Infrared study of νOD modes in isotopically dilute (HDO) kieserite-type compounds MXO4·H2O (M=Mn, Co, Ni, Zn, and X=S, Se) with matrix-isolated M′ and X′O4 guest ions

The hydrogen bond strength in kieserite-type sulfate and selenate monohydrates has been studied by the method of double-matrix spectroscopy. The infrared spectra of isotopically dilute (matrix-isolated HDO molecules) kieserite-type compounds MXO₄·H₂O (M=Mn, Co, Ni, Zn, and X=S, Se) with matrix-isolated X′O₄²⁻ and M′²⁺ guest ions are presented and discussed in the region of the OD stretching modes. The OD frequencies indicate that the compounds under investigation form comparatively strong hydrogen bonds. The frequency shifts of the uncoupled OD stretching modes of the HDO molecules within the isostructural series and those influenced by the guest ions, and the strength of the hydrogen bonds formed, are discussed in terms of the respective O_wO distances, which hint at stronger hydrogen bonds for the sulfate series than for the selenate one by mistake, the larger hydrogen bond acceptor capability of SeO₄²⁻ ions compared to SO₄²⁻ ones, the different metal–water interactions and repulsion potentials of the lattice, and the reorientation of the water molecules caused by the guest ions. The shifts of the OD stretches of the ODOSe′O₃ bonds (Se′O₄²⁻ matrix isolated) to the lower wavenumbers as compared to the parent selenates are caused by the reorientation of the hydrate water molecules and strengthening the hydrogen bond to the stronger acceptor and vice versa. When smaller metal ions having smaller M–OH₂ bond lengths and, hence, stronger synergetic effect replace larger ones, the OD stretches are shifted to lower wavenumbers as compared to those due to the host M–O_wO bonds and vice versa.     

调控高稳定CAU-10-X(X=H、NO2、CH3)孔化学环境以实现N2O高效捕获

合成3种具有不同取代基（—X）的金属有机骨架（MOFs）材料CAU-10-X（X=H、NO₂、CH₃）,研究了从N₂O/N₂混合物中吸附捕获N₂O的性能。综合单组分吸附等温线、吸附热和IAST（理想溶液吸附理论）选择性的实验结果,发现CAU-10-NO₂在低压区的N₂O吸附量明显高于母体CAU-10-H,其可以有效地从N₂O/N₂混合物中捕集N₂O,而CAU-10-CH₃则表现出相反的效果。N₂O/N₂混合物的穿透模拟进一步证明CAU-10-NO₂对微量N₂O具有较好的捕获能力,循环实验显示该材料具有良好的稳定性。     

Gas phase and solution state stability of complexes L…M, where M = Cu, Ni, or Zn and L = R−C(O)NHOH (R = H, NH2, CH3, CF3, or Phenyl)

The structure and gas-phase metal affinities (M = Cu²⁺, Ni²⁺, and Zn²⁺) of formohydroxamic acid derivatives R–C(O)NHOH (R = H, NH₂, CH₃, CF₃ and Phenyl) were studied using the B3LYP/6-311+G(d,p) method of DFT theory. In order to evaluate the conformational behavior of these systems in water, we carried out CPCM-SCRF optimization calculations at the B3LYP/6-311+G(d,p) levels of theory. The obtained optimized geometries and interaction affinities of the gas and solution phase were compared. The following order of stability was found for ionic complexes of the transition metals: Cu²⁺ > Ni(t)²⁺ > Zn²⁺. The same stability order would be expected according to the Irving–Williams order of stability constants. The high-spin complexes of the Ni²⁺ were more stable than the low-spin complexes. The solvent effect reduced the observed relative stability of individual metallic complexes of substituted hydroxamic acids.     

SnCl4 versus TiCl4-mediated coupling between N-6-benzoyladenine and perbenzoylated 2-deoxypyranose: Application to the synthesis of certain homochiral acyclo and carboacyclonucleosides

1,3,4-tri- -benzoyl 2-deoxyribopyranose and persilylated N-6-benzoyladenine react in two different and regioselective ways according to the nature of the coupling reagent SnCl₄ or TiCl₄. The former Lewis acid gives rise to the anomeric mixture of N-9 nucleosides and the latter affords mainly 3′-deoxy 3′-(N-6-benzoyl-9-adenyl) glycals. These two series of derivatives constitute useful synthons for the preparation of homochiral acyclo and carboacyclonucleosides.     

