Investigation of metal-oligonucleotide complexes by nanoelectrospray tandem mass spectrometry in the positive mode

The formation and fragmentation of multiply metal-coordinated oligonucleotides was studied by nanoelectrospray tandem mass spectrometry in the positive ion mode. Fundamental aspects of the gas-phase behavior of metal-oligonucleotide complexes are revealed. The addition of transition metal ions, such as iron(II), iron(III), and zinc(II), leads to very stable metal-oligonucleotide complexes which show heavily altered fragmentation patterns in contrast to uncomplexed oligonucleotides. The site of metal ion complexation was located by collision-induced dissociation (CID) experiments. It was found that all three metal ions investigated predominantly coordinate to the central phosphate groups of the oligonucleotides. Furthermore, it is demonstrated that the fragmentation of such complexes depends highly upon the metal ion complexed as well as on the sequence of the nucleobases in the oligonucleotide.     

Formation and characterization of iron-oligonucleotide complexes with matrix-assisted laser desorption/ionization Fourier transform ion cyclotron resonance mass spectrometry

Iron-containing oligonucleotide negative ions can be generated by matrix-assisted laser desorption/ionization from a stainless steel target disk (by either defocusing the laser beam or by mixing iron salts such as FeCl3 with the matrix compound during the sample preparation). High resolution mass measurements reveal the presence of both Fe2+ (as M + Fe - 3H)- and Fe3+ (as M + Fe - 4H)- in the metal-oligonucleotide ions. The presence of Fe3+ is unexpected, and must involve replacement of protons from the nucleic bases or ribose groups as well as the phosphate groups of the oligonucleotides. Inspection of a range of small oligonucleotides and mononucleotides reveals that the presence of both Fe2+ and Fe3+ in the iron-biomolecule complexes is dependent on the number of acidic hydrogens that can be replaced in the oligonucleotide or nucleotide. Collisional dissociation of several metal-tetranucleotide ions revealed that the presence of the iron ion alters the fragmentation observed. The iron atom was observed to be present in all of the fragment ions, and, whenever possible, seemed to enhance the abundance of fragment ions containing both iron and a guanine nucleic base. These results suggest that iron may serve as a useful probe for characterizing phosphorylated biomolecules.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Synthesis, magnetic, spectral, and antimicrobial studies of Cu(II), Ni(II) Co(II), Fe(III), and UO2(II) complexes of a new Schiff base hydrazone derived from 7-chloro-4-hydrazinoquinoline

A new hydrazone ligand, HL, was prepared by the reaction of 7-chloro-4-hydrazinoquinoline with o-hydroxybenzaldehyde. The ligand behaves as monoprotic bidentate. This was accounted for as the ligand contains a phenolic group and its hydrogen atom is reluctant to be replaced by a metal ion. The ligand reacted with Cu(II), Ni(II), Co(II), Fe(III), and UO2(II) ions to yield mononuclear complexes. In the case of Fe(III) ion two complexes, mono- and binuclear complexes, were obtained in the absence and presence of LiOH, respectively. Also, mixed ligand complexes were obtained from the reaction of the metal cations Cu(II), Ni(II) and Fe(III) with the ligand (HL) and 8-hydroxyquinoline (8-OHqu) in the presence of LiOH, in the molar ratio 1:1:1:1. It is clear that 8-OHqu behaves as monoprotic bidentate ligand in such mixed ligand complexes. The ligand, HL, and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass, and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square-planar geometry, while Ni(II) mixed complex has also formed a tetrahedral configuration and UO2(II) complex which formed a favorable pentagonal biprymidial geometry. Magnetic moment of the binuclear Fe(III) complex is quite low compared to calculated value for two iron ions complex and thus shows antiferromagnetic interactions between the two adjacent ferric ions. The HL and metal complexes were tested against one stain Gram positive bacteria (Staphylococcus aureus), Gram negative bacteria (Escherichia coli), and fungi (Candida albicans). The tested compounds exhibited higher antibacterial acivities.     

