Eu photoluminescence enhancement due to thermal energy transfer in Eu2O3-doped SiO2-B2O3-PbO2 glasses system

In this work, Eu³⁺-doped lead borosilicate glasses (SiO₂-B₂O₃-PbO₂) synthesized by fusion method had their optical properties investigated as a function of temperature. Atomic Force Microscopy images obtained for a glass matrix annealed at 350 and 500 °C show a precipitated crystalline phase with sizes 11 and 21 nm, respectively. Besides, as the temperature increases from 350 to 300 K a strong Eu³⁺ photoluminescence (PL) enhancement takes place. This anomalous feature is attributed to the thermally activated carrier transfer process from nanocrystals and charged intrinsic defects states to Eu³⁺ energy levels. In addition, the PL peaks in this temperature range were assigned to the Eu³⁺ transitions ⁵D₀→⁷F₂, at 612 nm, ⁵D₀→⁷F₁, at 595 nm, and ⁵D₀→⁷F₀, at 585 nm. It was also observed that the ⁵D₀→⁷F₃ and ⁵D₀→⁷F₄ PL bands at 655 and 700 nm, respectively, show a continuous decrease in intensity as the temperature increases.     

Optical and fluorescence spectroscopy of Eu2O3-doped P2O5-K2O-KF-MO-Al2O3 (M = Mg, Sr and Ba) glasses

Fluorophosphate glasses of composition, P₂O₅ + K₂O + KF + MO + Al₂O₃ + xEu₂O₃ (M = Mg, Sr and Ba; x = 0.01, 0.05, 0.1, 1.0, 2.0, 4.0 and 6.0 mol%) were prepared and characterized their optical properties. Crystal-field (CF) analysis revealed a relatively weak CF strength around Eu³⁺ ions in the Ba based fluorophosphate glasses. The Judd-Ofelt parameters have been estimated from the oscillator strengths of ⁷F₀ → ⁵D₂, ⁷F₀ → ⁵D₄ and ⁷F₀ → ⁵L₆ absorption transitions of Eu³⁺ ions and were used to evaluate the radiative properties of the ⁵D₀ → ⁷F_J (J = 0-4) transitions. Considerable variation has been observed in the relative intensity ratio of ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ transitions of Eu³⁺ ions due to change in the alkaline earth metal ions. The decay of the ⁵D₀ level shows single exponential and less sensitive to Eu³⁺ ions concentration as well as MgO/SrO/BaO modifiers.     

VUV-UV luminescence of magnetoplumbite: (Sr0.96−xBa0.04)Al12−yMgyO19:Tbx

The title compounds (Sr_0.96−xBa_0.04)Al_12−yMg_yO₁₉:Tb_x (0<x<0.4; 0<y<0.18) are single-phase magnetoplumbite determined by X-ray powder diffraction analysis. The characteristic emission lines of ⁵D₃→⁷F_j (j=2, 3, 4, 5) and ⁵D₄→⁷F_j (j=4, 5, 6) of Tb³⁺ are recorded under the VUV excitation. The intensive luminescence mainly comes from ⁵D₃→⁷F_j transition when the concentration of Tb³⁺ is low. However, when the concentration of Tb³⁺ starts to increase from very low concentration, ⁵D₄→⁷F_j transition is becoming dominant. Three broad excitation bands at 165, 193 and 233 nm have been observed. The band at 165 nm originates from the overlap between the host absorption and the charge transfer of Tb³⁺-O²⁻. The other two broad bands are the first spin-allowed and the spin-forbidden of 4f-5d transition, respectively. The experimental observation of the 4f-5d transition of Tb³⁺ is consistent well with the theoretical expectations.     

