Synthesis and crystal structure of CaxCo4Sb12 skutterudites

New skutterudite compounds Ca_xCo₄Sb₁₂ (0<x?0.2) have been prepared by traditional metallurgical synthesis. The compounds have been characterized by X-ray powder diffraction (XRD), electron probe microanalysis (EPMA) and neutron powder diffraction. Rietveld refinement of the structures against neutron powder diffraction data (on Ca_0.1Co₄Sb₁₂, , a=9.0429 Å, χ²=1.55; wR_p=1.52) enabled the location of Ca in the voids of the skutterudite structure to be verified. The large displacement ellipsoid for Ca is consistent with “rattling” in the cage of the crystalline structure. XRD combined with EPMA analyses showed that the maximum occupancy of Ca atoms is about 0.2.     

A novel inorganic-organic compound: Synthesis and structural characterization of tin(II) phenylbis(phosphonate), Sn2(PO3C6H4PO3)

A novel tin(II) phenylbis(phosphonate) compound has been synthesized hydrothermally and its structure has been determined by single crystal X-ray diffraction. The structure is monoclinic, space group P2₁/c (no. 14), a=4.8094(4), b=16.2871(13), ; β=106.292(6)°, , Z=2. The three-dimensional structure consists of 3-coordinated tin and 4-coordinated phosphorus double layers separated (pillared) by phenyl rings. These phenyl rings are placed 4.8 Å apart along the a-axis in the structure resulting in lower surface area (∼14 m²/g). The porosity has been increased by replacing phenyl groups by methyl groups (∼31 m²/g).     

The H2O-D2O solvent isotope effects on the molar volumes of alkali-chloride solutions at T = (288.15, 298.15, and 308.15) K

Densities of LiCl, NaCl, KCl, and CsCl in normal and heavy water solutions have been measured using a vibrating-tube densitometer with (1-2) · 10⁻⁶ precision at T = (288.15, 298.15, and 308.15) K over a wide concentration range from (0.1 to 5) molal, m. Solvent isotope effects (IE) on apparent molar volumes, as well as both on solute- and solvent-partial molar volumes were evaluated to establish their trend with cationic size in a systematic way. With the exception of the LiCl, both the “normal” standard IEs, , and the “inverse” excess IEs of the solutes, , increase linearly with the electrostriction effect of the cations (1/r_ion), while with increasing temperature and/or concentration, the excess effects become almost the same.In contrast to the solute excess IEs, which show linear m^1/2-dependence over the whole concentration range, except for LiCl, the “inverse” excess IEs of the solvent, , hardly change over the lower concentration range (, m ? 1). However, with further increase of the concentration, these IEs significantly decrease. Individual ionic standard and excess volume contributions are derived and the results are discussed in terms of structural concepts of ionic hydration.     

IrSr2TbCu2O8, a high-pressure metamagnetic cuprate: Structure, microstructure and properties

The synthesis, structure and microstructure of the IrSr₂TbCu₂O₈ cuprate showing metamagnetic properties are described. The sample was prepared at high temperatures and pressures up to 9.2 GPa. The structure is tetragonal, showing a 1212 type structure, that derives from the classical YBaCuO superconductor structure, replacing the tetracoordinated square planar copper [Cu-O₄] in the “chains” by octahedral [Ir-O₆] groups that form a perovskite-like layer in the basal plane of the unit cell. A “simple” cell, ∼a_p×a_p×3a_p, where a_p is the basic perovskite unit cell parameter (a_p∼3.8 Å), is supported by X-ray powder diffraction (XRD) and a so-called “diagonal” one, ∼√2a_p×√2a_p×3a_p, by SAED; a microdomain texture of latter cell and a series of very interesting extended defects have been observed by HREM. Magnetic susceptibility measurements show a magnetic transition, T_N∼6 K, with negative Weiss temperature, that indicates antiferromagnetic interactions among the Tb moments. The magnetic structure has been determined by neutron diffraction. A detailed magnetic study has revealed a metamagnetic behavior, something not previously observed in this type of cuprates. Specific heat and resistivity measurements have also been performed to characterize the transition.     

