Zeolite-Y enslaved manganese(III) complexes as heterogeneous catalysts

Traditional catalytic procedures for oxidation of phenol produce environmentally undesirable wastes. As a consequence, there is a clear demand for development of an environmentally benign catalytic route for the selective oxidation of phenol. A series of zeolite-Y enslaved Mn(III) complexes with Schiff bases derived from vanillin furoic-2-carboxylic acid hydrazone (VFCH), vanillin thiophene-2-carboxylic acid hydrazone (VTCH), ethylvanillin thiophene-2-carboxylic acid hydrazone (EVTCH), and/or ethylvanillin furoic-2-carboxylic acid hydrazone have been synthesized and characterized by physico-chemical techniques. Catalytic oxidations of phenol using 30% H₂O₂ as an oxidant over [Mn(VTCH)₂·2H₂O]⁺-Y, [Mn(VFCH)₂·2H₂O]⁺-Y, and [Mn(EVTCH)₂·2H₂O]⁺-Y under mild conditions were studied. These zeolite-Y enslaved Mn(III) complexes are stable and recyclable under current reaction conditions.     

New chiral (salen)manganese(III) systems for asymmetric epoxidation of styrene

Highly enantioselelctive and repeatable epoxidation of styrene was performed by using new chiral (salen)Mn(III) catalysts, which were derived from the initial immobilization of a homogeneous (salen)Mn(III) complex on solid carriers and subsequent dispersion into ionic liquids. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Acid-functionalized dissymmetric salen ligands and their manganese(III) complexes

Acid-functionalized symmetric and dissymmetric salen-type ligands were synthesized via a novel self-protection step in a quantitative yield. This synthetic method allows one to quickly prepare salen-based dissymmetric chiral compounds with tailorable coordinating properties. Therefore, this approach provides a blueprint for synthesizing and evaluating a new class of acid-functionalized salen ligands that can be used as chiral building blocks for a wide range of catalysts and coordination polymers with chemically tailorable properties.     

Insight into the mechanism of oxidative kinetic resolution of racemic secondary alcohols by using manganese(III)(salen) complexes as catalysts

The oxidative kinetic resolution of various racemic secondary alcohols with PhI(OAc)(2) catalyzed by chiral [Mn(III)(salen)] complexes in the presence of KBr was studied in a water/organic solvent mixture. The dramatic, synergetic effect of additives, organic solvent, and the substituents of chiral salen ligands on the enantioselectivities of the reactions is reported. Results from UV/Vis spectroscopy and ESI-MS studies provide evidence that these reactions are induced by the formation of a high-valent manganese intermediate.     

Heterogeneous chiral Mn(III) salen catalysts for the epoxidation of unfunctionalized olefins immobilized on mesoporous materials with different pore sizes

Two chiral Mn(III) salen complexes were immobilized onto a series of mesoporous MCM-41 and MCM-48 materials with different pore sizes and the as-synthesized catalysts were active and enantioselective for the asymmetric epoxidation of styrene and indene. The results of XRD, FTIR, DR UV-vis, and N₂ sorption showed that the chiral Mn(III) salen complexes were anchored in the channels of mesoporous materials. The influence of organic silicane dosage on the catalytic performance was studied and the optimum dosage of organic silicane for preparing heterogeneous catalysts was determined. Furthermore, the effect of the fine-tuning of pore size on the performance of heterogeneous catalysts was discussed. In general, larger pore size of the supports could lead to higher conversions and the compatible pore size with substrate may be responsible for the improved enantiomeric excess (ee) values.     

Studies of the catalytic activity of Fe(III)(salen) complexes as epoxidation catalysts

Two new Fe(III)(salen) complexes, FeL¹ClO₄·2H₂O (1) and FeL²ClO₄ (2) [L¹ = N,N′-ethylenebis(3-formyl-5-methylsalicylaldimine) and L² = N,N′-cyclohexenebis(3-formyl-5-methylsalicylaldimine)], have been synthesized and characterized. The catalytic activity of the complexes for epoxidation of alkenes has been investigated in the presence of two terminal oxidants PhIO and NaOCl, with two solvents CH₃CN and CH₂Cl₂. As alkenes styrene and (E)-stilbene have been chosen for investigation; styrene is a better substrate than electron-rich (E)-stilbene. The study also suggests that unlike their Mn(III) counterparts, 1 and 2 are poor epoxidation catalysts; catalysis proceeds with formation of one intermediate, rather than forming more than one intermediate depending on the terminal oxidant used. Use of exogenous neutral donor ligands such as Py, PyNO and 1-MePy is effective to improve catalytic behavior.     