Emission analysis of Pr and Tm: Ca2Gd2W3O14 phosphors

5 mol% of Pr³⁺ and Tm³⁺ ions activated calcium gadolinium tungstate (Ca₂Gd₂W₃O₁₄₎ phosphors were synthesized by traditional solid state reaction method. Crystalline phase structure was identified from the X-ray diffraction (XRD) profiles. From the scanning electron microscopy (SEM) images, we have observed the agglomeration of the particles, and average grain size is around 40-300 nm. Using the energy dispersive X-ray analysis (EDAX) and Fourier transform infrared (FTIR) spectra, identified the elements and functional groups present in the prepared phosphors. The emission spectrum of Pr³⁺: Ca₂Gd₂W₃O₁₄ powder phosphors have shown an intense red emission at 615 nm with the excitation wavelength λ_exci=450 nm and thus these red color emitting powder phosphors are used as one of the components in the preparation of WLEDs. The excitation spectrum of Tm³⁺: Ca₂Gd₂W₃O₁₄ powder phosphor has shown a ligand to metal charge transfer (W-O) band (LMCT) within the WO₄²⁻ group. Emission spectrum of Tm³⁺: Ca₂Gd₂W₃O₁₄ phosphors have shown blue emissions at 453 nm (¹D₂→³F₄).     

A white light emitting phosphor Sr1.5Ca0.5SiO4:Eu, Tb, Eu for LED-based near-UV chip: Preparation, characterization and luminescent mechanism

In this work, we report preparation, characterization and luminescent mechanism of a phosphor Sr_1.5Ca_0.5SiO₄:Eu³⁺,Tb³⁺,Eu²⁺ (SCS:ETE) for white-light emitting diode (W-LED)-based near-UV chip. Co-doped rare earth cations Eu³⁺, Tb³⁺ and Eu²⁺ as aggregated luminescent centers within the orthosilicate host in a controlled manner resulted in the white-light phosphors with tunable emission properties. Under the excitation of near-UV light (394 nm), the emission spectra of these phosphors exhibited three emission bands: one broad band in the blue area, a second band with sharp lines peaked in green (about 548 nm) and the third band in the orange-red region (588-720 nm). These bands originated from Eu²⁺ 5d→4f, Tb³⁺⁵D₄→⁷F_J and Eu³⁺⁵D₀→⁷F_J transitions, respectively, with comparable intensities, which in return resulted in white light emission. With anincrease of Tb³⁺ content, both broad Eu²⁺ emission and sharp Eu³⁺ emission increase. The former may be understood by the reduction mechanism due to the charge transfer process from Eu³⁺ to Tb³⁺, whereas the latter is attributed to the energy transfer process from Eu²⁺ to Tb³⁺. Tunable white-light emission resulted from the system of SCS:ETE as a result of the competition between these two processes when the Tb³⁺ concentration varies. It was found that the nominal composition Sr_1.5Ca_0.5SiO₄:1.0%Eu³⁺, 0.07%Tb³⁺ is the optimal composition for single-phased white-light phosphor. The CIE chromaticity calculation demonstrated its potential as white LED-based near-UV chip.     

Sol-gel synthesis, structural and optical properties of rare earth ions (Sm or Dy) activated Ca3Ga2Si3O12 powder phosphors

Structural, morphological and optical properties of rare earth ions (RE³⁺=Sm³⁺ or Dy³⁺) activated Ca₃Ga₂Si₃O₁₂ (CaGaSi) phosphors synthesized by the sol-gel method are reported. XRD results confirmed the cubic phase structure of RE³⁺:CaGaSi phosphors. From the SEM images of RE³⁺:CaGaSi phosphors, it is observed that the particles are agglomerated. Photoluminescence spectra of Sm³⁺:CaGaSi phosphors have shown bright orange red emission at 598 nm (⁴G_5/2→⁶H_7/2) with an excitation wavelength of λ_exci=401 nm. In the case of Dy³⁺:CaGaSi phosphors bright yellow emission has been observed at 574 nm (⁴F_9/2→ ⁶H_13/2) with λ_exci=451 nm. From the PL spectral results, the rare earth ion concentration of CaGaSi phosphors is optimized.     

Enhancement of luminescence intensity and increase of emission lifetime in Eu-doped 3CdO-Al2O3-3SiO2 amorphous system

Intense photoluminescence at room temperature was observed in amorphous cadmium aluminum silicate doped with europium prepared by the sol-gel method. The structure of the 3CdO-Al₂O₃-3SiO₂:Eu³⁺ system (CAS:Eu³⁺) has been determined by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The excitation and the emission spectra indicated that the red characteristic emission (611 nm) of CAS:Eu³⁺ under UV excitation due to ⁵D₀→⁷F₂ electric dipole transition is the strongest. Both XRD data and the emission ratio of (⁵D₀→⁷F₂)/(⁵D₀→⁷F₁) reveal that the Eu³⁺ is in a site without inversion symmetry. The maximum photoluminescence intensity has been obtained for 25 mol% concentration of Eu³⁺ in CAS, and the intensity enhancement and lifetime increase of Eu³⁺ with increasing sintering temperature were observed due to the less OH-content in the samples.     