Isolated spin 3/2 plaquettes in Na3RuO4

The crystal structure of Na₃RuO₄ determined by powder neutron diffraction is reported. The structure consists of isolated tetramers of edge sharing RuO₆ octahedra in the ab plane, creating isolated four-member plaquettes of Ru atoms comprised of two equilateral triangles sharing an edge. Magnetic susceptibility measurements reveal an antiferromagnetic transition at ∼29 K, with . Neutron diffraction data indicate the onset of three-dimensional magnetic ordering at 29 K.     

Synthesis, crystal structure and magnetic properties of an Os-containing pillared perovskite La5Os3MnO16

A new Os-containing, pillared perovskite, La₅Os₃MnO₁₆, has been synthesized by solid state reaction in sealed quartz tubes. This extends the crystal chemistry of these materials which had been known only for Mo and Re, previously. The crystal structure has been characterized by X-ray and neutron powder diffraction and is described in space group C-1 with parameters a=7.9648(9) Å; b=8.062(1) Å; c=10.156(2) Å, α=90.25(1)°, β=95.5(1)°; γ=89.95(2)°, for La₅Os₃MnO₁₆. The compound is isostructural with the corresponding La₅Re₃MnO₁₆ phase. A very short Os-Os distance of 2.50(1) Å was found in the dimeric pillaring unit, Os₂O₁₀, suggestive of a triple bond as demanded by electron counting. Nearly spin only values for the effective moment for Os⁵⁺ () and Mn²⁺ () were derived from magnetic susceptibility data. Evidence for magnetic transitions was seen near ∼180 and 80 K. Neutron diffraction data indicate that T_c is 170(5) K. The magnetic structure of La₅Os₃MnO₁₆ at 7 K was solved revealing that Os⁵⁺ and Mn²⁺ form ferrimagnetically coupled layers with antiferromagnetic interlayer ordering. The ordered moments are for Mn²⁺ and for Os⁵⁺, which are reduced from the respective spin only values of 5.0 and . The observation of net ferrimagnetic (antiparallel) intraplanar coupling between Os⁵⁺(t_2g³) and Mn²⁺(t_2g³e_g²) is interesting as it appears to contradict the Goodenough-Kanamori rules for 180° superexchange.     

Four new hydroxymonophosphates with closely related intersecting tunnels structures: The series AM(PO3(OH))2 with A=Rb, Cs; M=Fe, Al, Ga, In

The family of hydroxymonophosphates of generic formula AM^III(PO₃(OH))₂ has been revisited using hydrothermal techniques. Four new phases have been synthesized: CsIn(PO₃(OH))₂, RbFe(PO₃(OH))₂, RbGa(PO₃(OH))₂ and RbAl(PO₃(OH))₂. Single crystal diffraction studies show that they exhibit two different structural types from previously observed other phases with A=H₃O, NH₄, Rb and M=Al, V, Fe. The “Cs-In” and “Rb-Fe” phosphates crystallize in the triclinic space group , with the cell parameters a=7.4146(3) Å, b=9.0915(3) Å, c=9.7849(3) Å, α=65.525(3)°, β=70.201(3)°, γ=69.556(3)° and V=547.77(4) Å³ (Z=3) for CsIn(PO₃(OH))₂ and a=7.2025(4) Å, b=8.8329(8) Å, c=9.4540(8) Å, α=65.149(8)°, β=70.045(6)°, γ=69.591(6)° and V=497.44(8) Å³ (Z=3) for α-RbFe(PO₃(OH))₂. The “Rb-Al” and “Rb-Ga” phosphates crystallize in the Rc space group, with a=8.0581(18) Å and c=51.081(12) Å (V=2872.5(11) Å³ and Z=18) for RbAl(PO₃(OH))₂ and a=8.1188(15) Å and c=51.943(4) Å (V=2965(8) Å and Z=18) for RbGa(PO₃(OH))₂. These two structural types are closely related. Both are built up from M^IIIO6 octahedra sharing their apices with PO₃(OH) tetrahedra to form [M₃(PO₃OH)₆] units, but the latter exhibits a different configuration of their tetrahedra. The three-dimensional host-lattices result from the connection of the [M₃(PO₃OH)₆] units and they present numerous intersecting tunnels containing the monovalent cations.     

