Electronic parameters and electronic structures in modulation-doped highly strained InxGa1−xAs/InyAl1−yAs coupled double quantum wells

Electronic parameters of a two-dimensional electron gas (2DEG) in modulation-doped highly strained In_xGa_1−xAs/In_yAl_1−yAs coupled double quantum wells were investigated by performing Shubnikov-de Haas (S-dH), Van der Pauw Hall-effect, and cyclotron resonance measurements. The S-dH measurements and the fast Fourier transformation results for the S-dH at 1.5 K indicated the electron occupation of two subbands in the quantum well. The electron effective masses of the 2DEG were determined from the cyclotron resonance measurements, and satisfied qualitatively the nonparabolicity effects in the quantum wells. The electronic subband structures were calculated by using a self-consistent method.     

First principles investigation of optical properties of zinc-blende AlxGa1−xAs1−yNy materials

We have performed a first-principle Full Potential Linearized Augmented Plane Waves calculation within the local density approximation (LDA) to the zinc-blende Al_xGa_1−xAs_1−yN_y to predict its optical properties as a function of N and Al mole fractions. The accurate calculations of electronic properties such as band structures and optical properties like refractive index, reflectivity and absorption coefficient of Al_xGa_1−xAs and Al_xGa_1−xAs_1−yN_y with x≤0.375 and y up to 4% are presented. Al_xGa_1−xAs on GaAs have a lattice mismatch less than 0.16% and the lattice constant of Al_xGa_1−xAs has a derivation parameter of 0.0113±0.0024. The band gap energies are calculated by LDA and the band anticrossing model using a matrix element of C_MN=2.32 and a N level of E_N=(1.625+0.069x) eV. The results show that Al_xGa_1−xAs can be very useful as a barrier layer in separate confinement heterostructure lasers and indicate that the best choice of x and y Al_xGa_1−xAs_1−yN_y could be an alternative to Al_xGa_1−xAs when utilized as active layers in quantum well lasers and high-efficiency solar cell structures.     

Electrical and optical properties of GexFexSe100−2x chalcogenide thin films

Optical absorption at room temperature and electrical conductivity at temperatures between 283 and 333 K of vacuum evaporated Ge_xFe_xSe_100−2x (0≤x≤15) amorphous thin films have been studied as a function of composition and film thickness. It was found that the optical absorption is due to indirect transition and the energy gap increases with increasing both Ge and Fe content; on the other hand, the width of the band tail exhibits the opposite behavior. The optical band gap E_opt was found to be almost thickness independent. The electrical conductivity show two types of conduction, at higher temperature the conduction is due to extended states, while the conduction at low temperature is due to variable range hopping in the localized states near Fermi level. Increasing Ge and Fe contents were found to decrease the localized state density N(E_F), electrical conductivity and increase the activation energy for conduction, which is nearly thickness independent. Variation of the atomic densities ρ, molar volume V, glass transition temperature T_g cohesive energy C.E and number of constraints N_Co with average coordination number Z was investigated. The relationship between the optical gap and chemical composition is discussed in terms of the cohesive energy C.E, average heat of atomization and coordination numbers.     

Optical gain spectra of unstrained graded GaAs/AlxGa1 − xAs quantum well laser

We have calculated the optical gain spectra in unstrained graded GaAs/Al_xGa_1 − xAs single quantum well lasers as a function of the energy of the radiation, the quantum well width and the interface thickness. The optical gain spectra were calculated using the density matrix approach (Luttinger–Kohn method), considering the parabolic band model (conduction band), all subband mixing between the heavy and light holes (valence band), and the transversal electrical light polarization. Our results show that the optical peak gain is sensitive to the width and the graded profile of the interfaces, and is blue-shifted as a function of the interface width.     

