Mechanism of C[bond]H bond activation/C[bond]C bond formation reaction between diazo compound and alkane catalyzed by dirhodium tetracarboxylate

The B3LYP density functional studies on the dirhodium tetracarboxylate-catalyzed C-H bond activation/C-C bond formation reaction of a diazo compound with an alkane revealed the energetics and the geometry of important intermediates and transition states in the catalytic cycle. The reaction is initiated by complexation between the rhodium catalyst and the diazo compound. Driven by the back-donation from the Rh 4d(xz) orbital to the C[bond]N sigma*-orbital, nitrogen extrusion takes place to afford a rhodium[bond]carbene complex. The carbene carbon of the complex is strongly electrophilic because of its vacant 2p orbital. The C[bond]H activation/C[bond]C formation proceeds in a single step through a three-centered hydride transfer-like transition state with a small activation energy. Only one of the two rhodium atoms works as a carbene binding site throughout the reaction, and the other rhodium atom assists the C[bond]H insertion reaction. The second Rh atom acts as a mobile ligand for the first one to enhance the electrophilicity of the carbene moiety and to facilitate the cleavage of the rhodium[bond]carbon bond. The calculations reproduce experimental data including the activation enthalpy of the nitrogen extrusion, the kinetic isotope effect of the C[bond]H insertion, and the reactivity order of the C[bond]H bond.     

Air stable,sterically hindered ferrocenyl dialkylphosphines for palladium-catalyzed C[bond]C,C[bond]N,and C[bond]O bond-forming cross-couplings

Pentaphenylferrocenyl di-tert-butylphosphine has been prepared in high yield from a two-step synthetic procedure, and the scope of various cross-coupling processes catalyzed by complexes bearing this ligand has been investigated. This ligand creates a remarkably general palladium catalyst for aryl halide amination and for Suzuki coupling. Turnovers of roughly 1000 were observed for aminations with unactivated aryl bromides or chlorides. In addition, complexes of this ligand catalyzed the formation of selected aryl ethers under mild conditions. The reactions encompassed electron-rich and electron-poor aryl bromides and chlorides. In the presence of catalysts containing this ligand, these aryl halides coupled with acyclic or cyclic secondary alkyl- and arylamines, with primary alkyl- and arylamines, and with aryl- and primary alkylboronic acids. These last couplings provide the first general procedure for reaction of terminal alkylboronic acids with aryl halides without toxic or expensive bases. The ligand not only generates highly active palladium catalysts, but it is air stable in solution and in the solid state. Palladium(0) complexes of this ligand are also air stable as a solid and react only slowly with oxygen in solution.     

1,1-Dicyano-2,2-diphenyl-1,2-dihydronaphthalene: photochromism and evidence for photochemically induced C[bond]CN bond cleavage

The photoreactions of the 1,1-dicyano-2,2-diphenyl-1,2-dihydronaphthalene (DHN-1) have been studied by photochemical techniques under various conditions at room temperature. A transient species, T(C), with a major maximum at 545 nm in the UV-visible spectrum, detected in small yield in polar aprotic solvents and in large yield in trifluoroethanol (TFE) and hexafluoropropan-2-ol (HFP), is assigned as a carbocation (1-cyano-2,2-diphenylnaphthalenium), which is generated photochemically by elimination of CN(-). The decay of T(C) was found to be a first-order process in HFP, in which the longest lifetime of 0.4 s was observed; in TFE, the carbocation decays on the ms timescale, while the shortest lifetime of 1 micros was found in ethanol. The yield of T(C) increases strongly upon addition of water to alcohols or acetonitrile, and remains substantial in the presence of large amounts of water (1-20 M). On addition of water to TFE or HFP, the lifetime of the carbocation becomes much shorter. This is supported by pulse-induced charge formation due to the carbocation and release of CN(-); the conductivity decay is related to the lifetime of the carbocation under selected conditions. In addition, a major irreversible and a minor thermally reversible photoprocess were spectroscopically observed in solvents of low as well as high polarity. The former photoproduct, absorbing below 300 nm, is tentatively ascribed to benzobicyclohexenes A produced by phenyl-vinylmethane rearrangement. In the latter process, a longer-lived benzoquinodimethane derivative B, having a maximum at 400-430 nm, is formed; this is related to ring opening and closure and represents a new example of photochromic ten-electron electrocyclisation. The distinct differences between the photochromism of DHN and that of dihydroazulene (DHA) stem mainly from stereoelectronic effects. This study, however, has also revealed that photochemically induced bond heterolysis and photochemical/thermal electrocyclisation, representing two basic processes of photochromism, may occur in one molecular unit.     