A potential reddish orange emitting phosphor Ca2BO3Cl:Eu for white light-emitting diodes

A series of phosphors Ca₂BO₃Cl:Eu³⁺ were synthesized by using a high-temperature solid-state reaction technique, and their UV–vis luminescence properties were investigated. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicate that this phosphor can be effectively excited by ultraviolet (394 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J=0, 1, 2) transitions of Eu³⁺. The influence of the doping concentration and charge compensators on the relative emission intensity of Eu³⁺ was investigated, and the optimum doping concentration is 0.04. The critical distance R_c was estimated to be 17.1 Å in terms of the concentration quenching data. The present study suggests that Ca₂BO₃Cl:Eu³⁺ can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Effect of concentration on the luminescence of Eu ions in nanocrystalline La2O3

Nanocrystalline powders with various Eu³⁺ concentration (from 1 to 10 mol %) doped La₂O₃ were prepared via a combustion route. Their structure and morphology were characterized using X-ray diffraction (XRD) and High-resolution transmission electron microscopy. The emission spectra of the as-synthesized samples show that the strongest emission position is centered at 626 nm corresponding to ⁵D₀→⁷F₂ transition of Eu³⁺ ions and the intensity change of 626 nm emission is considered as a function of ultraviolet (240 nm) irradiation time. The excitation spectra at 626 nm monitoring indicate that the charge transfer state band is varies with different Eu³⁺ ion concentration. These results are attributed to the surface defects of the nanocrystals.     

Investigation of crystallographic sites of Eu in La2BaZnO5 by site-selective laser-excitation spectroscopy

La₂BaZnO₅:Eu³⁺ (0.05 mol%) was prepared by a solid-state reaction at high temperature. X-ray powder diffraction analysis confirmed the formation of single phase La₂BaZnO₅. Luminescence properties of La₂BaZnO₅:Eu³⁺ are investigated by site-selective laser-excitation and emission spectroscopy at 18 K. Two different crystallographic sites for Eu³⁺ corresponding to the La³⁺ and Ba²⁺ sites are identified from the ⁷F₀→⁵D₀ excitation spectra obtained by monitoring the ⁵D₀→⁷F_J (J=1, 2, …, 6) emissions. It is found that Eu³⁺ substituted for the Ba²⁺ ion experiences stronger crystal-field strength than Eu³⁺ substituted for the La³⁺ ion. Energy transfer between the two crystallographic Eu³⁺ centers is investigated by luminescence decay curves at 18 K.     

Comparative structural and photoluminescent study of Eu-doped La2O3 and La(OH)3 nanocrystalline powders

Eu³⁺-doped La₂O₃ nanocrystalline powder was prepared by polymer complex solution method and further used for preparation of Eu³⁺-doped La(OH)₃. Structural and optical characterization was carried out by powder X-ray diffraction and photoluminescent spectroscopy. XRD measurements confirmed the formation of hexagonal La₂O₃ and its recrystallization into La(OH)₃ in a humid atmosphere. Excitation spectra show redshift of host lattice and charge transfer emission bands in La(OH)₃ while bands that correspond to Eu³⁺f–f transitions are placed at same wavelengths in both samples. Photoluminescence spectra recorded over the temperature range from 10 K to 300 K show that intensities of emission lines in Eu³⁺-doped La₂O₃ do not depend on temperature as much as in La(OH)₃ sample. Observed dominant ⁵D₀→⁷F₂ and markedly visible ⁵D₀→⁷F₀ emissions in doped La₂O₃ indicate that Eu³⁺ ion is located in a structural site without an inversion center. On the other hand, in Eu³⁺-doped La(OH)₃⁵D₀→⁷F₀ transition is barely visible while ⁵D₀→⁷F₂ is not prominent, and with temperature drop three ⁵D₀→⁷F_J (J=1, 2, 4) transitions become almost of the same intensity. In both La₂O₃ and La(OH)₃ structures Eu³⁺ ion replaces La³⁺ in non-centrosymmetric C_3v and C_3h crystallographic sites, respectively, and difference in symmetry of the crystal field around europium ion is explained by comparing shape and volume of these sites. Decay times of the ⁵D₀- level recorded over the temperature range 10−300 K revealed that emission lifetime values in La₂O₃ (~0.7 ms) are almost two times higher than in La(OH)₃ (~0.4 ms), and unlike in La₂O₃, lifetime in La(OH)₃ is temperature dependent.     

