Synthesis and characterization of amphoteric latex particles

Stable monodisperse amphoteric latex particles were prepared by the semibatch surfactant-free emulsion copolymerization of methyl methacrylate and methacrylic acid (MAA) initiated by 2,2'-azobis(2-amidinopropane) dihydrochloride (V-50). These submicron particles have a net positive charge, which is attributed to the ionized amino group at low pH. In contrast, they become negatively charged owing to the ionized carboxyl group at high pH. There exists a pH at which these particles exhibit a net charge of zero (pI). At a constant level of V-50, the pI value of these latices decreases with increasing amount of MAA used in the polymerization recipe. The effect of pH on the colloidal stability of these amphoteric latices toward the addition of the negatively charged latex was investigated. The resultant coagulation kinetics was used to study the electrostatic interaction between the amphoteric particles and negatively charged particles.     

Colloidal stability of sulfonated polystyrene model colloids. Correlation with electrokinetic data

In this work we describe the colloid stability of functionalized latexes: two sulfonated polystyrene model colloids with the same particle size and different surface charge densities. The critical coagulation concentration (ccc) was determined in the presence of two electrolytes (11 and 22), being around 0.75 M and 0.075 M, respectively. By the DLVO theory the electrokinetic and colloid stability data were correlated to calculate the Hamaker constant at both experimental conditions. By comparing the experimental and theoretical values of the Hamaker constant, it is possible to get more information about the colloidal stabilization mechanism of functionalized latexes. In the case of sulfonated latexes, the electrostatic and seric contributions occur, with different influence for each latex depending of their surface electric charge.     

Electrokinetic behavior and colloidal stability of polystyrene latex coated with ionic surfactants

This work is focused on analyzing the electrokinetic behavior and colloidal stability of latex dispersions having different amounts of adsorbed ionic surfactants. The effects of the surface charge sign and value, and the type of ionic surfactant were examined. The analysis of the electrophoretic mobility (mu(e)) versus the electrolyte concentration up to really high amounts of salt, much higher than in usual studies, supports the colloidal stability results. In addition, useful information to understand the adsorption isotherms was obtained by studying mu(e) versus the amount of the adsorbed surfactant. Aggregation studies were carried out using a low-angle light scattering technique. The critical coagulation concentrations (ccc) of the particles were obtained for different surfactant coverage. For latex particles covered by ionic surfactants, the electrostatic repulsion was, in general, the main contribution to the colloidal stability of the system; however, steric effects played an important role in some cases. For latices with not very high colloidal stability, the adsorption of ionic surfactants always improved the colloidal stability of the dispersion above certain coverage, independently of the sign of both, latex and surfactant charge. This was in agreement with higher mobility values. Several theoretical models have been applied to the electrophoretic mobility data in order to obtain different interfacial properties of the complexes (i.e., zeta potential and density charge of the surface charged layer).     

Stability of the polymerizable surfactant stabilized latex particles during semibatch emulsion polymerization

The effect of the polymerizable surfactant, sodium dodecyl allyl sulfosuccinate (JS-2), on the stability of polybutyl acrylate latex particles during semibatch emulsion polymerization was investigated in this work. Experimental data show that the ionic strength is the most important parameter in determining the latex stability during the reaction. Both the amount of coagulum produced by intensive coagulation and percentage of the particle volume change (ΔV) caused by limited flocculation increase with increasing electrolyte concentration. The parameter Δ V increases significantly when the concentration of JS-2 in the initial reactor charge ([JS-2]_i) increases. The amount of coagulum increases rapidly when the agitation speed is increased from 400 to 800 rpm. Experiments of coagulation kinetics were carried out to study the stability of latex products toward added salts. The experimental data show that the chemical stability of the latex product increases with increasing pH. Furthermore, the critical coagulation concentration and diffuse potential increase with increasing [JS-2]_i. It is postulated that the increasing electrostatic attraction force between two approaching particles due to the increased [JS-2] _i can increase the apparent magnitude of Hamaker constant.     

The effect of acrylic acid amount on the colloidal properties of polystyrene latex

Poly(styrene-co-acrylic acid) (St/AA) latices were prepared by using a batch soap-free emulsion copolymerisation in non-buffered medium. Polymerisation kinetics, followed by gravimetric method, revealed that increasing AA comonomer concentration was directly proportional to the copolymerisation rate, while adding AA comonomer caused a strong decrease of particle size of final St/AA latex particle without affecting the size distribution. Transmission electron microscopy indicated that the particles were monodispersed and spherical in shape irrespective of AA amount used in the investigated range. The colloidal stability of the latices was increased upon increasing the AA concentration; owing to the electrosteric stabilisation originated from AA-rich layer on the particle surface. In addition, electrophoretic mobility of formed particles versus polymerisation conversion exhibited the constancy of the surface charge density during the polymerisation process and was inferred for discussion of the polymerisation mechanism of this system.     

