 20 to 640 microg l(-1) (average: 148 microg l(-1)), followed by Pb from 6 to 90 microg l(-1) (average: 32.3 microg l(-1)), and Cd from 0.05 to 16.5 microg l(-1) (average: 1.06 microg l(-1)), whereas the As content was below the LOD. This wide fluctuation in the trace metal content could be associated with the origin of wines from various regions (i.e., different trace metal level and/or quality of soil, and/or anthropogenic impact), and with diverse materials (e.g., additives and containers) involved in the wine production processes. The Cu content of wine samples was significantly correlated with Pb, whereas its weak anti-correlation was found with Cd. Interestingly, the level of Pb was anti-correlated with the year of production of the wines. This is likely due to the gradual decrease in the Pb content of soils of vineyards by time, which certainly causes less Pb-uptake of the grape plant, thus a decrease in the Pb content of wines as well.     

石墨炉原子吸收法直接测定海水中铅的方法探索

目的探索石墨炉原子吸收法直接测定海水中铅的检测方法。方法用硝酸铵稀释海水样品,用硝酸钯和磷酸二氢铵作为基体改进剂,用石墨炉原子吸收法测定了海水中的铅含量。结果通过加标回收的验证,检测结果准确可靠。结论适合用于海水中铅含量的测定。     

ETAAS determination of nickel in serum and urine

Methods for the direct determination of Ni in human blood serum and urine by electrothermal atomic absorption spectrometry (ETAAS) are described. Hydrogen peroxide was proposed as matrix modifier, assisting thermal decomposition of proteins during the ashing step. A pyrolysis temperature of 1,200 degrees C was found to be optimal while 2,100 degrees C and 2,200 degrees C were found to be optimal atomizing temperatures for Ni in serum and urine respectively. Calibration was performed by using a calibration curve prepared with aqueous standard solutions of Ni (glycine must be used as modifier for Ni in aqueous solutions). The limits of detection, defined as the blank values plus 3 times the standard deviation of the blank values, were 0.2 microg/L for both serum and urine samples. Relative standard deviations for serum samples with concentrations of Ni in the range 0.5-2 microg/L were 10-15% and for urine samples with Ni concentrations in the range 0.5-2.5 microg/L were 8-10%.     

Selenomethionine content of candidate reference materials.

Selenium has been identified as an antioxidant of importance in the diet. Accurate determination of its chemical forms depends on the availability of suitable reference materials (RMs). Two candidate reference materials for determination of selenomethionine (Semet) in food-related materials, a standard wheat gluten sample (NIST RM 8418 Wheat Gluten) and a commercial selenium enriched yeast, have been examined by use of a gas chromatography-isotope dilution mass spectrometry (IDMS) procedure, after treatment of the matrix with 0.1 mol L(-1) hydrochloric acid containing stannous chloride, addition of CNBr, and extraction with chloroform. This procedure results in cleavage of the CH3Se group to form volatile CH3SeCN. Addition of isotopically enriched 74Semet to an analytical sample enables estimation of the naturally occurring protein-bound 80Semet by IDMS without a protein-digestion process. We found that the Wheat Gluten RM contains a significant amount of Semet as a portion of its assigned value of 2.58 microg Se(total g(-1). Commercial selenium yeast tablets are labeled as containing an elevated level of "organic selenium", usually as Semet. The sample we investigated contained 210 microg Se(total) g(-1) sample as determined separately by IDMS, measuring elemental selenium after digestion. 73% of this total (153 +/- 21 microg Se(semet) g(-1); n = 23) was present as Semet. Thus, these two materials contain significant amounts of their total selenium content as Semet and would be good candidates for further study and characterization as reference materials for determining this important food component. The CNBr reaction used will also enable the determination of Se-(methyl)selenocysteine, the biological role of which is of recent interest. In addition to matrix RMs for Semet, it is important to have standard materials of the pure substance. We have examined a sample of a candidate standard material of selenomethionine being prepared by the USP. It was confirmed that this material is pure selenomethionine.     

Comparative study of magnesium nitrate,palladium nitrate and reduced palladium for the direct determination of mercury in sea water by electrothermal atomization atomic absorption spectrometry

A comparative study of different chemical modifiers in graphite furnace atomic absorption spectrometry for the direct determination of mercury in sea water samples, in synthetic sea water sample of high (72.8%) and low 34.2%) salinity and in aqueous solutions, was carried out. The use of reduced palladium produces better results. The mixture of palladium nitrate and ascorbic acid, gives the best limit of detection (1.9 gl^–1). The use of reduced palladium and magnesium nitrate produced excellent recoveries (close to 100%) in the whole salinity range for all mercury concentration tested. The use of palladium nitrate alone or combined with magnesium nitrate gave good recoveries with respect to a real sea water sample for low salinities. The interference from the major components of sea water were completely removed by using reduced palladium and magnesium nitrate modifiers. Thus, a single calibration curve with synthetic sea water may be applied to the analysis of sea water samples of widely differing salinities.