Magnetic study of two isotypic manganese chloro-sulfides: MnSbS2Cl and the new compound MnBiS2Cl

Among the MnPnQ₂X compounds (Pn: pnictide; Q: chalcogen; X: halogen), two isotypic chloro-sulfides, MnSbS₂Cl and MnBiS₂Cl, have been studied. MnBiS₂Cl is a new compound synthesized by solid state reaction at 500 °C. It is orthorhombic, space group Pnma, with a=9.502(2), b=3.8802(8), , , Z=4. Its X-ray single crystal study shows (001) waved layers of MnS₄Cl₂ octahedra, opposite edge-sharing along b, and corner-sharing along a. Similar magnetic susceptibilities for both compounds have been recorded, indicating high spin Mn²⁺ with anti-ferromagnetic exchange. Correlatively, specific heat versus temperature shows a magnetic transition at for the Sb-bearing compound, and a two-steps magnetic transition at 28 and 32 K for the Bi isotype. The magnetic structure of MnSbS₂Cl has been determined by neutron diffraction, revealing a magnetic ordering at 1.5 K with an incommensurate wave-vector along b (k=[0, 0.3838, 0]). Two modulation models, sinusoidal and helicoidal, give quite equivalent reliability factors (R_mag=0.0573 and 0.0586, respectively).     

Novel perovskite-related barium tungstate Ba11W4O23

Ba₁₁W₄O₂₃ was synthesized at 1300 °C, followed by quenching with liquid nitrogen. The crystal structure, which was known to be cryolite-related but has remained unclear, was initially determined by single-crystal X-ray diffraction for the isostructural Ru-substituted compound Ba₁₁(W_3.1Ru_0.9)O_22.5, which was discovered during exploratory synthesis in the Ba-Ru-O system. The structure of Ba₁₁W₄O₂₃ was refined by a combined powder X-ray and neutron Rietveld method (Fd-3m, a=17.1823(1) Å, Z=8, R_p=3.09%, R_wp=4.25%, χ²=2.8, 23 °C). The structure is an example of A-site vacancy-ordered 4×4×4 superstructure of a simple perovskite ABO₃, and it may be written as (Ba_1.75□_0.25)BaWO_5.75□_0.25, emphasizing vacancies on both metal and anion sites. The local structure of one of two asymmetric tungsten ions is the WO₆ octahedron, typical of perovskite. The other tungsten, however, is surrounded by oxygen and anionic vacancies statistically distributed over three divided sites to form 18 partially occupied oxygen atoms (∼30% on average), represented as WO_18/3. The A-site cation-vacancies are ordered at the 8a (, , ) site in between adjoining WO_18/3 polyhedra which form 1-D arrangements along [110] and equivalent directions. In situ high-temperature XRD data have shown that the quenched Ba₁₁W₄O₂₃ at room temperature is isostructural to the high-temperature phase at 1100 °C.     

Growth of high quality and large-sized Rb0.3MoO3 single crystals by molten salt electrolysis method

High quality and large-sized Rb_0.3MoO₃ single crystals were synthesized by molten salt electrolysis method. X-ray diffraction (XRD) patterns and rocking curves, as well as the white beam Laue diffraction of X-ray images show the crystals grown by this method have high quality. The lattice constants evaluated from XRD patterns are a₀=1.87 nm, b₀=0.75 nm, c₀=1.00 nm, β=118.83^°. The in situ selected area electron diffraction (SAED) patterns along the , and zone axes at room temperature indicate that the Rb_0.3MoO₃ crystal possess perfect C-centered symmetry. Temperature dependence of the resistivity shows this compound undergoes a metal to semiconductor transition at 183 K.     