Cyclopentadienone synthesis by rhodium(I)-catalyzed [3 + 2] cycloaddition reactions of cyclopropenones and alkynes

The Rh(I)-catalyzed [3 + 2] cycloaddition of cyclopropenones and alkynes is found to provide a highly efficient and regiocontrolled route to cyclopentadienones (CPDs), building blocks of widespread use in the synthesis of natural and non-natural products, therapeutic leads, polymers, dendrimers, devices, and antigen presenting scaffolds. The versatility of the method is explored with 23 examples representing a wide range of alkyne variations (arylalkyl-, dialkyl-, heteroarylalkyl-) and diaryl- as well as arylalkylcyclopropenones. The reactions often proceed in high yield using minimal catalyst loadings and in all cases examined proceed with high or complete regioselectivity. The reaction is readily scalable to produce gram quantities of cycloadduct and provides a unique and versatile route to CPDs that would be otherwise difficult to obtain.     

Unusual pathways for metal-assisted C[bond]C and C[bond]P coupling reactions using allenylidenerhodium complexes as precursors

The rhodium allenylidenes trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = Ph (1), p-Tol (2)] react with NaC(5)H(5) to give the half-sandwich type complexes [(eta(5)-C(5)H(5))Rh[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))] (3, 4). The reaction of 1 with the Grignard reagent CH(2)[double bond]CHMgBr affords the eta(3)-pentatrienyl compound [Rh(eta(3)-CH(2)CHC[double bond]C[double bond]CPh(2))(PiPr(3))(2)] (6), which in the presence of CO rearranges to the eta(1)-pentatrienyl derivative trans-[Rh[eta(1)-C(CH[double bond]CH(2))[double bond]C[double bond]CPh(2)](CO)(PiPr(3))(2)] (7). Treatment of 7 with acetic acid generates the vinylallene CH(2)[double bond]CH[bond]CH[double bond]=C=CPh(2) (8). Compounds 1 and 2 react with HCl to give the five-coordinate allenylrhodium(III) complexes [RhCl(2)[CH[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (10, 11). An unusual [C(3) + C(2) + P] coupling process takes place upon treatment of 1 with terminal alkynes HC[triple bond]CR', leading to the formation of the eta(3)-allylic compounds [RhCl[eta(3)-anti-CH(PiPr(3))C(R')C[double bond]C[double bond]CPh(2)](PiPr(3))] [R' = Ph (12), p-Tol (13), SiMe(3) (14)]. From 12 and RMgBr the corresponding phenyl and vinyl rhodium(I) derivatives 15 and 16 have been obtained. The previously unknown unsaturated ylide iPr(3)PCHC(Ph)[double bond]C[double bond]C[double bond]CPh(2) (17) was generated from 12 and CO. A [C(3) + P] coupling process occurs on treatment of the rhodium allenylidenes 1, 2, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(p-Anis)(2)](PiPr(3))(2)] (20) with either Cl(2) or PhICl(2), affording the ylide-rhodium(III) complexes [RhCl(3)[C(PiPr(3))C[double bond]C(R)R'](PiPr(3))] (21-23). The butatrienerhodium(I) compounds trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (28-31) were prepared from 1, 20, and trans-[RhCl[[double bond]C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] [R = CF(3) (26), tBu (27)] and diazomethane; with the exception of 30 (R = CF(3), R' = Ph), they thermally rearrange to the isomers trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C[double bond]C(R)R'](PiPr(3))(2)] (32, 33, and syn/anti-34). The new 1,1-disubstituted butatriene H(2)C[double bond]C[double bond]C[double bond]C(tBu)Ph (35) was generated either from 31 or 34 and CO. The iodo derivatives trans-[RhI(eta(2)-H(2)C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] [R = Ph (38), p-Anis (39)] were obtained by an unusual route from 1 or 20 and CH(3)I in the presence of KI. While the hydrogenation of 1 and 26 leads to the allenerhodium(I) complexes trans-[RhCl[eta(2)-H(2)C[double bond]C[double bond]C(Ph)R](PiPr(3))(2)] (40, 41), the thermolysis of 1 and 20 produces the rhodium(I) hexapentaenes trans-[RhCl(eta(2)-R(2)C[double bond]C[double bond]C[double bond]C[double bond]C[double bond]CR(2))(PiPr(3))(2)] (44, 45) via C-C coupling. The molecular structures of 3, 7, 12, 21, and 28 have been determined by X-ray crystallography.     

