Borate-catalyzed reactions of hydrogen peroxide: kinetics and mechanism of the oxidation of organic sulfides by peroxoborates

The kinetics of the oxidation of substituted phenyl methyl sulfides by hydrogen peroxide in borate/boric acid buffers were investigated as a function of pH, total peroxide concentration, and total boron concentration. Second-order rate constants at 25 degrees C for the reaction of methyl 4-nitrophenyl sulfide and H(2)O(2), monoperoxoborate, HOOB(OH)(3) (-), or diperoxoborate, (HOO)(2)B(OH)(2) (-), are 8.29 x 10(-5), 1.51 x 10(-2) and 1.06 x 10(-2) M(-1) s(-1), respectively. Peroxoboric acid, HOOB(OH)(2), is unreactive. The Hammett rho values for the reactions of a range of substituted phenyl methyl sulfides and hydrogen peroxide, monoperoxoborate or diperoxoborate are -1.50 +/- 0.1, -0.65 +/- 0.07 and -0.48 (two points only), respectively. The rho values for the peroxoborates are of significantly lower magnitude than expected from their reactivity compared to other peroxides. Nevertheless the negative rho values indicate positive charge development on the sulfur atom in the transition state consistent with nucleophilic attack by the organic sulfides on the peroxoborates as with the other peroxides. The kinetic parameters, including the lack of reactivity of peroxoboric acid, are discussed in terms of the differences in the transition state of reactions involving peroxoboron species with respect to those of other peroxides.     

Dioxaborirane: a highly reactive peroxide that is the likely intermediate in borate catalysed electrophilic reactions of hydrogen peroxide in alkaline aqueous solution

This paper reports on a kinetic and theoretical study into the borate mediated reaction of dimethyl sulfide with hydrogen peroxide in both acid and alkaline conditions. At high pH, whilst the kinetic data is consistent with the catalytic species being monoperoxoborate, formed from the rapid equilibrium between hydrogen peroxide and boric acid, DFT calculations show that this species is in fact less reactive than hydrogen peroxide, requiring us to seek an alternative catalytic mechanism. DFT provides an important insight for this, showing that although boric acid and peroxoboric acid are primarily Lewis acids, they can exhibit a small degree of Br?nsted acidity, allowing, respectively, the B(O)(OH)(2)(-) and HOOB(OH)(O)(-) anions to exist in small concentrations. Whilst the peroxoborate anion, HOOB(OH)(O)(-), is predicted to have only marginal catalytic activity, its tautomer, dioxaborirane, (HO)(2)BO(2)(-), a three membered cyclic peroxide, has a very low activation barrier of 2.8 kcal/mol. Hence, even though dioxaborirane is likely to be present in very low concentrations, it is still sufficiently reactive for overall rate enhancements to be observed for this system. This is the first literature report of this species. The observed low selectivity observed for borate catalysed reactions of hydrogen peroxide with a range of substituted phenyl methyl sulfides in our previous study (D. M. Davies, M. E. Deary, K. Quill and R. A. Smith, Chem.-Eur. J. 2005, 11, 3552-3558) is further evidence in favour of a highly reactive catalytic species. At low pH, kinetic data shows that borate catalyses the reaction between hydrogen peroxide and dimethyl sulfide; this is supported by DFT calculations that predict peroxoboric acid to be an effective catalytic intermediate, with an energy barrier of 7.4 kcal mol(-1) compared to 10.1 kcal mol(-1) for the uncatalysed system. Nevertheless, the overall contribution of this pathway is small because of the unfavourable equilibrium between hydrogen peroxide and boric acid to form peroxoboric acid.     