Dissociation of gas-phase dimeric complexes of lactic acid and transition-metal ions formed under electrospray ionization conditions; the role of reduction of the metal ion

Dimeric complex ions of the type [M(A-H)A]+, where M=metal ion (Co, Ni, Cu, and Zn) and A=ligand (lactic acid, methyl lactate or ethyl lactate), were generated in the gas phase under electrospray ionization conditions. The collision-induced dissociation spectra of [M(A-H)A]+ ions were recorded to study the behaviour of ligand and metal ions in decomposition of these dimeric complex ions. Based on the fragmentation pathways observed for complex ions of lactic acid, it is found that both the carboxylic and hydroxyl groups of lactic acid are involved in the complex formation following displacement of a proton by the metal ion. The dimeric complex ions of Co, Ni, and Zn dissociated to yield similar types of ions, whereas that of Cu behaved differently. The dissociations of Co-, Ni-, and Zn-bound dimeric complexes involved losses of neutral molecules while keeping the oxidation state of the metal ion unchanged. However, elimination of radicals is found in the dissociation of dimeric complex ions of Cu, and the oxidation state of copper is reduced from Cu(II) to Cu(I) in the resulting fragment ions. The deprotonated ligand is involved in the fragmentation pathway of Cu complexes, whereas it is intact in other complexes. The oxidation state of the metal ion, nature of the ligand, and site of attachment to the metal ion are found to control the dissociation of these dimeric complex ions.     

Studies on the liquid-liquid extraction of iron(III) and titanium(IV) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of iron(III) and titanium(IV) from acidic chloride solutions has been investigated using 3-phenyl-4-benzoyl-5-isoxazolone (HPBI) in xylene as an extractant. The results demonstrate that these metal ions are extracted into xylene as Fe(PBI)(3) and TiO(PBI)(2). The equilibrium constants of the extracted complexes have been deduced by non-linear regression analysis by taking into account complexation of metal ion with inorganic ligands in the aqueous phase and all plausible complexes extracted into the organic phase. IR and proton NMR ((1)H NMR) spectra were used to further clarify the nature of complexes extracted into organic phase. The effect of the nature of the diluent on the extraction of iron(III) and titanium(IV) has been studied and correlated with dielectric constants. The extraction behaviour of titanium(IV) has also been compared with that of other metal ions, viz. magnesium(II), vanadium(V), chromium(VI), iron(III), manganese(II), zinc(II) and zirconium(IV), which are associated with the titanium in waste chloride liquors of the titanium-mineral-processing industry.     

Polymer supported catalysts for oxidation of phenol and cyclohexene using hydrogen peroxide as oxidant

Polymer supported transition metal complexes of N,N′-bis (o-hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by anchoring its amino derivative Schiff base (AHPHZ) on cross-linked (6 wt%) polymer beads and then loading iron(III), copper(II) and zinc(II) ions in methanol. The loading of HPHZ Schiff base on polymer beads was 3.436 mmol g⁻¹ and efficiency of complexation of polymer anchored HPHZ Schiff base for iron(III), copper(II) and zinc(II) ions was 83.21, 83.40 and 83.17%, respectively. The efficiency of complexation of unsupported HPHZ Schiff base for these metal ions was lower than polymer supported HPHZ Schiff base. The structural information obtained by spectral, magnetic and elemental analysis has suggested octahedral and square planar geometry for iron(III) and copper(II) ions complexes, respectively, with paramagnetic behavior, but zinc(II) ions complexes were tetrahedral in shape with diamagnetic behavior. The complexation with metal ions has increased thermal stability of polymer anchored HPHZ Schiff base. The catalytic activity of unsupported and polymer supported HPHZ Schiff base complexes of metal ions was evaluated by studying the oxidation of phenol (Ph) and epoxidation of cyclohexene (CH). The polymer supported metal complexes showed better catalytic activity than unsupported metal complexes. The catalytic activity of metal complexes was optimum at a molar ratio of 1:1:1 of substrate to oxidant and catalyst. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) in oxidation of phenol and epoxidation of cyclohexene was better with polymer supported metal complexes in comparison to unsupported metal complexes. The energy of activation for oxidation of phenol (22.8 kJ mol⁻¹) and epoxidation of cyclohexene (8.9 kJ mol⁻¹) was lowest with polymer supported complexes of iron(III) ions than polymer supported Schiff base complexes of copper(II) and zinc(II) ions.     

