Controlled drug release from bifunctionalized mesoporous silica

Serial of trimethylsilyl-carboxyl bifunctionalized SBA-15 (TMS/COOH/SBA-15) have been studied as carriers for controlled release of drug famotidine (Famo). To load Famo with large capacity, SBA-15 with high content of carboxyl groups was successfully synthesized by one-pot synthesis under the assistance of KCl. The mesostructure of carboxyl functionalized SBA-15 (COOH/SBA-15) could still be kept even though the content of carboxyl groups was up to 57.2%. Increasing carboxyl content could effectively enhance the loading capacity of Famo. Compared with pure SBA-15, into which Famo could be hardly adsorbed, the largest drug loading capacity of COOH/SBA-15 could achieve 396.9 mg/g. The release of Famo from mesoporous silica was studied in simulated intestine fluid (SIF, pH=7.4). For COOH/SBA-15, the release rate of Famo decreased with narrowing pore size. After grafting TMS groups on the surface of COOH/SBA-15 with hexamethyldisilazane, the release of Famo was greatly delayed with the increasing content of TMS groups.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Dual pH and glucose sensitive gel gated mesoporous silica nanoparticles for drug delivery

A low-molecular-weight gel with dual pH and glucose sensitivity was designed as the gate controller for mesoporous silica nanoparticles (MSNs) to fabricate a smart drug delivery system. The smart gel caped MSNs could control the antidiabetic drug release via the detection of glucose and pH levels.     

A controlled release of ibuprofen by systematically tailoring the morphology of mesoporous silica materials

A series of mesoporous silica materials with similar pore sizes, different morphologies and variable pore geometries were prepared systematically. In order to control drug release, ibuprofen was employed as a model drug and the influence of morphology and pore geometry of mesoporous silica on drug release profiles was extensively studied. The mesoporous silica and drug-loaded samples were characterized by X-ray diffraction, Fourier transform IR spectroscopy, N₂ adsorption and desorption, scanning electron microscopy, and transmission electron microscopy. It was found that the drug-loading amount was directly correlated to the Brunauer-Emmett-Teller surface area, pore geometry, and pore volume; while the drug release profiles could be controlled by tailoring the morphologies of mesoporous silica carriers.     

Synthesis of hierarchical sieve-like mesoporous silica nanoparticle aggregates via centrifugal method for drug delivery system

A facile approach towards the scaled-up synthesis of a novel hierarchical sieve-like structure of mesoporous silica nanoparticle aggregates (hsMSNA) with high drug encapsulation efficiency and sustained release behaviors acting as a drug delivery system in the field of nanomedicine.     

Functionalized mesoporous silica materials for controlled drug delivery

In the past decade, non-invasive and biocompatible mesoporous silica materials as efficient drug delivery systems have attracted special attention. Great progress in structure control and functionalization (magnetism and luminescence) design has been achieved for biotechnological and biomedical applications. This review highlights the most recent research progress on silica-based controlled drug delivery systems, including: (i) pure mesoporous silica sustained-release systems, (ii) magnetism and/or luminescence functionalized mesoporous silica systems which integrate targeting and tracking abilities of drug molecules, and (iii) stimuli-responsive controlled release systems which are able to respond to environmental changes, such as pH, redox potential, temperature, photoirradiation, and biomolecules. Although encouraging and potential developments have been achieved, design and mass production of novel multifunctional carriers, some practical biological application, such as biodistribution, the acute and chronic toxicities, long-term stability, circulation properties and targeting efficacy in vivo are still challenging.     

Construction of a pH-responsive drug delivery platform based on the hybrid of mesoporous silica and chitosan

Mesoporous silica nanoparticles (MSN) have been widely used for drug delivery due to their large specific surface area and excellent biocompatibility. However, the mesoporous structure of MSN would lead to the inevitable “premature release” of the drugs, and therefore the modification of MSN for controlled delivery seems to be a necessary step. Herein, chitosan (CS) was used for the surface functionalization of MSN via amidation reaction, and the introduced CS could function as a “gatekeeper” and the drug of methotrexate (MTX) might be encapsulated in the mesopores of MSN. As a result, the “premature release” of the encapsulated MTX could be effectively circumvented with the aid of the CS cap. More importantly, the drug delivery from the hybrid of MSN and CS (MSN/CS) can be endowed with pH-sensitivity by the introduction of CS because the amide bonding between CS and MSN is highly pH-sensitive. The cumulative release of MTX from the MSN/CS is more pronounced at pH 5.0 (80.86%) than those at pH 6.8 (40.46%) and pH 7.4 (18.25%).     

