Structural,optical and electrical properties of europium picrate tetraethylene glycol complex as emissive material for OLED

A new europium complex [Eu(Pic)₂(H₂O)(EO4)](Pic)·0.75H₂O was synthesized and used as the emission material for the single layer device structure of ITO/EO4–Eu–Pic/Al, using a spin-coating technique. Study on the optical properties of the [Eu(Pic)₂(H₂O)(EO4)](Pic)·0.75H₂O complex where EO4=tetraethylene glycol and Pic=picrate anion, had to be undertaken before being applicable to the study of an organic light emitting diode (OLED). The electrical property of an OLED using current–voltage (I–V) measurement was also studied. In complex, the Eu(III) ion was coordinated with the EO4 ligand as a pentadentate mode, one water molecule, and with two Pic anions as bidentate and monodentate modes, forming a nine-coordination number. The photoluminescence (PL) spectra of the crystalline complex in the solid state and its thin film showed a hypersensitive peak at 613.5–614.9 nm that assigned to the ⁵D₀→⁷F₂ transition. A narrow band emission from the thin film EO4–Eu–Pic was obtained. The typical semiconductor I–V curve of device ITO/EO4–Eu–Pic/Al showed the threshold and turn on voltages at 1.08 and 4.6 V, respectively. The energy transfer process from the ligand to the Eu(III) ion was discussed by investigating the excitation and PL characteristics. Effect of the picrate anion on the device performance was also studied.     

Structural and luminescence properties of [Ln(ODA)(phen)·4H2O] complexes (Ln=Sm and Dy, ODA=oxydiacetate, phen=1,10-phenanthroline)

Two novel complexes of Sm(III) and Dy(III) with mixed oxydiacetate (ODA) and 1,10-phenanthroline (phen) ligands were synthesized and their structure and luminescence properties were characterized. The complexes of [Ln(ODA)(phen)·4H₂O]Cl·5H₂O [Ln=Sm and Dy] crystallize in the monoclinic space group P2₁/n with Sm: a=12.3401(14) Å, b=16.821(2), c=12.6847(11) Å, β=107.939(10)°, V=2505.0(5) Å³, Z=4 and ρ=1.841 mg/m³, and with Dy: a=12.289(7) Å, b=16.805(6) Å, c=12.705(4) Å, β=108.144(18)°, V=2493.4(19) Å³, Z=4 and ρ=1.786 mg/m³. The complexes of [Sm(ODA)(phen)·4H₂O]⁺ and [Dy(ODA)(phen)·4H₂O]⁺ excited by UV light produce orange red and lightly white emissions, respectively, via the nonradiative energy transfer from phen to the metals. The quantum yield of the sensitized luminescence of [Dy(ODA)(phen)·4H₂O]⁺ (Q=19%) is much greater than that of [Sm(ODA)(phen)·4H₂O]⁺ (Q=1.4%). The luminescence decay times of the complexes were in a few microsecond range and independent of temperature.     

Structural and luminescence studies of trivalent europium complexes with pentaethylene glycol and 18-crown-6 ligands in the presence of picrate anion

Two new isostructural complexes of europium picrate (Eu-Pic) with pentaethylene glycol (EO5) and 18-crown-6 (18C6) ligands formed complexes of molecular formula [Eu(Pic)₂(18C6)]⁺(Pic)⁻I and [Eu(Pic)₂(EO5)]⁺(Pic)⁻II have been isolated and characterised. Compound I showed 10-coordination number through six oxygen atoms from the 18C6 ligand and two bidentate picrate anions. Meanwhile, compound II exhibited 9-coordination number via six oxygen atoms from EO5 ligand, two oxygen atoms from a bidentate and one oxygen atom from monodentate picrate anions. Photoluminescence (PL) spectra of the solid-state europium complexes display sharp lines which are assigned to ⁵D₀→⁷F_0-4 and ⁵D₁→⁷F_1,2,4 transitions. No emission of polyether ligands is observed, indicating that the energy transfer from the polyether ligands to the Eu³⁺ ion is quite efficient. The PL spectra of [Eu(Pic)₂(OH₂)₆]⁺(Pic)⁻·6H₂O III, [Eu(NO₃)₃(OH₂)₃]·(18C6) IV, [Eu(NO₃)₃·6H₂O] V and Eu₂O₃VI are also observed. Compounds I-IV exhibited high Ω₂ intensity parameter values, namely 16.93, 10.23, 17.10 and 12.35 (in units of 10⁻²⁰ cm²), respectively. These relatively high values reflect the hypersensitive behaviour of the ⁵D₀→⁷F₂ transition and indicate that the Eu³⁺ ion is located in a highly polarisable chemical environment.     