Experimental study of electrostatically stabilized colloidal particles: colloidal stability and charge reversal

We consider the interaction of colloidal spheres in the presence of mono-, di-, and trivalent ions. The colloids are stabilized by electrostatic repulsion due to surface charges. The repulsive part of the interaction potential Ψ(d) is deduced from precise measurements of the rate of slow coagulation. These "microsurface potential measurements" allow us to determine a weak repulsion in which Ψ(d) is of the order of a few k(B)T. These data are compared to ζ potential measured under similar conditions. At higher concentrations both di- and trivalent counterions accumulate at the very proximity of the particle surface leading to charge reversal. The salt concentration c(cr) at which charge reversal occurs is found to be always above the critical coagulation concentration c(ccc). The analysis of Ψ(d) and of the ζ potential demonstrates, however, that adsorption of multivalent counterions starts far below c(cr). Hence, colloid stability in the presence of di- and trivalent ions cannot be described in terms of a DLVO ansatz assuming a surface charge that is constant with regard to the ionic strength.     

A generalized model for the stability of polymer colloids

A generalized model has been proposed to describe the stability of polymer colloids stabilized with ionic surfactants by accounting simultaneously for the interactions among three important physicochemical processes: colloidal interactions, surfactant adsorption equilibrium, and association equilibria of surface charge groups with counterions at the particle-liquid interface. A few Fuchs stability ratio values, determined experimentally for various salt types and concentrations through measurements of the doublet formation kinetics, are used to estimate the model parameters, such as the surfactant adsorption and counterion association parameters. With the estimated model parameters, the generalized model allows one to monitor the dynamics of surfactant partitioning between the particle surface and the disperse medium, to analyze the variation of surface charge density and potential as a function of the electrolyte type and concentration, and to predict the critical coagulant concentration for fast coagulation. Three fluorinated polymer colloids, stabilized by perfluoropolyether-based carboxylate surfactant, have been used to demonstrate the feasibility of the proposed colloidal stability model.     

Electrosteric stability of styrene/acrylic acid copolymer latices under emulsion polymerization reaction conditions

Acrylic acid (AA) is used in many emulsion polymerization formulations to improve the colloidal stability during and after the production of latex products. Theoretically, the improved stability originates from electrostatic repulsion complemented with steric repulsion. The objective of this work was to study the contribution of AA to the colloidal stability of polystyrene and styrene/AA copolymer latices under simulated reaction conditions. The strength of electrostatic and steric repulsion forces as a function of the electrolyte concentration, pH, and temperature was investigated via coagulation experiments with monomer‐swollen latices in stirred tank reactors. Transmission electron microscopy pictures and dynamic light scattering measurements provided an understanding of the conditions and mechanisms leading to coagulation. The experiments demonstrated that the presence of surface‐bound carboxylic groups only improved the colloidal stability if the carboxylic groups were charged, that is, at a high pH. At a low pH, the copolymer latices were even less stable than the homopolymer latex, and this indicated that the addition of AA did not improve the colloidal stability of a growing polystyrene latex. With respect to emulsion polymerization process operations, insufficient mixing and a highly concentrated electrolyte feed were found to be sources of fouling and enhanced macroscopic coagulation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 726–732, 2005     

Emulsion Polymerization of Acrylic Monomers Stabilized by Poly(Ethylene Oxide)

Abstract

The stability of acrylic latices stabilized by poly(ethylene oxide) (PEO) is governed by the bridging flocculation process during polymerization. The final latex particle size increases with increasing concentration of initiator, PEO, or NaCl. The total scrap formed during the reaction increases rapidly with increasing NaCl concentration due to the ionic strength effect. It is shown that the final latex particle size decreases rapidly with an increase in the agitation speed. The amount of total scrap formed during polymerization is generally greater at a higher agitation speed. These results suggest that the fraction of the particle surface covered by PEO and the ratio of the thickness of the PEO adsorption layer to that of the electric double layer of the latex particles should play an important role in determining the final latex particle size and colloidal stability.     

Preparation and characterization of carboxylic-containing poly(methyl methacrylate) nanolatexes

Poly(methyl methacrylate) (PMMA)-based latex particles bearing carboxylic groups at the surface were prepared via emulsion polymerization. The polymerization recipe and process were optimized in order to target monodisperse particles with diameters around 100 nm. The polymerizations were performed using 4,4-azobis(4-cyanopentanoic) acid (ACPA) as initiator and sodium dodecyl sulphate (SDS) as surfactant. The polymerization conversion was determined by both gas chromatography and gravimetry. The final latexes were characterized with respect to particle size, size distribution, surface charge density, electrokinetic properties (i.e. electrophoretic mobility vs pH and ionic strength) and colloidal stability (i.e. coagulation rate constants vs pH and stability factor vs ionic strength).     

