Structure refinement of large domain relaxors in the Pb(Mg1/3Ta2/3)O3-PbZrO3 system

The relaxor ferroelectric compound Pb(Mg_0.3Ta_0.6Zr_0.1)O₃ (PMT-PZ) was studied by X-ray, neutron and electron diffraction and transmission electron microscopy in the as-sintered and annealed states. The as-sintered sample was comprised of nanometer-sized 1:1 chemically ordered domains dispersed in a disordered matrix. After annealing at 1325°C the domain size increased to ∼30 nm and the degree of order exceeded 95% in terms of the volume fraction of the ordered domains, yet the sample retained its diffuse, frequency dependent relaxor characteristics. Refinements of the chemically ordered structure using the Rietveld analysis revealed that the octahedral (B) site occupancies were in excellent agreement with a “random site” model for the chemical ordering. In this charge-balanced model for the 1:1 ordered Pb(β′_1/2β″_1/2)O₃ structure the Ta cations predominantly occupy the β″ site, while the β′ site is populated by a random distribution of the Mg, Zr and remaining Ta cations. Large temperature factors for Pb and O atoms are observed in both as-sintered and annealed samples, indicating localized displacements of the Pb and O atoms. The mixed occupancy of the β′ position appears to be responsible for the relaxor characteristics in the dielectric response in spite of the growth of the chemical domains.     

Cation order-disorder in Pb(B,B)O3-related relaxors: The random-layer model investigated by Monte Carlo simulation

The charge-balanced random-layer model for ordered lead-based perovskites was investigated by using the standard Metropolis Monte Carlo method on a rigid lattice with simple ionic model. Our results show that in the structure formula Pb[B′]_1/2[B″]_1/2O₃, where all B″-sites are occupied by B^V cations, chemical order of B^II and B^V cations does exist in B′-sites and the ordered structure has an hexagonal symmetry. An order-disorder transition as a function of temperature is evidenced by an abrupt variation of both the heat capacity and a long-range order parameter. Finally, the evolution of the short-range order parameter versus temperature shows that a local order remains in B′-sites contrary to the charge-balanced random-layer model that suggests that B′-sites are randomly occupied. This local order could be helpful to clarify some experimental results.     

Nanocrystalline Sr2FeMoO6 prepared by citrate-gel method

Double perovskite Sr₂FeMoO₆ powders with small crystallite size have been synthesised with citrate-gel method. The starting solution pH was varied between 1.5 and 9.0 resulting in large differences in the phase composition and ordering of B^′/B^″ sites. The samples prepared at 975 °C had crystallite sizes under 40 nm whereas crystallite sizes of the samples prepared at 1050 °C were between 78 and 239 nm. The XRD patterns were refined with spacegroup I 4/m, which gave good results for both batches, although clearly better results were obtained with monoclinic P 2₁/n spacegroup for the 975 °C batch. The ordering and the saturation magnetization agreed well with each other after treatment at 1050 °C, but the samples prepared at 975 °C had a strongly reduced saturation magnetization from that given by the ordering.     

Disorder-order phase transition induced by size effect in bulk La2/3Sr1/3MnO3

Bulk La_2/3Sr_1/3MnO₃ ceramic samples prepared by thermal decomposition are investigated using transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). An abnormal phenomenon, where three kinds of La_2/3Sr_1/3MnO₃ phases with different structures and the same composition coexist in the same grain, has been observed. Besides the stable rhombohedral majority phase, the two other phases are a simple cubic structure with a=0.389 nm and a new hexagonal structure with a=0.544 nm, c=0.668 nm. The simple cubic phase is a residual phase of high-temperature due to the size effect and bondage of twin boundary. Image simulations have suggested that the new hexagonal phase is the La-Sr ordered structure with space group , which is converted from the disordered simple cubic phase. The formation mechanism of the ordered phase is explained from volume energy and interface energy considerations.     

High-precision frequency measurements of the ν1 + ν3 combination band of C2H2 in the 1.5 μm region

A pair of 1.5 μm semiconductor laser frequency standards have been developed for optical telecommunications use, stabilised to transitions of ¹²C₂H₂ and ¹³C₂H₂, using cavity-enhanced Doppler-free saturation absorption spectroscopy. The absolute frequencies of 41 lines of the ν₁ + ν₃ band of ¹²C₂H₂, covering the spectral region 1520-1545 nm, have been measured by use of a passive optical frequency comb generator, referenced to ¹³C₂H₂ transitions of known frequency. The mean experimental uncertainties (coverage factor k = 1) of the frequency values are 3.0 kHz (type A) and 10 kHz (type B). Improved values of the band origin ν₀, rotational constants B′ and B″, and centrifugal distortion coefficients D′, D″, H′, and H″ are presented.     