Synthesis and electroluminescent properties of a carbozole-functionalized europium(III) complex

A novel europium(III) complex, tris(dibenzoylmethanate){1-[9-hexyl-9H-carbazole]-2-(2-pyridyl)-benzimidazole}europium(III) [Eu(DBM)₃(CAR-PyBM)] functionalized by a carbozole fragment, was synthesized and used as emitting material in organic electroluminescent (EL) devices. Compared with the device based on an unfunctional Eu(III) complex, [Eu(DBM)₃HPyBM] (HPyBM=2-(2-pyridyl)benzimidazole), the EL performances of the device using [Eu(DBM)₃(CAR-PyBM)] as an emitter was significantly enhanced due to the improvement of hole-transporting ability. The maximum efficiency and luminance of red emission achieved from the device with the configuration of ITO/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′diamine (TPD, 50 nm)/ [Eu(DBM)₃(CAR-PyBM)] (30 nm)/1,3,5-tirs-(N-phenylbenzimidazol-2-yl)benzene (TPBI, 20 nm)/LiF (1.5 nm)/Al were 4.2 cd/A and 200 cd/m², respectively.     

High sensitivity ICLAS of H2O in the 12,580-13,550 cm transparency window

High-sensitivity Intracavity Laser Absorption Spectroscopy (ICLAS) is used to measure the high resolution absorption spectrum of H₂¹⁸O between 12,580 and 13,550 cm⁻¹. This spectral region covers the 3v+δ polyad of very weak absorption. Four isotopologues of water (H₂¹⁸O, H₂¹⁶O, H₂¹⁷O, HD¹⁸O) are found to contribute to the observed spectrum. Spectrum analysis is performed with the aid of variational calculations and allowed for assigning 1126 lines belonging to H₂¹⁸O, while only 160 H₂¹⁸O lines are included in the HITRAN-2008 database. Altogether, 823 accurate energy levels of H₂¹⁸O are determined from transitions attributed to 26 upper vibrational states, 438 of them being reported for the first time. New information includes energy levels of four newly observed vibrational states of H₂¹⁸O: (2 4 0), (1 4 1), (0 4 2) and (2 3 1) at 13,167.718, 13,212.678, 13,403.71 and 15,073.975 cm⁻¹, respectively. H₂¹⁸O transitions involving highly excited bending states like (1 6 0), (0 6 1), (0 7 1), (1 7 0), (0 9 0) and even (0 10 0) have been identified as a result of an intensity borrowing from stronger bands via high-order resonance interactions. Thirty-six new energy levels of H₂¹⁷O, present with a 2% relative concentration in our sample, could be determined. The rotational structure of the (0 2 3) state of HD¹⁸O at 13,245.497 cm⁻¹ is also reported for the first time.     

A terbium (III) complex with triphenylamine-functionalized ligand for organic electroluminescent device

A novel ligand, 4-diphenylamino-benzoic acid (HDPAB), and the corresponding Tb (III) complex, Tb (DPAB)₃ which can be dissolved easily in organic solvents were synthesized and characterized. Organic electroluminescent (EL) device with a structure of indium tin oxide (ITO)/poly(N-vinylcarbazole) (PVK): Tb (DPAB)₃ (50 wt%, 80 nm)/1,3,5-tris-(N-phenylbenzimidazol-2-yl)benzene (TPBI) (30 nm)/tri(8-hydroxyquinoline)aluminum (AlQ) (20 nm)/LiF (1 nm)/Al (150 nm) in which Tb (DPAB)₃ acted as an emitter were fabricated. The maximum luminance of 230 cd m⁻² at 20 V and the maximum efficiency of 0.62 cd A⁻¹ were obtained due to the introduction of hole-transporting group, representing the best result to date among Tb (III) carboxylate complexes based EL devices. These results indicate that modifications of rare earth complexes are a promising way to improve the properties of EL devices.     

