A new coding scheme of QC-LDPC codes for optical transmission systems

Based on Galois Field (GF(q)) multiplicative group, a new coding scheme for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes is proposed, and the new coding scheme has some advantages such as the simpler construction, the easier implementation encoding, the lower complexity of the encoding and decoding, the more flexible adjustment of the code length as well as the code rate and so forth. Under the condition of considering the characteristics of optical transmission systems, an irregular QC-LDPC (3843,3603) code to be suitable for optical transmission systems is constructed by applying the proposed new coding scheme. The simulation result shows that the net coding gain (NCG) of the irregular QC-LDPC (3843,3603) code is respectively improved 2.14 dB, 1.19 dB, 0.24 dB and 0.14 dB more than those of the classic RS (255,239) code in ITU-T G.975, the LDPC (32640,30592) code in ITU-T G.975.1, the regular SCG-LDPC (3969,3720) code constructed by the Systematically Constructed Gallager (SCG) coding scheme and the regular QC-LDPC (4221,3956) code at the bit error rate (BER) of 10-8. Furthermore, all the five codes have the same code rate of 93.7%. Therefore, the irregular QC-LDPC (3843,3603) code constructed by the proposed new coding scheme has the more excellent error-correction performance and can be better suitable for optical transmission systems.     

Single-mode fused coupler for undersea optical transmission systems

A single mode 3 dB fused coupler, to be used as a redundant laser combiner in the submerged repeater of an undersea optical fibre transmission system, is described. The fabrication and package design of the component for this high reliability application is discussed, and the results of a wide range of environmental tests are given.     

A secure transmission scheme on link level for optical fiber communication systems

In secure communication systems, a very important problem is how to prevent wiretapping. Lots of researches on cryptography give good solutions on secure communications. But if a wire tapper can detect the existence of the transmitted information and get enough eavesdropped frames, cryptanalysis techniques can help to blindly recover the frame structures, error-control coding parameters and passwords. In this paper we propose a novel secure transmission scheme on the link level for optical fiber communication systems. Based on the blind frame synchronization technique, we propose to drop the traditionally strict frame structures in fiber communications and conceal the error-correcting-encoded blocks among random data, so that wire tappers cannot get enough coded packets to analyze and recover the transmitted information. Therefore, the proposed method is very suitable for secure communications and military communications.     

Temporal filtering using time lenses for optical transmission systems

An optical signal processing scheme using time lenses in a 4-f configuration for optical communication systems is proposed. The first time-lens combined with a dispersive element such as an optical fiber produces the Fourier transform of the input signal and the second time lens combined with an optical fiber placed after the temporal filter produces the inverse Fourier transformation. Typically, in an optical signal processing scheme based on space/time-lens, the signal at the output is space/time-reversed because of the direct Fourier transformation after the spatial/temporal filter, which is undesirable for a practical optical communication system. Here, we propose a technique to implement both direct and inverse Fourier transformation using time lenses which has no spatial analogue. As a result, the bit sequence at the output is not time-reversed. Two applications of the proposed scheme, a demultiplexer for wavelength division multiplexing (WDM) systems and a higher-order dispersion compensator, have been discussed and numerically implemented.     

Improved planar optical branching elements for multimode fibre transmission systems

The optical tapping and fan-out elements which we had previously fabricated for multimode fibre transmission systems all suffered from the serious drawback that the aging of the light-sensitive foil used in our simple planar technology resulted in a deterioration in the performance of structures using such foil as a planar waveguide. This paper introduces improved optical structures in which this drawback has been avoided while stil retaining the simple technique by which high fibre positioning accuracy is assured. In addition the overall insertion loss of the structures has been reduced to about 2 dB for the fan-out structure and 1.2 dB–1.5 dB for the access coupler.     

