Elastic and electronic properties of YNi2B2C under pressure from first principles

The elastic and electronic structure properties of YNi₂B₂C under pressure are investigated by performing the generalized gradient approximation (GGA) and local density approximation (LDA) correction scheme in the frame of density functional theory (DFT). The pressure dependences of the normalized lattice parameters a/a₀ and c/c₀, the ratio c/a, and the normalized primitive volume V/V₀ of YNi₂B₂C are also obtained. The lattice constants and bulk modulus obtained are in agreement with the available experimental and other theoretical data. We have also studied the pressure dependences of elastic properties. It is found that, as pressure increases, the elastic constants C₁₁, C₃₃, C₆₆, C₁₂, and C₁₃ increase, the variation of elastic constant C₄₄ is not obvious. Moreover, our compressional and shear wave velocities V_L=6.99 km/s and V_S=3.67 km/s as well as the Debye temperature Θ=549.7 K at 0 GPa compare favorably with the available experimental data. The pressure dependences of band structures, energy gap and density of states are also investigated.     

Ab initio calculations on the structural and lattice dynamical properties of TmX (X=As,P) compounds

The structural and lattice dynamical properties of TmX (X=As, P) compounds were investigated using normconserving pseudopotentials within the generalized gradient approximation correction (GGA) of Perdew–Burke–Ernzerhof (PBE) in the framework of density functional theory (DFT). The structural parameters (a₀, B, B′, E_coh) were determined through total energy and interatomic force minimization and the overall agreement was found to be good. The pressure dependence of the ratios of normalized lattice parameters a/a₀, normalized volume V/V₀, bulk modulus, elastic constants, Zener anisotropy factor, Poisson's ratio, Young's modulus, shear modulus, and the brittleness were presented and discussed. The thermodynamical properties such as thermal expansion, heat capacity, Debye temperature, and Grüneisen parameter were calculated employing the quasi-harmonic Debye model at different temperatures (0–1000 K) and pressures (0–30 GPa). The phonon dispersion curves and corresponding density of states (DOS) of TmX (X=As, P) were also obtained, and the salient results were interpreted.     

First-principles calculations of structural and thermodynamic properties of BeB2 compound

The lattice parameter bulk modulus and pressure derivative of BeB2 are calculated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of density function theory. The calculated results agree well with the average experimental data and other theoretical results. Through the quasi-harmonic Debye model, the dependences of the normalized lattice parameters a/ao, c/c0 and the normalized primitive cell volume V/Vo on pressure P, the variation of the thermal expansion coefficient ~ with pressure P and temperature T, as well as the dependences of the heat capacity Cv on pressure P and temperature T are obtained systematically.     

Structural and thermodynamic properties of AlB2 compound

We employ a first-principles plane wave method with the relativistic analytic pseudopotential of Hartwigsen, Goedecker and Hutter (HGH) scheme in the frame of DFT to calculate the equilibrium lattice parameters and the thermodynamic properties of AlB₂ compound with hcp structure. The obtained lattice parameters are in good agreement with the available experimental data and those calculated by others. Through the quasi-harmonic Debye model, obtained successfully are the dependences of the normalized lattice parameters a/a₀ and c/c₀ on pressure P, the normalized primitive cell volume V/V₀ on pressure P, the variation of the thermal expansion α with pressure P and temperature T, as well as the Debye temperature \Theta_D and the heat capacity C_V on pressure P and temperature T.     

First-principles study of structural and thermodynamic properties of osmium

We employ the first-principles plane wave pseudopotential density functional theory method to calculate the equilibrium lattice parameters of osmium and the thermodynamic properties of hcp structure osmium. The obtained lattice parameters are in good agreement with the experimental data investigated up to 58.2 GPa using radial X-ray diffraction (RXRD) together with lattice strain theory in a diamond-anvil cell and the available theoretical data of others. Through the quasi-harmonic Debye model, the dependencies of the normalized lattice parameters a/a₀ and c/c₀ on pressure P, the normalized primitive volume V/V₀ on pressure P, the Debye temperature Θ_D and the heat capacity C_V on pressure P and temperature T, as well as the variation of the thermal expansion α with temperature and pressure are obtained successfully.     

Structure and dielectric properties of Bi6 − x Sr x Ti2 − x Nb2 + x O18 (x = 0–2) solid solutions

The structural and electrophysical characteristics of a series of solid solutions of layered perovs-kite-like oxides Bi_{6 ? x} Sr _x Ti_{2 ? x} Nb_{2 + x} O₁₈ (x = 0, 0.25, 0.5, 1.0, 1.5, 2.0) have been studied. The temperature dependences of the relative permittivity ?/?₀(T) and dielectric loss tangent tanδ have been measured. The dependences of the maximum of the permittivity ?/?₀, Curie temperature T _C, lattice parameters, and the unit cell volume on x have been obtained. The structural parameter a, which corresponds to the polar direction, and the value of the orthorhombic distortion of the unit cell have been found to demonstrate noticeable negative deviations from the Vegard’s law. It has been established that the variations of the orthorhombic distortion correlate with the variations of the permittivity maximum; however, they do not markedly influence the Curie temperature that varies linearly over entire range of changes in x.     

