Fabrication and characterization of three-dimensionally ordered macroporous niobium oxide

Three-dimensionally ordered macroporous (3-DOM) niobium oxide was fabricated by aqueous organic gel method through the interstitial spaces between polystyrene spheres assembled on glass substrates. Freshly precipitated hydrous niobium oxide (Nb₂O₅·nH₂O), which was prepared starting from Nb₂O₅, was used in combination with citric acid in an aqueous solution and then was transferred as a niobium source to synthesize 3-DOM Nb₂O₅. The morphologies of porous Nb₂O₅ were characterized by scanning electron microscope (SEM). The thermal decomposition and phase composition of 3-DOM Nb₂O₅ were investigated by Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric–differential thermal analysis (TG–DTA), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).     

三维有序大孔钙钛矿型氧化物LaFeO3的合成及甲烷化学链重整性能

采用无皂乳液聚合法制备了聚苯乙烯(PS)聚合物微球,并采用胶晶模板法制备了三维有序大孔3DOM LaFeO₃钙钛矿型氧化物.通过扫描电镜、X射线衍射和傅里叶变换红外光谱等手段对氧化物的性能进行了表征.利用程序升温还原和多次氧化还原循环反应评价了氧化物的反应性,并在固定床反应器上研究了其甲烷氧化性能.结果表明,与离心法和蒸发法相比,垂直沉积法获得的PS微球模板排列更均匀有序;前驱物溶剂及浓度对最终的三维有序大孔材料的结构有显著影响,利用乙醇为前驱物溶剂所制备的样品比利用乙烯为溶剂的样品具有更好的三维有序大孔结构,前驱物乙醇溶液浓度在1.0 mol/L为宜.甲烷氧化实验表明,3DOM-LaFeO₃钙钛矿型氧化物中存在两种氧物种:表面吸附氧和体相晶格氧.表面吸附氧主要在反应初期将甲烷完全氧化为CO₂和水蒸汽,而体相晶格氧主要将甲烷部分氧化为H₂和CO.在甲烷部分氧化反应中,三维有序大孔LaFeO₃钙钛矿型氧化物比相同质量的纳米LaFeO₃氧化物提供了更多的氧,并且可使甲烷在较宽的反应阶段生成H₂和CO摩尔比为2:1的合成气,从而更有利于后续的费托合成等工艺.     

Preparation and characterization of three-dimensionally ordered macroporous styrene/p-methylstyrene syndiotactic copolymer

Three-dimensionally ordered macroporous (3DOM) styrene/p-methylstyrene syndiotactic copolymer (sPMS) with pore size 170 nm were fabricated by means of silica templates using (dbm)₂ Ti(OPh)₂/MAO catalytic system. The resulting materials were characterized by NMR, SEM, GPC and DSC. The results indicated that the 3DOM sPMS were highly syndiotacic, and the pore contraction was approximately 20.6%. Compared with bulk sPMS, 3DOM sPMS possessed the lower number-average molecular weight and broader molecular weight distribution. In terms of DSC results, the bulk sPMS exhibited the lower glass transition temperature than that of 3DOM one.     

Synthesis and electrochemical performance of three-dimensionally ordered macroporous LiCoO2

Three-dimensionally ordered macroporous (3DOM) LiCoO₂ was synthesized by colloidal crystal templating method using poly(methyl methacrylate) with the diameter of 232 nm as the template. The effects of roasting temperature on properties of LiCoO₂ cathode materials were investigated by thermogravimetric analysis (TG-DTG), scanning electron microscope, X-ray diffraction, transmission electron microscopy, and electrochemical measurements. The results indicated that the synthesized 3DOM LiCoO₂ calcined at 700 °C had better crystal framework and electrochemical properties. The 3DOM LiCoO₂ samples presented higher rate capacity compared to commercial LiCoO₂ with a specific discharge capacity of 151.2 mAh g^?1 at a current density of 1 C, and 92 % of the specific discharge capacity was retained after 50 charge–discharge cycling.     