Investigation of 515 nm green-light emission for full color emission LaAlO3 phosphor with varied valence Eu

Photoluminescence and lifetime decay properties of varied valence Eu were employed to investigate the luminescence mechanism of green-light emission positioned at ∼515 nm for full color emission LaAlO₃ phosphor co-doped with Eu²⁺ and Eu³⁺. The enhanced ⁵D₂→⁷F₃ transition emission of Eu³⁺ was assigned for this green emission. Energy transfer between Eu²⁺ and ⁵D₂ level of Eu³⁺ was proposed, which results in the enhancement of ⁵D₂→⁷F₃ transition emission. In addition, energy transfer relations between host-Eu and charge transfer state (CTS)-Eu were also discussed associated with the PLE spectra and band schemes.     

Green emission from Tb-doped SrSi2O2N2 phosphors under ultraviolet light irradiation

Tb-doped SrSi₂O₂N₂ phosphors with promising luminescent properties were synthesized by the conventional solid-state reaction method, characterized by powder X-ray diffraction and studied by photoluminescence excitation and emission spectra. The synthesized materials exhibited a weak blue emission and a strong green emission in the region of 400-470 nm and 480-650 nm, which are attributed to ⁵D₃→⁷F_j (j=5, 4, 3) and ⁵D₄→⁷F_j (j=6, 5, 4, 3) transitions of Tb³⁺, respectively. The green emission from ⁵D₄→⁷F₅ at 543 nm showed the highest intensity under the optimized concentration of 0.1 mol, after which the quenching concentration became relevant. The quenching behavior of the emission of Tb³⁺ was explained by the cross-relaxation of its excited state.     

Emission analysis of Dy and Pr:Bi2O3-ZnF2-B2O3-Li2O-Na2O glasses

In this paper, we present the spectral results of Dy³⁺ and Pr³⁺ (1.0 mol%) ions doped Bi₂O₃-ZnF₂-B₂O₃-Li₂O-Na₂O glasses. Measurements of X-ray diffraction (XRD), differential scanning calorimetry (DSC) profiles of these rare-earth ions doped glasses have been carried out. From the DSC thermograms, glass transition (T_g), crystallization (T_c) and melting (T_m) temperatures have been evaluated. The direct and indirect optical band gaps have been calculated based on the glasses UV absorption spectra. The emission spectrum of Dy³⁺:glass has shown two emission transitions ⁴F_7/2→⁶H_15/2 (482 nm) and ⁴F_7/2→⁶H_13/2 (576 nm) with an excitation at 390 nm wavelength and Pr³⁺:glass has shown a strong emission transition ¹D₂→³H₄ (610 nm) with an excitation at 445 nm. Upon exposure to UV radiation, Dy³⁺ and Pr³⁺ glasses have shown bright yellow and reddish colors, respectively, from their surfaces.     

Luminescence properties of Y2WO6:Eu incorporated with Mo or Bi ions as red phosphors for light-emitting diode applications

In this study, the red phosphors, Y₂W_1−xMo_xO₆:Eu³⁺ and Y₂WO₆:Eu³⁺,Bi³⁺, have been investigated for light-emitting diode (LED) applications. In Y₂WO₆:Eu³⁺, the excitation band edge shifts to longer wavelength with the incorporation of Mo⁶⁺ or Bi³⁺ ions. The emission spectra exhibit ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ ion at 588, 593, and 610 nm, respectively. Moreover, the bluish-green luminescence of the WO₆⁶⁻ at about 460 nm is observed to decrease with the incorporation of Mo⁶⁺, which results in pure red color. Thus, this study shows that the red phosphor, Y₂WO₆:Eu³⁺, incorporated with Mo⁶⁺ or Bi³⁺ ions is advantageous for LEDs applications.     