Thermal stability of A-site ordered PrBaMn2O6 manganites

The crystal structure and electromagnetic properties as well as thermal stability of the A-site ordered PrBaMn₂O₆ manganites have been investigated. These samples have been prepared by using ‘two-steps’ synthesis mode. They have tetragonal structure with no tilt of MnO₆ octahedra and show ferromagnetic metal to paramagnetic semiconductor transition. The most significant structural feature of the A-site ordered manganites is that the MnO₂ sublattice is sandwiched by two types of rock-salt layers PrO and BaO. The different degree of Pr and Ba ions in the A-sublattice is revealed. The A-site ordered PrBaMn₂O₆ sample with maximum degree of the A-site order demonstrates ferromagnetic metallic to paramagnetic insulating transition with the Curie point ∼320 K. The A-site disordered Pr_0.50Ba_0.50MnO₃ sample is ferromagnetic metal below T_C≈140 K. The cation order in these compounds is stable in air up to 1300 °C. For the partly A-site ordered samples the magnetic and electronic phase separation is observed. The magnetotransport properties of the A-site ordered manganites treated under different conditions are discussed in terms of the superexchange interactions and A-site order degree.     

Gas-sensing properties of perovskite La0.875Ba0.125FeO3 nanocrystalline powders

La_0.875Ba_0.125FeO₃ nanocrystalline powders have been prepared by a sol-gel method. The structure, conductance and gas-sensing properties were investigated. La_0.875Ba_0.125FeO₃ crystallizes as a perovskite phase with the orthorhombic structure. The La_0.875Ba_0.125FeO₃ based sensor shows good sensitivity and selectivity to alcohol gas. The highest sensitivity to 500 ppm alcohol gas reached was 58 at 170 °C. The adsorption of O₂ on the La_0.875Ba_0.125FeO₃ (0 1 0) surface was studied with the first-principles calculation based on the density functional theory. The results show that the surface states are near the Fermi energy level and that the Fe ion plays an important role in the process of oxygen adsorption, which affects the gas-sensing properties.     

BiFeO3 ceramic matrix with Bi2O3 or PbO added: Mössbauer, Raman and dielectric spectroscopy studies

In this paper Mössbauer, Raman and dielectric spectroscopy studies of BiFeO₃ (BFO) ceramic matrix with 3 or 10 wt% of Bi₂O₃ or PbO added, obtained through a new procedure based on the solid-state method, are presented. Mössbauer spectroscopy shows the presence of a single magnetically ordered phase with a hyperfine magnetic field of 50 T. Raman spectra of BFO over the frequency range of 100-900 cm⁻¹ have been investigated, at room temperature, under the excitation of 632.8 nm wavelength in order to evaluate the effect of additives on the structure of the ceramic matrix. Detailed studies of the dielectric properties of BiFeO₃ ceramic matrix like capacitance (C), dielectric permittivity (ε) and dielectric loss (tan δ), were investigated in a wide frequency range (1 Hz-1 MHz), and in a temperature range (303-373 K). The complex impedance spectroscopy (CIS) technique, showed that these properties are strongly dependent on frequency, temperature and on the added level of impurity. The temperature coefficient of capacitance (TCC) of the samples was also evaluated. The study of the imaginary impedance (−Z″) and imaginary electric modulus (M″) as functions of frequency and temperature leads to the measurement of the activation energy (E_ac), which is directly linked to the relaxation process associated with the interfacial polarization effect in these samples.     

Synthesis,photophysical properties,and photocatalytic applications of Bi doped NaTaO3 and Bi doped Na2Ta2O6 nanoparticles