Pressure-dependent structure,mechanical and thermodynamic properties of tetragonal AsTiZr arsenide: A density functional theory study

Recent discoveries of the novel properties of arsenides prompt us to theoretically predict the tetragonal AsTiZr ternary compound under pressure, in order to exploit new functional materials. The structure, elastic and thermodynamic properties of AsTiZr have been investigated under various pressures, based on density functional theory (DFT). For the sake of consistency, the approach of the generalized gradient approximation (GGA) of Perdew–Burke–Ernzerhof (PBE) was used. The calculated structural data at zero pressure are in good agreement with previous report. The dependence of relative changes of lattice parameters (a₀ and c₀) and volume V₀, elastic constants, bulk, shear and Young's modulus, and Debye temperature on pressure has been investigated. The thermodynamic properties like heat capacity C, enthalpy E, free energy F and entropy S with pressure are successfully obtained and discussed.     

Influence of rare earth Ce on structural, electrical and magnetic properties of Sr based W-type hexagonal ferrites

A series of single phase W-type Sr_3−xCe_xFe₁₆O₂₇ (x=0, 0.02, 0.04, 0.06, 0.08, 0.10) hexagonal ferrites prepared by the Sol-Gel method was sintered at 1050 °C for 5 h. The X-ray diffraction analysis reveals that all the samples belong to the family of W-type hexagonal ferrites. The c/a ratio falls in the range of W-type hexagonal ferrites. The grain size was measured by SEM varies from 0.7684 to 0.4366 μm which shows that the Ce³⁺ substituted samples have smaller grain size than pure ferrite Sr₃Fe₁₆O₂₇ which results from the difference in ionic radii of Ce³⁺ (1.034 Å) and Sr²⁺ (1.12 Å). The room temperature resistivity of the present samples varies from 6.5×10⁸ to 272×10⁸ Ω-cm. The coercivity increases from 1370 to 1993 Oe which is consistent with the decrease in grain size. The coercivity values indicate that the present samples fall in the range of hard ferrites. The large value of H_c may be due to domain wall pinning at the grain boundaries.     

Theoretical investigations of structural, elastic and thermodynamic properties for PtN2 under high pressure

We have investigated structural and elastic properties of PtN₂ under high pressures using norm-conserving pseudopotentials within the local density approximation (LDA) in the frame of density-functional theory. Calculated results of PtN₂ are in agreement with experimental and available theoretical values. The a/a₀, V/V₀, ductility/brittleness, elastic constants C_ij, shear modulus C′, bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio σ and anisotropy factor A as a function of applied pressure are presented. Through the quasi-harmonic Debye model, we also study thermodynamic properties of PtN₂. The thermal expansion versus temperature and pressure, thermodynamic parameters X (X=Debye temperature or specific heat) with varying pressure P, and heat capacity of PtN₂ at various pressures and temperatures are estimated.     

Structural and elastic properties of LaTiO3 under pressure

We investigate the structural and elastic properties of LaTiO₃ by the plane-wave pseudopotential density functional theory method. The lattice constants, bulk modulus and its pressure derivative are obtained. These properties in the equilibrium phase are well consistent with the available experimental data. The pressure dependence of the elastic constants, ductility, mechanical stabilities, sound velocity and Debye temperatures are investigated for the first time. From the ratio G/B, we conclude that LaTiO₃ is ductile at 0 GPa and becomes more ductile at high pressure. In addition, the anisotropy factors for every symmetry plane and axis as well as linear bulk modulus at diverse pressures have been obtained.     

Pressure effects on structural,elastic and electronic properties of BaZnO2: first-principles study

The structural, elastic and electronic properties of BaZnO₂ under pressure are investigated by the plane wave pseudopotential density functional theory (DFT). The calculated lattice parameters and unit cell volume of BaZnO₂ at the ground state are in good agreement with the available experimental data and other theoretical data. The pressure dependences of elastic constants C_ij, bulk modulus B, shear modulus G, B/G, Poisson’ s ratio σ, Debye temperature Θ and aggregate acoustic velocities V_P and V_S are systematically investigated. It is shown that BaZnO₂ maintains ductile properties under the applied pressures. Analysis for the calculated elastic constants has been made to reveal the mechanical stability and mechanical anisotropy of BaZnO₂. At the ground state, the calculated compressional and shear wave velocities are 8.26 km/s and 1.81 km/s, respectively, and the Debye temperature Θ is 240.8 K. The pressure dependences of the density of states and the bonding property of BaZnO₂ are also investigated.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

The structure and optical properties of AlN nanocrystals prepared by Schlenk techniques at atmospheric pressure and low temperature

AlN nanocrystals were prepared in organic solvent at atmospheric pressure and low temperature by the Schlenk technique. Both hexagonal and cubic AlN nanocrystals were obtained. The hexagonal nano-AlN powder possessed a wurtzite structure with a=3.124 Å, c=5.024 Å, the average grain size was about 2 nm. The lattice constant of the cubic nano-AlN was a=9.171 Å, the average grain size was about 4 nm. The structural and optical properties of the obtained AlN were analyzed. The emission related to deep-level defects was investigated by using temperature-dependent photoluminescence.     

