Vibrational and electronic properties of a Cu<Subscript>90</Subscript>Nb<Subscript>10</Subscript> nanocrystalline composite

The vibrational, electronic, and superconducting properties of a Cu₉₀Nb₁₀ nanocrystalline composite undergoing a transition from a coarse-grained state to a nanocrystalline state are investigated using neutron scattering and low-temperature heat capacity measurements. It is found that, compared to a coarse-grained sample, the nanocomposite is characterized by a higher density of low-frequency excitations and a decrease both in the density of states and in the superconducting transition temperature due to the size effect.     

Vibrational and electronic characteristics of Zr<Subscript>70</Subscript>Pd<Subscript>30</Subscript>, Zr<Subscript>80</Subscript>Pt<Subscript>20</Subscript> icosahedral quasicrystals and their amorphous Counterparts

The heat capacity of Zr₇₀Pd₃₀ and Zr₈₀Pt₂₀ icosahedral quasicrystals and their amorphous counterparts is studied in the temperature range 1.5–500 K in order to establish a correlation between the short-range atomic order and the physical properties of these compounds. A comparison of the data made it possible to reveal changes in the vibrational spectra within the low-and high-energy ranges, as well as in the density of states, superconducting characteristics, electron-phonon interaction, and anharmonicity of the lattice thermal vibrations and to calculate the main average frequencies (moments) characterizing the vibrational spectra. The lower superconducting transition temperature T _c of the quasicrystals as compared to that of the amorphous counterparts can be associated with the decrease in the density of states on the Fermi surface, the hardening of the phonon spectrum, and the weakening of the electron-phonon coupling.     

Structural and electronic properties of Ni<Subscript>5</Subscript>Nb<Subscript>3</Subscript>Zr<Subscript>5</Subscript> clusters as a local structural unit of Ni-Nb-Zr glassy alloys

We calculate electronic states of fifty icosahedral Ni₅Nb₃Zr₅ clusters and optimize their structures by first principles calculations within the generalized gradient approximation. Based on the energetic stability and the atomic configuration, we search for some candidates for the local structural units of Ni₃₆Nb₂₄Zr₄₀ glassy alloys by comparing with the experimental data measured by the XAFS method. The Ni-centered icosahedral Ni₅Nb₃Zr₅ clusters containing a Nb-triangle are proposed as the structural units, which in turn combine into local structures of the glassy alloy.     

Mechanical alloying of Ni<Subscript>80</Subscript>Ta<Subscript>20</Subscript> and Ni<Subscript>80</Subscript>Nb<Subscript>20</Subscript>. Crystallization of the amorphous phase

The sequence and crystallization kinetics of the amorphous phase have been analyzed by differential scanning calorimetry and X-ray diffraction for mechanochemically activated Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ samples. The formation of equilibrium products from the amorphous phase occurs through the formation of metastable products of the A3 type. The kinetic parameters (activation energy and reaction order) and thermodynamic characteristics of this process are determined. Crystallization of the amorphous phase for the Ni₈₀Ta₂₀ and Ni₈₀Nb₂₀ systems occurs due to the growth of existing nuclei through the polymorphic and eutectic mechanisms, respectively. The thermal effects of the synthesis of equilibrium products from a mechanochemically activated mixture of components are identified.     

Features of the formation of an oxide layer on the surface of amorphous Zr<Subscript>41.2</Subscript>Ti<Subscript>13.8</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10.0</Subscript>Be<Subscript>22.5</Subscript> alloy

Field investigations were performed into the nature of oxidation of Zr_41.2Ti_13.8Cu_12.5Ni_10.0Be_22.5 alloy (Vitreloy-1), a new alloy highly promising for in -vessel mirrors of the ITER (International Thermonuclear Experimental Reactor). The main methods of investigation were X-ray photoelectron spectroscopy and multi-angle ellipsometry. The resistance of the optical properties of Vitreloy-1 against radiation impact was explained by the oxidation of the surface layer, based on the features of the diffusion process in amorphous alloys and of interaction between amorphous metal alloys with hydrogen.     