Synthesis and crystal structure of gallosilicate- and aluminogermanate tetrahydroborate sodalites Na8[GaSiO4]6(BH4)2 and Na8[AlGeO4]6(BH4)2

Tetrahydroborate enclathrated sodalites with gallosilicate and aluminogermanate host framework were synthesized under mild hydrothermal conditions and characterized by X-ray powder diffraction and IR spectroscopy. Crystal structures were refined in the space group P-43n from X-ray powder data using the Rietveld method. Na₈[GaSiO₄]₆(BH₄)₂: a=895.90(1) pm, V=0.71909(3)×10⁻⁶ nm³, R_P=0.074, R_B=0.022, Na₈[AlGeO₄]₆(BH₄)₂: a=905.89(2) pm, V=0.74340(6)×10⁻⁶ nm³, R_P=0.082, R_B=0.026. The tetrahedral framework T-atoms are completely ordered in each case and the boron atoms are located at the centre of the sodalite cages. The hydrogen atoms of the enclathrated anions were refined on x, x, x positions, restraining them to boron-hydrogen distances of 116.8 pm as found in NaBD₄.The IR-absorption spectra of the novel phases show the typical bands of the tetrahedral group as found in the spectrum of pure sodium boron hydride.The new sodalites are discussed as interesting -containing model compounds which could release pure hydrogen.     

A one-dimensional zirconium hydroxyfluoride, [Zr(OH)2F3][enH]

The first example of a unidimensional zirconium hydroxide fluoride was synthesized under mild solvothermal treatment and characterized by X-ray diffraction and thermal techniques. Monoprotonated ethylenediamine cations reside between the anionic chains. Crystal data for this material are as follows: [C₂N₂H₉][Zr(OH)₂F₃], M=243.35, orthorhombic, space group Pca2₁, a=6.8016(13), b=6.1393(12), , , , Z=4, , μ(Mo-Kα)=1.777 mm⁻¹, . The material transforms to an unknown layered material at ∼175 °C, a common occurrence for 1D structures where the chains are arranged in hydrogen-bonded layers and separated by interlayer organoammoniums. Collapse to the known condensed mineral phase Zr(FO)_2.7 occurs at ca. 275 °C before finally transforming to the baddeleyite form of ZrO₂ at ca. 460 °C.     

A TEM study of Ni ordering in the Ni6Se5−xTex, 0<x<∼1.7, system

The Ni₆Se_5−xTe_x, 0<x<∼1.7, system has been carefully investigated via electron diffraction and TEM imaging. They reveal a somewhat disordered modulated superstructure phase arising from Ni ion ordering within an essentially well-defined chalcogen sub-structure. As x, and the underlying parent substructure cell dimensions increase, the incommensurate primary modulation wave-vector q characteristic of this Ni ion ordering quickly swings from close to for x=0 towards for x?0.5. A lock-in to would formally transform the underlying parent Bmmb (a_p, b_p, c_p) structure into a P1a1 (a_s=2a_p, b_s=b_p, c_s=a_p+c_p) superstructure phase.     

Crystal structure, magnetic and electrochemical properties of a quaternary thiospinel: Ag2MnSn3S8

A monophasic sample of Ag₂MnSn₃S₈ has been prepared by heating stoichiometric amounts of the constituent metals and sulfur in evacuated silica tubes at 670°C. Structural analysis of Ag₂MnSn₃S₈ using Rietveld refinement of powder X-ray diffraction data shows that it crystallizes in the space group with a=10.6984(2) Å. Magnetization measurements in the temperature range 5-300 K indicate paramagnetic behavior with a μ_eff of 5.80 μ_B, consistent with the divalent nature of manganese. Electrochemical studies show a coulombic capacity of ∼50 Ah kg⁻¹ for the cell constructed with Ag₂MnSn₃S₈ as the positive electrode.     