Photohydroxylation of 1,4-benzoquinone in aqueous solution revisited

In water, photolysis of 1,4-benzoquinone, Q gives rise to equal amounts of 2-hydroxy-1,4-benzoquinone HOQ and hydroquinone QH(2) which are formed with a quantum yield of Phi=0.42, independent of pH and Q concentration. By contrast, the rate of decay of the triplet (lambda(max)=282 and approximately 410 nm) which is the precursor of these products increases nonlinearly (k=(2-->3.8) x 10(6) s(-1)) with increasing Q concentration ((0.2-->10) mM). The free-radical yield detected by laser flash photolysis after the decay of the triplet also increases with increasing Q concentration but follows a different functional form. These observations are explained by a rapid equilibrium of a monomeric triplet Q* and an exciplex Q(2)* (K=5500+/-1000 M(-1)). While Q* adds water and subsequent enolizes into 1,2,4-trihydroxybenzene Ph(OH)(3), Q(2)* decays by electron transfer and water addition yielding benzosemiquinone (.)QH and (.)OH adduct radicals (.)QOH. The latter enolizes to the 2-hydroxy-1,4-semiquinone radical (.)Q(OH)H within the time scale of the triplet decay and is subsequently rapidly (microsecond time scale) oxidized by Q to HOQ with the concomitant formation of (.)QH. On the post-millisecond time scale, that is, when (.)QH has decayed, Ph(OH)(3) is oxidized by Q yielding HOQ and QH(2) as followed by laser flash photolysis with diode array detection. The rate of this pH- and Q concentration-dependent reaction was independently determined by stopped-flow. This shows that there are two pathways to photohydroxylation; a free-radical pathway at high and a non-radical one at low Q concentration. In agreement with this, the yield of Ph(OH)(3) is most pronounced at low Q concentration. In the presence of phosphate buffer, Q* reacts with H(2)PO(4) (-) giving rise to an adduct which is subsequently oxidized by Q to 2-phosphato-1,4-benzoquinone QP. The current view that (.)OH is an intermediate in the photohydroxylation of Q has been overturned. This view had been based on the observation of the (.)OH adduct of DMPO when Q is photolyzed in the presence of this spin trap. It is now shown that Q*/Q(2)* oxidizes DMPO (k approximately 1 x 10(8) M(-1) s(-1)) to its radical cation which subsequently reacts with water. Q*/Q(2)* react with alcohols by H abstraction (rates in units of M(-1) s(-1)): methanol (4.2 x 10(7)), ethanol (6.7 x 10(7)), 2-propanol (13 x 10(7)) and tertiary butyl alcohol ( approximately 0.2 x 10(7)). DMSO (2.7 x 10(9)) and O(2) ( approximately 2 x 10(9)) act as physical quenchers.     

Chemical equilibria in the binary and ternary uranyl(VI)-hydroxide-peroxide systems

The composition and equilibrium constants of the complexes formed in the binary U(VI)-hydroxide and the ternary U(VI)-hydroxide-peroxide systems have been studied using potentiometric and spectrophotometric data at 25 °C in a 0.100 M tetramethylammonium nitrate medium. The data for the binary U(VI) hydroxide complexes were in good agreement with previous studies. In the ternary system two complexes were identified, [UO(2)(OH)(O(2))](-) and [(UO(2))(2)(OH)(O(2))(2)](-). Under our experimental conditions the former is predominant over a broad p[H(+)] region from 9.5 to 11.5, while the second is found in significant amounts at p[H(+)] < 10.5. The formation of the ternary peroxide complexes results in a strong increase in the molar absorptivity of the test solutions. The absorption spectrum for [(UO(2))(2)(OH)(O(2))(2)](-) was resolved into two components with peaks at 353 and 308 nm with molar absorptivity of 16200 and 20300 M(-1) cm(-1), respectively, suggesting that the electronic transitions are dipole allowed. The molar absorptivity of [(UO(2))(OH)(O(2))](-) at the same wave lengths are significantly lower, but still about one to two orders of magnitude larger than the values for UO(2)(2+)(aq) and the binary uranyl(VI) hydroxide complexes. It is of interest to note that [(UO(2))(OH)(O(2))](-) might be the building block in cluster compounds such as [UO(2)(OH)(O(2))](60)(60-) studied by Burns et al. (P. C. Burns, K. A. Kubatko, G. Sigmon, B. J. Fryer, J. E. Gagnon, M. R. Antonio and L. Soderholm, Angew. Chem. 2005, 117, 2173-2177). Speciation calculations using the known equilibrium constants for the U(vi) hydroxide and peroxide complexes show that the latter are important in alkaline solutions even at very low total concentrations of peroxide, suggesting that they may be involved when the uranium minerals Studtite and meta-Studtite are formed by α-radiolysis of water. Radiolysis will be much larger in repositories for spent nuclear fuel where hydrogen peroxide might contribute both to the corrosion of the fuel and to transport of uranium in a ground water system.     