Adsorption Behavior of CH2 and CH3 on Metal Clusters Cun (n=1-6)

Using density functional theory with generalized gradient approximation and hybrid functional, we studied the properties of energy, charge population, and vibration of CH2 and CH3 adsorbed on Cun (n=1-6) clusters. The results show that the DFT calculation with the hybrid functional matches the experimental results better in both cases. The calculation results indicate that the adsorption of CH2 is stronger than that of CH3. During adsorption, the charges transfer from Cu to CH2 or CH3. The obtained vibrational frequencies for different modes of CH2 and CH3 adsorbed on Cun agree well with the experimental results for the adsorption on Cu(111) surface.     

Preparation of some complexes of the type (C6H5)3P[(CH3)2AsCH2CH(R)CH2As(CH3)2] M(CO)3 (M = Mo or W,R = H or C(CH3)3)

The title compounds, which contain six-membered chelate rings locked in the chair conformation, have been prepared by the reaction of (C₆H₅)₃P with the appropriate tetracarbonyl derivative in refluxing mesitylene.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Synthesis and crystal structure of a complex bearing interesting structural motifs: [Cu (C4H7N3) H2O (4,4′-Hbpy)]·SO4·NO3

A new complex [Cu (C₄H₇N₃) H₂O (4,4′-Hbpy)]·SO₄·NO₃ was synthesized and X-ray characterized. Elemental analysis, X-ray diffraction and infrared spectroscopy of the complex were performed. The crystal system is orthorhombic. Crystal data: Fw=498.98, spacegroup: P212121. Z=4, a=14.952(3), b=20.491(4), c=6.713 Å. V=2056.7(9) Å. λ(Mo-K)=0.71070 Å. μ=12.18 cm⁻¹, D_calc=1.66 g/cm³, F₀₀₀=1032.00, R=0.062, Rw=0.087. X-ray analysis illustrated that 4,4′-bpy is mono-protonated and that there are two kinds of anions in one molecule, which give rise to the hydrogen interaction between the molecules in the crystal. Then an extended three-dimensional network is formed along the hydrogen bonds and π–π bonds between the pyridine rings.     

Theoretical calculational studies on the mechanism of thermal dissociations for RN3 (R=CH3, CH3CH2, (CH3)2CH, (CH3)3C)

Mechanisms of RN₃ (R=CH₃, CH₃CH₂, (CH₃)₂CH, (CH₃)₃C) dissociations are proposed based on CAS, MP2 and B3LYP methods. The energy gaps between the ground-state reactants RN₃ and the intersystem crossing (ISC) points are only a little lower than respective potential energy barriers of the spin-allowed reactions, ¹RN₃ → ¹RN + ¹N₂. The ISC point, therefore, is considered as a transition state of the spin-forbidden reactions, ¹RN₃ → ³RN + ¹N₂. The methods of IRC and topological analysis of electron density are used to explain and predict the thermal dissociation pathways of the reactions studied.     

Synthesis of Mg5(CO3)4(OH)2·4H2O with Flower-like Microstructure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide,Mg_5(CO_3)_4(OH)_2·4H_2O,with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant.Reaction time has an important effect on the final morphology of the product.The micro-structure and morphology of Mg_5(CO_3)_4(OH)_2·4H_2O were characterized by means of X-ray diffractometry(XRD),field-emission scanning electron microscopy(FE-SEM).Brunauer-Emmett-Teller(BET)surface areas of the samples were also measured.The probable formation mechanism of flower-like micro-structure was discussed.It was found that Mg_5(CO_3)_4(OH)_2·4H_2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate(DPC)by transesterification of dimethyl carbonate(DMC)with phenol.     