Synthesis and crystal structure of a novel ternary oxoborate, PbBiBO4

A novel ternary borate oxide, lead bismuth boron tetraoxide, PbBiBO₄, has been prepared by solid-state reaction at temperature below 800 °C. The single-crystal X-ray structural analysis showed that PbBiBO₄ crystallizes in the monoclinic space group P2₁/n with , , , β=91.48(1), Z=4. It represents a new structure type in which distorted BiO₆⁹⁻ octahedra are connected to each other in corner- and edge-sharing manner to form two-dimensional layers that are bridged by B atoms of BO₃ triangles giving rise to a three-dimensional framework, with channels parallel to the [0 1 0] direction accommodating the pyramidally coordinated Pb²⁺ cations.     

The synthesis and structural characterization of the new ternary nitrides: Ca4TiN4 and Ca5NbN5

The ternary nitrides, Ca₄TiN₄ and Ca₅NbN₅, were synthesized in sealed niobium tubes using lithium nitride as a flux at 900 and 1050 °C, respectively. The structures of both compounds were solved from single-crystal X-ray diffraction data. Ca₄TiN₄ is the first example of a calcium group IV nitride; it crystallizes in the triclinic space group (No. 2) with cell parameters a=5.9757(5) Å, b=6.0129(5) Å, c=6.0116(12) Å, α=71.565(4)°, β=79.471(4)°, γ=68.258(4)° and Z=2. Ca₄TiN₄ is isostructural with Na₄TiO₄ and contains tetrahedral TiN₄ units connected through edges and corners to CaN₄ tetrahedra and CaN₅ square pyramids. Ca₅NbN₅ crystallizes in the monoclinic space group C2/m (No. 12) with cell parameters a=11.922(7) Å, b=6.878(5) Å, c=8.936(7) Å, β=101.22(3)° and Z=4. Ca₅NbN₅ is isostructural with Ba₅NbN₅; the structure contains NbN₄ tetrahedra that share vertices with CaN₅ trigonal bipyramids.     

Preparation and characterization of three-dimensionally ordered macroporous yttria-stabilized zirconia by aqueous organic gel route

Three-dimensionally ordered macroporous (3-DOM) yttria-stabilized zirconia (YSZ) was prepared by aqueous organic gel method through the interstitial spaces between polystyrene spheres assembled on glass substrates. The morphologies and pore size of the porous YSZ were characterized by scanning electron microscope (SEM) and nitrogen adsorption. The thermal behavior, the phase and chemical composition of PS/YSZ composite were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results show that porous YSZ has been formed with the pores arranged in an ordered close-packed three-dimensional structure. Ni/YSZ cermet was also prepared by immersing the 3-DOM YSZ into the solution of nickel nitrate and urea. The electrical conductivity of Ni/YSZ was about 400 S cm⁻¹ between 600 and 800 °C.     

Synthesis,characterization of SiO2 supported-industrial phosphoric acid catalyst for hydrolysis of NaBH4 solution

Abstract

Tunisian industrial phosphoric acid H₃PO₄ was supported on silica gel SiO₂ (SIPA) to catalyze the hydrolysis reaction of aqueous alkaline sodium borohydride (NaBH₄). The SiO₂ was produced from purified quartz sand using alkali fusion-acidification chemical process. The BET surface area results indicate that the prepared silica gel could reach a specific surface area up to 585 m²/g. The addition of PO₃H₂ functional groups resulted in an increase of surface acidity of SiO₂ catalyst as shown by FT-IR and DTA-DTG spectra. The total acidity of SIPA catalyst was determined by titration to be 2.8?mmol H⁺/g. SEM/EDS maps reveal the distribution of heavy metals on the silica surface. The effect of supported PO₃H₂ functional groups and heavy metals on the NaBH₄ hydrolysis reaction was studied for different ratios of SIPA catalyst to NaBH₄. The sample 12SIPA/NaBH₄ leads to a very high hydrogen generation rate (up to 90%). The activation energy of hydrogen generation by NaBH₄ hydrolysis was 25.7?kJ mol^?1.     

Synthesis, characterization, and photocatalytic properties of InVO4 nanoparticles

Nanosized InVO₄ with orthorhombic structure was successfully synthesized at a relatively low calcination temperature of 600 °C by using an amorphous heteronuclear complex as precursor. The photocatalytic activity of InVO₄ catalyst has been evaluated by the decomposition of formaldehyde (FAD) under UV light () and visible light irradiation (). The as-synthesized InVO₄ catalyst showed higher photocatalytic activity for the FAD decomposition compared to the sample prepared by the conventional solid-state reaction. The calculations of the electronic band structures indicated that the valence band was composed of the O 2p orbitals, whereas the conduction band was formed by the V 3d orbitals with a small contribution of the In 5s orbitals. The photocatalytic activity of the as-prepared sample is discussed on the basis of the electronic band structure and bulk material structure.     