Synthesis and structure of organic-soluble binuclear molecular phosphonates of tantalum,molybdenum, and tungsten

The reaction of (eta 5-C5Me5)TaMe4 with tert-butylphosphonic acid leads to the formation of a mixture of compounds: [[(eta 5-C5Me5)TaMe][t-BuP(O)(OH)][t-BuP(O)(OH)2]]2(t-BuPO3)2 (1) and [[(eta 5-C5Me5)Ta][t-BuP(O)(OH)2]]2(t-BuPO3)2(mu-O)2 (2). Compound 2 was also obtained by recrystallization of 1 from a THF/hexane mixture. Reaction of (eta 5-C5Me5)MCl4 (M = Mo, W) with PhP(O)(OH)2 yields the binuclear phosphonates [[(eta 5-C5Me5)M][PhP(O)(OH)2]]2(PhPO3)2(mu-O)2 (M = Mo (3); M = W (4)). Compounds 2.THF and 3(.)2.5THF were characterized by single-crystal X-ray studies. The tantalum and molybdenum phosphonates 2.THF and 3(.)2.5THF have different structures as compared to those of the previously reported titanophosphonate cages.     

Determination of borate ion-pair stability constants by potentiometry and non-approximative linearization of titration data

Borate anions, B(OH)(-)(4), are known to associate with alkali and alkaline-earth metal cations in sea-water. The borate cation ion-pairs are of the general form MB(OH)((n-1)+)(4), where M(n+) is the cation. In this work, the cation borate stability constants (K*(MB)) have been evaluated for Na(+), Li(+), Mg(2+), Ca(2+) and Sr(2+) where K*(MB) = [MB(OH(4))((n-1)+)]/[M(n+)][B(OH)(-)(4)]. The K*(MB) values were obtained from values found for the stability constant of boric acid (K*(B)) in various electrolyte media at 25 degrees and an ionic strength of 0.7. Acid-base potentiometric titrations were performed in the electrolyte media with a standard Pt/H(2) electrode and a junctionless Ag/AgCl reference electrode to monitor the emf. A non-approximative equation was used to linearize the titration data. The values obtained were: K*(Lib) = 0.89 +/- 0.02, K*(NaB) = 0.44 +/- 0.01, K*(MgB) = 13.6 +/- 0.7, K*(CaB) = 11.4 +/- 0.15, K*(SrB) = 3.47 +/- 0.06. The values for K*(MB) correlate with the charge-density parameter z(2)/(r + 0.85), where r is the radius of the cation. The speciation of boron in sea-water was predicted from the K*(MB), data for the major cations present.     

Quantum yields for OH production in the photodissociation of HNO(3) at 248 and 308 nm and H(2)O(2) at 308 and 320 nm

The quantum yields for OH formation from the photolysis of HNO(3) were measured to be (0.88 +/- 0.09) at 248 and (1.05 +/- 0.29) at 308 nm and of H(2)O(2) to be (1.93 +/- 0.39) at 308 and (1.96 +/- 0.50) at 320 nm. The quoted uncertainties are at the 95% confidence level and include estimated systematic uncertainties. OH radicals were produced using pulsed laser photolysis and monitored using pulsed laser-induced fluorescence. Quantum yields were measured relative to the OH quantum yields from a reference system. The measured quantum yields at 248 nm are in agreement with previous direct determinations. The quantum yield values at 308 and 320 nm are the first direct quantum yield measurements at these wavelengths and confirm the values currently recommended for atmospheric model calculations. Rate coefficients (at 298 K) for the OH + H(2)O(2) and OH + HNO(3) + M (in 100 Torr of N(2)) reactions were measured during this study to be (1.99 +/- 0.16) x 10(-12) cm(3) molecule(-1) s(-1) and (1.44 +/- 0.12) x 10(-13) cm(3) molecule(-1) s(-1), respectively.     