Molecular dynamics and phase transitions in paramagnetic [Mn(H2O)6][SiF6] investigated by H NMR

The temperature dependences of ²H NMR spectra and spin-lattice relaxation time T₁ have been measured for paramagnetic [Mn(H₂O)₆][SiF₆]. The obtained ²H NMR spectra were simulated by considering the quadrupole interaction and paramagnetic shift. The variation of the spectra measured in phase III was explained by the 180° flip of water molecules. The activation energy E_a and the jumping rate at infinite temperature k₀ for the 180° flip of H₂O were obtained as 35 kJ mol⁻¹ and 4×10¹⁴ s⁻¹, respectively. The spectral change in phases I and II was ascribed to the reorientation of [Mn(H₂O)₆]²⁺ around the C₃ axis where the E_a and k₀ values were estimated as 45 kJ mol⁻¹ and 1×10¹³ s⁻¹, respectively. From the almost temperature independent and short T₁ value, the correlation time for electron-spin flip-flops, τ_e, and the exchange coupling constant J were obtained as 3.0×10⁻¹⁰ s and 2.9×10⁻³ cm⁻¹, respectively. The II-III phase transition can be caused by the onset of the jumping motion of [Mn(H₂O)₆]²⁺ around the C₃ axis.     

Luminescence and crystal field analysis of Eu in Eu[Co(CN)6]·4H2O

The vibrational spectra of Eu[Co(CN)₆]·4H₂O and luminescence spectra of Eu³⁺ in this compound, using 355 nm excitation at temperatures down to 10 K, have been assigned. A clear distinction is made between the n=5 and 4 members of the Ln[M(CN)₆]·nH₂O series from the vibrational spectra. The electronic spectra show prominent vibronic structures, particularly for the ⁵D₀→⁷F₂ sideband. A resonance occurs between the transitions ⁵D₀→⁷F₁(III) and ⁵D₀→⁷F₀+ν(Eu−N). A crystal field analysis of the derived energy data set is presented for Eu³⁺ in eight coordination geometry.     

Synthesis, structure and electroluminescent properties of Schiff-base boron complex with anilido-imine ligand

The Schiff-base ligand boron complex, LBF₂ [L=ortho-C₆H₄(NC₆H₃Me₂-2,6)(CH=NC₆H₃Me₂-2,6)], is synthesized and characterized. The crystal structural study reveals that central boron atom is four coordinate and adopts a distorted tetrahedral geometry in LBF₂. The photo/electroluminescent properties of the boron complex have been studied. The electroluminescent devices were fabricated by doping LBF₂ in polymer blends host of poly(vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazol (PBD) using simple solution spin-coating technique. The single-layer polymer organic light emitter devices exhibited blue-green emission with maximum current efficiency of 1.6 cd/A and maximum luminance of 840 cd/m².     