Synthesis, characterization and photocatalytic properties of novel zinc germanate nano-materials

We report the first instance of a hydrothermal synthesis of zinc germanate (Zn₂GeO₄) nano-materials having a variety of morphologies and photochemical properties in surfactant, template and catalyst-free conditions. A systematic variation of synthesis conditions and detailed characterization using X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, Raman spectroscopy, electron microscopy, X-ray photoelectron spectroscopy and small angle X-ray scattering led to a better understanding of the growth of these particles from solution. At 140 °C, the zinc germanate particle morphology changes with pH from flower-shaped at pH 6.0, to poly-disperse nano-rods at pH 10 when the Zn to Ge ratio in the synthesis solution is 2. When the Zn to Ge ratio is reduced to 1.25, mono-disperse nano-rods could be prepared at pH 7.5. Nanorod formation is also independent of the addition of cetyltrimethylammonium bromide (CTAB), in contrast to previous reports. Photocatalytic tests show that Zn₂GeO₄ nano-rods (by weight) and flower shaped (by surface area) are the most active for methylene blue dye degradation among the synthesized zinc germanate materials.     

Preparation of three-dimensionally ordered macroporous perovskite-type lanthanum-iron-oxide LaFeO3 with tunable pore diameters: High porosity and photonic property

Three-dimensionally ordered macroporous (3DOM) lanthanum-iron-oxide (LaFeO₃) with different pore diameters was prepared using a colloidal crystal of polymer spheres with different diameters as templates. Ethylene glycol-methanol mixed solution of metal nitrates was infiltrated into the void of the colloidal crystal template of a monodispersed poly(methyl methacrylate) (PMMA) sphere. Heating of this PMMA-metal salt-ethylene glycol composite produced the desired well-ordered 3DOM LaFeO₃ with a high pore fraction, which was confirmed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), mercury (Hg) porosimetry, and ultraviolet-visible (UV-vis) diffuse reflectance spectra. 3DOM LaFeO₃ with pore diameters of 281 and 321 nm shows opalescent colors because of photonic stop band properties. Catalytic activity of the 3DOM LaFeO₃ for combustion of carbon particles was enhanced by a potassium cation, which was involved from K₂S₂O₈ used as a polymerization initiator.     

Pseudocapacitive effect and Li+ diffusion coefficient in three-dimensionally ordered macroporous vanadium oxide for energy storage

In order to act as extrinsic pseudocapacitor materials, nanoscale vanadium oxides are required to simultaneously exhibit a capacitance-based high power density and an intercalation-based high energy density. We have fabricated a three-dimensionally ordered macroporous (3DOM) structure with a wall thickness of 14 nm that fulfills the above requirements. The 3DOM vanadium oxide film exhibits high rate performance with 355 F g^− 1 at 0.5 A g^− 1 and 125 F g^− 1 at 15 A g^− 1. The enhanced pesudocapacitive effect and Li-ion diffusion coefficient based on the 3DOM nanostructure, also contributes to the high rate capability of vanadia, which can be confirmed by cyclic voltammetry and chronoamperometry.     

Synthesis and characterization of mixed-morphology CePO4 nanoparticles

Cerium phosphate nanoparticles with diameters of 10-180 nm were synthesized by a variety of solution techniques. X-ray diffraction (XRD) determined the crystalline phase(s) present in each sample. Population, shift, and spin-lattice relaxation ³¹P solid-state nuclear magnetic resonance (NMR) measurements accounted for all the ³¹P nuclei expected in each sample, and were able to distinguish between phosphorous nuclei in different environments and phases. Transmission electron microscopy (TEM) characterized the morphology and crystallinity of the powder samples as well as of the sintered compacts of the powders. In conjunction with TEM, energy-dispersive spectroscopy (EDS) provided a measure of the composition of the bulk intergranular regions within each CePO₄ sample. The presence of an amorphous, phosphate-rich intergranular phase was found in those samples prepared by dissolution of ceria in H₃PO₄ under various conditions.     

