Synthesis, structure, photophysics and electrochemiluminescence of Re(i) tricarbonyl complexes with cationic 2,2-bipyridyl ligands

Two water soluble Re(i) tricarbonyl diimine complexes containing cationic 2,2'-bipyridyl ligands [Re(L1)(CO)(3)(AN)](2+) (1) and [Re(L2)(CO)(3)(AN)](3+) (2) (L1 and L2: a cationic 2,2'-bipyridyl ligand, AN: acetonitrile) were synthesized and characterized. Their photophysical, electrochemical and electrochemiluminescent properties were investigated. The crystal structures of the two complexes have also been determined. Electrochemiluminescence (ECL) of the two complexes 1 and 2 have been studied in aqueous buffer solution in the presence of co-reactant tri-n-propylamine (TPrA) or 2-(dibutylamino)ethanol (DBAE) at a Au working electrode. The ECL behavior of the complexes was also studied in the presence of several surfactants such as Triton X-100 and Zonyl FSN. The ECL signals of the rhenium(i) complex were enhanced about 190-fold and 70-fold at a Au electrode in the presence of Triton X-100 for the [Re(L1)(CO)(3)(AN)](2+)/TPrA and [Re(L1)(CO)(3)(AN)](2+)/DBAE systems, respectively.     

Biomimetic Oxidation of 1-1'-Bi-2-naphthol with Copper(Ⅰ) and Copper(Ⅱ)-amine Complexes

Copper amine complexes were used to mimic oxidases in the biomimetic oxidation of organic compounds^[1]. Masahiro Noji and coworkers^[2] reported the oxidative coupling of 2-naphthol into high yield of 1,1'-bi-2-naphthol (1) by using catalytical amount of CuCl-tetramethylethylenediamine complex at the presence of O₂. Here we report the catalytic oxidation of 1 with copper amine complexes.     

Monolayer-protected Au cluster (MPC)-supported Ti-BINOLate complex

[reaction: see text] Disulfides bearing (R)-1,1'-bi-2-naphthol ((R)-BINOL) moieties at each terminal position have been successfully introduced on the surface of Au cluster. Ti-BINOLate complex generated from the obtained monolayer-protected Au cluster (MPC) promoted catalytic asymmetric alkylation of benzaldehyde with Et(2)Zn to afford the adduct in up to 98% yield with 86% ee. After completion of the reaction, the BINOL-functionalized MPC was easily recovered.     

A nitrate-selective electrode based on tris(2,2',2"-salicylideneimino)triethylamine.

A new nitrate-selective liquid-membrane electrode based on the tris(2,2',2"-salicylideneimino)triethylamine-iron(III) complex has been developed. This electrode exhibits a linear Nernstian response over the range 10(-1)-10(-4) M of nitrate, with a slope of 54.3 +/- 0.9 mV per p[NO3]. The effects of the pH and the liquid-membrane composition were also investigated. The lifetime of the electrode is at least one month. The selectivity coefficients for ten monovalent ions were calculated. The preparation procedure of the electrode is very easy and inexpensive. Moreover, the proposed electrode was applied for the determination of nitrate in fertilizers.     

Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.     

Facile synthesis of gold nanoparticles with narrow size distribution by using AuCl or AuBr as the precursor

Gold(I) halides, including AuCl and AuBr, were employed for the first time as precursors in the synthesis of Au nanoparticles. The synthesis was accomplished by dissolving Au(I) halides in chloroform in the presence of alkylamines, followed by decomposition at 60 degrees C. The relative low stability of the Au(I) halides and there derivatives eliminated the need for a reducing agent, which is usually required for Au(III)-based precursors to generate Au nanoparticles. Controlled growth of Au nanoparticles with a narrow size distribution was achieved when AuCl and oleylamine were used for the synthesis. FTIR and mass spectra revealed that a complex, [AuCl(oleylamine)], was formed through coordination between oleylamine and AuCl. Thermolysis of the complex in chloroform led to the formation of dioleylamine and Au nanoparticles. When oleylamine was replaced with octadecylamine, much larger nanoparticles were obtained due to the lower stability of [AuCl(octadecylamine)] complex relative to [AuCl(oleylamine)]. Au nanoparticles can also be prepared from AuBr through thermolysis of the [AuBr(oleylamine)] complex. Due to the oxidative etching effect caused by Br(-), the nanoparticles obtained from AuBr exhibited an aspect ratio of 1.28, in contrast to 1.0 for the particles made from AuCl. Compared to the existing methods for preparing Au nanoparticles through the reduction of Au(III) compounds, this new approach based on Au(I) halides offers great flexibility in terms of size control.     