Formation and structure of nanocrystals in bulk Zr<Subscript>50</Subscript>Ti<Subscript>16</Subscript>Cu<Subscript>15</Subscript>Ni<Subscript>19</Subscript> metallic glass

The possible formation of a nanocrystalline structure in controlled crystallization of a bulk Zr₅₀Ti₁₆Cu₁₅Ni₁₉ amorphous alloy has been studied using differential scanning calorimetry, transmission and high-resolution electron microscopy, and x-ray diffraction. It was established that crystallization of the alloy at temperatures above the glass formation point occurs in two stages and brings about the formation of a nanocrystalline structure consisting of three phases. Local spectral x-ray analysis identified the composition and structure of the phases formed.     

Glass-forming ability and thermal stability of Fe<Subscript>62</Subscript>Nb<Subscript>8−x</Subscript>Zr<Subscript>x</Subscript>B<Subscript>30</Subscript> and Fe<Subscript>72</Subscript>Zr<Subscript>8</Subscript>B<Subscript>20</Subscript> amorphous alloys?

Glass-forming ability (GFA) and thermal stability of Fe₆₂Nb₈B₃₀, Fe₆₂Nb₆Zr₂B₃₀ and Fe₇₂Zr₈B₂₀ at % amorphous alloys were investigated by calorimetric (DSC and DTA) measurements. The crystallization kinetics was studied by DSC in the mode of continuous versus linear heating and it was found that both the glass transition temperature, T _g , and the crystallization peak temperature, T _p , display strong dependence on the heating rate. The partial replacement of Nb by Zr leads to lower T _g and T _x temperatures and causes a decrease of the supercooled liquid region. JMA analysis of isothermal transformation data measured between T _g and T _x suggests that the crystallization of the Fe₆₂Nb₈B₃₀ and Fe₆₂Nb₆Zr₂B₃₀ amorphous alloys take place by three-dimensional growth with constant nucleation rate. Nb enhances the precipitation of the metastable Fe₂₃B₆ phase and stabilizes it up to the third crystallization stage. Zr addition increases the lattice constant of Fe₂₃B₆ and, at the same time, decreases the grain size.     

Formation,thermal stability and mechanical properties of Ti<Subscript>42.5</Subscript>Zr<Subscript>7.5</Subscript>Cu<Subscript>40</Subscript>Ni<Subscript>5</Subscript>Sn<Subscript>5</Subscript> bulk metallic glass

Ti_42.5Zr_7.5Cu₄₀Ni₅Sn₅ bulk metallic glass with a critical diameter of 4 mm was fabricated by the conventional copper mould casting method. The supercooled liquid region ΔT _x, reduced glass transition temperature T _rg, γ parameter, and δ parameter of the alloy were measured to be 63.9 K, 0.561, 0.393, and 1.400, respectively, implying that the alloy has an excellent glass-forming ability. The bulk metallic glass exhibits high compressive fracture strength of 2162 MPa with distinct plastic strain of 0.9%. The fracture surface consists mainly of vein-like patterns, typical of bulk glassy alloys. Supported by the Program for New Century Excellent Talents in University of China and the National Natural Science Foundation of China (NSFC)(Grant No. 50771040)     

Stress relaxation in an Zr<Subscript>52.5</Subscript>Ti<Subscript>5</Subscript>Cu<Subscript>17.9</Subscript>Ni<Subscript>14.6</Subscript>Al<Subscript>10</Subscript> bulk metallic glass

The isothermal relaxation of stresses in a bulk metallic glass is measured at temperatures below the glass transition point. The kinetic law of relaxation is determined. It is argued that the stress relaxation in the temperature range covered is due to the irreversible structural relaxation oriented by an external stress and characterized by a distribution of activation energies.     

Compression behavior of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass up to 24 GPa

The compression of a Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is investigated at room temperature up to 24 GPa using in-situ high pressure energy dispersive X-ray diffraction with a synchrotron radiation source. The pressure-induced structural relaxation is exhibited. It is found that below about 8 GPa, the existence of excess free volume contributes to the rapid structural relaxation, which gives rise to the rapid volumetric change, and the structural relaxation results in the structural stiffness under higher pressure.     

