Sb-mediated growth of high-density InAs quantum dots and GaAsSb embedding growth by MBE

Self-assembled InAs quantum dots (QDs) with high-density were grown on GaAs(0 0 1) substrates by antimony (Sb)-mediated molecular beam epitaxy technique using GaAsSb/GaAs buffer layer and InAsSb wetting layer (WL). In this Sb-mediated growth, many two-dimensional (2D) small islands were formed on those WL surfaces. These 2D islands provide high step density and suppress surface migration. As the results, high-density InAs QDs were achieved, and photoluminescence (PL) intensity increased. Furthermore, by introducing GaAsSb capping layer (CL), higher PL intensity at room temperature was obtained as compared with that InGaAs CL.     

Properties of Strain Compensated Symmetrical Triangular Quantum Wells Composed of InGaAs/InAs Chirped Superlattice Grown Using Gas Source Molecular Beam Epitaxy

We investigate the properties of symmetrical triangular quantum wells composed of InGaAs/InAs chirped superlattice, which is grown by gas source molecular beam epitaxy via digital alloy method. In the quantum well structure tensile AlInGaAs are used as barriers to partially compensate for the significant compressive strain in the wells, the strain compensation effects are confirmed by x-ray measurement. The photoluminescence spectra of the sample are dominated by the excitonic recombination peak in the whole temperature range. The thermal quenching, peak energy shift and line-width broadening of the PL spectra are analysed in detail, the mechanisms are discussed.     

GaAs Based InAs/GaSb Superlattice Short Wavelength Infrared Detectors Grown by Molecular Beam Epitaxy

InAs/GaSb superlattice （SL） short wavelength infrared photoconduction detectors are grown by molecular beam epitaxy on GaAs（O01） semi-insulating substrates. An interfacal misfit mode AISb quantum dot layer and a thick GaSb layer are grown as buffer layers. The detectors containing a 200-period 2 ML/S ML InAs/GaSb SL active layer are fabricated with a pixel area of 800×800 μm^2 without using passivation or antirefleetion coatings. Corresponding to the 50% cutoff wavelengths of 2.05μm at 77K and 2.25 μm at 300 K, the peak detectivities of the detectors are 4 × 10^9 cm·Hz^1/2/W at 77K and 2 × 10^8 cm·Hz1/2/W at 300K, respectively.     

Interfaces in InAs/GaSb Superlattices Grown by Molecular Beam Epitaxy

Short period InAs（4ML）/GaSb（SML） superlattices （SLs） with InSb- and mixed-like （or Ga1-xInxAs1-ySby- like） interfaces （IFs） are grown by molecular-beam epitaxy （MBE） on （001） GaSh substrates at optimized growth temperature. Raman scattering reveals that two kinds of IFs can be formed by controlling shutter sequences. X-ray diffraction （XRD） and atomic force microscopy （AFM） demonstrate that SLs with mixed-like IFs are more sensitive to growth temperature than that with InSb-like IFs. The photoluminescence （PL） spectra of SLs with mixed-like IFs show a stronger intensity and narrower line width than with InSb-like IFs. It is concluded that InAs/GaSb SLs with mixed-like IFs have better crystalline and optical properties.     

Molecular Beam Epitaxy of GaSb on GaAs Substrates with AlSb Buffer Layers

We investigate the molecular beam epitaxy growth of GaSb films on GaAs substrates using AlSb buffer layers. Optimization of AlSb growth parameter is aimed at obtaining high GaSh crystal quality and smooth GaSh surface. The optimized growth temperature and thickness of AlSb layers are found to be 450℃ and 2.1 nm, respectively. A rms surface roughness of 0.67 nm over 10 × 10 μm^2 is achieved as a 0.5 μm GaSh film is grown under optimized conditions.     

