Ultranarrow dual-transmission-band fiber Bragg grating filter and its application in a dual-wavelength single-longitudinal-mode fiber ring laser

A fiber Bragg grating filter with ultranarrow dual-transmission bands implemented using the equivalent phase shift technique is demonstrated. A fiber ring laser that incorporates a dual-transmission-band fiber Bragg grating filter in the ring cavity is implemented. Dual-wavelength single-longitudinal-mode lasing with a wavelength spacing as small as 0.147 nm at room temperature is experimentally demonstrated.     

Performance study of a liquid-core Bragg fiber sensor in presence of a defect layer

Performance parameter of a Bragg fiber waveguide based resonant sensor in presence of a defect layer in cladding regions is theoretically studied. The Bragg fiber waveguide consists of a liquid-core surrounded by alternate high and low refractive indices materials in cladding regions. Reflectivity of the proposed waveguide based resonant sensor is formulated using transfer matrix method for a non-homogeneous multilayer cylindrical system. The waveguide shows a band gap region with a narrow defect mode in the band gap region under the considered wavelength range. Instead of taking a whole band gap as a sensing signal, here the defect peak is taken as the sensing signal. It is observed that the intensity of defect mode is more sensitive for core refractive index than the intensity of traditional band gap region (lobe). This study shows that the higher sensitivity can be achieved by creating the defect at a position in cladding region where the intensity of transmitted light lies between 40% and 90%. Presence of a defect layer is able to increase the detection accuracy of the sensor and, hence increase the overall performance of this sensor.     

Research on the air core Bragg fiber with defect state

A new method based on the Transfer Matrix Theory of Bragg fiber to research a Bragg fiber with defect state has been developed in this paper. The distribution of the electromagnetic field in the Bragg fiber is analyzed, and the loss and efficiency of the Bragg fiber are also estimated based on optical power confinement factor Γ. Thereby, the influence of the defect for transmitting characteristics in Bragg fiber has been researched.     

Bandwidth-tunable band-rejection filter based on helicoidal fiber grating pair of opposite helicities

We have developed a new type of all-fiber band-rejection filter consisting of a helicoidal long-period fiber grating pair of opposite helicities, which provides highly flexible spectral control over the rejection bandwidth. The detailed fabrication method and operation principles of the proposed bandwidth-tunable band-rejection filter are described. The proposed device enables unique rejection bandwidth tuning over more than 14 nm at the rejection level of 15 dB, with low insertion loss and polarization-dependent loss achieved by adjusting torsion stress.     

低损耗大模面积W型布喇格光纤

通过有限元法建立模型,讨论了布喇格光纤设计参量对光子带隙的影响,发现当增加掺锗玻璃环的厚度或折射率时,会使带隙移向长波.通过在紧邻纤芯处施加一层掺氟低折射率玻璃,设计了一种大模面积W型布喇格光纤.计算表明:W型布喇格光纤可以有效减小限制损耗,提高光纤的抗弯曲能力.本文设计的布喇格光纤的纤芯直径为30 μm,在波长1.06 μm限制损耗约为0.1 dB/km,且维持单一横模传输.     

Tunable microwave photonic notch filter using a dual-wavelength fiber laser with phase modulation

A novel tunable microwave photonic notch filter using a phase-modulated dual-wavelength fiber laser is presented. A stable dual-wavelength erbium-doped fiber laser with a linear cavity is formed by a polarization-maintaining uniform fiber Bragg grating (PM-FBG) and a polarization maintaining linearly chirped fiber Bragg grating (PM-LCFBG), both of which were fabricated on a high-birefringence (Hi-Bi) fiber. It is found that a stable room-temperature dual-wavelength operation can be achieved due to the presence of two reflection peaks arising from the orthogonal states of polarization (SOP) of the PM-FBG. Experimental results show stable dual-wavelength lasing operation with a wavelength separation of ∼0.36 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room temperature. The dual-wavelength fiber laser is combined with a phase modulator and a segment of single-mode fiber (SMF) as a dispersive device to form a tunable microwave photonic notch filter. By stretching the PM-FBG to tune the wavelength separation of the dual-wavelength fiber laser, a tunable microwave photonic notch filter with various free spectral ranges (FSRs) and a rejection ratio greater than 35 dB was developed.     