Structural relaxation of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass under high pressure

Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is annealed at 573 K under 3 GPa and its structural relaxation is investigated by X-ray diffraction, ultrasonic study, compression as well as sliding wear measurements. It is found that after the ZrTiCuNiBe BMG sample was annealed under high pressure, the mechanical properties were improved. Moreover, theBMG with relaxed structure exhibits markedly different acoustic properties. These results are attributed to the fact that relaxation under high-pressure results in a microstructural transformation in the BMG.     

Higher order elastic moduli of the bulk metallic glass Zr<Subscript>52.5</Subscript>Ti<Subscript>5</Subscript>Cu<Subscript>17.9</Subscript>Ni<Subscript>14.6</Subscript>Al<Subscript>10</Subscript>

The effect of elastic loading on the velocity of propagation of acoustic waves in a solid is calculated (to the second order in the applied load). The results of the calculations and the experimental data on the effect of uniaxial loading on the propagation of ultrasonic waves in the bulk metallic glass Zr_52.5Ti₅Cu_17.9Ni_14.6Al₁₀ are used to estimate the third-order and fourth-order elastic moduli.     

The evolution of electronic configuration and magnetic characterization of Fe<Subscript>9</Subscript>Ni<Subscript>1</Subscript>, Fe<Subscript>8</Subscript>Ni<Subscript>2</Subscript> alloy in theoretical calculation

To analyze the origin of the magnetic enhancement of Fe-Ni alloy, the electronicconfigurations and magnetic properties were investigated using density functional theorybased on the first-principle. The supercell (5 × 1 × 1) of Fe,Fe₉Ni₁ and Fe₈Ni₂ were constructed. Thedefect formation energy, band structure, density of states and electron density differencewere calculated. The results showed that Ni doping changed the electronic configuration ofFe atoms, resulting in the enhancement of spin polarization of Fe and the larger Bohrmagnetic moment in Fe-Ni alloys (Fe₉Ni₁). The results showed thatthe charge transfer and the atomic spacing between Fe atoms and the dopant Ni atoms playedan important role in determination of magnetic moment. The value of Fe supercell(5 × 1 × 1), Fe₉Ni₁ and Fe₈Ni₂ were 23.14,23.34 and 22.61μ _B, respectively.     

Serrated deformation of a Pd<Subscript>40</Subscript>Cu<Subscript>30</Subscript>Ni<Subscript>10</Subscript>P<Subscript>20</Subscript> bulk amorphous alloy during nanoindentation

Depth-sensing (indentation) testing is used to study the characteristics of a serrated plastic flow in a Pd₄₀Cu₃₀Ni₁₀P₂₀ bulk amorphous alloy, and the boundaries between the regions of serrated and homogeneous plastic deformation are determined.     

Effect of heat treatment on the structure and elastic properties of a bulk Pd<Subscript>40</Subscript>Cu<Subscript>30</Subscript>Ni<Subscript>10</Subscript>P<Subscript>20</Subscript> metallic glass

The effect of heat treatment over the range from room temperature to 500°C on the elastic properties of a bulk amorphous Pd₄₀Cu₃₀Ni₁₀P₂₀ alloy was studied. It is shown that the increase in the shear modulus under crystallization of the alloy is two-staged and that the most significant increase in the modulus occurs at the second stage. The obtained results are compared to the x-ray structural data. It is also found that the density characteristics of the as-cast material change very slightly during the transformation from the amorphous to the crystal state, with the density decreasing slightly due to crystallization.     