Phase formation and photophysical properties of bismuth doped sodium tantalum oxide (perovskite, defect pyrochlore) nanoparticles prepared by a hydrothermal method were studied in detail. It was revealed that the synthesis conditions like NaOH concentration and bismuth precursor (NaBiO₃·2H₂O) markedly affect the crystal structure of sodium tantalum oxide. At low NaOH concentration and high bismuth precursor (NaBiO₃·2H₂O) content, Bi doped Na₂Ta₂O₆ (defect pyrochlore) phase was predominantly formed, while at higher NaOH concentration, Bi doped NaTaO₃ (perovskite) phase was formed. It was observed that the defect pyrochlore (Bi doped Na₂Ta₂O₆) phase was formed and stabilized by the presence of dopant precursor (NaBiO₃·2H₂O). The chemical analysis of the samples confirmed the doping of Bi³⁺ cations in both phases. Doping of bismuth enabled visible light absorption up to 500 nm in perovskite and defect pyrochlore type sodium tantalum oxide. Bi doped NaTaO₃ samples showed better performance for the photocatalytic degradation of rhodamine B than that of Bi doped Na₂Ta₂O₆, under visible light irritation (λ>420 nm). The present results shed light on phase formation of sodium tantalate and these results are useful in understanding properties of NaTaO₃ based compounds, synthesized by the hydrothermal method.     

Crystal structure and photoluminescence properties of Eu-activated Ba2LiB5O10 phosphors

A novel orange-yellow-emitting Ba₂LiB₅O₁₀:Eu²⁺ phosphor has been synthesized by traditional high temperature solid state reaction. A monoclinic crystal structure of Barium lithiumborates Ba₂LiB₅O₁₀ was verified by the investigation of X-ray diffraction (XRD). The compound crystallizes in the space group of P121/m1(11) (Z = 2) with the unit cell parameters a = 4.414(1) Å, b = 14.576(2) Å, c = 6.697(2) Å and β = 104.26(2)°. Barium and lithium atoms are located in distorted octahedral and tetrahedral oxygen coordinations, respectively. Upon around 365 nm excitation, the Eu²⁺-activated Ba₂LiB₅O₁₀ phosphors exhibit a single broad emission band with the maximum at about 587 nm, due to the 4f⁶5d → 4f⁷(8S_7/2) transition of Eu²⁺. This work investigates the relationship between luminescence properties and structural characterization of the Ba₂LiB₅O₁₀: Eu²⁺. This newly developed phosphor shows high potential as a phosphor conversion for white LED applications.     

Influence of mobile space charges on electrical properties of ferroelectric Bi3.5La0.5Ti3O12 thin films

Lanthanum-substituted bismuth titanate, Bi_3.5La_0.5Ti₃O₁₂ (i.e., x=0.5 in Bi_4−xLa_xTi₃O₁₂), thin films have been grown on Pt/Ti/SiO₂/Si substrates using pulsed laser deposition. The frequency dependence of the real part ε′(ω) and the imaginary part ε″(ω) of the dielectric constant has been studied. The ε′(ω) does not show any sudden change within the frequency range of 10²-10⁶ Hz. In contrast, the ε″(ω) shows a large dispersion as frequency decreases. The observed relaxation behavior in ε″(ω) can be explained in terms of a migration of oxygen vacancies in (Bi₂O₂)²⁺ layers, not in Bi₂Ti₃O₁₀ perovskite layers.     

Dielectric properties and magnetoelectric effect of (x)NiFe2O4+(1−x)Ba0.8Sr0.2TiO3 composites

Magnetoelectric composites of NiFe₂O₄ and Ba_0.8Sr_0.2TiO₃ were prepared using conventional double-sintering ceramic method. The phase formation of magnetoelectric composites was confirmed by XRD technique. Variation of dielectric constant and loss tangent at room temperature with frequency in the range 100 Hz-1 MHz has been studied. Also the variation of dielectric constant and loss tangent with temperature and composition at fixed frequencies of 1 kHz, 10 kHz, 100 kHz and 1 MHz is reported. The static value of the magnetoelectric conversion factor was measured as a function of intensity of the magnetic field. The ME voltage coefficient of about 430 μV/cm Oe was observed for 15% NiFe₂O₄+85% Ba_0.8Sr_0.2TiO₃ composite. All the samples show linear variation of magnetoelectric conversion in the presence of static magnetic field.     

Effect of Sn-doping on the structural,magnetic and magnetocaloric properties of La0.67Ba0.33Mn1−xSnxO3 compounds

Magnetocaloric effect (MCE) in fine-grained perovskite manganites of the type La_0.67Ba_0.33Mn_1−xSn_xO₃ (x=0.05, 0.1 and 0.15) were prepared by the solid-state method. The prepared samples remain single phase and exhibit paramagnetic to ferromagnetic phase transition (T_C) at 340, 325 and 288 K for x=0.05, 0.1 and 0.15, respectively. From the measured magnetization data of La_0.67Ba_0.33Mn_1−xSn_xO₃ compounds as a function of field (2 T), the associated magnetic entropy change close to their respective Curie temperatures and the relative cooling power (RCP) have been determined. Large MCE has been obtained in all samples and |ΔS_M|_max reached the highest value of 2.49 J/kg K at T_C (288 K) for the sample x=0.15, with H=2 T.     