Atmospheric chemistry of diethyl methylphosphonate, diethyl ethylphosphonate, and triethyl phosphate

Rate constants for the reactions of OH radicals and NO(3) radicals with diethyl methylphosphonate [DEMP, (C(2)H(5)O)(2)P(O)CH(3)], diethyl ethylphosphonate [DEEP, (C(2)H(5)O)(2)P(O)C(2)H(5)], and triethyl phosphate [TEP, (C(2)H(5)O)(3)PO] have been measured at 296 +/- 2 K and atmospheric pressure of air using relative rate methods. The rate constants obtained for the OH radical reactions (in units of 10(-11) cm(3) molecule(-1) s(-1)) were as follows: DEMP, 5.78 +/- 0.24; DEEP, 6.45 +/- 0.27; and TEP, 5.44 +/- 0.20. The rate constants obtained for the NO(3) radical reactions (in units of 10(-16) cm(3) molecule(-1) s(-1)) were the following: DEMP, 3.7 +/- 1.1; DEEP, 3.4 +/- 1.4; and TEP, 2.4 +/- 1.4. For the reactions of O(3) with DEMP, DEEP, and TEP, an upper limit to the rate constant of <6 x 10(-20) cm(3) molecule(-1) s(-1) was determined for each compound. Products of the reactions of OH radicals with DEMP, DEEP, and TEP were investigated using in situ atmospheric pressure ionization mass spectrometry (API-MS) and, for the TEP reaction, gas chromatography with flame ionization detection (GC-FID) and in situ Fourier transform infrared (FT-IR) spectroscopy. The API-MS analyses show that the reactions are analogous, with formation of one major product from each reaction: C(2)H(5)OP(O)(OH)CH(3) from DEMP, C(2)H(5)OP(O)(OH)C(2)H(5) from DEEP, and (C(2)H(5)O)(2)P(O)OH from TEP. The FT-IR and GC-FID analyses showed that the major products (and their molar yields) from the TEP reaction are (C(2)H(5)O)(2)P(O)OH (65-82%, initial), CO(2) (80 +/- 10%), and HCHO (55 +/- 5%), together with lesser yields of CH(3)CHO (11 +/- 2%), CO (11 +/- 3%), CH(3)C(O)OONO(2) (8%), organic nitrates (7%), and acetates (4%). The probable reaction mechanisms are discussed.     

Determination of the mode and efficacy of the cross-linking of guar by borate using MAS 11B NMR of borate cross-linked guar in combination with solution 11B NMR of model systems

The reaction product of boric acid and the polysaccharide guaran (the major component of guar gum) has been investigated by 11B NMR spectroscopy. By comparison with the 11B NMR of boric acid and phenylboronic acid complexes of 1,2-diols (HOCMe2CMe2OH, cis-C6H10(OH)2, trans-C6H10(OH)2, o-C6H4(OH)2), 1,3-diols (neol-H2), monosaccharides (L-fucose, mannose and galactose) and disaccharides (cellobiose and sucrose) it is found that the guaran polymer is cross-linked via a borate complex of two 1,2-diols both forming chelate 5-membered ring cycles ([B5(2)]), this contrasts with previous proposals. Based upon steric constraints we propose that preferential cross-linking the guaran polymer occurs via the 3,4-diols of the galactose side chain. The DeltaH and DeltaS for complexation of boric acid to cis- and trans-1,2-cyclohexanediol have been determined, from the temperature dependence of the appropriate equilibrium constants, and used in conjunction with ab initio calculations on model compounds, to understand prior conflicting proposals for guaran-boric acid interactions. 11B NMR derived pH dependent equilibrium constants and ab initio calculations have been used to understand the reasons for the inefficiency of boric acid to cross-link guaran (almost 2 borate ions per 3 monosaccharide repeat units are required for a viscous gel suitable as a fracturing fluid): the most reactive sites on the component saccharides (mannose and galactose) are precluded from reaction by the nature of the guar structure; the comparable acidity (pKa) of the remaining guaran alcohol substituents and the water solvent, results in a competition between cross-linking and borate formation; a significant fraction of the boric acid is ineffective in cross-linking guar due to the modest equilibrium (Keq). In contrast to prior work, we present evidence for the reaction of alcohols with boric acid, rather than the borate anion. Based upon the results obtained for phenylboronic acid, alternative cross-linking agents are proposed.     