High Quality AlN with a Thin Interlayer Grown on a Sapphire Substrate by Plasma-Assisted Molecular Beam Epitaxy

We report an AlN epi-layer grown on sapphire by plasma-assisted molecular beam epitaxy with a thin interlayer structure. The effects of growth mode on threading dislocations (TDs) and surface morphology are studied. Then an interlayer structure grown under a V/Ⅲ ratio of 1 is adopted to improve the AlN crystalline quality. By optimizing the thickness of the interlayer, the TD density and surface roughness can be reduced simultaneously.     

Growth, Antimony Incorporation Behaviour and Beryllium Doping of GaAs1-ySby Grown on GaAs by Molecular Beam Epitaxy

A series of GaAs1-ySby epilayers are grown on GaAs substrates under antimony compositions of samples with beryllium doping are obtained different growth conditions. Different A non-equilibrium thermodynamics model is used to calibrate and fit the Sb composition. Activation energy of 0.37 eV for the dissociation process of Sb4 molecules is obtained. Carrier mobility and concentration of samples are influenced by the Sb composition. Quasi-qualitative analysis of mobility is used to explain the relations among Sb composition, carrier mobility and concentration. High resolution x-ray diffraction （HRXRD） rocking curves and Hall effects measurements are used to determine the crystal quality, carrier mobility and concentration.     

Effect of GaAs/GaSb Combination Strain-Reducing Layer on Self-Assembled InAs Quantum Dots

Self-assembled quantum dots capping with a GaAs/Gasb combined strain-reduced layer （CSRL） are grown by MBE. Their structural and optical properties are investigated by AFM and photoluminescence （PL）. PL measurements have shown that stronger emission about 1.3μm can be obtained by Sb irradiation and capping QDs with 3 ML GaAs/2 ML GaSh CSRL at room temperature. The full width at half maximum （FWHM） of the PL spectrum is about 20.2 meV （19.9 meV） at room temperature （2OK）, indicating that the QDs have high uniform, The result of FWHM is much better than the recently reported result, which is due to the fact that lower QD growth rate and growth interruption after the QDs deposition are adopted in our experiments.     

GaAs-Based Metamorphic Long-Wavelength InAs Quantum Dots Grown by Molecular Beam Epitaxy

A bilayer stacked InAs/GaAs quantum dot structure grown by molecular beam epitaxy on an In0.05Ga0.95As metamorphic buffer is investigated. By introducing a InGaAs：Sb cover layer on the upper InAs quantum dots （QDs） layers, the emission wavelength of the QDs is extended successfully to 1.533 μm at room temperature, and the density of the QDs is in the range of 4× 10^9-8 ×10^9cm^-2. Strong photoluminescence （PL） intensity with a full width at half maximum of 28.6meV of the PL spectrum shows good optical quality of the bilayer QDs. The growth of bilayer QDs on metamorphic buffers offers a useful way to extend the wavelengths of GaAs-based materials for potential applications in optoeleetronic and quantum functional devices.     

Growth of highly disordered InGaP on (100) GaAs by molecular beam epitaxy with a GaP decomposition source

High-quality, lattice-matched InGaP on exact (100) GaAs was successfully grown by molecular beam epitaxy with a GaP decomposition source. The ordering parameter (η) of the InGaP is investigated as a function of the growth temperature. η is as low as 0.22 and almost insensitive to the growth temperature below 460 °C. It increases abruptly around 475 °C and has a maximum value of 0.35 at ≈490 °C. Double crystal X-ray diffraction and a low-temperature photoluminescence spectrum reveal that the present growth method is robust and provides better quality InGaP compared to other state-of-the-art growth technologies. Received: 20 November 2000 / Accepted: 27 January 2001 / Published online: 21 March 2001     

Ordered InAs Quantum Dots with Controllable Periods Grown on Stripe-Patterned GaAs Substrates

GaAs （001） substrates are patterned by electron beam lithography and wet chemical etching to control the nucleation of lnAs quantum dots （QDs）. InAs dots are grown on the stripe-patterned substrates by solid source molecular beam epitaxy. A thick buffer layer is deposited on the strip pattern before the deposition of InAs. To enhance the surface diffusion length of the In atoms, InAs is deposited with low growth rate and low As pressure. The AFM images show that distinct one-dimensionally ordered InAs QDs with homogeneous size distribution are created, and the QDs preferentiMly nucleate along the trench. With the increasing amount of deposited InAs and the spacing of the trenches, a number of QDs are formed beside the trenches. The distribution of additional QDs is long-range ordered, always along the trenchs rather than across the spacing regions.     