Alternative-liganden XIII. Koordinatives verhalten der chelatliganden Me2XGeMe2(CH2)2X′Me2 (Me = CH3; X, X′ = N, P, As)

In order to gain information about the coordinating properties of the chelating ligands Me₂XGeMe₂(CH₂)₂X′Me₂ (abbr. XGeCCX′) the chemical and spectroscopic results obtained during the synthesis of the M(CO)₄(XGeCCX′) complexes (M = Cr, Mo, W; X, X′ = N, P, As) are critically discussed and compared with the results for the analogous five-membered ring chelates M(CO)₄(KGeCX′).     

Phase transitions in Co(CH3COO)2·4X2O(X = H,D) from temperature-dependent vibrational spectra

The temperature variations of the isolated infrared and Raman modes of CH₃ and H₂O (D₂O) indicate two distinct discontinuities at 270 ± 5 K and 140 ± 5 K. Both stretches and librational modes of CH₃ and H₂O exhibit pronounced changes at both these temperatures and have been attributed to the dynamics of water. Another distinct discontinuity shown by CH₃ modes only at 213 ± 5 is assignable to CH₃ dynamics.     

DFT studies of structural preference of coordinated ethylene in W(CO)3(PX3)2(CH2CH2) (X=H, CH3, F, Cl, Br, and I)

A set of phosphine complexes of the type W(CO)₃(PX₃)₂(CH₂CH₂) (X=H, CH₃, F, Cl, Br, and I) were investigated by density functional theory method (BP86) to examine the effect of the substituent X on the orientation of C-C vector of the ethylene ligand with respect to one of the metal-ligand bonds as well as the donation and the backdonation in the bonding ligands of phosphine and ethylene. When X=CH₃, H, F, and Cl, the ethylene C-C vector prefers to be coplanar with metal-phosphine bonds, while for the ethylene complexes containing PBr₃ and PI₃ ligands, the structural preference is coplanarity of the ethylene and the metal-carbonyl bonds. The molecular orbital calculations and natural bond orbital analysis were used to examine the structural consequences derived from these complexes. It can be concluded that the structural preferences in the complexes have a clear relation to electronic effects of phosphine ligands. Our calculations for halide phosphine complexes, particularly for PBr₃ and PI₃, allow us to conclude that in addition to electronic effects, steric factors can also affect the orientation of the ethylene ligand in complexes.     

稀土脯氨酸配合物[RE2(L-Pro)6(H2O)4](ClO4)6的标准生成焓测定

合成了两种稀土高氯酸盐与L 脯氨酸配合物的晶体.经热重、差热、化学分析及对比有关文献,知其组成是[Pr2(L Pro)6(H2O)4](ClO4)6和[Er2(L Pro)6(H2O)4](ClO4)6,质量分数为99.24％和98.20％.选用RE(NO3)3•6H2O(RE=Pr,Er)、L Pro、NaClO4•H2O和NaNO3作辅助物,使用具有恒温环境的反应热量计,以2 mol•L－1 HCl作溶剂,分别测定了[2RE(NO3)3•6H2O＋6L Pro＋6NaClO4•H2O]和{[RE2(L PrO)6(H2O)4](ClO4)6＋6NaNO3}在298.15 K时的溶解热.设计一热化学循环求得化学反应的反应焓ΔrHm分别是：63.904 kJ•mol－1和91.017 kJ•mol－1,经计算得配合物[RE2(L Pro)6(H2O)4](ClO4)6(s)在298.15 K时的标准生成焓ΔfHm(298.15 K)分别是－6 594.78 kJ•mol－1和－6 532.87 kJ•mol－1.     