Atmospheric chemistry of dimethyl phosphonate, dimethyl methylphosphonate, and dimethyl ethylphosphonate

Rate constants for the reactions of OH radicals and NO3 radicals with dimethyl phosphonate [DMHP, (CH3O)2P(O)H], dimethyl methylphosphonate [DMMP, (CH3O)2P(O)CH3], and dimethyl ethylphosphonate [DMEP, (CH3O)2P(O)C2H5] have been measured at 296 +/- 2 K and atmospheric pressure using relative rate methods. The rate constants obtained for the OH radical reactions (in units of 10(-12) cm3 molecule(-1) s(-1)) were as follows: DMHP, 4.83 +/- 0.25; DMMP, 10.4 +/- 0.6; and DMEP, 17.0 +/- 1.0, with a deuterium isotope effect of k(OH + DMMP)/k(OH + DMMP-d9) = 4.8 +/- 1.2. The rate constants obtained for the NO3 radical reactions (in units of 10(-16) cm3 molecule(-1) s(-1)) were as follows: DMHP, < 1.4; DMMP, 2.0 +/- 1.0; and DMEP, 3.4 +/- 1.4. Upper limits to the rate constants for the O3 reactions of < 8 x 10(-20) cm3 molecule(-1) s(-1) for DMHP and < 6 x 10(-20) cm3 molecule(-1) s(-1) for DMMP and DMEP were determined. Products of the reactions of OH radicals with DMHP, DMMP, and DMEP were investigated in situ using atmospheric pressure ionization mass spectrometry (API-MS) and, for the DMMP and DMEP reactions, Fourier transform infrared (FT-IR) spectroscopy. API-MS analyses showed the formation of products of molecular weight 96 and 126, attributed to CH3OP(O)(H)OH and (CH3O)2P(O)OH, respectively, from DMHP; of molecular weight 110, attributed to CH3OP(O)(CH3)OH, from DMMP; and of molecular weight 124 and 126, attributed to CH3OP(O)(C2H5)OH and (CH3O)2P(O)OH, respectively, from DMEP. FT-IR analyses showed formation (values given are % molar yields) of the following: from DMMP, CO, 54 +/- 6; CO2, 5 +/- 1 in dry air; HCHO, 3.9 +/- 0.7; HC(O)OH, < 1.4 in dry air; RONO2, approximately 4; and formate ester, approximately 8; and from DMEP, CO, 50 +/- 7; CO2, 11 +/- 4; CH3CHO, 18 +/- 8; HCHO, < 7; HC(O)OH, < 6; RONO2, < or = 5; and formate ester, 5.0 +/- 1.5. Possible reaction mechanisms are discussed.     

Kinetics of the iodate reduction by hydrogen peroxide and relation with the Briggs-Rauscher and Bray-Liebhafsky oscillating reactions

The iodate reduction by hydrogen peroxide in acidic solutions is part of the Bray-Liebhafsky and Briggs-Rauscher oscillating reactions. At low hydrogen peroxide concentrations, typical of the Bray-Liebhafsky reaction, its rate law is -d[IO(-)(3)]/dt = (k'(R) + k"(R)[H(+)])[IO(-)(3)][H(2)O(2)] with k'(R) = 1.3 × 10(-7)(20°), 7.8 × 10(-7) (39°), 1.4 × 10(-5) M(-1) s(-1) (60°) and k"(R) = 1.5 × 10(-5) (25°), 6.2 × 10(-5) (39°), 6.3 × 10(-4) M(-2) s(-1) (60°). It is explained by a non-radical mechanism. At high hydrogen peroxide concentrations, typical of the Briggs-Rauscher reaction, a new reaction pathway appears with a rate more than proportional to [H(2)O(2)](2) and nearly independent of [IO(3)(-)] > 0.01 M. This pathway is inhibited by scavengers of free radicals. We suggest that it has a radical mechanism starting with IOH + H(2)O(2)? IOOH + H(2)O and IOOH+H(2)O(2)→ IO˙ + H(2)O+HOO˙.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Synthesis and structural characterization of bi- and trimetallic octacyanometalate(IV) complexes: [Delta,Lambda-MII(en)3][cis-MII(en)2(OH2)][MIV(CN)8].2H2O and [cis-MII(en)2(OH2)]2[(mu-NC)2MIV(CN)6].4H2O (MII = Mn, Co, Ni; MIV = Mo, W)