Effect of phosphate buffer on photodegradation reactions of riboflavin in aqueous solution

The effect of phosphate buffer on aerobic photodegradation reactions of riboflavin (RF) at pH 7.0 has been studied. The photoproducts of the two major reactions, viz., intramolecular photoreduction and intramolecular photoaddition, have been determined by a specific multicomponent spectrophotometric method. The overall photodegradation of riboflavin in the presence of phosphate buffer involves the participation of both H2PO4-and HPO4(2-) species. The second-order rate constants for the H2PO4(-)-catalysed photodegradation of riboflavin (normal photolysis) to lumichrome (LC) and HPO4(2-)-catalysed photodegradation of riboflavin (photoaddition) to cyclodehydroriboflavin (CDRF) are 0.93 x 10(-4) and 4.0 x 10(-4) M(-1) s(-1), respectively. The addition of 0.25-2.00 M phosphate to RF solutions at pH 7.0 gives rise to RF-HPO4(2-) complex and hence the quenching of 4-36% fluorescence, respectively. This results in the suppression of normal photolysis leading to the formation of LC in favour of photoaddition to yield CDRF. The present study shows the involvement of H2PO4- anions in the base-catalysed degradation of riboflavin by normal photolysis vis-a-vis the involvement of HPO42- anions in photoaddition reactions of riboflavin suggested earlier [M. Schuman Jorns, G. Schollnhammer, P. Hemmerich, Intramolecular addition of the riboflavin side chain. Anion-catalysed neutral photochemistry, Eur. J. Biochem. 57 (1975) 35-48].     

Kinetics and mechanism of the reactions of Au(III) complexes with some biologically relevant molecules

The kinetics of the substitution reactions between the mono-functional Au(III) complexes, [Au(dien)Cl](2+) and [Au(terpy)Cl](2+) (dien = 3-azapentane-1,5-diamine, terpy = 2,2';6',2'-terpyridine) and bi-functional Au(III) complexes, [Au(bipy)Cl(2)](+) and [Au(dach)Cl(2)](+) (bipy = 2.2'-bipyridine, dach = (1R,2R)-1,2-diaminocyclohexane) and biologically relevant ligands such as l-histidine (l-His), inosine (Ino), inosine-5'-monophosphate (5'-IMP) and guanosine-5'-monophosphate (5'-GMP), were studied in detail. All kinetic studies were performed in 25 mM Hepes buffer (pH = 7.2) in the presence of NaCl to prevent the spontaneous hydrolysis of the chloride complexes. The reactions were followed under pseudo-first order conditions as a function of ligand concentration and temperature using stopped-flow UV-vis spectrophotometry. The results showed that the mono-functional complexes react faster than the bi-functional complexes in all studied reactions. The [Au(terpy)Cl](2+) complex is more reactive than the [Au(dien)Cl](2+) complex, which was confirmed by quantum chemical (DFT) calculations. A more than 50% lower activation energy for the terpy than for the dien based complex was found. The bi-functional [Au(bipy)Cl(2)](+) complex is more reactive than the [Au(dach)Cl(2)](+) complex. The reactivity of the studied nucleophiles follows the same order for all studied systems, viz. l-His > 5'-GMP > 5'-IMP > Ino. According to the measured activation parameters, all studied reactions follow an associative substitution mechanism. Quantum chemical calculations (B3LYP/LANL2DZp) suggest that ligand substitution in [Au(terpy)Cl](2+) and [Au(dien)Cl](2+) by imidazole follows an interchange mechanism with a significant degree of associative character. The results demonstrate the strong connection between the reactivity of the complexes toward biologically relevant ligands and their structural and electronic characteristics. Therefore, the binding of gold(III) complexes to 5'-GMP, constituent of DNA, is of particular interest since this interaction is thought to be responsible for their anti-tumour activity.     