Functionalized mesoporous silica nanoparticles templated by pyridinium ionic liquid for hydrophilic and hydrophobic drug release application

Chemotherapy is the most common treatment for all cancer patients but this treatment poses many side effects due to lack of drug’s selectivity. To overcome this problem, utilizing a better and more effective delivery agent is the solution. Mesoporous silica nanoparticles (MSNs) emerged as a promising platform in development of drug delivery agent. This is due to its desirable properties such as tunable pores, large surface area, good biocompatibility and easy functionalization. Furthermore, these properties can be tuned through the utilization of alternative template such as pyridinium ionic liquid. Besides, by employing surface functionalization, the effectiveness of MSNs as drug delivery agent may also increase. This work reported the usage of 1-hexadecylpyridinium bromide ionic liquid as template for MSNs production and the surface of MSNs was then further functionalized via post – grafting method in order to obtain MSN – NH₂, MSN – SH and MSN – COOH as drug carrier, respectively. These functionalized MSNs were then used to study the drug loading and drug release of hydrophilic drug, gemcitabine and hydrophobic drug, quercetin. For quercetin, MSN-NH₂ had the highest drug loading percentage (72%) and slowest release (14%) in 48 h while for gemcitabine, it was found that MSN-COOH had the highest drug loading percentage (45%) and slowest release (15%) in 48 h. Based on the results, it is suggested that mesoporous silica nanoparticle with surface functionalization has suitable properties for controlled drug release which gives constant release behavior over a period of time to avoid repeated administration of drug where the drug is administered at a fixed dosage and regular time interval.     

Synthesis and characterization of a pH responsive and mucoadhesive drug delivery system for the controlled release application of anti-cancerous drug

In this work a novel pH sensitive composite, polyacrylamide grafted succinyl chitosan intercalated bentonite (AAm-g-NB/SC) was prepared as a drug carrier system for the controlled delivery of paclitaxel. Characterization of the drug delivery system was carried out using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal analysis etc. The equilibrium swelling behaviour of the composite was studied and the result showed a maximum at pH 7.4. The in vitro drug release study of paclitaxel indicated that about 15.6% of drug release was found to be occurred at pH 1.2 within 16 h, whereas about 82.5% of drug release was occurred at the intestinal pH condition of 7.4. In vitro biocompatibility study was performed and the result showed good biocompatibility of the composite in the concentration range 6.25–100 µg/mL. The cytotoxicity assay was carried out in cancerous cell line of Human colorectal Adenocarcinoma. Mucous glycoprotein assay study showed that the drug delivery system having good apparent adhering property towards mucin. The investigation indicated that paclitaxel, an anticancer drug can be successfully entrapped in the AAm-g-NB/SC composite for the controlled and targeted delivery for colorectal cancer therapy.     

A tri-responsive dual-drug delivery system based on mesoporous silica nanoparticles@polydopamine@graphene oxide nanosheets for chemo-photothermal therapy of osteosarcoma

A pH, redox and near infrared (NIR) irradiation tri-responsive dual-drug delivery system (DDDS) is constructed for the treatment of osteosarcoma. Methotrexate (MTX) is encapsulated into the mesoporous silica nanoparticles (MSNs) by polydopamine (PDA), and then the core–shell structured MTX/MSNs@PDA is embedded into the graphene oxide (GO) nanosheets to further enhance the photothermal conversion capability of this system. The resultant MTX/MSNs@PDA@GO is co-encapsulated with naringin (Nar) into the hydrogels of carboxymethyl cellulose (CMC) and cystamine (Cys) generated through amidation reaction. The disulfide linkage (–S–S–) in Cys can be reduced to sulphydryl groups (–SH) by glutathione (GSH), resulting in the degradation of the hydrogels; on the other hand, both PDA and the amide linkage between CMC and Cys are pH-sensitive. Therefore, the constructed DDDS can be used for pH-, redox- and NIR irradiation-responsive delivery of MTX and Nar. Finally, the validity of the developed DDDS is evaluated by cytotoxicity test.     