Effects of oligonucleotide adsorption on the physicochemical characteristics of a nanoparticle-based model delivery system for antisense drugs

Cationic polystyrene nanoparticles, as a model drug carrier system for nucleic acids, are capable of binding negatively charged oligonucleotides by multiple electrostatic interactions. The effect of the adsorption of phosphorothioate oligonucleotides on the physicochemical properties of the carrier system was investigated for uncoated and sterically stabilized latex particles. Turbidity measurements and photon-correlation spectroscopy indicate that the colloidal stability of the nanoparticle-oligonucleotide conjugates is influenced by the number of oligonucleotides adsorbed on the carrier. Especially in the case of the uncoated material, a destabilizing effect has been observed up to oligonucleotide concentrations of 2.7 μmol/g polymer. Strikingly, at higher concentrations the latexes exhibit colloidal stability similar to the oligonucleotide-free samples. These results were correlated to zeta-potential measurements demonstrating a reversal from positive to negative values of the zeta potential with increasing oligonucleotide concentration. The points of zero charge of the particles are in the region of maximum coagulation. These findings were compared to adsorption studies and calculations based on the random sequential adsorption model. It appears that at first the colloidal stability of the carrier systems is diminished with increasing oligonucleotide adsorption, while higher surface coverages lead to a significant reduction in coagulation. At the saturation level the surface coverage can be considered as a monolayer of “side-on” adsorbed molecules and the conjugates exhibit colloidal stability similar to the bare particles without adsorbed molecules. Received: 20 April 1998 Accepted: 16 July 1998     

Polymer mediated peptide immobilization onto amino-containing N-isopropylacrylamide-styrene core-shell particles

Monodisperse cationic core-shell latex particles have been prepared using a shot polymerization process, with N-(3-aminopropyl)-methacrylamide-hydrochloride (APMH) as the functional monomer. The final latexes were characterized with respect to final polymerization conversion, water soluble polymer formation, particle size and size distribution, surface charge density and electrokinetic properties. Then the covalent grafting of maleic anhydride-alt-methyl vinyl ether (MAMVE) copolymer onto aminated latex particles was investigated. The most efficient conditions to obtain derivatised particles with no alteration of the colloidal stability were to control both polymer amount/latex particles concentration ratio and the mixing method of the two species. The charge inversion of the hydrolysed MAMVE functionalized particles was demonstrated by measuring the electrophoretic mobility as a function of pH. Finally, the covalent binding approach was implemented with peptide-MAMVE conjugates, confirming the great potential of this promising methodology for the preparation of reactive latex particles bearing peptides.     

Cationic amino-containing N-isopropyl- acrylamide-styrene copolymer particles: 2-surface and colloidal characteristics

 In a previous paper [1], the synthesis of various polystyrene– poly[NIPAM] core–shell latexes bearing cationic amidino and/or amino charges has been described. Several colloidal properties of these cationic latexes have been charac-terized such as: particle size, surface charge density, electrophoretic mobility and finally colloidal stability. Due to the poly[NIPAM]-rich layer in the shell, it was found that temperature played a significant role on all these properties, a LCST around 33 °C being exhibited. In addition, ionic strength was also found to affect the colloidal behavior of these latexes, the largest effect being observed with latexes having both amidino and amino surface charges. The critical coagulation concentra-tions (CCC) of the various latexes above and below the LCST were determined, highlighting the contribution of electrostatic and steric repulsive forces to the stability of these particles. Received: 20 January 1998 Accepted: 8 June 1998     

Electrostatic interactions between amphoteric latex particles and proteins

The electrostatic interactions between amphoteric polymethyl methacrylate latex particles and proteins with different pI values were investigated. These latex particles possess a net positive charge at low pH, but they become negatively charged at high pH. The nature and degree of interactions between these polymer particles and proteins are primarily controlled by the electrostatic characteristics of the particles and proteins under the experimental conditions. The self-promoting adsorption process from the charge neutralization of latex particles by the proteins, which have the opposite net charge to that of the particles, leads to a rapid reduction in the zeta potential of the particles (in other words colloidal stability), and so strong flocculation occurs. On the other hand, the electrostatic repulsion forces between similarly charged latex particles and the proteins retard the adsorption of protein molecules onto the surfaces of the particles. Therefore, latex particles exhibit excellent colloidal stability over a wide range of protein concentrations. A transition from net negative charge to net positive charge, and vice versa (charge reversal), was observed when the particle surface charge density was not high enough to be predominant in the protein adsorption process.     