Treatment of [M(II)(en)(3)][OTs](2) or methanolic ethylenediamine solutions containing transition metal p-toluenesulfonates (M(II) = Mn, Co) with aqueous K(4)M(IV)(CN)(8).2H(2)O or Cs(3)M(V)(CN)(8) (M(IV) = Mo, W; M(V) = Mo) affords crystalline clusters of [M(II)(en)(3)][cis-M(II)(en)(2)(OH(2))(mu-NC)M(IV)(CN)(7)].2H(2)O (M(IV) = Mo; M(II) = Mn, 1; Ni, 5; M(IV) = W; M(II) = Mn, 2; Ni, 6) and [cis-M(II)(en)(2)(OH(2))](2)[(mu-NC)(2)M(IV)(CN)(6)].4H(2)O (M(IV) = Mo; M(II) = Co, 3; Ni, 7; M(IV) = W; M(II) = Co, 4) stoichiometry. Each cluster contains cis-M(II)(en)(2)(OH(2))(mu-NC)(2+) units that likely result from dissociative loss of en from [M(II)(en)(3)](2+), affording cis-M(II)(en)(2)(OH(2))(2)(2+) intermediates that are trapped by M(IV)(CN)(8)(4-).     

Effects of large halides on the structures of lanthanide(III) and plutonium(III) borates

Reactions of LnBr(3) or LnOI with molten boric acid result in formation of Ln[B(5)O(8)(OH)(H(2)O)(2)Br] (Ln = La-Pr), Nd(4)[B(18)O(25)(OH)(13)Br(3)], or Ln[B(5)O(8)(OH)(H(2)O)(2)I] (Ln = La-Nd). Reaction of PuOI with molten boric acid yields Pu[B(7)O(11)(OH)(H(2)O)(2)I]. The Ln(III) and Pu(III) centers in these compounds are found as nine-coordinate hula-hoop or 10-coordinate capped triangular cupola geometries where there are six approximately coplanar oxygen donors provided by triangular holes in the polyborate sheets. The borate sheets are connected into three-dimensional networks by additional BO(3) triangles and/or BO(4) tetrahedra that are roughly perpendicular to the layers. The room-temperature absorption spectrum of single crystals of Pu[B(7)O(11)(OH)(H(2)O)(2)I] shows characteristic f-f transitions for Pu(III) that are essentially indistinguishable from Pu(III) in other compounds with alternative ligands and different coordination environments.     

Esterification of borate with NAD+ and NADH as studied by electrospray ionization mass spectrometry and 11B NMR spectroscopy

This paper describes for the first time the direct measurement of boric acid (B(OH)(3)) and borate (B(OH)(4) (-)) adduction to NAD(+) and NADH by electrospray ionization mass spectrometry (ESI-MS) and (11)B NMR spectroscopy. The analysis demonstrates that borate binds to both cis-2,3-ribose diols on NAD(+) forming borate monoesters (1 : 1 addition), borate diesters (1 : 2 addition) and diborate esters (2 : 1 addition), whereas, only borate monoesters were formed with NADH. MS in the negative ion mode showed borate was bound to a cis-2,3-ribose diol and not to the hydroxyl groups on the phosphate backbone of NAD(+), and MS/MS showed that the 1 : 1 addition monoester contained borate bound to the adenosine ribose. Boron shifts of borate monoesters and diesters with NAD(+) were observed at 7.80 and 12.56 ppm at pH 7.0 to 9.0. The esterifications of borate with NAD(+) and NADH were pH dependent with maximum formation occurring under alkaline conditions with significant formation occurring at pH 7.0. Using ESI-MS, the limit of detection was 50 micro M for NAD(+) and boric acid (1 : 1) to detect NAD(+)-borate monoester at pH 7.0. These results suggest esterification of borate with nicotinamide nucleotides could be of biological significance.     