Study of (Bi2O3)(BaxMo1−xO3) polycrystalline ceramic as relaxor ferroelectric

Solid solutions of bismuth layered (Bi₂O₃)(Ba_xMo_1−xO₃) (0.2≤x≤0.8, x is in step of 0.2) ceramics were prepared by conventional solid-state reaction of the constitutive oxides at optimized temperatures with a view to study its electrical properties. Powder X-ray diffraction has been employed for physical characterization and an average grain size of ∼16 to 22 nm was obtained. XRD study reveals the single phase structure of the samples. Dielectric properties such as dielectric constant (ε′), dielectric loss (tanδ) and ac electrical conductivity (σ_ac) of the prepared ceramics sintered at various temperatures in the frequency range 10¹–10⁷ Hz have been studied. A strong dispersion observed in the dielectric properties shows the relaxor type behavior of the ceramic. The presence of maxima in the dielectric permittivity spectra indicates the ferroelectric behavior of the samples. Impedance plots (Cole–Cole plots) at different frequencies and temperatures were used to analyze the electric behavior. The value of grain resistance increases with the increase in Ba ion concentration. The conductivity mechanism shows a frequency dependence, which can be ascribed to the space charge mainly due to the oxygen vacancies. The relaxation observed for the M″ (ω) or Z″ (ω) curves is correlated to both localized and long range conduction. A single ‘master curve’ for the normalized plots of all the modulus isotherms observed for a given composition indicates that the conductivity relaxation is temperature independent.     

Studies on fabrication of Ag/Tl2Ba2Ca2Cu3O10/CdSe heterostructures with electrochemical technique

The Ag/Tl₂Ba₂Ca₂Cu₃O₁₀/CdSe heterostructure was fabricated at room temperature by soft electrochemical processing technique for the first time. The formation of the heterostructure with non-diffusive interfaces was confirmed by X-ray diffraction. The crystallite sizes determined for Tl-2223 and CdSe films were 33 nm and 25 nm, respectively. The Tl₂Ba₂Ca₂Cu₃O₁₀ film electrodeposited onto Ag-substrate has shown the superconducting transition temperature T_c at 116.5 K and J_c = 2.1 × 10³ A/cm². These values were found to improve after the deposition of CdSe onto Ag/Tl-2223 films. The effect of red He-Ne laser irradiation on the superconducting properties of heterostructure are studied and discussed at length in this paper.     

Impedance spectroscopy study and ground state electronic properties of In(Mg1/2Ti1/2)O3

The complex perovskite oxide In(Mg_1/2Ti_1/2)O₃ (IMT) is synthesized by a solid state reaction technique. The X-ray diffraction of the sample at 30 °C shows a monoclinic phase. The dielectric properties of the sample are investigated in the temperature range from 143 to 373 K and in the frequency range from 580 Hz to 1 MHz using impedance spectroscopy. An analysis of the dielectric constant ε′ and loss tangent (tan δ) with frequency is performed assuming a distribution of relaxation times. The Cole-Cole model is used to explain the relaxation mechanism in IMT. The scaling behavior of imaginary part of electric modulus (M″) shows that the relaxation describes the same mechanism at various temperatures. The electronic structure and hence the ground state properties of IMT is studied by X-ray photoemission spectroscopy (XPS). The valence band XPS spectrum is compared with the electronic structure calculation. The electronic structure calculation indicates that the In-5s orbital introduces a significant density of states at the Fermi level, which is responsible for a high value of conductivity in IMT.     

A variable temperature structural study of the Jahn-Teller distortion in Ba2CuUO6

The structure of the ordered double perovskite Ba₂CuUO₆ has been investigated between room temperature and 800 °C using synchrotron X-ray powder diffraction. At room temperature Ba₂CuUO₆ is tetragonal, space group I4/m, a=8.82331(13) c=8.82330(13) Å, the structure being characterized by a large Jahn-Teller distortion of the CuO₆ octahedra and small out-of-phase tilts of the BO₆ octahedra. This Jahn-Teller distortion is also evident in the UV-Vis spectra. Analysis of the spontaneous tetragonal strain reveals a continuous ferroelastic phase transition near 420 °C. This appears to be related to the loss of the tilts whilst maintaining the Jahn-Teller distortion, so that the high temperature structure is in space group I4/mmm.     