Low-temperature and high-pressure structural behaviour of NaBi(MoO4)2—an X-ray diffraction study

NaBi(MoO₄)₂ has been characterized by single-crystal and powder X-ray diffraction in the temperature and pressure ranges 13-297 K and 0-25 GPa, respectively. The domain structure developing below proves that NaBi(MoO₄)₂ undergoes a ferroelastic phase transition associated with tetragonal I4₁/a to monoclinic I2/a symmetry change. The character of the unit cell evolution as a function of temperature indicates a continuous transition with the spontaneous strain as an order parameter. The structural distortion, due to small displacements of Bi³⁺ and Na⁺ ions, develops slowly. Therefore the overall changes, as measured in single-crystal diffraction at 110 and 13 K, appear to be subtle. High-pressure powder X-ray diffraction shows that the elastic behaviour is anisotropic, the linear compressibility along the a- and c-axes of the tetragonal unit cell being β_a=2.75(10)×10^-3 and , respectively. The cell contraction, stronger along the c-axis, causes the distances between the MoO₄ layers to be shortened. Consequently, the cation migration in the channels formed by MoO₄ tetrahedra becomes hindered, and any symmetry lowering phase transition is not observed up to 25 GPa. The zero-pressure bulk modulus is , and its pressure derivative .     

“Unusual” phase transitions in CeAlO3

High-resolution time-of-flight neutron powder diffraction was carried out to investigate the crystal structures of CeAlO₃ over a wide temperature range between 4.2 and 1423 K. Confirming the recent result of X-ray powder diffraction, the room temperature structure is tetragonal with the space group I4/mcm (tilt system (a⁰a⁰c⁻)). The tetragonal structure persists down to 4.2 K. However, above room temperature CeAlO₃ undergoes three phase transitions: first to the orthorhombic Imma structure (tilt system (a⁰b⁻b⁻)) at, e.g., 373 K, then to the rhombohedral structure (tilt system (a⁻a⁻a⁻)) at, e.g., 473 K, and finally, to the primitive cubic structure which exists above 1373 K. The sequence of phases, , which occurs in CeAlO₃ is a rare one in oxide perovskites.     

Characterization of the new Bi∼6.2Cu∼6.2O8(PO4)5 oxyphosphate; a disordered compound containing 2- and 3-O(Bi, Cu)4 tetrahedra—wide polycationic ribbons

The present work is dedicated to the XRD, ED and HREM characterization of a new bismuth copper oxyphosphate Bi_∼6.2Cu_∼6.2O₈(PO₄)₅ (a=11.599(2)Å, , c=37.541(5)Å, R₁=0.0755, Rw₂₌0.174, G.S Pn2₁a). The relatively long size of its c parameter is due to the arrangement along this direction of two kinds of ribbon-like polycations formed by edge sharing O(Bi, Cu)₄ tetrahedra. The existence of such cations is characterized by the b∼5.2 Å value intrinsic to the ribbons structure and commonly found in bismuth oxyphosphate materials. In the title compound, 2-tetrahedra wide [Bi_∼2.4Cu_∼3.6O₄]^6.4+ and 3-tetrahedra wide [Bi_∼5Cu_∼3O₆]⁹⁺ ribbons are isolated by phosphate groups and alternate along c. The interstitial site created between two different sizes ribbons is occupied by Cu²⁺ cations disordered over several close crystallographic sites. The mixed Bi³⁺/Cu²⁺ nature of certain edge-of-ribbons positions induces a disorder over several configurations of the phosphate groups. The concerned oxygen atoms form the environment of the disordered interstitial Cu²⁺ cations which occupy tunnels formed by the phosphate anions. The high-resolution electron microscope study enables a precise correlation between the observed images and the refined crystal structure, evidencing the polycations visualization. Furthermore, this material being the second example of partially disordered compound similar chemical system, some topological rules can be deduced. The b-axis doubling was observed by ED and HREM and is assigned to the ordering of interstitial Cu²⁺ within tunnels cations. A partial intra-tunnel ordering was also observed.     