Two-soliton interaction in the vicinity of a defect inside a fiber Bragg grating and its application for obtaining an all-optical memory

We study the interaction between two Bragg solitons in the vicinity of a defect inside a fiber Bragg grating. A soliton that is trapped in the defect can be released by launching a second soliton. The effect can be used to obtain an all-optical memory that is not strongly sensitive to the phase and the timing arrival of the solitons.     

A plating method for metal coating of fiber Bragg grating

We present a method for metal coating optical fiber and in-fiber Bragg grating. The technology process which is based on electroless plating and electroplating method is described in detail. The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer. Under the optimum conditions, the surfaces of chemical plating and electroplating coatings are all smooth and compact. There is no visible defect found in the cross-section. Using this two-step metallization method, the in-fiber Bragg grating can be well protected and its thermal sensitivity can be enhanced. After the metallization process, the fiber sensor is successfully embedded in the 42CrMo steel by brazing method. Thus a smart metal structure is achieved. The embedding results show that the plating method for metallization protection of in-fiber Bragg grating is effective.     

一种非对称结构光纤梳状滤波器的分析

提出了一种由光纤光栅与光纤方向耦合器组成的光学梳状滤波器的理论模型,详细地分析了该滤波器的输出特性,由传输矩阵法推导出了当光纤光栅为均匀Bragg光栅时,该模型输出光谱与有关参量之间关系的数学表达式,对决定滤波器输出光谱特性及其规律的相关参量进行了详细讨论,其结果可以为今后该器件的制作及关键技术的解决提供参考.     

带有对称啁啾光纤光栅的Sagnac环滤波器

通过在光纤Sagnac环中引入对称啁啾光纤光栅,对带有光纤光栅的Sagnac环梳状滤波器进行了改进,克服了原有滤波器工作带宽小、通带间隔不等的缺点.通过对光栅参量进行适当设计,在中等折射率调制度下,可使光栅同时具有高反射率和大反射带宽,结合Sagnac环可得到大带宽、等间隔梳状滤波器.     

Acousto-optic superlattice modulator using a fiber Bragg grating

A modulator is reported in which an extensional acoustic wave is launched along a fiber Bragg grating. The acousto-optic superlattice effect causes an enhancement in reflectivity within a narrow spectral region on both sides of the Bragg wavelength. For a fixed acoustic propagation direction, the Doppler shift can be either positive or negative, depending on whether the wavelength of the incident light lies above or below the Bragg condition. The device can function as a Bragg cell and a tunable filter.     

基于保偏光纤取样光栅的宽频带滤波方法

提出一种新型刻录在保偏光纤上的取样布喇格光纤光栅.利用耦合模方程分析了此种光纤光栅的光谱特性,并利用切趾函数对光栅的输出谱进行了优化处理,最终可以实现高品质的宽频带多波长滤波.频带宽度为普通取样布喇格光纤光栅的2倍,经过切趾处理后,此种光纤光栅的边模抑制比也有显著提高.     

Volatile organic compound sensing using a surface-relief D-shaped fiber Bragg grating and a polydimethylsiloxane layer

The authors use a surface-relief fiber Bragg grating with a polydimethylsiloxane (PDMS) layer as a volatile organic compound chemical sensor. A PDMS layer is used because it is compatible with the optical properties of the grating and exhibits good chemical selectivity. As the analyte is absorbed the refractive index of the PDMS changes, causing the Bragg wavelength to shift, and this shift is correlated to chemical type and concentration. The direction and amount of the Bragg wavelength shift is dependent on the absorbed chemical. The authors demonstrate chemical differentiation between dichloromethane and acetone in gaseous states.     