大口径超长焦距紧凑型光学系统设计

为满足空间遥感光学系统结构紧凑、体积小以及高分辨率的需求,提出了一种长焦距紧凑型光学系统的设计方法。基于高斯光学和初级像差理论,创建了同轴四反射镜系统的初始结构,通过视场偏置的方法避免二次遮拦。对设计的大口径超长焦距同轴偏视场四反射光学系统进行优化,系统口径1 800 mm,有效焦距25 000 mm,全视场角1°×0.1°。设计结果表明,系统设计波像差优于λ/50(λ=632.8 nm),全视场相对畸变小于0.4%,光学筒长仅为有效焦距的1/10,结构简单紧凑,像质接近衍射极限,对大口径超长焦距空间遥感光学系统的设计具有一定的借鉴作用。     

A novel construction algorithm of the LDPC code for high-speed long-haul optical transmission systems

According to the transmission characteristics of high-speed long-haul optical transmission system, the main construction method of Low-Density Parity-Check (LDPC) code for optical transmission system is presented and a novel construction algorithm of LDPC code is proposed, the theoretical analysis shows that the parity check matrix of the LDPC code constructed by the proposed construction algorithm has no four-girth phenomenon, this is also theoretically proved out. Both the novel LDPC(3969,3720) code with 6.69% redundancy and the novel LDPC(8281,7920) code with 4.56% redundancy for optical transmission systems are constructed by using the presented construction method and proposed construction algorithm. The simulation results show that the net coding gain (NCG) of the two novel LDPC codes at the eighteenth iteration for the BER of 10^?12 are respectively 1.63 dB and 1.49 dB more than that of the RS(255,239) code in ITU-T G.975. Moreover, the decoding of the LDPC code in the hardware can parallel be implemented, so the decoding speed of the two novel LDPC codes are very rapid, the complexities of implementing the two novel LDPC codes, compared with the concatenated codes in ITU-T G.975.1, are relatively lower, furthermore, the hardware overhead and storage space can relatively be saved and the computation complexity can be reduced in implementing the hardware in the future. As a result, the two novel LDPC codes can better be suitable for high-speed long-haul optical transmission systems.     

Optimal span length in high-speed transmission systems with hybrid Raman-erbium-doped fiber amplification

We show, using nonlinearity management, that the optimal performance in high-bit-rate dispersion-managed fiber systems with hybrid amplification is achieved for a specific amplifier spacing that is different from the asymptotically vanishing length corresponding to ideally distributed amplification [Opt. Lett. 15, 1064 (1990)]. In particular, we prove the existence of a nontrivial optimal span length for 40-Gbit/s wavelength-division transmission systems with Raman-erbium-doped fiber amplification. Optimal amplifier lengths are obtained for several dispersion maps based on commonly used transmission fibers.     

Phase jitter in periodically dispersion-managed optical transmission systems

We investigate the phase jitter in long-haul optical transmission systems with periodic dispersion management and amplification. We compare different dispersion-managed soliton systems and a conventional soliton system having the same pulse width and path-averaged dispersion. Using the variational method, we derive the ordinary differential equations for the pulse parameters perturbed by amplifier noise and hence calculate the phase jitter. We verify the analytical results by numerically solving the nonlinear Schrödinger equation using split-step Fourier algorithm. The results suggest that the reduction of nonlinear phase noise in dispersion-managed soliton systems is possible compared to a conventional soliton system. It is also revealed that the phase noise is enhanced in stronger dispersion-managed systems. We also explore the phase noise effect in dispersion-managed quasi-linear systems and find that phase jitter is mitigated in highly dispersive fibers.     

A broadband ultra flattened chromatic dispersion microstructured fiber for optical communications

A double-cladding microstructured fiber (MF) is proposed in this paper. The inner cladding of this optical fiber is composed of elliptical air holes and silica. The dependence of dispersion on the diameter of the air holes, the pitch, and the axes of the elliptical holes is investigated numerically. The proposed fiber possesses an ultra flattened dispersion curve over a wide wavelength range, and its dispersion value is small. The effective mode area is approaching to 60 μm², and the confinement loss is as low as <0.025 dB/km at 1550 nm. While choosing suitable structure parameters, an ultra dispersion-flattened MF within a broadband from1000 nm to 1900 nm can be achieved. The dispersion fluctuation is 0.6-1.0 ps/(nm·km) in all S, C and L band.     

