Formation and study of mixed copper sulfide-copper telluride layers on the surface of polyamide 6

The layers of mixed copper chalcogenides, Cu_xS-Cu_yTe, were formed on the surface of polyamide using solutions of potassium and sodium telluropentathionates, K₂TeS₄O₆ and Na₂TeS₄O₆, respectively, and of telluropentathionic acid, H₂TeS₄O₆, as precursors of chalcogens. The concentration of sorbed chalcogens increased with the increasing time of the treatment, concentration and temperature of precursor solution. Cu_xS-Cu_yTe layers are formed on the surface of polyamide after the treatment of chalcogenized polymer with Cu(II/I) salt solution. The concentration of copper in the layer increases with the increase of chalcogenization duration, concentration and the temperature of chalcogenization solution. In the surface of Cu_xS-Cu_yTe layers various copper, sulfur, tellurium and oxygen compounds (Cu₂S, CuS, S₈, Cu_xS, Cu_yTe, Cu(OH)₂ and TeO₂) were present. Chalcogenides were the major components in the layer. Chalcogenide phases — digenite, Cu_1.8S, djurleite, Cu_1.9375S, anilite, Cu₇S₄, geerite, CuS₂, chalcocite, Cu₂S, tetragonal Cu_3.18Te₂, Cu_2.72Te, hexagonal Cu₂Te, Cu₄Te₃, Cu_1.80Te, Cu_1.85Te₂, and orthorhombic vulcanite, CuTe were identified in the layers by X-ray diffraction. Electrical sheet resistance of Cu_xS-Cu_yTe layers vary from ∼ 1.0 kW cm⁻² to 4×10³ kΩ cm⁻². It is concluded that the formation of chalcogenide layers proceeds in the form of islands which grow into larger agglomerates. Use of the gathered data enables design and formation of the Cu_xS-Cu_yTe layers with desired conductivities.      

Comparison characterization of copper selenide thin layers prepared on polyamide 6 films by sorption-diffusion method

Some earlier synthesized copper selenide (Cu _x Se) layers formed on the surface of polyamide 6 by sorption-diffusion method using potassium selenotrithionate (K₂SeS₂O₆) as precursor of selenium were characterized by the XRD, XPS and SEM methods. According to the results of the SEM studies, the most uniform Cu _x Se layers form at the 2.5 h polyamide seleniumized duration at the temperature of 60°C. The thickness of layers, which dependeds on the duration of seleniumization, changed in the range of 0.8–3.2 µm. The XRD patterns of not previously studied Cu _x Se layers showed their phase composition of six copper selenides: Cu₂Se, two phases of CuSe₂, Cu₃Se₂, berzellianite, Cu_2-x Se, and bellidoite Cu₂Se. Analysis of the XRD and XPS data shows that the macrostructure and composition of the Cu_xSe layers depend on the conditions of formation of these layers.      

Formation and characterization of Cu<Subscript>x</Subscript>S layers on polyethylene film using the solutions of sulfur in carbon disulfide

Results of the formation of copper sulfide layers using the solutions of elemental sulfur in carbon disulfide as precursor for sulfurization are presented. Low density polyethylene film can be effectively sulfurized in the solutions of rhombic (α) sulfur in carbon disulfide. The concentration of sulfur in polyethylene increases with the increase of the temperature and concentration of sulfur solution in carbon disulfide and it little depends on the duration of sulfurization. Electrically conductive copper sulfide layers on polyethylene film were formed when sulfurized polyethylene was treated with the solution of copper (II/I) salts. Cu_xS layer with the lowest sheet resistance (11.2 Ω cm⁻²) was formed when sulfurized polyethylene was treated with copper salts solution at 80°C. All samples with formed Cu_xS layers were characterized by X-ray photoelectron spectroscopy. XPS analysis of obtained layers showed that on the layer’s surface and in the etched surface various compounds of copper, sulfur and oxygen are present: Cu₂S, CuS, CuO, S₈, CuSO₄, Cu(OH)₂ and water. The biggest amounts of CuSO₄ and Cu(OH)₂ are present on the layer’s surface. Significantly more copper sulfides are found in the etched layers.     

Ceramic materials made of CdTe and Cd-Zn-Te nanocrystalline powders

In the present study newly produced semiconductor ceramic nanopowder materials made of CdTe and Cd_1−xZn_xTe (CZT) are considered. Common features and differences in microstructures, phase transformations, grain growth and properties of the ceramic materials of the binary and ternary compositions are studied.      