Specific features of the electronic structure of the CeCu<Subscript>6</Subscript>, CePd<Subscript>3</Subscript>, CeSi<Subscript>2</Subscript>, and CeF<Subscript>3</Subscript> systems

The electronic structure of cerium systems, the hybridization of 4 f and outer-shell electrons, and the influence of the position of the localized 4 f level with respect to the Fermi level E _F in the conduction band have been investigated. The CeCu₆, CePd₃, CeSi₂, and CeF₃ systems have been studied using X-ray photoelectron spectroscopy. The densities of states have been calculated by the tight-binding linearized muffin-tin orbital method within the atomic sphere approximation, which takes into account the covalent character of bonds and the nonspherical distribution of the electron density. The results obtained from the calculations of the total density of states are in good agreement with the valence band X-ray photoelectron data for the systems under investigation. It has been shown that the differences in the properties of the cerium systems are determined by the specific features of their electronic structure. A strong interatomic interaction is characteristic of heavy-fermion systems.     

Kinetics of structural relaxation of bulk and ribbon Pd<Subscript>40</Subscript>Cu<Subscript>30</Subscript>Ni<Subscript>10</Subscript>P<Subscript>20</Subscript> glasses determined from electrical resistance measurements

The electrical resistances of ribbon and bulk Pd₄₀Cu₃₀Ni₁₀P₂₀ metallic glasses, whose quenching rates differ by four orders of magnitude, were precisely measured during cyclic heating. Three stages of electrical resistance relaxation are detected as the maximum heating temperature increases. The first and third stages decrease the electrical resistance, and the second stage increases it. The first stage is shown to be caused by the relaxation of deformation-induced internal stresses and not to be related to the excess free volume concentration, which differs by a factor of about 2 in the ribbon and bulk samples. The second stage reflects structural relaxation in the glass and is only partly related to its free volume. The third relaxation stage is assumed to be caused by fine precrystallization phenomena like phase separation. The effect of deformation by rolling or quenching from the temperature range of a supercooled melt on the resistance relaxation kinetics was also studied.     

Low-temperature specific heat of GdCu,GdCu<Subscript>2</Subscript>, and GdCu<Subscript>5</Subscript> antiferromagnets

It is found that the expansion of the low-temperature specific heat C _p of the antiferromagnetic metallic compounds GdCu, GdCu₂, and GdCu₅ contains a large term that is proportional to the square of temperature (δT ²). The value of δ is inversely proportional to the Néel temperature T _N. The GdCu₂ compound exhibits a strong dependence of the specific heat anomaly at T _N on an external magnetic field. The results obtained are compared with the data for other metal antiferromagnets, for example, the CuMnSb Heusler alloy.     

Effect of nanocrystallization on the mechanical and magnetic properties of finemet-type alloy (Fe<Subscript>78.5</Subscript>Si<Subscript>13.5</Subscript>B<Subscript>9</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript>)

The kinetics of primary crystallization and the effect of structural parameters of the precipitating nanocrystalline α-phase Fe-Si on changes in microhardness, coercive force, and saturation magnetization in an amorphous Finemet-type 5BDSR alloy (Fe_78.5Si_13.5B₉Nb₃Cu₁) obtained by melt quenching are studied. It is found that both an increase in bulk density and an increase in the average nanoparticle size contribute to the hardening of the amorphous/nanocrystalline alloy.     

Temperature dependence of the magnetic properties and magnetoimpedance of nanocrystalline Fe<Subscript>73.5</Subscript>Si<Subscript>16.5</Subscript>B<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript> ribbons

The temperature dependences of the magnetic properties and the magnetoimpedance effect of soft magnetic nanocrystalline Fe_73.5Si_16.5B₆Nb₃Cu₁ alloy ribbons are studied in the temperature range 24–160°C. A high temperature sensitivity of the impedance and the magnetoimpedance effect of the ribbons are detected in the ac frequency range 0.1–50 MHz. At an ac frequency of 50 MHz, the change in the impedance reaches 0.2 Ω/°C (0.5%/°C) in the temperature range 85–160°C. When the temperature increases, a monotonically decreasing character of the dependence of the magnetoimpedance effect on the applied magnetic field changes into a dependence having an increasing initial segment. The effect of temperature on the magnetoimpedance properties of the soft magnetic nanocrystalline ribbons is shown to result from temperature-induced changes in their electrical conductivity, magnetization, and effective magnetic anisotropy.