四波混频在长距离相干光纤传输中的影响

本文研究光纤非线性现象之一的四波混频对长距离相干多路光纤传输系统的影响.通过对一条长度为550km,采用9个掺铒光纤放大器的频分复用系统的实验,清楚地观察到了四波混频这一光纤非线性.实验的结果符合对四波混频的理论分析与计算.结果表明:对信息容量在每秒10~9bit数量级,采用常规的不归零码作信号方式的多路传输,光纤中的四波混频现象将严重地影响其传输性能.     

Pulsed interferometric optical fibre sensor detecting wiretapping in long transmission lines

A modified optical fibre based Mach-Zehnder interferometer was applied as a sensor to detect wiretapping in long transmission optical fibre lines. The signal consisting of short pulses (around 1?ns) was launched to the input of the interferometer based on the polarization maintaining fibres and polarization elements. When the sensing line was undisturbed, detectors registered only a single pulse. The additional two side pulses appear, if the wiretapping attempt took place. For robust detection of any alarm situation we proposed two-criteria algorithm to minimize false alarm rate. Moreover, slow environmental fluctuations were continuously monitored and compensated by polarization controllers. We measured frequency characteristics of the sensor and performed a hundred wiretapping attempts, which proved high performance of the sensor.     

Effects of residual second-to fourth-order dispersion in ultra high-speed optical time division multiplexing transmission

We present an expression of maximum fiber-link length,at which the output pulses can return to its originalrms time width,in an optical fiber link with up to fourth-order dispersion.The fourth order dispersionis compensated by combination of the effects of proper source chirping and negative residual second-orderdispersion.The interesting fact is that the optical pulses can restore itself at a longest distance even in caseof chirp parameter being positive,as well as being negative traditionally.The validity of the analyticalformulas is also confirmed by split-step Fourier numerical stimulation.     

10-Gbit/s optical transmission systems and devices

High-speed optical transmission is a key technology for broadband ISDN. This paper reviews recent developments in 10-Gbit/s optical transmission and in high-speed optical and electrical devices. A transmission experiment through 140 km-long fiber is also described.     

Dynamic characteristics of a polyimide-liquid-crystal structure for optical informationprocessing systems

Holographic methods are used to conduct investigations on the dynamic characteristics of high-resolution optically controlled space-time light modulators. The diffraction grating is written with the second harmonic of a pulsed neodymium laser, and is read out by a cw He-Ne laser. A study is made of how the diffraction efficiency and the time characteristics of a polyimide-liquid-crystal structure are influenced by the supply pulse length, the writing energy density, and also the boundary conditions. Zh. Tekh. Fiz. 67, 95–99 (January 1997)     

Performance evaluation of optical systems operating on long fibre links

We show how to evaluate the performance of optical systems operating in long fibre links, focusing the study on the signal propagation. A comparison between the performance of single- and multichannel systems is reported, considering conventional and soliton signals. A study on the propagation in the presence of polarization mode dispersion is also reported, showing how the Kerr nonlinearity can also compensate this degradation.     

Fabrication and transmission experiments of distributed feedback laser modules for 2.5 Gb s-1 optical transmission systems

A distributed feedback (DFB) laser module has been developed for 2.5 Gbs^-1 optical transmission systems. The DFB laser has a multiple-quantum-well (MQW) active layer and a planar buried heterostructure (PBH) for a low threshold current and stable singlemode operation with low chirping. A PBH DFB laser module with a single-mode fibre pigtail and an optical isolator was designed and fabricated by employing a single lens and a laser welding method. The fabricated MQW PBH DFB laser module is shown to be a suitable light source for 2.5 Gb s^-1 optical transmission systems with a minimum received power of-33 dBm after 47 km conventional optical fibre transmission.     

Nonreciprocal transmission of multi-band optical signals in thermal atomic systems

Multi-band signal propagation and processing play an important role in quantum communications and quantum computing.In recent years,optical nonreciprocal devices such as an optical isolator and circulator are proposed via various configurations of atoms,metamaterials,nonlinear waveguides,etc.In this work,we investigate all-optical controlled nonreciprocity of multi-band optical signals in thermal atomic systems.Via introducing multiple strong coupling fields,nonreciprocal propagation of the prob...