Formation and properties of copper chalcogenides thin films on polymers formed using sodium telluropentathionate

The preparative conditions were optimized to get chalcogens layers on the polymer — polyamide PA surface by sorption at room temperature using sodium telluropentathionate, Na₂TeS₄O₆. Further interaction of chalcogenized dielectric with copper’s (I/II) salt solution leads to the formation of mixed Cu_xS_y-Cu_xTe_y layers. Optical, electrical and surface characteristics of the layers are highly controlled by the deposition parameters. The stoichiometry of these layers was established by UV-Visible and AA spectrometry. Optical absorption (transmittance) experiments show the samples are of high optical quality. The band gaps of thin films were obtained from their optical absorption spectra, which were found in the range of 1.44–2.97 eV. XRD was used in combination with AFM to characterize chalcogenides layers’ structural features. XRD analysis confirmed the formation of mixed copper chalcogenides’ layers in the surface of PA with binary phases such as Cu₂Te, Cu_3.18Te₂, copper telluride, Cu_2.72Te₂, vulcanite, CuTe, anilite, Cu₇S₄ and copper sulfide, Cu_1.8S. The crystallite sizes of thin films calculated by the Scherer formula were found to be in the range of 3.07–13.53 nm for Cu_xS_y crystallites and 4.06–20.79 nm for Cu_xTe_y crystallites. At room temperature an electrical resistance of Cu_xS_y-Cu_xTe_y layers varies from 3.0×10³ kΩ□^?1 to 1.0 kΩ□^?1.      

Removal of cadmium and copper ions by <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> R57 cells immobilized onto polyvinyl alcohol/tetraethoxysilane hybrid matrices

Polyvinyl alcohol (PVA) and tetraethoxysilane (TEOS) hybrid materials were prepared by sol-gel methods and tested as matrices for immobilization of Trichosporon cutaneum R57, capable of removing cadmium and copper ions from aqueous solutions. A kinetic model was applied and the effects of matrix TEOS content on the copper and cadmium uptake equilibria and rate constants were investigated.      

Synthesis by self-assembly and structural characterization of a new co-crystal system {[Cu(NO3)2(H2O)2]L1(NO3)2} (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) from copper nitrate and a carbene precursor

Herein, the first example of a co-crystal system formed by an imidazolium nitrate, a carbene precursor, and copper (II) nitrate, {[Cu(NO₃)₂(H₂O)₂]L1(NO₃)₂} (1) (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) is reported. These two building blocks are connected in the solid state through hydrogen bonds to generate a three-dimensional supramolecular network.      

Synthesis of lead-based 1212 and 3212 superconductors by an aqueous sol-gel method

The aqueous sol-gel synthesis technique for the preparation of (Pb,Sr)Sr₂(Y,Ca)Cu₂O_7±x (Pb-1212) and (Pb₂,Cu)Sr₂(Y,Ca)Cu₂O_8±x (Pb-3212) superconductors using two different complexing agents, namely 1,2-ethanediol and tartaric acid was studied. The phase transformations, composition and micro-structural features in the polycrystalline samples were studied by powder X-ray diffraction analysis (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). XRD analysis of the ceramic samples obtained by calcination of Pb-Sr-Y-Ca-Cu-O acetate-glycolate precursor gels in air, for 10 hours at 800°C and at 825°C, showed the presence of homogeneous Pb-1212 and Pb-3212 crystallites as major phases. The XRD patterns of the ceramics obtained from Pb-Sr-Y-Ca-Cu-O acetate-tartrate precursor gels, however, showed multiphasic character. The critical temperature of superconductivity (T_C (onset)) observed by resistivity measurements were found to be 91 K and 75 K for Pb-1212 and Pb-3212 samples, respectively.      

Theoretical determination of the favorable mechanism of the reaction between AlX and HX (X = Br, Cl, and F)

The reaction mechanism between AlX and HX (X = Br, Cl, and F) have been characterized in detail using DFT as well as the ab initio method. The reaction yielding AlX₃ and molecular hydrogen was calculated to be highly exothermic. The present calculations also show that the possible routes to the trihalides species start more favorable with the primary insertion product AlX₂H than with the biadduct AlX(HX)₂ one.      

Synthesis and characterization of new copper(II) complex compounds with chlorhexidine. Part I

Three new copper(II) complex compounds with chlorhexidine diacetate as a ligand have been prepared and characterized by elemental and thermogravimetrical analyses, molar conductances, magnetic susceptibility measurements, infrared, electronic and EPR spectra. The complexes correspond to the formulas: [Cu₂(CHX)Cl₄]·2C₂H₅OH, [Cu₂(CHX)Br₄]·2C₂H₅OH and [Cu₂(CHX)(CH₃COO)₂] (CH₃COO)₂·2C₂H₅OH, where CHX = chlorhexidine, their composition and stereochemistry depending on the reaction conditions and the metal salt used. Chlorhexidine acts as neutral tetradentate NNNN donor, coordinating through the four imine nitrogen atoms. Investigations on antimicrobial activity in vitro show that all the complexes are active against the tested microorganisms, the complex with chloride being more active against Gram negative bacteria than chlorhexidine diacetate..      