Chemistry of cyclopropenones: synthesis of new pyrrolo[2,1-b]-1,3,4-oxadiazoles

2,3-Diphenylcyclopropenone (1) reacts with ylidene-N-phenylhydrazine-carbothioamides 2a-e to form the pyrrolo[2,1-b]-1,3,4-oxadiazoles 5a-e.     

Rapid in situ synthesis of [C]methyl azide and its application in C click-chemistry

We synthesized [¹¹C]methyl azide ([¹¹C]MeA) by reacting [¹¹C]methyl iodide ([¹¹C]MeI) in situ with an azide-donor and used it in the synthesis of ¹¹C-labeled 1,2,3-triazoles. A one-pot click approach comprised the infusion of gaseous [¹¹C]MeI into a mixture of NaN₃, ethynylbenzene, and CuI in water at a temperature of 100 °C yielding the ¹¹C-triazole in radiochemical yields (RCY) of 25%. In a two-step labeling protocol, we synthesized the [¹¹C]MeA in acetonitrile in advance to the click step. Using the more soluble complex as source of , a much higher trapping efficiency of [¹¹C]MeI in this solvent ensured an almost quantitative conversion of [¹¹C]MeI to [¹¹C]MeA within 5-10 min at room temperature. The [¹¹C]MeA was thereafter reacted with ethynylbenzene at 100 °C yielding 1-[¹¹C]methyl-4-phenyl-1H-1,2,3-triazole in preparative RCY of 60%. As a final proof of applicability, we used ¹¹C-click-chemistry for the labeling of N-terminal 4-ethynylbenzene derivatized d-Glu-d-Tyr-[Cys-Tyr-Trp-Lys-Thr-Cys]-Thr, a cyclic water-soluble Tyr³-octreotate derivative.     

Reactions of zirconacyclopentadienes with C [double bond] ), C [double bond] N, and N [double bond] N moieties with electron-withdrawing groups: formation of six-membered heterocycles

Reactions of zirconacyclopentadienes with diethyl ketomalonate gave alpha-pyrans in excellent yields in the presence of BiCl3. In the absence of BiCl3, zirconacyclopentadienes did not react with diethyl ketomalonate. Tetraphenylzirconacyclopentadiene reacted with diethyl ketomalonate in the presence of BiCl3 to give a ring-opening product, dienolic ether, in 53% yield. The structures of the alpha-pyran prepared from diethyldiphenylzirconacyclopentadiene and the ring-opening product were determined by X-ray analysis. When oximinosulfonate was added to tetraethylzirconacyclopentadiene in THF at -78 degrees C, 3,4,5,6-tetraethylpyridine-2-carbonitrile was obtained in 95% yield within 10 min. The structure of the product was confirmed by X-ray analysis. When tetraethylzirconacyclopentadiene was treated with azodicarboxylate in the presence of 2 equiv of CuCl at -78 degrees C, 1,2-dialkoxycarbonyl-3,4,5,6-tetraethyl-1,2-dihydropyridazine derivatives were obtained. The structure of one of dihydropyridazine was also confirmed by X-ray analysis.     