Spectrophotometric estimation of cobalt(II) with nitrilotriacetic acid

A convenient and efficient method for the estimation of cobalt(II) ions in the presence of other metal ions is described. Interference of metal ions such as iron(II), iron(III), nickel(II), manganese(II), and copper(II) have been investigated. Only iron(III) ions seriously affect this determination. Copper(II) and nickel(II) ions do not interfere if present in a molar-ratio less than 1:2 in the cobalt(II) ion solution. Cobalt(II)-nickel(II) and cobalt(II)-copper(II) binary mixtures can be efficiently analyzed at selective wavelengths.     

Synthesis and characterization of transition metal complexes of N′-[(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)methylene]thiophene-2-carbohydrazide

A hydrazone ligand (HL) containing the thiophene moiety has been prepared via condensation of thiophene-2-carbohydrazide with 1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazole-4-carbaldehyde. The complexes of copper(II), nickel(II), cobalt(II), manganese(II), zinc(II), palladium(II), iron(III), ruthenium(III), uranyl(VI), and titanium(IV) with the ligand were prepared in good yield from the reaction of the ligand with the corresponding metal salts. The ligand and complexes were characterized using infrared, mass spectra, nuclear magnetic resonance, electronic absorption spectra, electron spin resonance, and magnetic moment measurements as well as elemental and thermal analyses. The results showed that the complexes are enolic by nature, whilst the ratio between the metal ion and the ligand depends on the acidity of the metallic ions and their oxidation numbers.     

Catalytic activities of polymer‐supported metal complexes in oxidation of phenol and epoxidation of cyclohexene

The metal complexes of N, N′‐bis (o‐hydroxy acetophenone) propylene diamine (HPPn) Schiff base were supported on cross‐linked polystyrene beads. The complexation of iron(III), copper(II), and zinc(II) ions on polymer‐anchored HPPn Schiff base was 83.4, 85.7, and 84.5 wt%, respectively, whereas the complexation of these metal ions on unsupported HPPn Schiff base was 82.3, 84.5, and 83.9 wt%. The iron(III) complexes of HPPn Schiff base were octahedral in geometry, whereas copper(II) and zinc(II) ions complexes were square planar and tetrahedral. Complexation of metal ions increased the thermal stability of HPPn Schiff base. Catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in the presence of hydrogen peroxide. The polymer‐supported HPPn Schiff base complexes of iron(III) ions showed 73.0 wt% conversion of phenol and 90.6 wt% conversion of cyclohexene at a molar ratio of 1:1:1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 63.8 wt% conversion for phenol and 83.2 wt% conversion for cyclohexene. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 93.1 and 98.3 wt%, respectively with supported HPPn Schiff base complexes of iron(III) ions but was lower with HPPn Schiff base complexes of copper(II) and zinc(II) ions. Activation energy for the epoxidation of cyclohexene and phenol conversion with unsupported HPPn Schiff base complexes of iron(III) ions was 16.6 kJ mol^?1 and 21.2 kJ mol^?1, respectively, but was lower with supported complexes of iron(III) ions. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and spectroscopic studies of binuclear metal complexes of a tetradentate N2O2 Schiff base ligand derived from 4,6-diacetylresorcinol and benzylamine