Low Density Self-Assembled InAs/GaAs Quantum Dots Grown by Metal Organic Chemical Vapour Deposition

The self-assembled InAs quantum dots （QDs） on GaAs substrates with low density （5×10^8 cm^-2） are achieved using relatively higher growth temperature and low InAs coverage by low-pressure metal-organic chemical vapour deposition. The macro-PL spectra exhibit three emission peaks at 1361, 1280 and 1204nm, corresponding to the ground level （GS）, the first excited state （ES1） and the second excited state （ES2） of the QDs, respectively, which are obtained when the GaAs capping layer is grown using triethylgallium and tertiallybutylarsine. As a result of micro-PL, only a few peaks from individual dots have been observed. The exciton-biexciton behaviour was clearly observed at low temperature.     

Structural and Photoluminescence Properties for Highly Strain-Compensated InGaAs/InAlAs Superlattice

The effects of strain compensation are investigated by using twenty periods of highly strain-compensated InGaAs/InAlAs superlattice. The lattice mismatches of individual layers are as high as about 1%, and the thicknesses are close to critical thicknesses. X-ray diffraction measurements show that lattice imperfectness is not serious but still present, though the structural parameters are within the range of theoretical design criteria for structural stability. Rough interfaces and composition fluctuations are the primary causes for lattice imperfectness. Photoluminescence measurements show the large thermally activated nonradiative recombination in the sample. In addition, the recombination process gradually evolves from excitonic recombination at lower temperatures to band-to-band recombination at higher temperatures, which should be considered in device applications.     

Effect of Ⅲ/Ⅴ Ratio of HT-AIN Buffer Layer on Polarity Selection and Electrical Quality of GaN Films Grown by Radio Frequency Molecular Beam Epitaxy

We investigate the effect of A/N ratio of the high temperature （HT） AIN buffer layer on polarity selection and electrical quality of GaN films grown by radio frequency molecular beam epitaxy. The results show that low Al/N ratio results in N-polarity GaN films and intermediate Al/N ratio leads to mixed-polarity GaN films with poor electrical quality. GaN films tend to grow with Ga polarity on Al-rich AIN buffer layers. GaN films with different polarities are confirmed by in-situ reflection high-energy electron diffraction during the growth process. Wet chemical etching, together with atomic force microscopy, also proves the polarity assignments. The optimum value for room-temperature Hall mobility of the Ga-polarity GaN film is 703cm^2/V.s, which is superior to the N-polarity and mixed-polarity GaN films.     

Reversible Carriers Tunnelling in Asymmetric Coupled InGaN/GaN Quantum Wells

Temperature-dependent photoluminescence （PL） and time resolved photoluminescence （TRPL） are performed to study the PL characteristics and carrier transfer mechanism in asymmetric coupled InGaN/GaN multiple quantum wells （AS-QWs）. Our results reveal that abnormal carrier tunnelling from the wide quantum well （WQW） to the narrow quantum well （NQW） is observed at temperature higher than about lOOK, while a normal carrier tunnelling from the NQW to the WQW is observed at temperature lower than 100 K. The reversible carrier tunnelling between the two Q Ws makes it possible to explore new types of temperature sensitive emission devices. It is shown that PL internal quantum efficiency （IQE） of the NQW is enhanced to about 46% due to the assistant of the abnormal carrier tunnelling.     