Synthesis and characterization of thermosensitive copolymers for oral controlled drug delivery

Poly(N-isopropylacrylamide) (PNIPAAm) copolymers were synthesized in order to obtain co-polymers with a phase transition temperature slightly higher than the physiological temperature, as required by a new drug delivery concept described in a previous paper. Six hydrophilic comonomers bringing about a rise of the phase transition temperature were evaluated. The synthesized copolymers were characterized and the influence of the type and of the amount of the used comonomer on the phase transition temperature was discussed. Among the comonomers, Acrylamide (AAm), N-methyl-N-vinylacetamide (MVA), N-vinylacetamide (NVA), and N-vinyl-2-pyrrolidinone (VPL) were found to be capable to raise the phase transition temperature to a value slightly higher than 37 °C and to have adequate phase transition behavior. The selected four copolymers were subjected to an additional purification step that should make them fit to use as a controlling agent in drug delivery systems.     

Near infra-red light responsive carbon nanotubes@mesoporous silica for photothermia and drug delivery to cancer cells

Among smart activable nanomaterials used for nanomedicine applications, carbon-based nanocomposites are well known to ensure phototherapy while their use for controlled drug delivery is still rarely investigated. In this work, original hybrid mesoporous silica (MS)–coated carbon nanotubes (CNTs) nanoplatforms have been designed to provide phototherapy combined with drug release mediated by NIR laser excitation. The responsive CNT@MS are chemically modified with original isobutyramide (IBAM) grafts acting as non-covalent binders, which ensure a very high drug loading capacity (≥to 80 wt%) of the antitumor drug doxorubicin (DOX) as well as the final adsorption of a human serum albumin (HSA) shell as biocompatible interface and drug gate-keeping. The drug is demonstrated to unbind from the nanocomposite only upon photothermal excitation and to release in the solution. Such smart platforms are further shown to deliver drug upon several pulsatile NIR excitations with controlled temperature profiles. Regarding antitumor action, we demonstrate here that the NIR light induced photothermic effect from the nanocomposites is the main effect accounting for cancer cell toxicity and that DOX delivery mediated by the NIR light brings an additional toxicity allowing a synergistic effect to efficiently kill tumor cells. Finally, when our nanocomposites are embedded within a hydrogel mimicking extracellular matrix, the resulting smart responsive scaffolds efficiently release DOX upon NIR light to the cells localized above the composite hydrogel. These results demonstrate that such nanocomposites are highly promising as new components of implantable antitumor scaffolds that are able to respond to external stimuli in time and location for a better disease management.     

A multifunctional nanocarrier based on nanogated mesoporous silica for enhanced tumor-specific uptake and intracellular delivery

A multifunctional drug delivery system based on MCM-41-type mesoporous silica nanoparticles is described that behaves as if nanogates were covalently attached to the outlets of the mesopores through a highly acid-sensitive benzoic-imine linker. Tumor-specific uptake and intracellular delivery results from the pH-dependent progressive hydrolysis of the benzoic-imine linkage that starts at tumor extracellular pH = 6.8 and increases with decreasing pH. The cleavage of the benzoic-imine bond leads to the removal of the polypseudorotaxane caps and subsequent release of the payload drugs at tumor sites. At the same time, the carrier surface becomes positively charged, which further facilitates cellular uptake of the nanocarriers, thus offering a tremendous potential for targeted tumor therapy.     

DNA origami nanostructures for controlled therapeutic drug delivery

DNA nanostructures are emerging as a versatile platform for controlled drug delivery as a result of recent progress in production yield and strategies to obtain prolonged stability in biological environments. The construction of nanostructures from this unique biomaterial provides unparalleled control over structural and functional parameters. Recent applications of DNA origami-based nanocarriers for therapeutic drug delivery in preclinical phases highlight them as promising alternatives to conventional nanomaterials, as they benefit from the inherent favorable properties of DNA including biocompatibility and precise spatial addressability. By incorporating targeting aptamers and responsive properties into the nanocarrier design, more selective DNA origami-based nanocarriers are successfully prepared. On the other hand, current systems remain poorly understood in terms of biodistribution, final fate, and controlled drug release. As such, advances are needed to translate this material platform in its full potential for therapeutic applications.     