A tetradentate N2O2 donor Schiff base ligand, H2L, was synthesized by the condensation of 4,6-diacetylresorcinol with benzylamine. The structure of the ligand was elucidated by elemental analyses, IR, 1H NMR, electronic and mass spectra. Reaction of the Schiff base ligand with nickel(II), cobalt(II), iron(III), cerium(III), vanadyl(IV) and uranyl(VI) ions in 1:2 molar ratio afforded binuclear metal complexes. Also, reaction of the ligand with several copper(II) salts, including Cl-, NO3-, AcO-, ClO4- and SO42- afforded different metal complexes that reflect the non-coordinating or weakly coordinating power of the ClO(4)(-) anion as compared to the strongly coordinating power of SO42- and Cl- anions. Characterization and structure elucidation of the prepared complexes were achieved by elemental and thermal analyses, IR, 1H NMR, electronic, mass and ESR spectra as well as magnetic susceptibility measurements. The metal complexes exhibited different geometrical arrangements such as square planar, octahedral, square pyramidal and pentagonal bipyramidal arrangements. The variety in the geometrical arrangements depends on the nature of both the anion and the metal ion.     

Metal binding characteristics of a laterally nonsymmetric aza cryptand upon functionalization with a pi-acceptor group

The laterally nonsymmetric aza cryptand synthesized by condensing tris(2-aminoethyl)amine (tren) with tris[[2-(3-(oxomethyl)phenyl)oxy]ethyl]amine readily forms mononuclear inclusion complexes with both transition and main-group metal ions. In these complexes, the metal ion occupies the tren-end of the cavity making bonds with the three secondary amino and the bridgehead N atoms. When a strong pi-acceptor group such as 2,4-dinitrobenzene is attached to one of the secondary amines, the binding property of the cryptand changes drastically. When perchlorate or tetrafluoroborate salts of Ni(II), Cu(II), Zn(II), or Cd(II) are used, the metal ion enters the cavity which can be monitored by the hypsochromic shift of the intramolecular charge-transfer transition from the donor amino N atom to the acceptor dinitrobenzene. However, in the presence of coordinating ions such as Cl(-), N(3)(-), and SCN(-), the metal ion comes out of the cavity and binds the cryptand outside the cavity at a site away from the dinitrobenzene moiety. Four such complexes are characterized by X-ray crystallography. Thus, a metal ion can translocate between inside and outside of the cryptand cavity depending upon the nature of the counter anion.     

芳香族羟肟及其过渡金属配合物的质谱研究

本文报道某些芳香族羟肟及其过渡金属铜、镍、钴和铁配合物的EI质谱,借助亚稳跃迁、高分辨质谱和稳定同位素^1^5N、^6^3Cu、和^6^5Cu标记物,讨论其断裂途径,总结断裂规律.     

Investigation on C2-ceramide complexes with transition metal ions using electrospray ionization tandem mass spectrometry

Electrospray ionization-tandem mass spectrometry (ESI-MS/MS) is applied for the investigation of C(2)-ceramide complexes with transition metal ions. Ceramide plays an important role in the regulation of various signaling pathways leading to proliferation, differentiation or apoptotic cell death. The formation and fragmentation of doubly charged cluster ions as well as singly charged cluster ions of C(2)-ceramide with transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+)) are studied by ESI-MS/MS in the positive mode. Tube lens offset voltage and concentrations of C(2)-ceramide and transition metals are optimized to determine the best conditions for generating doubly charged cluster ions. The fragmentation pathways of metal ion complexes with C(2)-ceramide and the compositions of these complexes are determined by collision induced dissociation (CID). All transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+) except Cu(2+)) shows similar complexation with C(2) ceramide. The unique complexation behavior of copper(II) is responsible for the different geometry of the complexes and relatively lower affinity of ceramide to copper(II) than those to other transition metals.     

MASS SPECTRAL FRAGMENTATION STUDIES ON THIOPHENOTROPONE AND THIOPHENOTROPILIDENE DERIVATIVES AND THEIR METAL TRICARBONYL COMPLEXS

Abstract

The mass spectral fragmentation of thiophenotropone, thiophenotropilidene derivatives and their iron and chromium tricarbonyl complexes are fully reported and discussed. The fragmentation patterns of the complexes are characterised by successive loss of three carbonyl groups. In general, the resulting ions after elimination of the metal behave in the same manner as the organic ligand. The iron complexes behave differently from their corresponding chromium complexes. The thiopheno[b]tropilidene iron tricarbonyl complex and its isomer thiopheno[c]tropilidene iron tricarbonyl complex could not be differentiated by mass spectrometry, such differentiation was achieved by proton magnetic resonance.     