The Use of Buffers in the Determination of Fluoride by an Ion-Selective Electrode at Low Concentrations and in the Presence of Aluminum

Abstract

The influence of the composition of buffer solutions on fluoride analyses by the fluoride ion selective electrode was studied. Residual fluoride content of reagents was observed to restrict the use of some buffers and reagents in low-level work. The optimum pH for low-level fluoride determinations was found to be around 5, which can be maintained by a sodium acetate-acetic acid buffer. Of the complexing agents studied, citrate was observed to be the most efficient masking agent for aluminum, but this ability depended strongly on ligand concentration. Citrate was also effective in masking iron (III) and magnesium ions. Tris (hydroxymethyi) aminomethane showed a similar ability to complex aluminum at a pH around 8. However, at this pH the hydroxyde ion interferes in fluoride analysis below 0.1 ppm [fbar].     

Coprecipitation of gold(III) complex ions with manganese(II) hydroxide and their stoichiometric reduction to atomic gold (Au(0)): analysis by Mössbauer spectroscopy and XPS

To elucidate the formation process of precursor of gold-supported manganese dioxide (MnO2), the coprecipitation behavior of [AuCl4-n(OH)n](-) (n=0-4) (Au(III)) complex ions with manganese(II) hydroxide (Mn(OH)2 and the change in their chemical state were examined. The Au(III) complex ions were rapidly and effectively coprecipitated with Mn(OH)(2) at pH 9. According to the M?ssbauer spectra for gold (Au) coprecipitated with Mn(OH)2, below an Au content of 60 wt% in the coprecipitates, all of the coprecipitated Au existed in the atomic state (Au(0)), while, above an Au content of 65 wt%, part of the gold existed in the Au(III) state, and the proportion increased with increasing coprecipitated Au content. Based on the results of X-ray photoelectron spectroscopy, Mn(II) in Mn(OH)2 converted to Mn(IV) in conjunction with coprecipitation of Au(III) complex ions. These results indicate that the rapid stoichiometric reduction of Au(III) to Au(0) is caused by electron transfer from Mn(II) in Mn(OH)2 to the Au(III) complex ion through an Mn-O-Au bond.     

Selective electronalysis of peracetic acid in the presence of a large excess of H2O2 at Au(1 1 1)-like gold electrode

Peracetic acid (PAA) has been selectively electroanalyzed in the presence of a large excess of hydrogen peroxide (H₂O₂), about 500 fold that of PAA, using Au (1 1 1)-like gold electrode in acetate buffer solutions of pH 5.4. Au(1 1 1)-like gold electrode was prepared by a controlled reductive desorption of a previously assembled thiol, typically cysteine, monolayer onto the polycrystalline gold (poly-Au) electrode. Cysteine molecules were selectively removed from the Au(1 1 1) facets of the poly-Au electrode, keeping the other two facets (i.e., Au(1 1 0) and Au(1 0 0)) under the protection of the adsorbed cysteine. It has been found that Au(1 1 1)-like gold electrode positively shifts the reduction peak of PAA, while, fortunately, shifts the reduction peak of H₂O₂ negatively, achieving a large potential separation (around 750 mV) between the two reduction peaks as compared with that (around 450 mV) obtained at the poly-Au electrode. This large potential separation between the two reduction peaks enabled the analysis of PAA in the presence of a large excess of H₂O₂. In addition, the positive shift of the reduction peak of PAA gives the present method a high immunity against the interference of the dissolved oxygen.     