Rotational spectra of mono-substituted asymmetric C6H6-H2O dimers

This paper reports the assignment of the rotational spectra of the m = 0 and 1 states of ¹³CC₅H₆-H₂O and C₆H₅D-H₂O dimers. The m = 1 progression was not identified or assigned for both ¹³CC₅H₆-H₂O and C₆H₅D-H₂O in the earlier work, though for the symmetric isotopomers (C₆H₆-H₂O/D₂O/H₂¹⁸O), they were identified [H.S. Gutowsky, T. Emilsson, E. Arunan, J. Chem. Phys. 99 (1993) 4883]. The m = 1 transitions for ¹³CC₅H₆-H₂O and C₆H₅D-H₂O were split into two, unlike that of the parent C₆H₆-H₂O isotopomer. The splitting varied, somewhat randomly, with quantum numbers J and K. The m = 0 lines of ¹³CC₅H₆-H₂O had significant overlap with the m = 1 lines of the parent isotopomer, clouding proper assignment, and leading to an rms deviation of about 200 kHz in the earlier work. The general semi-rigid molecular Hamiltonian coupled to an internal rotor, described recently by Duan et al. [Y.B. Duan, H.M. Zhang, K. Takagi, J. Chem. Phys. 104 (1996) 3914], is used in this work to assign both m = 0 and 1 states of ¹³CC₅H₆-H₂O and C₆H₅D-H₂O dimers. Consequently, the m = 0 fits for ¹³CC₅H₆-H₂O/D₂O have an rms deviation of only 4/7 kHz, comparable to experimental uncertainties. The fits for m = 1 transitions for ¹³CC₅H₆-H₂O and C₆H₅D-H₂O dimers have an rms deviation of about 200 kHz. However, it is of the same order of magnitude as that of the m = 1 state of the parent C₆H₆-H₂O dimer. The A rotational constants determined from the m = 0 fits for both ¹³CC₅H₆-H₂O and ¹³CC₅H₆-D₂O isotopomers are identical and very close to the C rotational constant for ¹³CC₅H₆. This provides a direct experimental determination for the C rotational constant of ¹³CC₅H₆, which has a negligible dipole moment.     

White organic electroluminescence from fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc doped with phosphorescent material

Efficient white electroluminescence has been obtained by using an electroluminescent layer comprising of a blue fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc [Zn(hpb)₂] doped with red phosphorescent bis (2-(2′-benzothienyl) pyridinato-N,C^3′)iridium(acetylacetonate) [Ir(btp)₂acac] molecules. The color coordinates of the white emission spectrum was controlled by optimizing the concentration of red dopant in the blue fluorescent emissive layer. Organic light-emitting diodes were fabricated in the configuration ITO/α-NPD/Zn(hpb)₂:0.01 wt%Ir(btp)₂acac/BCP/Alq₃/LiF/Al. The J-V-L characteristic of the device shows a turn on voltage of 5 V. The electroluminescence (EL) spectra of the device cover a wide range of visible region of the electromagnetic spectrum with three peaks around 450, 485 and 610 nm. A maximum white luminance of 3500 cd/m² with CIE coordinates of (x, y=0.34, 0.27) at 15 V has been achieved. The maximum current efficiency and power efficiency of the device was 5.2 cd/A and 1.43 lm/W respectively at 11.5 V.     

A new isomorph of ferrous chloride tetrahydrate: A Fe Mössbauer and X-ray crystallography study

This paper outlines the discovery of a newly characterised isomorph of ferrous chloride tetrahydrate, Fe(H₂O)₆·FeCl₄(H₂O)₂, which was initially identified by X-ray crystallography and confirmed by Mössbauer spectroscopy. The X-ray analysis identified the space group as P2₁/c with essentially the same unit cell dimensions as the well-known isomorph, FeCl₂·4H₂O, except that one edge is doubled due to two discrete [Fe(H₂O)₆]²⁺ and [FeCl₄(H₂O)₂]²⁻ species per unit cell. Time-series Mössbauer studies revealed this new isomorph to be unstable upon atmospheric exposure, decaying to the well-known structure over a period of days. Density functional theory calculations support an energetically favourable catalytic interconversion involving adsorbed water. A high-precision redetermination on the FeCl₂·4H₂O crystal structure, which is also in space group P2₁/c, is also reported, providing the unit cell parameters: a=5.8765(3) Å, b=7.1100(3) Å, c=8.4892(5) Å and β=111.096(1)°.     

A luminescent dinuclear Eu(III) complex based on 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene for light-emitting diodes

A dinuclear Eu (III) complex Eu₂(dbt)₃·4H₂O was synthesized, where H₂dbt was 2,8-bis(4′,4′,4′,-trifluoro-1′,3′-dioxobutyl)-dibenzothiophene. The complex emits the characteristic red luminescence of Eu³⁺ ion due to the ⁵D₀→⁷F_J(J=0-4) transitions under 395 nm-light excitation with a luminescent quantum efficiency of 17%. The complex is thermally stable up to 280 °C. It was found that the complex can be effectively excited by a 395 nm-emitting InGaN chip. Bright red light was obtained using the complex as light color-conversion material.     