Synthesis and characterization of phosphate-modified LiMn2O4 cathode materials for Li-ion battery

<正>LiMn_2O_4 spinel cathode materials were modified with 2 wt.%Li-M-PO_4(M=Co,Ni,Mn) by polyol synthesis method.The phosphate surface-modified LiMn_2O_4 cathode materials were physically characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS).The charge-discharge test showed that the cycling and rate capacities of LiMn_2O_4 cathode materials were significantly enhanced by stabilizing the electrode surface with phosphate.     

Synthesis, characterization and optical properties of ordered macroporous organosilicas

Ordered macroporous organosilica materials with uniform pore size in the range of 0.2-1.35 [micro sign]m have been fabricated by using self-assembled colloidal crystals as templates, and characterized with SEM, TGA, FTIR, MAS NMR, and optical reflectance spectrometry.     

Synthesis,spectroscopic and thermal characterization of Co(II) tetrahydrogen hexaoxoiodate tetrahydrate

A new cobalt(II) tetrahydrogen hexaoxoiodate tetrahydrate Co(H₄IO₆)₂·4H₂O is prepared by crystallization from an acidic aqueous solution. This compound is identified by quantitative analysis, TG, DTA, DSC and IR spectra. A thermal decomposition scheme is proposed. Some phase transitions are identified and the corresponding enthalpy changes are determined.     

Synthesis and characterization of sulfate and dodecylbenzenesulfonate intercalated zinc-iron layered double hydroxides by one-step coprecipitation route

Inorganic sulfate- and organic dodecylbenzenesulfonate (DBS)-intercalated zinc-iron layered double hydroxides (LDHs) materials were prepared by one-step coprecipitation method from a mixed salt solutions containing Zn(II), Fe(II) and Fe(III) salts. The as-prepared samples have been characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), low-temperature nitrogen adsorption, scanning electron microscopy (SEM), inductively coupled plasma emission spectroscopy (ICP), and Mössbauer spectroscopy (MS). The XRD analyses demonstrate the typical LDH-like layered structural characteristics of both products. The room temperature MS results reveal the characteristics of both the Fe(II) and Fe(III) species for SO₄²⁻-containing product, while only the Fe(III) characteristic for DBS-containing one. The combination characterization results and Rietveld analysis illustrate that the SO₄²⁻-containing product possesses the Green Rust two (GR2)-like crystal structure with an approximate chemical composition of [Zn_0.435·Fe^II_0.094·Fe^III_0.470·(OH)₂]·(SO₄²⁻)_0.235·1.0H₂O, while the DBS-containing one exhibits the common LDH compound-like structure. The contact angle measurement indicates the evident hydrophobic properties of DBS-containing nanocomposite, compared with SO₄²⁻-containing product, due to the modification of the internal and external surface of LDHs by the organic hydrophobic chain of DBS.     

Synthesis and characterization of MgF2 and KMgF3 nanorods

MgF₂ nanorods with diameters of 60-100 nm were synthesized by a microemulsion method. Subsequent hydrothermal reaction of as-synthesized MgF₂ nanorods and KF at 240°C for 3 days or 140°C for 7 days resulted in KMgF₃ nanorods, which retained the rod-like morphology of the source material MgF₂ in the reaction process. The morphology of as-synthesized MgF₂ strongly depended on the molar ratio between water and the surfactant CTAB and the concentration of CTAB.     

Synthesis and crystallization of macroporous hydroxyapatite

Macroporous hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ was synthesized using ordered polystyrene sphere templates that were impregnated with a calcium phosphate precursor solution which was allowed to solidify followed by sintering from 500 to 1000 °C in flowing oxygen to remove the polymer and crystallize the phosphates. Using a combination of diffraction and imaging the face-centered cubic macroporous framework was shown to have pore diameters of 0.8-0.9 μm and to be composed of hydroxyapatite (80-98 wt%) and X-ray diffraction amorphous material (14-55%), the proportions dependent on the duration and temperature of heat treatment. At lower sintering temperatures the HAp is calcium deficient. Ion exchange of calcium by cadmium demonstrated the potential of this material for hazardous waste remediation.