Exthaktiv-Spekthophotometrische Bestimmung Von Rh(III) in Gegenwart Der Platinmetalle,Gold Und Silber Unter Anwendung Von 1-(2-Pyridylazo)-2-Naphthol

Abstract

A spectrophotometric method is described for the determination of 25–150μ;g of rhodium (III) using 1-(2-pyridylazo)-2-naphthol. One milligram of Ir(III) or Ir(IV), 200μ;g Ru(IV), 400μ;g Os(IV), 350μ;g Pt(IV), 5 mg Ag(I), and 100μ;g Au(III) do not interfere. Larger amounts of silver and gold are removed as AgCl and, after reduction with ascorbic acid, Au metal. A modification of the method permits the successive determination of 4–100μ;g of Hh(III) and 50–500μ;g of Pd(II) in a single sample.     

High electrochemiluminescence of a new water-soluble iridium(III) complex for determination of antibiotics

A new water-soluble iridium(III) diimine complex with appended sugar was synthesized and characterized. The electrochemiluminescent behavior of the new complex in aqueous buffer was first studied and the ECL signal was found to be much higher than that of [Ru(bpy)(3)](2+) at a Pt working electrode. Tri-n-propylamine (TPA) and antibiotics were determined by the ECL of the iridium(III) complex in aqueous buffer at the Pt electrode and the method was found to show good sensitivity and reproducibility. The new iridium(III) complex was found to display good solubility in aqueous solution and a strong ECL signal at the Pt electrode, which might open up the possibility of its application in analysis.     

对甲苯磺酸铜及其配合物电化学行为研究(英文)

本文合成了对甲苯磺酸铜,并应用热重(TG)和差示扫描量热法(DSC)进行分析.该铜盐容易脱除全部结晶水,且在空气中不潮解,如与乙醇胺形成等摩尔配合物,则在DMSO和DMF溶剂中能催化1,1′ 联 2 萘酚的氧化,但在H2O或CH3OH溶剂中则不发生反应.此外,还分别研究了该铜盐及其它铜盐与乙醇胺(1∶1)的配合物在DMSO、DMF、CH3OH和H2O中的电化学行为和催化活性.实验表明,铜胺配合物的两步单电子还原过程对催化氧化1,1′ 联 2 萘酚是必要的条件.     

Heterovalent Au(III)-M(I) (M=Cu, Ag, Au) complexes derived from incorporation of [Au(tdt)2]- (tdt = toluene-3,4-dithiolate) with [M2(dppm)2]2+ (dppm = Bis(diphenylphosphino)methane)

Polynuclear heterovalent Au(III)-M(I) (M = Cu, Ag, Au) cluster complexes [Au(III)Cu(I)8(mu-dppm)3(tdt)5]+ (1), [Au(III)3Ag(I)8(mu-dppm)4(tdt)8]+ (2), and [Au(III)Au(I)4(mu-dppm)4(tdt)2]3+ (3) were prepared by reaction of [Au(III)(tdt)2]- (tdt = toluene-3,4-dithiolate) with 2 equiv of [M(I)2(dppm)2]2+ (dppm = bis(diphenylphosphino)methane). Complex 3 originates from incorporation of one [Au(III)(tdt)2]- with two [Au(I)2(dppm)2]2+ components through Au(III)-S-Au(I) linkages. Formation of complexes 1 and 2, however, involves rupture of metal-ligand bonds in the metal components and recombination between the ligands and the metal atoms. The Au(tdt)2 component connects to four M(I) atoms through Au(III)-S-M(I) linkages in syn and anti conformations in complexes 1 (M = Cu) and 3 (M = Au), respectively, but in both syn and anti conformations in complex 2 (M = Ag). The tdt ligand exhibits five types of bonding modes in complexes 1-3, chelating Au(III) or M(I) atoms as well as bridging Au(III)-M(I) or M(I)-M(I) atoms in different orientations. Although complexes 1 and 2 are nonemissive, Au(III)Au(I)(4) complex 3 shows room-temperature luminescence with emission maximum at 555 nm (tau(em) = 3.1 micros) in the solid state and at 570 nm (tau(em) = 1.5 micros) in acetonitrile solution.     

Photoinduced dissolution and redeposition of Au nanoparticles supported on TiO2

Au particles (mean size ca. 3 nm) supported on TiO(2) particles were irradiated by UV light (>300 nm) in aqueous solutions at 278 K. Photo-induced dissolution of Au nanoparticles followed by redeposition occurred in aqueous solutions containing halogen ions. The dissolution of Au nanoparticles yielded a Au(III) complex with a halogen ion; subsequent reduction of the Au(III) complex caused precipitation of larger Au particles on TiO(2).     