Kinetics and mechanisms of the oxidation of iodide and bromide in aqueous solutions by a trans-dioxoruthenium(VI) complex

The kinetics and mechanisms of the oxidation of I (-) and Br (-) by trans-[Ru (VI)(N 2O 2)(O) 2] (2+) have been investigated in aqueous solutions. The reactions have the following stoichiometry: trans-[Ru (VI)(N 2O 2)(O) 2] (2+) + 3X (-) + 2H (+) --> trans-[Ru (IV)(N 2O 2)(O)(OH 2)] (2+) + X 3 (-) (X = Br, I). In the oxidation of I (-) the I 3 (-)is produced in two distinct phases. The first phase produces 45% of I 3 (-) with the rate law d[I 3 (-)]/dt = ( k a + k b[H (+)])[Ru (VI)][I (-)]. The remaining I 3 (-) is produced in the second phase which is much slower, and it follows first-order kinetics but the rate constant is independent of [I (-)], [H (+)], and ionic strength. In the proposed mechanism the first phase involves formation of a charge-transfer complex between Ru (VI) and I (-), which then undergoes a parallel acid-catalyzed oxygen atom transfer to produce [Ru (IV)(N 2O 2)(O)(OHI)] (2+), and a one electron transfer to give [Ru (V)(N 2O 2)(O)(OH)] (2+) and I (*). [Ru (V)(N 2O 2)(O)(OH)] (2+) is a stronger oxidant than [Ru (VI)(N 2O 2)(O) 2] (2+) and will rapidly oxidize another I (-) to I (*). In the second phase the [Ru (IV)(N 2O 2)(O)(OHI)] (2+) undergoes rate-limiting aquation to produce HOI which reacts rapidly with I (-) to produce I 2. In the oxidation of Br (-) the rate law is -d[Ru (VI)]/d t = {( k a2 + k b2[H (+)]) + ( k a3 + k b3[H (+)]) [Br (-)]}[Ru (VI)][Br (-)]. At 298.0 K and I = 0.1 M, k a2 = (2.03 +/- 0.03) x 10 (-2) M (-1) s (-1), k b2 = (1.50 +/- 0.07) x 10 (-1) M (-2) s (-1), k a3 = (7.22 +/- 2.19) x 10 (-1) M (-2) s (-1) and k b3 = (4.85 +/- 0.04) x 10 (2) M (-3) s (-1). The proposed mechanism involves initial oxygen atom transfer from trans-[Ru (VI)(N 2O 2)(O) 2] (2+) to Br (-) to give trans-[Ru (IV)(N 2O 2)(O)(OBr)] (+), which then undergoes parallel aquation and oxidation of Br (-), and both reactions are acid-catalyzed.     

A Novel Inorganic-organic Hybrid Borate with Unique One-dimensional Infinite Aluminium-oxygen Chains

A novel inorganic-organic hybrid borate,[Al2(fum)(H3BO3)(OH) 4]n·n(H3BO3) (1,H2fum = fumaric acid) ,has been synthesized and characterized by single-crystal X-ray diffraction,FTIR and elemental analysis. Crystal data for compound 1: orthorhombic,space group Pnma,a = 14.108(3) ,b = 6.9412(14) ,c = 14.995(3) ,V = 1468.3(5) 3,Z = 4,Mr = 359.72,Dc = 1.627 g/cm3,μ = 0.254 mm-1,F(000) = 736,the final R = 0.0492 and wR = 0.1650 with I > 2σ(I) . In compound 1,each AlⅢ ion is coordinated by six oxygen atoms to adopt a distorted octahedral geometry. Both fumarate anion and the coordinated boric acid act as bidentate bridging ligands to link two neighboring AlⅢ centers simultaneously. Each AlⅢ ion is bridged by two μ2-hydroxyl ligands to construct an infinite wave-like [Al2(fum)(H3BO3)(OH) 4]n chain. These one-dimensional chains form hydrogen bonds with free boric acid molecules giving rise to a three-dimensional supramolecular network.     