Thermal expansion op NbSe2 and TaS2

The lattice parameters a₀ and c₀ of the hexagonal 2H polytype of NbSe₂; have been measured over the temperature range 156–478 K for a₀, and 138–482 K for c₀. The lattice parameter c₀ of the hexagonal 2H polytype of TaS₂ has been measured between 151 and 472 K. The lattice parameters a₀ and c₀ for the octahedral 1T polytype of TaS₂ been measured between 165 and 488 K. Over these temperature ranges, the following average coefficients of thermal expansion have been measured; 2H-NbSe₂, 6.6 × 10^?6K^?1 along the a-axis, 19.9 × 10^?6 K^?1 along the c-axis; 2H-TaS₂, 15.6 × 10^?6 K^?1 along the c-axis; IT-TaS₂, 12.7 × 10^?6 K^?1 along the c-axis. The parameter c₀ of 1T-TaS₂ undergoes two transitions which may be explained in terms of charge density waves.     

Enhanced superconducting properties of Eu2O3-doped MgB2

Bulk polycrystalline samples of Eu₂O₃-doped MgB₂ have been synthesized by a standard solid state reaction route and their structural and superconducting properties have been investigated. As a function of Eu₂O₃ content we have found a significant increase in the critical current density (J_c) and the irreversibility field (H_irr) in the magnetic field range 0–6 T. The XRD results reveal the presence of MgO and EuB₆ secondary phases along with the main hexagonal phase of MgB₂. The strain values and the lattice distortions have been found to increase almost linearly with the nominal Eu₂O₃ content. The observed significant improvement in J_c(H) and H_irr in the Eu₂O₃-doped MgB₂ samples, thus is mainly attributed to the lattice distortions introduced by Eu₂O₃ doping.     

Study of elastic properties of CeO2 by statistical moment method

The purpose of the present paper is to investigate the temperature and pressure dependences of the elastic properties of cerium dioxide using the statistical moment method (SMM). The equation of states of bulk CeO₂ is derived from the Helmholtz free energy, and the pressure dependences of the elastic moduli like the bulk modulus, B_T, shear modulus, G, Young’s modulus, E, and elastic constants (C11, C12, and C44) are presented taking into account the anharmonicity effects of the thermal lattice vibrations. In the present study, the influence of temperature and pressure on the elastic moduli and elastic constants of CeO₂ has also been studied, using three different interatomic potentials. We compare the results of the present calculations with those of the previous theoretical calculations as well as with the available experiments.     

Thermodynamic properties of cubic ZrC under high pressure from first-principles calculations

The elastic and thermodynamic properties of Zirconium carbide (ZrC) are investigated by ab initio plane-wave pseudopotential density function theory method. The obtained lattice constant, elastic constant and bulk modulus B are consistent with the experimental and theoretical data. Through the quasi-harmonic Debye model, the dependences of the normalized volume V/V ₀ and the bulk modulus B on pressure P, as well as the specific heat C _V on the temperature T are obtained successfully. The relationships of the thermal expansion α with temperature and pressure are also investigated, which indicate the temperature hardly has any effect on the thermal expansion α at high pressure. Supported by the National Natural Science Foundation of China (Grant No. 10776022)     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

Enhancement of red spectral emission intensity of Y3Al5O12:Ce phosphor via Pr co-doping and Tb substitution for the application to white LEDs

We have enhanced color-rendering property of a blue light emitting diode (LED) pumped white LED with yellow emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce) phosphor using addition of Pr and Tb as a co-activator and host lattice element, respectively. Pr³⁺ addition to YAG:Ce phosphor resulted in sharp emission peak at about 610 nm through ¹D₂→³H₄ transition. And when Tb³⁺ substituted Y³⁺ sites, Ce³⁺ emission band shifted to a longer wavelength due to larger crystal field splitting. Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and (Y_1−xTb_x)₃Al₅O₁₂:Ce³⁺ phosphors were coated on blue LEDs to fabricate white LEDs, respectively, and their color-rendering indices (CRIs, R_a) were measured. As a consequence of the addition of Pr³⁺ or Tb³⁺, CRI of the white LEDs improved to be R_a=83 and 80, respectively. Especially, blue LED pumped (Y_0.2Tb_0.8)₃Al₅O₁₂:Ce³⁺ white LED showed both strong luminescence and high color-rendering property.