Synthesis and single crystal structures of ternary phosphides Li4SrP2 and AAeP (A=Li, Na; Ae=Sr, Ba)

Two new (NaSrP, Li₄SrP₂) and two known (LiSrP, LiBaP) ternary phosphides have been synthesized and characterized using single crystal X-ray diffraction studies. NaSrP crystallizes in the non-centrosymmetric hexagonal space group (#189, a=7.6357(3) Å, c=4.4698(3) Å, V=225.69(2) Å³, Z=3, and R/wR=0.0173/0.0268). NaSrP adopts an ordered Fe₂P structure type. PSr₆ trigonal prisms share trigonal (pinacoid) faces to form 1D chains. Those chains define large channels along the [001] direction through edge-sharing. The channels are filled by chains of PNa₆ face-sharing trigonal prisms. Li₄SrP₂ crystallizes in the rhombohedral space group (#166, a=4.2813(2) Å, c=23.437(2) Å, V=372.04(4) Å³, Z=3, and R/wR=0.0142/0.0222). In contrast to previous reports, LiSrP and LiBaP crystallize in the centrosymmetric hexagonal space group P6₃/mmc (#194, a=4.3674(3) Å, c=7.9802(11) Å, V=131.82(2) Å³, Z=2, and R/wR=0.0099/0.0217 for LiSrP; a=4.5003(2) Å, c=8.6049(7) Å, V=150.92(2) Å³, Z=2, and R/wR=0.0098/0.0210 for LiBaP). Li₄SrP₂, LiSrP, and LiBaP can be described as Li₃P derivatives. Li atoms and P atoms make a graphite-like hexagonal layer, . In LiSrP and LiBaP, Sr or Ba atoms reside between layers to substitute for two Li atoms of Li₃P, while in Li₄SrP₂, Sr substitutes only between every other layer.     

Synthesis, structure and properties of new chain cuprates, Na3Cu2O4 and Na8Cu5O10

Na₃Cu₂O₄ and Na₈Cu₅O₁₀ were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN₃ and NaNO₃. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 °C for 2000 h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na₃Cu₂O₄: P2₁/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3) Å, β=108.389(1)°, 2516 independent reflections, R₁(all)=0.0813, wR₂ (all)=0.1223; Na₈Cu₅O₁₀: Cm, Z=2, a=8.228(1), b=13.929(2), , β=111.718(2)°, 2949 independent reflections, R₁(all)=0.0349, wR₂ (all)=0.0850), the main feature of both crystal structures are CuO₂ chains built up from planar, edge-sharing CuO₄ squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na₃Cu₂O₄ these ions alternate in the chains, in Na₈Cu₅O₁₀ the periodically repeated part consists of five atoms according to Cu^II-Cu^II-Cu^III-Cu^II-Cu^III. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na₃Cu₂O₄: , , Na₈Cu₅O₁₀: , , magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13 K (Na₃Cu₂O₄) and 24 K (Na₈Cu₅O₁₀).     

Structure and thermoelectric properties of the ordered skutterudite CoGe1.5Te1.5

The skutterudite-related material CoGe_1.5Te_1.5 has been synthesised and structurally characterised by powder neutron diffraction. Analysis of the high-resolution powder neutron diffraction data indicates that the structure of CoGe_1.5Te_1.5 retains the a⁺a⁺a⁺ tilt system of the ideal skutterudite structure, while the anions are ordered in layers perpendicular to the [111] direction of the skutterudite unit cell. This anion ordering results in a lowering of the symmetry from cubic to rhombohedral (space group , a=12.3270(5) and c=15.102(1) Å at 293 K). The electrical transport properties have been investigated using four-probe resistivity and Seebeck coefficient measurements. The temperature dependence of the electrical resistivity and the magnitude of the Seebeck coefficient indicate that CoGe_1.5Te_1.5 is an n-type semiconductor.