Studies on binuclear hydroxo/carboxylato-bridged manganese(III) complexes and a mononuclear manganese(III) complex involving salen type ligands

Synthesis of six hydroxo-bridged binuclear manganese(III) complexes of formulae [MnL-X-MnL](ClO₄) [X = OH (1–6)] along with a mononuclear manganese(III) complex (7) [Mn(L)(L′)(MeOH)₂] [HL′ = 2-(2-hydroxy-phen-yl)benzimidazole] and two carboxylate-bridged binuclear manganese(III) complexes (8) and (9) are described. The complexes have been characterized by the combination of i.r., u.v.-vis spectroscopy, magnetic moments and by their redox properties. The electronic spectra of all the complexes exhibit almost identical features consisting of two d–d bands at ca. 550 and 600 nm, one MLCT band at ca.400 nm, together with two π–π^* intra-ligand transitions at ca. 250 nm and ca.300 nm. Room temperature magnetic data range from μ = 2.7–3.0 BM indicates some super-exchange between the binuclear metal centers via bridging hydroxo/carboxylato groups. The X-ray crystal structure of the binuclear complex (5) revealed that it has a symmetric Mn^IIIN₂O₂ core bridged by a hydroxyl group. The X-ray analysis of the mononuclear complex (7) showed that the manganese-center possesses a distorted octahedral geometry. Electrochemical properties of hydroxo-bridged manganese(III) complexes (1–6) show identical features consisting of an irreversible and a quasi-reversible reduction corresponding to the Mn₂^III → Mn^IIMn^III → Mn^IIMn^II couples in the voltammogram. It was found that electron withdrawing substituents on the ligand result in easier reduction. Complex (7) displays an irreversible reduction at 0.08 V and a reversible oxidation at 0.45V assignable to the Mn^III → Mn^II reduction and Mn^III → Mn^IV oxidation, respectively. The carboxylate-bridged compound (8) exhibits two irreversible oxidations at 0.4 and 0.6 V, probably due to Mn₂^III → Mn^IIIMn^IV → Mn^IVMn^IV oxidations and shows a quasi-reversible reductive wave at −0.85 V, tentatively assigned to Mn₂^III → Mn^IIMn^III reduction.     

Liquid crystalline salen manganese(III) complexes. Mesomorphic and catalytic behaviour

Several salen manganese(III) complexes displaying stable columnar mesophases in a wide range of temperatures have been synthesized. In condensed phases the molecules are assembled into dimers through intermolecular manganese-oxygen interactions and the columnar structure of the mesophases consist of the stacking of supramolecular discs formed by the association of two or three dimers, depending on the number and location of alkoxy chains in the complex. The catalytic activity of the complexes in solution has been studied, and they behave as efficient homogeneous catalysts in the epoxidation of styrene with iodosylbenzene as oxidant.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Synthesis of new macrocyclic chiral manganese(III) Schiff bases as catalysts for asymmetric epoxidation

We describe a general synthetic strategy for the preparation of a series of macrocyclic chiral manganese(III) salen complexes. The developed reaction pathway allows the modulation of the different key groups, namely, the chiral diimine, the bulky substituents in positions 3 and 3', and the linker used in the macrocyclization of the Schiff base. The different complexes presented here illustrate these readily available structural variations. The catalytic properties of the catalysts (5 mol %) were improved for the asymmetric epoxidation of 2,2'-dimethylchromene with NaOCl or H2O2 as oxygen atom donor. A large range of enantiomeric excesses was obtained (ee values from 30% to 96%), depending on the features and the stability of the complexes. The most efficient catalyst, in terms of stereoinduction (ee value = 96%), contains a diiminocyclohexyl moiety, ethyl groups in positions 3 and 3', and a short polyether junction arm.     

Magnetic properties of a manganese(III) Chain with monoatomic bridges: catena-MnF(salen)

In the solid state, MnF(salen) forms chains wherein fairly linear fluoride bridges between high-spin Mn(III) centers are observed. We interpret the magnetic properties of these chains by use of the classical Fisher model and by use of the high-temperature expansion approach, as well as by exact matrix diagonalization of the spin Hamiltonian, of model rings. In solution, electron paramagnetic resonance shows the chains to be symmetrically cleaved to monomeric MnF(salen).     

Chiral Mn(III) salen complex immobilized on imidazole-modified mesoporous material via co-condensation method as an effective catalyst for olefin epoxidation

An imidazole modified mesoporous material has been prepared through a co-condensation procedure and adopted to covalently anchor chiral Mn(III) salen complex. The active centers in the as-synthesized catalyst were presented in the form of ionic species. The results of XRD, FTIR, DRUV-Vis, and N₂ sorption confirmed the successful immobilization of chiral Mn(III) salen complex inside the channels of the modified support and the maintenance of the mesoporous structure of parent support in the immobilized catalyst. This heterogeneous catalyst exhibited comparable catalytic activity and enantioselectivity to those of the homogeneous counterpart in the asymmetric epoxidation of unfunctionalized olefins. Furthermore, notably high turnover frequencies have been obtained over this heterogeneous catalyst for the relatively short reaction time and low catalyst amount, due in part to the ionic property as well as the uniform distribution of the active centers.     