An effective metallohydrolase model with a supramolecular environment: structures, properties, and activities

A supramolecular inclusion complex, [Zn(L1)(H2O)2(beta-CD)](ClO4)2.9.5 H2O (1) was synthesized and characterized structurally and its first-order active species for hydrolysis of esters, [Zn(L1)(H2O)(OH)(beta-CD)](ClO4) (2), was isolated (L1=4-(4'-tert-butylbenzyl)diethylenetriamine; beta-CD=beta-cyclodextrin). The apparent inclusion stability constant of the host and the guest measured in aqueous solution was (5.91+/-0.03)x10(3) for 1. The measured values of the first- and second-order pK(a) values of coordinated water molecules were 8.20+/-0.08 and 10.44+/-0.08, respectively, and were assigned to water molecules occupying the plane and remaining axial positions in a distorted trigonal bipyramid of the [Zn(L1)(H2O)2(beta-CD)]2+ sphere according to the structural analysis of [Zn(L2)(H2O)}2(mu-OH)](ClO4)3 (3) (L2=4-benzyldiethylenetriamine). p-Nitrophenyl acetate (pNA) hydrolysis catalyzed by 1 at pH 7.5-9.1 and 25.0+/-0.1 degrees C exhibited a first-order reaction with various concentrations of pNA and 1, but the pH profile did not indicate saturated kinetic behavior. Second-order rate constants of 0.59 and 24.0 M(-1) s(-1) were calculated for [Zn(L1)(H2O)(OH)(beta-CD)]+ and [Zn(L1)(OH)2(beta-CD)], respectively; the latter exhibited a potent catalytic activity relative to the reported mononuclear and polynuclear Zn(II) species.     

Mechanism of the reaction of radicals with peroxides and dimethyl sulfoxide in aqueous solution

The reactions of methyl and methylperoxyl radicals derived from dimethyl sulfoxide (DMSO) with hydrogen peroxide, peroxymonocarbonate (HCO4 (-)), and persulfate were studied. The major reaction observed for the hydroperoxides was the abstraction of the hydrogen atom by the radicals. The radicals interact with a lone pair of electrons on the peroxide to produce methanol and formaldehyde. Furthermore, the results indicate that in RO2H and RO2R', electron-withdrawing groups cause a considerable increase in the reactivity of the peroxides towards the radicals and not only towards nucleophiles. The HO2 (.)/O2 (.-) and CO3 (.-) radicals react with DMSO to produce methyl radicals. Thus, the formation of the (.)CH3 radicals in the presence of DMSO is not proof of the formation of the (.)OH radicals in the system. These reactions must be considered when radical processes, such as in biological and catalytic systems, are studied. Especially, the plausible role of HCO4 (-) ions in biological systems as a source of oxidative stress cannot be overlooked.     

Electroluminescent method for determining hydrogen peroxide and peroxydisulphate ions in aqueous solution using TiO(2) film electrodes

An electrochemical optical sensor system with luminescence response was proposed for the continuous determination of hydrogen peroxide or peroxydisulphate concentration in aqueous solutions. The electroluminescence (EL) of TiO(2) film electrodes, which arises under conditions of the cathodic polarization as a result of the hole injection into the TiO(2) from high-energy OH or SO(4)(2-) radicals produced by the electroreduction of H(2)O(2) or S(2)O(8)(2-) ions on the electrode surface, was used as the analytical signal. The EL response is linearly related, in a logarithmic scale, to the hydrogen peroxide or peroxydisulphate concentration ranging from 10(-3) to 10(-1) M H(2)O(2) and from 5 x 10(-4) to 1 M Na(2)S(2)O(8). It was shown that a substantial increase in the quantum efficiency of the EL and, as a consequence, in the sensitivity of the sensor system can be achieved by doping TiO(2) films with chromium. The potential dependence of the EL spectrum for TiO(2) electrodes in S(2)O(8)(2-) solutions differs essentially from that in H(2)O(2) solutions which allows measurement of the concentration of S(2)O(8)(2-) ions when they coexist with H(2)O(2) in solution.