Temperature-sensitive polypeptide brushes-coated mesoporous silica nanoparticles for dual-responsive drug release

A biopolymer-inorganic hybrid system (MSN@PBLGF) is designed and fabricated from mesoporous silica nanoparticles (MSNs) and folic acid (FA)-terminated temperature-sensitive synthetic polypeptide, i.e., poly(γ-benzyl-l-glutamate) (PBLG) derivative, through a thiol-disulfide exchange reaction, where MSNs with high drug loading capacity serve as drug nanocarriers and the biocompatible PBLG biopolymer brushes installed on MSN surface through disulfide bonds endow the system with tumor-specific recognition ability and GSH/temperature dual-stimuli responsiveness. Controlled drug release experiments indicate that DOX can be tightly hosted in the system with limited premature release, but efficiently released in response to an increased concentration of GSH and/or an elevated temperature. Intracellular experiments demonstrate that the DOX-loaded MSN@PBLGF nanohybrid shows outstanding cellular uptake and cell-growth inhibition effects on human lung cancer cell line A549 in comparison with healthy human cells such as hepatocyte cells LO2.     

Smart polymer grafted silica based drug delivery systems

Smart polymers are a special class of polymers, which respond to the various external stimuli by changing their properties. Recent developments in synthetic polymer chemistry have provided the possibility of designing and synthesis of various new stimuli-responsive polymers. These stimuli-responsive polymers can be used to prepare smart drug delivery systems (DDS) by grafting them on various nanomaterials. The main aim of this review is to present collective information on various stimuli-responsive polymers grafted on silica nanoparticles for the preparation of smart DDS. The stimuli covered are pH, temperature, redox, reactive oxygen species (ROS), glucose concentration, enzymes, magnetic field, and so forth. The structures of various stimuli-responsive polymers are shown with their relevance to the preparation of smart DDS. The crucial roles of macromolecular design and synthesis of smart polymers in the development of stimuli-responsive DDS are discussed with examples from literature and the challenges that still exist in this area of research are presented.     

Electrospinning preparation and drug delivery properties of Eu/Tb doped mesoporous bioactive glass nanofibers

Luminescent Eu³⁺/Tb³⁺ doped mesoporous bioactive glass nanofibers (MBGNFs) with average diameter of 100-120 nm were fabricated by electrospinning method. Pluronic P123 and N-cetyltrimethylammonium bromide (CTAB) were used as co-surfactants to generate porous structure of the nanofibers. N₂ adsorption-desorption measurement reveals that the MBGNF:Eu³⁺ have a surface area of 188 m² g⁻¹, a pore volume of 0.246 cm³ g⁻¹ and average pore size of 4.17 nm, and the MBGNF:Tb³⁺ have a surface area of 171 m² g⁻¹, a pore volume of 0.186 cm³ g⁻¹ and average pore size of 3.65 nm. Photoluminescence measurements reveal that the MBGNF:Eu³⁺ show strong red emission dominated by the ⁵D₀ → ⁷F₂ transition of Eu³⁺ at 614 nm with a lifetime of 1.356 ms, and MBGNF:Tb³⁺ show strong green emission dominated by the ⁵D₄ → ⁷F₅ transition of Tb³⁺ at 544 nm with a lifetime of 1.982 ms. The biocompatibility tests on L929 fibroblast cells using MTT assay reveal low cytotoxicity of MBGNF. These luminescent nanofibers show sustained release properties for ibuprofen (IBU) in vitro. The emission intensities of Eu³⁺ in the drug delivery system vary with the released amount of IBU, thus making the drug release be easily tracked and monitored by the change of the luminescence intensity.     

Novel drug delivery system of hollow mesoporous silica nanocapsules with thin shells: preparation and fluorescein isothiocyanate (FITC) release kinetics

Core-shell nanoparticles of Au@silica with a diameter of approximate 45–60 nm and wall thickness in range of 3–10 nm were synthesized by using 40 and 50 nm gold nanoparticles as the templates. The mesoporous particles are regulated by 3-aminopropyltrimethoxysilane addition. Hollow mesoporous silica nanocapsules (HMSNs) were prepared by using sodium cyanide to dissolve the gold cores. The characterization of Au@silica and HMSNs by transmission electronic microscope indicated that the silica shells were uniform and smooth, and also the porosity was proved by fluorescein isothiocyanate (FITC) release experiments. The ratio of hollow core to HMSNs is more than 70%. HMSNs were subsequently used as drug carrier to investigate FITC (as a model drug) release behaviors in vitro. Fluorescent spectrometry was performed to determine the release kinetics from the HMSNs. The release profiles are significantly different as compared with the control (free FITC), which show that HMSNs are good drug carriers to control drug release, and have high potential in therapeutic drugs delivery in future applications.