Nuclear quadrupole resonances of α-(CH3)2 TeX2 (X=Cl, Br, I) and (CH3)2 TeI4

NQR spectra were observed for α-(CH₃)₂ TeX₂ (X=Cl, Br, I) and (CH₃)₂ TeI₄ at various temperatures. The two ⁸¹Br NQR lines were observed above 110 K in α-(CH₃)₂TeBr₂. The characteristic temperature dependence of the ¹²⁷I NQR line in α-(CH₃)₂ TeI. can be explained by the 3c—4e bond of the linear I---Te---I group. The positive temperatures dependence of the lowest ¹²⁷I NQR line in (CH₃)₂TeI₄ is discussed on the basis of the electron population calculated from Townes—Dailey treatment.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

(CH3)3SiCl/TiCl4 INITIATING SYSTEM FOR CATIONIC POLYMERIZATION OF 1,3-PENTADIENE

Cationic polymerizations of 1,3-pentadiene (PD) initiated by trimethylsilyl chloride (TMSCl) incombination with TiCl_4 were carried out in n-hexane at 30℃. The yield of polymer was greatly increased bythe addition of TMSCl, indicating that the TMSCl/TiCl_4 combination is an efficient initiating system for PDcationic polymerization. However, the introduction of TMSCl gave rise to a drop in the molecular weight ofthe polymer. Kinetic results demonstrated that the polymerization initiated by TMSCl/TiCl_4 is 4.5 times fasterthan that induced by TiCl_4 alone. Various ethers were used to mediate the TMSCl/TiCl_4 initiating system.Adding diphenyl ether could increase both the yield and molecular weight of the polymer. Structural evidenceillustrates that the polymerization is indeed initiated by TiCl_4 in combination with HCl resulting fromhydrolysis by adventitious water.     

Heterobimetallic Mo---Sn complexes. Reactions of [Mo(CO)3(CH3CN)2(Cl)(SnRCl2)] (R = Me, Ph) with 4(4-XC6H4)3 (X = Cl, F, H, Me, MeO)

Three families of heterobimetallic compounds were obtained by reaction of [Mo(CO)₃(CH₃CN)₂(Cl)(SnRCl₂)] (R = Ph, Me) with P(4-XC₆H₄)₃ (X = Cl, F, H, Me, MeO). The type of compound obtained dependent on the solvent and concentration of the starting compound. So, [Mo(CO)₂(CH₃COCH₃)₂(PPh₃)(Cl)(SnRCl₂)]·nCH₃COCH₃ (R = Ph, n = 0.5; R = Me, n = 1) (type I) and [Mo(CO)₃{P(4-XC₆H₄)₃}(μ-Cl)(SnRCl₂)]₂ (R = Ph, X = Cl, F, H, Me, MeO; R = Me, X = Cl, F) (type II) were isolated from acetone solution in ca 0.05 M and 0.1 M concentrations, respectively. However, [Mo(CO)₃(CH₃CN) {P(4-XC₆H₄)₃}(Cl)(SnRCl₂)] (R = Ph, X = H; R = Me, X = Cl, F, H) (type III) were obtained from dichloromethane solution independently of the concentration used. All new complexes showed a seven-coordinate environment at molybdenum, containing Mo---Cl and Mo---Sn bonds. Mössbauer spectra indicated a four-coordination at tin for type III complexes.     

Convenient synthesis of （2S,3R,4R,5S,6R）-2-（3-（4-ethylbenzyl）-4- chlorophenyl）-6-（hydroxymethyl）-tetrahydro- 2H-pyran-3,4,5-triol

A convenient approach for the preparation of （2S,3R,4R,5S,6R）-2-（3-（4-ethylbenzyl）-4-chlorophenyl）-6-（hydroxymethyl）- tetrahydro-2H-pyran-3,4,5-triol I is developed. The target compound via four steps is synthesized from 4-bromo-2-（bromomethyl）- 1-chlorobenzene and the isomers of undesired ortho-products were avoided during the preparation.     

Unexpected structural analogy between early and late 3d transition metal alkoxide carboxylates: Synthesis and single crystal X-ray study of Ni6(OH)2(OR)6(OCOR)2, R = C2H4NMe2, R = H, CH3

Modification of the liquid Ni(OR^N)₂, R^N = C₂H₄NMe₂, with stoichiometric or sub-stoichiometric amounts of carboxylic acids, HCOOH or CH₃COOH, results in formation of crystalline heteroleptic complexes Ni₆(OH)₂(OR^N)₆(OCOR)₂, R = H (1), CH₃ (3) with the core structure closely analogous to that observed earlier for hexanuclear titanium (IV) alkoxide carboxylates and derived from hexagonal packing of the donor atoms.