White-light long-lasting phosphorescence from Tb-activated Y2O2S phosphor

The white-light long-lasting phosphors Y₂O₂S:Tb³⁺, Sr²⁺ or/and Zr⁴⁺ were prepared and studied. The white-light afterglow emission after the irradiation with 254 nm UV are composed of the blue light emission and the yellowish-green light emission, originating from the transitions of ⁵D₃→⁷F₅, ⁵D₄→⁷F₅ in Tb³⁺ when the Tb³⁺ concentration is not higher than 0.3 at%. The codoped Sr²⁺ and Zr⁴⁺ ions act as trap-creating ions. The afterglow can last over 21 min in the dark for Y₂O₂S:Tb³⁺0.3%, Sr²⁺4%, Zr⁴⁺4% after irradiation by 254 nm ultraviolet light. Y₂O₂S:Tb³⁺ may be a promising material for the development of white-light long-lasting phosphor since the Tb³⁺ has a high luminescent efficiency and the dominant excitation band of 4f →5d is located at 220-300 nm.     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Eu activated M6AlP5O20 (M=Sr/Ba/Mg) novel red phosphors

Eu³⁺ activated M₆AlP₅O₂₀ (where M=Sr/Ba/Mg) phosphors prepared by combustion synthesis and the completion of the synthesis was confirm by XRD (X-ray diffraction) patterns. The surface morphology studied by scanning electron microscopy (SEM) and photoluminescence (PL) properties has been reported in this paper. The Eu³⁺ PL emission spectrum was observed in M₆AlP₅O₂₀ phosphors (where M=Sr/Ba/Mg) at 592 (orange) and 618 nm (red) region, the spectrum due to ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions at mercury free excitation, respectively. Its considerable emission intensity under 350 nm excitations makes it possible candidate materials as red component of tricolor luminescence materials and for near ultra violet light emitting diode (n-UVLED) phosphors.     

Growth and optical properties of Yb and Tb codoped BaB2O4 crystals

Optical absorption and luminescence spectra of ytterbium and terbium codoped BaB₂O₄ (β-BBO and α-BBO) crystals grown in different conditions have been studied. Low-temperature absorption peaks were observed in all samples. Features related to rare earth ions were observed in absorption and luminescence spectra. Absorption and emission in the range 860-1000 nm are caused by ²F_5/2↔²F_7/2 transitions in Yb³⁺ ions. Emission peaks at 500, 550, 590 and 630 nm correspond to ⁵D₄→⁷F₆, ⁷F₅, ⁷F₄, and ⁷F₃ transitions of Tb³⁺ ions, respectively. The probable reasons of variations in spectroscopic features related to Yb in BBO host are discussed. It has been shown that the replacement of Ва²⁺ by Yb³⁺ in the lattice of ВаВ₂О₄ results in the decrease in the symmetry of oxygen surrounding of Yb³⁺.     

Synthesis and photoluminescent properties of YVO4:Eu nano-crystal phosphor prepared by Pechini process

A sol-gel technique emphasizing the Pechini process has been employed for the preparation of nano-crystal Eu³⁺-doped YVO₄ phosphor. The precursor powders were heated at 800 °C for 3 h to obtain good crystallinity with better luminescence. XRD results indicate that the second phase is not presented when the Eu³⁺ ion concentration is increased up to 50 mol%. The absorption and photoluminescent (PL) studies indicated that the energy is absorbed first by the host and then transferred to the emitting level of the Eu³⁺ ions. Excitation at 318 nm in terms of Eu³⁺ concentrations in YVO₄ powders shows that the YVO₄ phosphors display bright red luminescence at about 618 nm belonging to the ⁵D₀→⁷F₂ electric dipole transition, and a weak band in the orange region of the ⁵D₀→⁷F₁ transition at 594 nm. In addition, the time-resolved ⁵D₀→⁷F₂ transition presents a single-exponential decay behavior, revealing the decay mechanism of the ⁵D₀→⁷F₂ transition is a single decay component between Eu³⁺ ions only. The saturation of the emission intensity excited by the CTS when the Eu³⁺ concentration is 10 mol%. The concentration quenching is active when the Eu³⁺ concentration is larger than 10 mol%, and the critical distance is about 5.75 Å.