A new heterogeneous chiral (salen)manganese(III) system for enantioselective epoxidation of non‐functionalized olefins

This communication describes the design and application of a novel catalytic epoxidation system derived from the initial immobilization of a homogeneous sulfonato (salen)Mn(III) complex on two solid carriers (silica gel and siliceous earth) and subsequent dispersion of the supported manganese complexes into ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMImPF₆) and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄) for recycling. The performance of chiral (salen)Mn(III) system in enantioselective epoxidation of olefins was investigated systematically. Even higher enantioselectivity than that of the homogeneous counterpart was obtained with similar catalytic activity. In particular, the best catalytic result is that the combination of the silica gel‐supported (salen)Mn(III) catalyst and BMImPF₆ affords 97–100% ee for epoxidation of α‐methylstyrene, and high ee values were retained even after three cycles. Copyright © 2010 John Wiley & Sons, Ltd.     

A convenient resolution of long-chain alkyl epoxides with Jacobsen's salen(Co)III(OAc) catalysts

Non-racemic terminal long-chain alkyl epoxides are prepared from racemic epoxides and 1 mol% (R,R)- and (S,S)-salen(Co)III catalysts following a modified procedure for kinetic resolution. The ee's for all epoxides (C-10, C-12, C-14, C-16, C-18, C-20) exceed 95% and the chemical yields range from 85% to 95%.     

Some novel manganese(III) porphyrins with catalytic properties

Abstract

A series of manganese(III) porphyrins with 4-methylimidazole have been prepared. These are high-spin complexes having general formula [Mn^III(THMPP)X(4-MeIm)], where THMP?=?5,10,15,20-tetra(4-hydroxy-3-methoxyphenyl)porphine ligand, X?=?Cl^?, Br^?, NCS^?, or N₃^? and 4-MeIm?=?4-methylimidazole. All the complexes have been characterized by UV-visible, FT-IR, ESI-MS spectra, elemental analyses and magnetic susceptibility measurements. These manganese(III) porphyrins oxidize aromatic alcohols to aldehydes. The oxidation reactions have been carried out at room temperature in the presence of oxidants such as NaIO₄, H₂O₂, and NaOCl. The comparative studies proved that NaIO₄ behaves as the most efficient oxidant in these oxidative transformation reactions.     

Electronic effects in (salen)Mn-based epoxidation catalysts

Presented are density functional calculations on various Mn(salen) systems that are active catalysts in the epoxidation of olefins. Correlation of various structural properties such as Mn=O bond strengths, atomic charges, and C-O distances of evolving bonds in transition state geometries with modified Hammett constants reveal a mechanistic picture of the epoxidation reaction, supporting previous experimental results. Enantioselectivity is tied to the position of a transition state along the reaction coordinate for the first C-O bond formation step, when an olefin is approaching the epoxidation catalyst. Electronic effects exhibited by the 5,5' substituents of the salen ligand manifest themselves in a tuning of the Mn=O bond strength, which in turn influences the C-O distance of the forming bond in the transition state geometry.     

Enantioselective epoxidation of isoflavones by Jacobsen's Mn(III)salen catalysts and dimethyldioxirane oxygen-atom source

The catalytic enantioselective epoxidation of the isoflavones 1a–f has been performed by the Mn(III)salen complexes (R,R)-3 and (S,S)-3 as catalysts and dimethyldioxirane as the oxygen-atom source to afford optically active isoflavone epoxides 2a–f. The absolute configuration of the nonracemic epoxides 2 have been determined by X-ray diffraction analysis. Our present results constitute the first examples of the preparation of optically active isoflavone epoxides.     

Aminopropyl group-modified SBA-15 covalent attachment Mn(salen) complexes as catalysts for styrene epoxidation

A series of aminopropyl group-modified ordered mesoporous silica materials impregnated with Mn(salen) were prepared using successive grafting procedures. The prepared composite catalysts were well characterized by inductively coupled plasma atomic emission spectroscopy, Fourier transform-infrared, UV–Vis diffuse reflectance spectroscopy, X-ray diffraction analysis, and transmission electron microscopy in order to confirm the structure integrities of the Mn(salen) units after the incorporation, to evidence the formation of a covalent bond between the starting Mn(salen) units and the aminopropyl group-modified SBA-15 matrix in the presence of NaOH by abstraction of an HCl molecule. These heterogeneous catalysts exhibited comparable catalytic activity and selectivity to those of the homogeneous counterpart in the epoxidation of styrene by using NaClO as oxidant. In addition, the effects of key reaction parameters, including the loadings of the neat Mn(salen), molar ratios of NaClO to styrene, and PPNO amount on the reactivity and selectivity, were also studied. Finally, the reusability of the prepared heterogeneous catalyst was evaluated.     

Platinum(II) complexes bearing bulky Schiff base ligands anchored onto mesoporous SBA‐15 supports as efficient catalysts for hydrosilylation

Reported herein is an easy‐to‐prepare novel heterogeneous catalyst of platinum complexes bearing binary ligands of bidentate naphthalenolimine and cyclo‐1,5‐octadiene that are anchored onto mesoporous silica SBA‐15. The presence of the binary ligands not only stabilized the platinum, but also enabled the platinum atoms to form nanoclusters with diameters of ca 1 nm, and led to high platinum loading (8.69 wt%). Moreover, the platinum catalyst exhibited high catalytic activity towards hydrosilylation of terminal alkenes and styrene with silanes under mild and solvent‐free conditions, with excellent regioselectivity.