O/C bond cleavage of CO2 by NiI

Reaction of (PNP)Ni, where PNP is [((t)Bu2PCH2SiMe2)2N](-1), with CO2 occurs rapidly even at -60 degrees C to form exclusively the product of transposition of the amide N and one CO2 oxygen: [((t)Bu2PCH2SiMe2)2O]Ni(NCO). DFT(B3LYP) evaluation of several candidate intermediates for breaking two Si/N and one C/O bond and forming two Si/O and one N/C bond reveal species at and below the energy of the separated particles, and establish the location of the spin densities in each.     

Evidence for formation of silenes strongly influenced by reversed Si[double bond]C bond polarity

[reaction: see text] Transient silenes that are strongly influenced by reversed Si[double bond]C bond polarization are formed upon heating of tris(trimethylsilyl)silylamides. The silenes are trapped with 2,3-dimethyl-1,3-butadiene to quantitatively yield only one of the possible diastereomers of the functionalized cyclic allylsilanes.     

Determination of dibenzo[b,f]-1,4-oxazepine by diazotization cleavage of azomethine bond

A spectrophotometric determination of dibenzo[b,f]-1,4-oxazepine (CR) has been elaborated, which is based on a diazotation cleavage of azomethine bond followed by a coupling reaction. Twelve coupling agents have been used in the experiments and the following three agents have been recommended for the determination: N-(1-naphthyl)ethylenediamine dihydrochloride (L(Q) = 85 mg/ml), 7-hydroxy-4-methyl coumarin (L(Q) = 105 mg/ml) and 1-naphthol (L(Q) = 110 mg/ml). 2-[2-(hydroxy-l-naphthylazo) phenoxy]benzaldehyde has been identified by (1)H and (13)C NMR and elementary analysis as the product which results from the diazotization reaction followed by coupling of the CR substance with 2-naphthol. The azo-dye prepared by the described reactions shows azo-hydrazo tautomerism.     

Activation of arene C[bond]H bonds by a cationic hafnium silyl complex possessing an alpha-agostic Si[bond]H interaction

The reaction of Cp2Hf(SiMes2H)Me (1) with B(C6F5)3 produces zwitterionic Cp2Hf(eta2-SiHMes2)(mu-Me)B(C6F5)3 (2), which is stable for >8 h at -40 degrees C in toluene-d8. Spectroscopic data provide evidence for an unusual alpha-agostic Si-H interaction in 2. At room temperature, 2 reacts with the C-H bonds of aromatic hydrocarbons such as benzene and toluene to produce Cp2Hf(Ph)(mu-Me)B(C6F5)3 (3), isomers of Cp2Hf(C6H4Me)(mu-Me)B(C6F5)3 (4-6), and Cp2Hf(CH2Ph)(mu-Me)B(C6F5)3 (7), respectively. The reaction involving benzene is first-order in both 2 and benzene; rate = k[2][C6H6]. Mechanistic data including activation parameters (DeltaH = 19(1) kcal/mol; DeltaS = -17(3) eu), a large primary isotope effect of 6.9(7), and the experimentally determined rate law are consistent with a mechanism involving a concerted transition state for C-H bond activation.     

Carbon [bond] hydrogen bond activation by titanium imido complexes. Computational evidence for the role of alkane adducts in selective C [bond] H activation