Crystallographic, electrochemical, and electronic structure studies of the mononuclear complexes of Au(I)/(II)/(III) with [9]aneS2O ([9]aneS2O = 1-oxa-4,7-dithiacyclononane)

The mononuclear macrocyclic complexes [Au(I)([9]aneS2O)2]BF4 x MeCN 1a, [Au(II)([9]aneS2O)2](BF4)2 x 2 MeCN 2a, and [Au(III)([9]aneS2O)2](ClO4)6(H5O2)(H3O)2 3 ([9]aneS2O = 1-oxa-4,7-dithiacyclononane) have been prepared and structurally characterized by single crystal X-ray crystallography. The oxidation of [Au([9]aneS2O)2](+) to [Au([9]aneS2O)2](2+) involves a significant reorganization of the co-ordination sphere from a distorted tetrahedral geometry in [Au([9]aneS2O)2](+) [Au-S 2.3363(12), 2.3877(12), 2.6630(11), 2.7597(13) A] to a distorted square-planar co-ordination geometry in [Au([9]aneS2O)2](2+). The O-donors in [Au([9]aneS2O)2](2+) occupy the axial positions about the Au(II) center [Au...O = 2.718(2) A] with the S-donors occupying the equatorial plane [Au-S 2.428(8) and 2.484(8) A]. [Au([9]aneS2O)2](3+) shows a co-ordination sphere similar to that of [Au([9]aneS2O)2](2+) but with significantly shorter axial Au...O interactions [2.688(2) A] and equatorial Au-S bond lengths [2.340(4) and 2.355(6) A]. The cyclic voltammogram of 1 in MeCN (0.2 M NBu4PF6, 253 K) at a scan rate of 100 mV s(-1) shows an oxidation process at E(p)(a) = +0.74 V and a reduction process at E(p)(c) = +0.41 V versus Fc(+)/Fc assigned to the two-electron Au(III/I) couple and a second reduction process at E(p)(c) = +0.19 V assigned to the Au(I/0) couple. This electrochemical assignment is confirmed by coulometric and UV-vis spectroelectrochemical measurements. Multifrequency EPR studies of the mononuclear Au(II) complex [Au([9]aneS2O)2](2+) in a fluid solution at X-band and as frozen solutions at L-, S-, X-, K-, and Q-band reveal g(iso) = 2.0182 and A(iso) = -44 x 10(-4) cm(-1); g(xx) = 2.010, g(yy) = 2.006, g(zz) = 2.037; A(xx) = -47 x 10(-4) cm(-1), A(yy) = -47 x 10(-4) cm(-1), A(zz) = -47 x 10(-4) cm(-1); P(xx) = -18 x 10(-4) cm(-1), P(yy) = -10 x 10(-4) cm(-1), and P(zz) = 28 x 10(-4) cm(-1). DFT calculations predict a singly occupied molecular orbital (SOMO) with 27.2% Au 5d(xy) character, consistent with the upper limit derived from the uncertainties in the (197)Au hyperfine parameters. Comparison with [Au([9]aneS3)2](2+) reveals that the nuclear quadrupole parameters, P(ii) (i = x, y, z) are very sensitive to the nature of the Au(II) co-ordination sphere in these macrocyclic complexes. The observed geometries and bond lengths for the cations [Au([9]aneS2O)2](+/2+/3+) reflect the preferred stereochemistries of d(10), d(9), and d(8) metal ions, respectively, with the higher oxidation state centers being generated at higher anodic potentials compared to the related complexes [Au([9]aneS3)2](+/2+/3+).     