Dependence of the interband transitions on the in mole fraction and the applied electric field in InxGa1−xAs/In0.52Al0.48As multiple quantum wells

Transmission electron microscopy (TEM) and photocurrent (PC) measurements were carried out to investigate the microstructural properties and excitonic transitions in In_xGa_1−xAs/In_0.52Al_0.48As multiple quantum wells (MQWs) for x = 0.54, 0.57 and 0.60. TEM images showed that high-quality 11-period In_xGa_1−xAs/In_0.52Al_0.48As MQWs had high-quality heterointerfaces. The results for the PC spectra at 300 K showed that the peaks corresponding to the excitonic transitions from the ground state electronic sub-band to the ground state heavy-hole band (E₁-HH₁) and the ground state electronic sub-band to the ground state light-hole band (E₁-LH₁) became closer to each other with decreasing In mole fraction and that E₁-HH₁ and E₁-LH₁ excitonic peaks shifted to longer wavelength with increasing applied electric field. The calculated values of the E₁-HH₁ interband transition energies were in qualitative agreement with those obtained form the PC measurements with and without applied electric field. These results can be helpful in understanding potential applications of In_xGa_1−xAs/In_yAl_1−yAs MQWs dependent on In mole fraction and applied electric field in long-wavelength optoelectronic devices.     

Theoretical study on InxGa1−xN/GaN quantum dots solar cell

In this work, the structure of In_xGa_1−xN/GaN quantum dots solar cell is investigated by solving the Schrödinger equation in light of the Kronig-Penney model. Compared to p-n homojunction and heterojunction solar cells, the In_xGa_1−xN/GaN quantum dots intermediate band solar cell manifests much larger power conversion efficiency. Furthermore, the power conversion efficiency of quantum dot intermediate band solar cell strongly depends on the size, interdot distance and gallium content of the quantum dot arrays. Particularly, power conversion efficiency is preferable with the location of intermediate band in the middle of the potential well.     

Optical properties of InGaN/GaN double quantum wells with varying well thickness

The optical properties and recombination kinetics of the InGaN/GaN double quantum well (DQW) structures with different well thickness (L_w) have been studied by means of photoluminescence (PL), time-resolved PL, and cathodoluminescence (CL) measurements. With increasing quantum well thickness up to 4 nm, the PL emission energy decreases and the blueshift of the PL emission energy increases with increasing excitation density. On the other hand, the PL emission energy of the DQWs with L_w=16 nm is higher than that of the DQWs with L_w=4 nm, and is independent of the excitation density. With increasing L_w from 1 to 4 nm, the PL decay times increase. In contrast, the decay times of 16 nm DQWs are faster than those of 4 nm DQWs. These different results for 16 nm DQWs such as the blueshift of the emission energy, the decrease of the excitation density dependence, and the increase of recombination rate can be ascribed to the relaxation of the piezoelectric field. We also observed the inhomegeneity in the CL spectra of the DQWs with L_w=1 nm on 1 μm scale.     

Magnetic and related properties of the solid solution CeCuxGa4−x

Physical properties of polycrystalline samples of CeCu_xGa_4−x (x = 0.2–1.4), crystallizing in the tetragonal BaAl₄-type structure (space group I 4/mmm), were studied by means of X-ray powder diffraction, magnetization, specific heat, electrical resistivity and magnetoresistivity measurements in wide temperature and magnetic fields ranges. The unit-cell volume of the system was found to decrease with increasing x (in total by about 4%) but the magnetic moments of Ce³⁺ ions remain localized in the whole x-range studied. The alloys exhibit ferromagnetic order at low temperatures, which manifests itself as distinct and relatively sharp anomalies in all the temperature characteristics measured. The ordering temperature decreases with increasing the Cu content from 5.5(1) K for x = 0.2 down to 1.35(5) K for x = 1.4, and the electrical transport properties of the system show some features characteristic of Kondo lattices.     

Structure and magnetic properties of Ca1−x−yMgxCu2+yO3 influenced by isoelectronic substitution x

Phases of the composition Ca_1−x−yMg_xCu_2+yO₃ have been prepared for the first time. The compounds are isostructural with the known end-members CaCu₂O₃ and MgCu₂O₃ showing a two-leg spin-ladder-like connection of copper and oxygen atoms within the Cu₂O₃-layer. Opposite the spin ladders this layer is folded, which results in a long-range antiferromagnetic ordering of these phases. The Néel temperature can be adapted by variation of x in Ca_1−x−yMg_xCu_2+yO₃ between 24 and 80 K. Several structural features, which influence the magnetic ordering, are discussed.     