Peculiarities of the coagulation mechanism of a nanocrystalline cellulose hydrosol and a latex

Dynamic light scattering has been employed to study the coagulation kinetics of colloidal dispersion of nanocrystalline cellulose and SKS-27 ARK synthetic latex under the action of sodium chloride. It has been found that, when a system being coagulated is exposed to a mechanical action, aggregates almost cease to grow at some moment. It has been assumed that the first stage of coagulation is caused by the formation of strong contacts between primary particles and their agglomeration, while the second stage is realized via the interaction of residual hydration layers. It has been shown that, as the density of surfactant adsorption layers on the surface of latex particles is enhanced, the duration of the first stage increases, while the average hydrodynamic particle size decreases.     

Influence of Temperature on Stability of Electrostatically Stabilized Alumina Suspensions

Pure electrostatically stabilized aqueous alumina suspensions were prepared at various solid loadings in order to study the influence of temperature on the surface charge properties and rheology. Surface charge density at various temperatures was measured through potentiometric titration, and the analysis of the potentiometric data was accomplished using the constant capacitance surface model. Calculations of the pair-wise interaction potential between charged colloidal spheres dispersed in water were then carried out using conventional DLVO theory and a software package Stabil45, taking into account the temperature dependence of surface charge density and dielectric constant. The results showed that increasing temperature leads to a gradual diminution of alumina surface ionization, dielectric constant, and a total energy barrier for coagulation. The enhancement of the coagulation rate with increasing temperature leads to a gradual increase of both relative apparent viscosity and thixotropy. Copyright 2000 Academic Press.     

Acetal‐functionalized polymer particles useful for immunoassays. II. Surface and colloidal characterization

Monodisperse polymer colloids with dimethyl and diethyl acetal functionalities were synthesized by a two‐step emulsion polymerization process. The first step consisted of a batch emulsion homopolymerization of styrene (St). The dimethyl and diethyl acetal functionalities were obtained by batch emulsion terpolymerization of St, methacrylic acid (MAA), and methacrylamidoacetaldehyde dimethyl acetal (MAAMA) or methacrylamidoacetaldehyde diethyl acetal (MAADA) in the second step, onto the previously formed polystyrene latex particles. The latexes were characterized by TEM and conductimetric titration, in order to obtain the particle size distribution and the amount of carboxyl and acetal groups on the surface, respectively. The chemical stability of the functionalized surface groups during the storage time was analyzed. The hydrophilic character of the surface of the polymer particles was determined by means of nonionic emulsifier titration. The colloidal stability of the synthesized latexes was studied by measuring the critical coagulation concentration (CCC) against KBr electrolyte, and the existence of a hairy layer on the surface of the latex particles was analyzed by measuring the hydrodynamic particle diameter at several electrolyte concentrations. The surface functionalized groups remained stable for 2 years. The relative hydrophilic character and the colloidal stability were affected by the pH of the medium. On the other hand, the higher the surface charge, the larger the thickness of the hairy layer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 501–511, 1999     

Colloidal stability of dextran-modified latex particles toward adsorption of concanavalin A

The colloidal stability of the dextran-modified poly(methyl methacrylate) (PMMA) latex particles toward adsorption of a carbohydrate-binding protein, concanavalin A (Con A), is primarily controlled by the charge neutralization mechanism. Formation of a crosslinked network structure via the specific affinity interactions between the dimeric Con A molecules and the dextran molecules anchored onto different latex particles may also have an impact on the coagulation kinetics. Judging from the data of coagulation kinetics, the colloidal stability of the latex particles toward added Con A in the decreasing order is: latex particles without dextran modification>latex particles with a dextran content of 2.15%>latex particles with a dex-tran content of 1.24% based on total polymer weight (PMMA+grafted dextran). The coagulation mechanisms involved in the adsorption of Con A onto the latex particles have been proposed to explain these experimental data. Charge neutralization of the negatively charged latex particles by adsorption of the positively charged Con A is the predominant destabilization mechanism. The ratio of the number of dextran active sites to that of Con A molecules plays an important role in the formation of the crosslinked network structure. The electrolytes in water cause a reduction in the electrostatic repulsion force among the interactive latex particles, but this ionic strength effect is not significant in comparison with charge neutralization. Received: 22 October 1997 Accepted: 24 December 1997     

Interaction between an ion-penetrable particle and a solid particle. II. Criteria for heterocoagulation

The potential energy of the total interaction between two spherical colloidal particles of different nature is calculated, i. e., of an ion-penetrable particle and an ion-impenetrable solid particle having a constant surface potential or constant surface charge density. The criteria for heterocoagulation are derived. The obtained results suggest a possibility of selective coagulation in the mixed system.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.