Synthesis, structures, and electrochemistry of gold(III) ethylenediamine complexes and interactions with guanosine 5'-monophosphate

[Au(en)Cl(2)]Cl.2H(2)O, where en = ethylenediamine (1,2-diaminoethane), has been synthesized, and its structure has been solved for the first time by the single-crystal X-ray diffraction method. The complex has square-planar geometry about Au(III), and the anionic Cl- is located in the apical position and at a distance of 3.3033(10) A compared to 2.2811(9) and 2.2836(11) A for the coordinated Cl-. [Au(en)Cl2]Cl.2H2O belongs to the space group Pbca with a = 11.5610(15) A, b = 12.6399(17) A, c = 13.2156(17) A, alpha = beta = gamma = 90 degrees , and Z = 8. Bond lengths of Au-N are 2.03 A. [Au(en)Cl2]Cl.2H2O is less thermally stable than [Au(en)2]Cl3 because of the replacement of two Cl ligands by a second en ligand in the latter. Cyclic voltammetry shows that the formal potential of Au(III)/Au(0) becomes more negative in the series [AuCl4]-, [Au(en)Cl2]+, and [Au(en)2]3+. 1H, 13C, and 31P NMR reveal that in an aqueous solution [Au(en)Cl2]+ bonds to guanosine 5'-monophosphate, 5'-GMP (1:1 mole ratio), via N7, although the stability is not very high. NMR data also indicate that N7-O6 or N7-phosphate 5'-GMP chelation, as found in some gold(III) nucleotide complexes, is not present. The gold(III) complex undergoes hydrolysis at pH >2.5-3.0 and, therefore, N1 coordination to 5'-GMP is not observed. No direct coordination between 5'-GMP and [Au(en)2]Cl3 is observed.     

Voltammetric sensing of phosphoproteins using a gallium(III) acetylacetonate-modified carbon paste electrode

The voltammetric detection of phosphoproteins was developed using a gallium(III) acetylacetonate-modified carbon paste electrode. Because phosphate groups of the protein interacted with the gallium(III) ion, the protein was accumulated on the electrode surface. A hexaammine ruthenium(III) ion, which combined with the functional groups, was used to monitor the interaction. When phosvitin and hexaammine ruthenium(III) ions were incubated in 0.1 M acetate buffer (pH 3.2), a reduction peak of hexaammine ruthenium(III) ion at the electrode decreased as the concentration of the protein increased. In contrast, an increase in the peak current was observed with a plain carbon paste electrode. These results were caused by a competitive reaction of the phosphate groups with the hexaammine ruthenium(III) and gallium(III) ions. In the presence of α-, β- and κ-caseins, the electrode response decreased due to the order of the numbers of phosphate groups. This method could be applied to the sensing of phosphoproteins at the 10(-10) M level.     

Comparative electrochemical study of new self-assembled monolayers of 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol and 2-{[(2-sulfanylphenyl)imino]methyl}phenol for determination of dopamine in the presence of high concentration of ascorbic acid and uric acid

The comparative electrochemical behavior of self-assembled monolayers of two Schiff's bases, 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol (FMAB) and 2-{[(2-sulfanylphenyl)imino]methyl}phenol (SIMP) on a bare gold electrode (Au FMAB SAM-modified electrode and Au SIMP SAM-modified electrode, respectively), was investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy in a 0.1 mol L(-1) KCl solution that contains 5.0 × 10(-3) mol L(-1) [Fe(CN)(6)](3-/4-). The results revealed that the modified electrodes showed an electrocatalytic activity toward the anodic oxidation of dopamine by a marked enhancement in the current response and lower overpotential (60 and 90 mV for the Au FMAB and Au SIMP SAM-modified electrodes, respectively) in phosphate buffer solution at pH 6.0. The Au SIMP SAM-modified electrode was applied successfully to the determination of dopamine in the presence of a high concentration of ascorbic acid. Selective detection was realized in total elimination of ascorbic acid response-a method different from the ones based on the potential separations. The detection limit of dopamine was 5.0 × 10(-8) mol L(-1) in a linear range from 1.0 × 10(-6) to 1.2 × 10(-4) mol L(-1) in the presence of 1.0 × 10(-3) mol L(-1) ascorbic acid. The interference studies also showed that the Au SIMP SAM-modified electrode exhibited good selectivity in the presence of a large excess of uric acid and could be employed for the determination of dopamine in pharmaceutical formulations, plasma samples and human urine with adequate selectivity and precision.