Magnetic and transport properties of SmCoAsO1−xFx

A series of SmCoAsO_1−xF_x (with x=0, 0.05, 0.1, and 0.2) samples have been prepared by solid state reactions. X-ray powder diffraction proved that all samples can be indexed as a tetragonal ZrCuSiAs-type structure. A clear shrinkage of the lattice constants a and c with increasing F content indicated that F has been doped into the lattice. The magnetic and transport properties of the samples have been investigated. Parent SmCoAsO compound exhibited complicated magnetism including antiferromagnetism, ferromagnetism, and ferrimagnetism. For the fluorine doped samples, the antiferromagnetic Néel temperatures were almost independent of the F content and metamagnetic transitions were observed below antiferromagnetic Néel temperatures. With increasing F content, high temperature (below 142 K) ferrimagnetic state gradually changed to ferromagnetic state. In the resistivity result, metallic conduction in the region of 2-300 K and Fermi liquid behavior at low temperatures were shown in all samples. Transport properties at applied magnetic fields showed anomalies at low temperatures.     

Effect of Cu deficiency on the optical properties and electronic structure of CuIn1−xGaxSe2

Spectroscopic ellipsometry measurements of CuInSe₂ (CIS) and CuIn_1−xGa_xSe₂ (CIGS) over a range of Cu compositions reveal that there are important differences in electronic and optical properties between α-phase CIS/CIGS and Cu-poor CIS/CIGS. We find a reduction in the imaginary part of the dielectric function ?₂ in the spectral region, 1-3 eV. This reduction can be explained in terms of the Cu-3d density of states. An increase in band gap is found for Cu-poor CIS and CIGS due to the reduction in repulsive interaction between Cu-3d and Se-4p states. We also characterize the dielectric functions of polycrystalline thin-film α-phase CuIn_1−xGa_xSe₂ (x=0.18 and 0.36) to determine their optical properties and compare them with similar compositions of bulk polycrystalline CuIn_1−xGa_xSe₂. The experimental results have important implications for understanding the functioning of polycrystalline optoelectronic devices.     

Structural and optical properties of In35Sb45Se20−xTex phase-change thin films

Physical properties of In₃₅Sb₄₅Se_20−xTe_x thin films with different compositions (x=2.5, 5, 7.5, 10, 12.5 and 15 at %) prepared by electron beam evaporation method are studied. X-ray diffraction results indicate that the as-evaporated films depend on the Te content and the crystallized compounds consist mainly of Sb₂Se₃ with small amount of Sb₂SeTe₂. Transmittance and reflectance of the films are found to be thickness dependent. Optical-absorption data indicate that the absorption mechanism is direct transition. Optical band gap values decrease with increase in Te content as well as with increase in film thickness.     

Observation of new critical point in InxAl1−xAs alloy using spectroscopic ellipsometry

Using a spectroscopic ellipsometry, pseudodielectric functions 〈?〉 of In_xAl_1−xAs ternary alloy films (x = 0.43, 0.62, 0.75, and 1.00) from 0.74 to 6.48 eV were determined. Fast in-situ chemical etching to effectively remove surface overlayers using charge-coupled device detector and to avoid the reoxidation of the surface of films prior to the ellipsometric spectrum measurement was performed. At the high energy region, an additional critical point structure which is interpreted as the E′₁ transition from the band structure calculation of the linear augmented Slater-type orbital method was reported.     

Effective medium theory for the inhomogeneous PdMnxFe1−x alloys

Ternary PdMn_xFe_1−x alloys are known to form a microinhomogeneous random mixture of PdMn and PdFe phases. The unconventional ρ(x) dependence of dc resistivity and singularities in low frequency optical conductivity spectra of alloys are described footing within the effective medium approach. The essential point of the model proposed is the anomalous role of insulating interfaces, whose proliferation at intermediate x gives rise to the observed maximum of resistivity near x?0.8.     