InGaP/GaAs heterojunction bipolar transistor grown by solid-source molecular beam epitaxy with a GaP decomposition source

Lattice-matched InGaP epilayers on GaAs (001) and InGaP/GaAs heterojunction bipolar transistors (HBTs) were successfully grown by solid-source molecular beam epitaxy (SSMBE) with a GaP decomposition source. A 3 μm thick InGaP epilayer shows that low temperature photoluminescence (PL) peak energy is as large as 1.998 eV, full width at half maximum (FWHM) is 5.26 meV, which is the smallest ever reported, and X-ray diffraction (XRD) rocking curve linewidth is as narrow as that of GaAs substrate. The electron mobilities at room temperature of nominally undoped InGaP layers obtained by Hall measurements are comparable to similar InGaP epilayer grown by solid-source molecular beam epitaxy (SSMBE) with other sources or other growth techniques. The large area InGaP/GaAs HBTs show very good Dc characteristics.     

Nonmean-Field Model for Ostwald Ripening of Two-Dimensional Islands

A nonmean-field model for the ripening of two-dimensional islands is presented. In this model, the adatom sea is divided into many small cells that are the polygons of a Voronoi network. The chemical potentials of adatom seas surrounding different islands are different. Strain generated by lattice mismatch is introduced into the model.Computer simulation under periodic boundary conditions is carried out to describe the island ripening in two cases (with and without strain), and demonstrates that small islands may grow faster than large islands, which cannot occur in the mean-field model. The simulated results also show that including strain will slow down the evolution of average island size, and an explanation for this is given.     

Giant optical anisotropy in R-plane GaN/AlGaN quantum wells caused by valence band mixing effect

This study investigates the optical anisotropy spectrum in the R-plane (i.e., the -oriented layer plane) of GaN/Al_0.2Ga_0.8N quantum wells of different widths. The optical matrix elements in the wurtzite quantum wells are calculated using the k⋅p finite difference scheme. The calculations show that the valence band mixing effect produces giant in-plane optical anisotropy in -oriented GaN/Al_0.2Ga_0.8N quantum wells with a narrow width. The nature of the in-plane optical anisotropy is found to be dependent on the well width. Specifically, it is found that the anisotropy changes from x^′-polarization to y^′-polarization as the well width increases.     

Effect of Interface Roughness and Dislocation Density on Electroluminescence Intensity of InGaN Multiple Quantum Wells

Effects of interface roughness and dislocation density on the electroluminescence (EL) intensity of InGaN multiple quantum wells (MQWs) are investigated. It is found that the EL intensity increases with the number of satellite peaks in the x-ray diffraction experiments of InGaN MQW samples. It is indicated that the rough interface will lead the reduction of EL intensity of InGaN MQW samples. It is also found that the EL intensity increases with the decrease of dislocation density which is characterized by the x-ray diffraction measurements. It is suggested that the EL intensity of InGaN MQWs can be improved by decreasing the interface roughness and dislocation density.     

Quantum Anomalous Hall Multilayers Grown by Molecular Beam Epitaxy

Quantum anomalous Hall(QAH) effect is a quantum Hall effect that occurs without the need of external magnetic field. A system composed of multiple parallel QAH layers is an effective high Chern number QAH insulator and the key to the applications of the dissipationless chiral edge channels in low energy consumption electronics. Such a QAH multilayer can also be engineered into other exotic topological phases such as a magnetic Weyl semimetal with only one pair of Weyl points. This work reports the first experimental realization of QAH multilayers in the superlattices composed of magnetically doped(Bi,Sb)_2Te_3 topological insulator and Cd Se normal insulator layers grown by molecular beam epitaxy. The obtained multilayer samples show quantized Hall resistance h/N_e~2, where h is Planck's constant, e is the elementary charge and N is the number of the magnetic topological insulator layers, resembling a high Chern number QAH insulator. The QAH multilayers provide an excellent platform to study various topological states of matter.