Optical properties of a superconducting annular periodic multilayer structure

The optical properties of a superconducting annular Bragg reflector (SABR) are theoretically investigated based on the transfer matrix method for the cylindrical waves. For TM wave at an azimuthal mode number, $m\ge 1$, it is found that there exist some novelties compared with the usual superconducting planar Bragg reflector (SPBR). An additional high-reflectance band is seen and some reflection dips near the threshold wavelength of a superconductor are generated as well. These two special results arising from the higher order azimuthal mode of the cylindrical waves are not found in the SPBR. The results suggest that the SABR could be used to design a narrowband transmission filter or an annular resonator without introducing any physical defect layer in the structure.     

光纤光栅传感信号解调技术研究进展

光纤光栅传感器是一种新型传感器,有着非常广泛的应用前景。限制光纤光栅传感器大量实际应用的主要障碍是传感信号解调,因而,光纤光栅传感信号解调是光纤光栅传感器应用的关键技术之一。本文对现有已报道的光纤光栅传感信号的解调方法进行综述,并归类为:边缘滤波法、匹配滤波法、可调谐滤波法、光源波长可调谐扫描法、射频探测法、光栅啁啾法、CCD分光仪法、干涉法。对各种方法的原理及相关改进方法进行了阐述,并对其优缺点做了比较分析,最后,对光纤光栅传感信号的解调技术发展进行了展望。     

Multi-point, fiber-optic gas detection with intra-cavity spectroscopy

A novel intra-cavity fiber laser system is demonstrated for multi-point gas detection. The laser uses fiber Bragg gratings as wavelength-selective cavity mirrors and a tunable filter to tune the operating wavelength to the Bragg wavelength of a selected Bragg grating. The Bragg wavelengths of the gratings are chosen to be aligned to different absorption lines of a gas or gases, allowing gas concentrations at multiple locations to be determined.     

高速大容量光纤光栅解调仪的研究

采用半导体光放大器和可调谐法布里-珀罗滤波器,以环路结构组成高速扫描激光器,结合光耦合器、光环路器和光电二极管等,形成4通道大容量高速光纤光栅解调仪。系统采用2kHz的类三角波调制信号,驱动法布里-珀罗滤波器在50nm的光谱范围内进行快速扫描。通过引入光纤梳状滤波器和单峰滤波器组成的参考通路,消除法布里-珀罗滤波器的非线性效应和扫描波长漂移问题,使得解调仪具有很好的稳定性和线性度。高速光纤光栅解调仪的稳定性为2pm,分辨率为1pm,线性度为0.99957,测量精度为5pm,解调频率为2kHz。     

A Miniaturized Tunable Filter Based on a Fiber Bragg Grating Loaded by a Ceramic-Tube Microheater

A miniaturized 1.55 μm tunable fiber Bragg grating (FGB) filter is proposed and successfully demonstrated using an aluminum ceramic-tube with a tungsten thick film sleeve microheater. Fine tuning of the Bragg reflective wavelength with 0.0135 nm/^oC is achieved by adding the constant thermal distribution along the uniform FBG with a 0.3 nm bandwidth. Furthermore, a 1.5 nm linearly chirped reflection bandwidth is obtained by thermal gradient loading.     

Multiwavelength Brillouin-erbium fiber laser incorporating a fiber Bragg grating filter

In this paper, we demonstrate a multiwavelength Brillouin erbium fiber laser in a Fabry-Perot cavity. The design utilized a bidirectional oscillation provided by a fiber Bragg grating filter and a fiber loop mirror at each end of the laser cavity. A stable operation of 25 Brillouin-Stokes lines was obtained at around a 1559-nm band.     

All-optical microwave bandpass filter with negative coefficients based on a phase modulator and linearly chirped fiber Bragg gratings

A novel all-optical microwave bandpass filter with negative coefficients is presented. Positive and negative coefficients are obtained through conversion from phase modulation to intensity modulation by passing the phase-modulated optical carriers through chirped fiber Bragg gratings having group-delay responses with positive and negative slopes. A two-tap transversal microwave filter with one negative coefficient is experimentally implemented.