The effects of copper ions on the catalytical degradation of azo dye acid chrome blue K

The effects of Cu²⁺ on the catalytical degradation of acid chrome blue K (ACBK) in UV-TiO₂ and H₂O₂ processes were studied. In these two processes, Cu²⁺ markedly depressed the catalytical degradation of ACBK by its interaction with ACBK. Through this interaction, the new complex Cu(ACBK)₂ formed. The formation of this new complex was favorable to protect some groups in ACBK from the oxidation of reactive oxygen generated in UV-TiO₂ and H₂O₂ processes, and consequently had suppressing effects on degradation of ACBK. In addition, Cu²⁺ also inhibited the degradation of ACBK in UV-TiO₂ process by influencing the adsorption of ACBK on the surface of TiO₂ particles.      

<Emphasis Type="Italic">N</Emphasis>-Alkylation of benzimidazoles with ketonic Mannich bases and the reduction of the resulting 1-(3-oxopropyl)benzimidazoles

Benzimidazole, benzimidazoles diversely substituted at position 2, and 5,6-dimethylbenzimidazole have been alkylated at N ¹ with ketonic Mannich bases derived from acetophenones, acetylnaphthalenes, 2-acetylthiophene and 1-tetralone to afford a series of novel 1-(3-oxopropyl)benzimidazoles. The reduction of these transamination products with NaBH₄ in methanol produced the corresponding 1-(3-hydroxypropyl)benzimidazoles in excellent yields.      

Copper(II) complexes of the antihypertensive drug nadolol

The complexation of the non-selective β-blocker nadolol, HL, 1 with copper(II) leads to formation of mono-and dinuclear complexes depending mainly on the metal-to-ligand molar ratio. The mononuclear violet complex CuL₂·2Solv, 2, was obtained in a soluble form at metal-to-ligand molar ratio Cu(II): HL ≤ 1: 10 in methanolic or slightly alkaline aqueous solutions. The dinuclear green complex Cu₂L₂Cl₂·H₂O, 3 was synthesized at Cu(II): HL ≥ 1: 2 molar ratio in methanolic solutions. The complexes were studied using spectral (UV-Vis, FT-IR, EPR), magnetochemical, thermogravimetric methods and elemental analysis. In the complexes nadolol acts as a monoanionic bidentate ligand coordinated to copper(II) through the NH-and the deprotonated OH-groups of its aminoalcohol fragment.      

The binary system PbO - BiVO4

Phase equilibria established in the PbO - BiVO₄ system over the whole component concentration range up to 1000°C have been investigated. A phase diagram has been constructed using DTA and XRD.      

Synthesis, structures, and spectroscopic properties of copper(I) complexes bearing 7-acetamido-4-methyl-1,8-naphthyridin-2-carbaldehyde azine and 1,2-bis(diphenylphosphino)ethane ligands

A new ligand napaa (napaa = 7-acetamido-4-methyl-1,8-naphthyridin-2-carbaldehyde azine) and its two dinuclear copper(I) complexes, Cu₂(napaa)(dppe)₂(ClO₄)₂ (1) and Cu₂(napaa)(PPh₃)₄(BF₄)₂ (2) (dppe = 1,2-bis(diphenylphosphino)ethane) and PPh₃ = triphenylphosphine) were synthesized and characterized, and the structure of 1 was determined by X-ray crystal analysis. Each copper atom in 1 has a distorted tetrahedral geometry in which the metal center is associated to napaa and dppe ligands displaying chelating coordination modes and the naphthyridine rings of napaa are almost coplanar. The two complexes exhibit similar electronic absorption spectra with λ_max at about 366 nm, which can be tentatively assigned to metal-to-ligand charge-transfer (MLCT) transition. The assignment was further supported by density functional theory (DFT) calculations.      

The effect of substituents of immobilized Rh complexes on the asymmetric hydrogenation of acetophenone derivatives

Using a modified Augustine’s method variously substituted Rh complexes were anchored on Al₂O₃ support. The prepared catalysts were characterized by spectroscopic methods and were applied in the hydrogenation of several acetophenone derivatives (p-CF₃-acetophenone, acetophenone, p-NH₂-acetophenone). Enantioselective C=O hydrogenations were observed with reasonable activity and selectivity on all heterogenized complexes, e.e. up to 80%. At the same time the immobilized samples showed the advantages of the heterogeneous systems: easy handling and recyclability.      

Removal of uranyl ions from UO2(NO3)2 solution by means of Chlorella vulgaris and Dunaliella salina algae

This paper deals with a study of the biosorption of UO₂ ²⁺ ions on two green algae: Chlorella vulgaris and Dunaliella salina. By investigating the retention degree versus contact time from Langmuir and Freundlich biosorption isotherms, kinetic investigations and FTIR spectra it was found that the biosorption process was greater for Chlorella vulgaris than for Dunaliella salina. A new kinetics method is proposed to establish the reaction order concerning the biosorption process of uranyl ions on these biomasses.      

Ionic liquid promoted synthesis of bis(indolyl) methanes

1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][HSO₄] was found to be an effective catalyst for the condensation reaction of indoles and derivatives with benzaldehydes in microwave irradiation with lower reaction time and higher yields to give bis(indolyl) methanes.      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.