Photoluminescence study in step-graded composition InxAl1−xAs/GaAs

We report on the lattice-mismatched growth of step-graded In_xAl_1−xAs buffer layers on GaAs (0 0 1) substrates by molecular beam epitay (MBE). The approach to growing highly lattice-mismatched epilayers is to interpose a buffer layer between the substrate and the active layer. Two samples G30 and G40 with active layer compositions, respectively, x = 0.46 and x = 0.41, are studied by photoluminescence (PL). At low temperature, the PL spectra show a large broadened band whose energy and intensity depend on the active layer composition. The step-graded layer compositions improved the crystalline quality of these structures and increase the active layer PL band intensity.     

Optical characterization of InGaAsN/GaAsN/GaAs quantum wells with InGaP cladding layers

Optical properties of InGaAsN/GaAs and InGaAsN/GaAsN/GaAs quantum well structures with InGaP cladding layers were studied by photoreflectance at various temperatures. The excitonic interband transitions of the InGaAsN/GaAsN/GaAs QW systems were observed in the spectral range above hν=E_g(InGaAsN). The confinement potential of the system with strain compensating GaAsN barriers became one step broader, thus more quantum states and larger optical transition rate were observed. A matrix transfer algorithm was used to calculate the subband energies numerically. Band gap energies, effective masses were adopted from the band anti-crossing model with band-offset values adjusted to obtain the subband energies to best fit the observed optical transition features. A spectral feature below and near the GaAs band gap energy from GaAs barriers is enhanced by the GaAs/InGaP interface space charge accumulation induced internal field.     

Characterization of aluminium concentration in shallow quantum wells AlxGa1−xAs/GaAs types

We report a reflectance study on series of shallow quantum wells GaAs/Al_xGa_1−xAs types with different aluminium concentration. The observed barrier exciton reflectance line shape depends strongly on the shift in aluminium concentration in the two barriers, with the appropriate choice of the cap layer thickness. This observation was based on the reflectivity line shape analysis of anti-Bragg structures.     

Impact of Al interdiffusion on optical properties in GaSb/AlGaSb multiple quantum wells

We have studied the effect of the Al interdiffusion on the electronic states of AlGaSb–GaSb quantum wells. Measuring the interdiffusion lengths by means of highly depth-resolved secondary ion mass spectrometry we find that the effect of Al diffusion results in the transformation of the ternary–binary system in a ternary–ternary structure. The modified energy levels, calculated on the basis of the measured chemical profile using a Pösch–Teller potential, are consistent with the blue shifts of the PL peaks measured in samples grown with increasing growth temperature.     

Ferromagnetism and antiferromagnetism in Ni2+x+yMn1−xAl1−y alloys

The magnetic behavior of Ni_2+xMn_1−xAl alloys around the stoichiometric 2:1:1 composition was investigated with several experimental techniques. The results of low-temperature magnetization measurements indicate that a competition mechanism between ferromagnetism and antiferromagnetism is expected in off-stoichiometric alloys. Although the Curie temperature is strongly dependent on the composition, the saturation magnetization has an unsystematic variation for deviations from the stoichiometric Ni₂MnAl alloy. A reentrant-spin-glass behavior is observed below 50 K.     

Magnetic properties of compounds in the system CaBaCo4−x−yZnxAlyO7 (x=0,1,2, y=0,1)

The magnetic properties of four compounds in the series CaBaCo_4−x−yZn_xAl_yO₇ (x=0,1,2, y=0,1) were investigated. Using AC-susceptibility and DC-magnetometry, magnetic transitions (T_fs) were found for all four compositions in the range 50-3 K. The data from the AC measurements proved to be frequency dependent: T_f increases with higher frequencies. An energy-loss in the magnetic coupling, indicated as contributions in the imaginary part of the magnetic susceptibility (χ″), was seen for every compound and its maximum appeared just below the maximum χ′. Modelling the data with Arrhenius-, Vogel-Fulcher-, and the power-law made it possible to relate the four compounds to spin-glass materials. The Casimir-du Pré relation was used to extract average relaxation times at T_f. The DC magnetisations clearly show differences between field-cooled and zero-field-cooled measurements. None of the compounds exhibit any metamagnetic properties up to 8 T. A new method is presented to calculate the saturation fields using DC data. Relaxation measurements on three compounds indicate that the systems relax very fast, in contrast to spin-glasses. Aging does not affect the fast relaxations. The compounds are interpreted as disordered anti-ferromagnets with spin-glass features.