Controlling metal/oxide interactions in bifunctional nanostructured model catalysts: Pd and BaO on Al2O3/NiAl(1 1 0)

We have investigated the structure and growth of Pd and BaO containing nanoparticles sequentially co-deposited on an ordered Al₂O₃/NiAl(1 1 0) by scanning tunneling microscopy (STM), and their interaction with CO and NO₂ by infrared reflection absorption spectroscopy (IRAS).Ba deposition and subsequent oxidation result in Ba_xAl_2yO_x+3y nanoparticles being formed which are characterized by high particle densities and nucleation both on regular terraces and at oxide defects. In contrast, Pd interaction with the model support is weaker and preferential nucleation occurs mainly at rotational domain boundaries and to a lesser extent at anti-phase domain boundaries. For subsequent co-deposition of Pd on preformed Ba_xAl_2yO_x+3y/Al₂O₃/NiAl(1 1 0), Pd nucleates at the Ba_xAl_2yO_x+3y nanoparticles and covers them. The reverse deposition sequence, i.e. subsequent Ba co-deposition and oxidation on preformed Pd/Al₂O₃/NiAl(1 1 0), leads to formation of small isolated Ba_xAl_2yO_x+3y nanoparticles without contact to Pd, together with large Pd crystallites modified by Ba_xAl_2yO_x+3y. The present results provide control over the degree of interaction between metal nanoparticles and oxide nanoparticles on a well-defined model catalyst and thus allow us to study effects related effects on the reactivity and catalytic behavior.     

Synthesis and luminous characteristics of Ba2MgSi2−xAlxO7: 0.1Eu, 0.1Mn phosphor for WLED

The shift of the emission band to longer wavelength (yellow-orange) of the Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺ phosphor under the 350-450 nm excitation range has been achieved by adding the codoping element (Mn²⁺) in the host. The single-host silicate phosphor for WLED, Ba₂MgSi_2−xAl_xO₇: 0.1Eu²⁺, 0.1Mn²⁺ was prepared by high-temperature solid-state reaction. It was found experimentally that, its three-color emission peaks are situated at 623, 501 and 438 nm, respectively, under excitation of 350-450 nm irradiation. The emission peaks at 438 and 501 nm originate from the transition 5d to 4f of Eu²⁺ ions that occupy the two Ba²⁺ sites in the crystal of Ba₂MgSi_2−x Al_xO₇, while the 623 nm emission is attributed to the energy transfer from Eu²⁺ ions to Mn²⁺ ions. The white light can be obtained by mixing the three emission colors of blue (438 nm), green (501 nm) and red (623 nm) in the single host. When the concentrations of the Al³⁺, Eu²⁺ and Mn²⁺ ions were 0.4, 0.1 and 0.1 mol, respectively, the sample presented intense white emission. The addition of Al ion to the host leads to a substantial change of intensity ratio between blue and green emissions. White light could be obtained by combining this phosphor with 405 nm light-emitting diodes. The near-ultraviolet GaN-based Ba₂MgSi_1.7 Al_0.3O₇: 0.1Eu²⁺, 0.1Mn²⁺ LED achieves good color rendering of over 85.     

Luminescent properties of stabled hexagonal phase Sr1−xBaxAl2O4:Eu (x=0.37-0.70)

Stabled hexagonal phase Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) was prepared by solid-state method. Result revealed that the structure behavior of the SrAl₂O₄:Eu²⁺ calcined at 1350 °C in a reducing atmosphere for 5 h strongly depended on the Ba²⁺ concentration. With increasing Ba²⁺ concentration, a characteristic hexagonal phase can be observed. When 37-70% of the strontium is replaced by barium, the structure of the prepared sample is pure hexagonal. Photoluminescence and excitation spectra of the samples with different x and doped with 2% Eu²⁺ were investigated. Changes in the emission spectra were observed in the two different phases. The green emission at 505 nm from Eu²⁺ was found to be quite strong in the hexagonal phase. The intensity and peak position of the green luminescence from Eu²⁺ changed with increasing content of Ba²⁺. The strongest green emission was obtained from Sr_0.61Ba_0.37Al₂O₄:Eu²⁺. The decay characteristics of Sr_1−xBa_xAl₂O₄:Eu²⁺ (x=0.37-0.70) showed that the life times also varied with the value of x. Furthermore, the emission colors and decay times varying with x could be ascribed to the variation of crystal lattice.