This paper reports calculations that probe the role of R (hydrocarbon) and R' (ligand substituent) effects on the reaction coordinate for C [bond] H activation: Ti(OR')(2)(=NR') + RH --> adduct --> transition state --> (OR')(2)Ti(N(H)R')(R). Compounds with R = H, Me, Et, Vy, cPr, Ph, Cy, Bz, and cubyl are studied using quantum (R' = H, SiH(3), SiMe(3)) and classical (R' = Si(t)Bu(3)) techniques. Calculated geometries are in excellent agreement with data for experimental models. There is little variability in the calculated molecular structure of the reactants, products, and most interestingly, transition states as R and R' are changed. Structural flexibility is greatest in the adducts Ti(OR')(2)(=NR')...HR. Despite the small structural changes observed for Ti(OR')(2)(double bond] NR') with different R', significant changes are manifested in calculated electronic properties (the Mulliken charge on Ti becomes more positive and the Ti [double bond] N bond order decreases with larger R'), changes that should facilitate C [bond] H activation. Substantial steric modification of the alkane complex is expected from R [bond] R' interactions, given the magnitude of Delta G(add) and the conformational flexibility of the adduct. Molecular mechanics simulations of Ti(OSi(t)Bu(3))(2)([double bond] NSi(t)Bu(3))...isopentane adducts yield an energy ordering as a function of the rank of the C [bond] H bond coordinated to Ti that is consistent with experimental selectivity patterns. Calculated elimination barriers compare very favorably with experiment; larger SiH(3) and TMS ligand substituents generally yield better agreement with experiment, evidence that the modeling of the major contributions to the elimination barrier (N [bond] H and C [bond] H bond making) is ostensibly correct. Calculations indicate that weakening the C [bond] H bond of the hydrocarbon yields a more strongly bound adduct. Combining the different conclusions, the present computational research points to the adduct, specifically the structure and energetics of the substrate/Ti-imido interaction, as the main factor in determining the selectivity of hydrocarbon (R) C [bond] H activation.     

Palladium-catalyzed synthesis of benzosilolo[2,3-b]indoles via cleavage of a C(sp3)-Si bond and consequent intramolecular C(sp2)-Si coupling

An efficient process involving Pd-catalyzed selective cleavage of a C(sp(3))-Si bond and consequent intramolecular C(sp(2))-Si coupling has been developed, affording benzosilolo[2,3-b]indoles as a new type of silicon-bridged polyheteroarene in excellent yields. Aldehyde was found for the first time to be able to promote the efficiency of the catalytic process remarkably.     

Electroswitchable photoluminescence activity: synthesis, spectroscopy, electrochemistry, photophysics, and X-ray crystal and electronic structures of [Re(bpy)(CO)3(C[triple bond]C[bond]C6H4[bond]C[triple bond]C)Fe(C5Me5)(dppe)][PF6](n) (n = 0, 1)

A novel heterobimetallic alkynyl-bridged complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)], 1, and its oxidized species, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 2, have been synthesized and their X-ray crystal structures determined. A related vinylidene complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond](H)C[double bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 3, has also been synthesized and characterized. The cyclic voltammogram of 1 shows a quasireversible reduction couple at -1.49 V (vs SCE), a fully reversible oxidation at -0.19 V, and a quasireversible oxidation at +0.88 V. In accord with the electrochemical results, density-functional theory calculations on the hydrogen-substituted model complex Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)H(5))(dHpe) (Cp = C(5)H(5), dHpe = H(2)P[bond](CH(2))(2)[bond]PH(2)) (1-H) show that the LUMO is mainly bipyridine ligand pi* in character while the HOMO is largely iron(II) d orbital in character. The electronic absorption spectrum of 1 shows low-energy absorption at 390 nm with a 420 nm shoulder in CH(2)Cl(2), while that of 2 exhibits less intense low-energy bands at 432 and 474 nm and additional low-energy bands in the NIR at ca. 830, 1389, and 1773 nm. Unlike the related luminescent rhenium(I)-alkynyl complex [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C[bond]H)], 4, complex 1 is found to be nonemissive, and such a phenomenon is attributed to an intramolecular quenching of the emissive d pi(Re) --> pi*(bpy) (3)MLCT state by the low-lying MLCT and LF excited states of the iron moiety. Interestingly, switching on of the luminescence property derived from the d pi(Re) --> pi*(bpy) (3)MLCT state can be demonstrated in the oxidized species 2 and the related vinylidene analogue 3 due to the absence of the quenching pathway.     

Utilisation of [11C]-labelled boron carbonyl complexes in palladium carbonylation reaction

The use of the [(11)C]BH(3).CO complex as a source of carbon monoxide in the carbonylation of iodobenzene catalysed by palladium(0) is described, which allows the synthesis of an amide and a lactone in a straightforward manner.