Preparation and Characterization of Polyesterurethane Metallopolymers Containing Transition Metal Ions

Several series of metallopolymers (MP) were synthesized from a MDI-based polyesterurethane and various transition metal ion species, namely, copper(II), manganese(II), cobalt(II), iron(III) and chromium(III). Each series of MP were prepared by using different initial molar ratios urethane groups/metal ions (U/M). MP were characterized in comparison with the parent polyurethane (PU) by atomic absorption spectrometry (AAS), UV-vis absorption spectroscopy, FT-IR spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA) and tensile testing. The transition metal ions form coordination complexes with polyurethane functional groups, the intermolecular complexation resulting in the crosslinking of polymer chains. As a consequence, modifications take place in the original structure of PU, e.g. hydrogen bonding and crystallinity of the hard-segment domains. MP compared with PU present differences in viscoelastic and mechanical behaviors, which generally indicate the reinforcing effect of metal ions on the polyurethane matrix, as well in thermal stability. It was revealed that each transition metal ion has specific effects on the structure and properties of PU. The implications and mechanisms behind these observations are discussed.     

Speciation of Charged Complexes by Donnan Dialysis

Abstract

The assignment of metal complexes to various regimes on the basis of their dissociation kinetics is one type of metal speciation study. The most common scheme, which involves column ion-exchange as a means of separating free metal ions and metals in the form of highly labile complexes from other forms of metals in the sample, is demonstrated to categorize incorrectly stable, charged complexes such as iron(II) and nickel(II) o-phenanthroline as labile. Donnan dialysis is an alternative ion-exchange method for metal speciation studies. Data are provided which demonstrate that the above complexes are correctly assigned by the Donnan dialysis method. The relative labilities of ethylenediamine and triethylenetetramine complexes of iron (II) and nickel (II) are also correctly determined by Donnan dialysis.     

Mass spectrometric studies on small open-chain piperazine-containing ligands and their transition metal complexes

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry was used to characterize the complexes formed between open-chain piperazine-containing ligands and transition metal salts (Cobalt, Copper, Zinc, and Cadmium as chlorides, nitrates, and acetates). Only single-charged complexes were observed, formed of one ligand (L) and mainly one metal ion (M). Since the net charge of the complexes was one, a counterion (X) was attached to some of the complexes, with formation of [L + M + X]+ complexes, and a proton was lost from others, as in [L - H + M]+ complexes. In most cases the composition of the complexes was more dependent on the ligand than the metal salt. Collision-induced dissociation measurements showed that complexes with related composition often differed in structure, or that interactions between the ligand and the metal ion were not alike. The metal ion influenced considerably the fragmentation pathways of the ligands, so that the fragmentation products could be used to deduce the binding sites of the metal. The variations observed in fragmentation behavior of complexes possessing the same ligand but different metal ions can mostly be explained by the ionic radius and electronic configuration of the metal ion. The results indicated a preference of the piperazine ring of the coordinated ligand for the boat conformation.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Complexes of diethylenetriaminepentaacetic acid as contrast agents in NMR imaging. Computer simulation of equilibria in human blood plasma

In magnetic resonance imaging (MRI), the degree of contrast can be improved by using suitable contrast agents. The diethylenetriaminepentaacetic acid (DTPA) complexes of paramagnetic ions have been proposed for this purpose. This paper deals with extensive simulations of the distribution of species in blood plasma when solutions of manganese(II), copper(II), iron(III) and gadolinium(III) ions (as their soluble salts and as DTPA complexes) are injected. The various interaction equilibria, for which formation constants are known, are considered in order to assess toxic side-effects associated with their use in MRI. The data obtained support from the thermodynamic point of view, the use of GdDTPA, and suggest that the administration of a slight excess of ligand would guarantee complete coordination of the toxic gadolinium ion, and only minor interaction with the metal ions naturally present in blood plasma.