Preparation and characterization of ZrO2:Sm amorphous thin films by solid state photochemical deposition method

Thin films of ZrO₂ loaded with 10, 30 and 50 mol% Sm were prepared by a photochemical method using thin films of metal acetylacetonate complexes as precursors. The photolysis of these films induces the fragmentation of the acetylacetonate ligand and the partial reduction of metal ion together with volatile organic compounds. When the metallic complex is exposed to air, the product of the reaction is metal oxide. The photoreactivity of these films was monitored by FT-IR spectroscopy, followed by a post-annealing treatment process. The obtained films were characterized by X-ray photoelectron spectroscopy and atomic force microscopy.Photoluminescense studies of the films employed 400 nm radiation for excitation of the Sm ions present. The emission spectra showed signals arising from the ⁴G_5/2→⁶H_J (J=3/2, 7/2, 9/2) transitions, where the ⁴G_5/2→⁶H_3/2 transition has the highest intensity. The concentration dependence of the PL intensity was also studied. A maximum PL intensity was observed with 10 mol% Sm content but then diminished with higher Sm concentrations.     

Efficient small molecular and polymer organic devices using bis[2-(4-tert-butylphenyl)benzothiazolato-N,C′] iridium (III) (acetylacetonate) dye as emitter

Small molecular organic light-emitting diodes (MOLED) and polymer organic light-emitting diodes (POLED) were fabricated with yellow light emission phosphorescent dye bis[2-(4-tert-butylphenyl)benzothiazolato-N,C²′] iridium (III) (acetylacetonate) doped in different hosts. The electroluminescent (EL) spectra of both devices shown two peaks generated from iridium dye but the position of main peak changed and became broader for POLED. The maximum luminance of 10,500 cd/m² achieved at 12.5 V for MOLED is higher than maximum luminance of 9996 cd/m² at 20 V for POLED. The maximum power efficiency of small molecular device is 6.4 lm/W, which is higher than 2.3 lm/W of polymer device, but the efficiency of both devices will roll off at large current density.     

Structural, vibrational and dielectric properties of new potassium hydrogen sulfate arsenate: K4(SO4)(HSO4)2(H3AsO4)

A new compound, K₄(SO₄)(HSO₄)₂(H₃AsO₄) was synthesized from water solution of KHSO₄/K₃H(SO₄)₂/H₃AsO₄. This compound crystallizes in the triclinic system with space group P1¯ and cell parameters: a=8.9076(2) Å, b=10.1258(2) Å, c=10.6785(3) Å; α=72.5250(14)°, β=66.3990(13)°, γ=65.5159(13)°, V=792.74(3) Å³, Z=2 and ρ_cal=2.466 g cm⁻³. The refinement of 3760 observed reflections (I>2σ(I)) leads to R₁=0.0394 and wR₂=0.0755. The structure is characterized by SO₄²⁻, HSO₄⁻ and H₃AsO₄ tetrahedra connected by hydrogen bridge to form two types of dimer (H(16)S(3)O₄⁻?S(1)O₄²⁻ and H(12)S(2)O₄⁻?H₃AsO₄). These dimers are interconnected along the [1¯ 1 0] direction by the hydrogen bonds O(3)-H(3)?O(6). They are also linked by the hydrogen bridge assured by the hydrogen atoms H(2), H(3) and H(4) of the H₃AsO₄ group to build the chain S(1)O₄?H₃AsO₄ which are parallel to the “a” direction. The potassium cations are coordinated by eight oxygen atoms with K-O distance ranging from 2.678(2) to 3.354(2) Å.Crystals of K₄(SO₄)(HSO₄)₂(H₃AsO₄) undergo one endothermic peak at 436 K. This transition detected by differential scanning calorimetry (DSC) is also analyzed by dielectric and conductivity measurements using the impedance spectroscopy techniques. The obtained results show that this transition is protonic by nature.     

Pressure shift and broadening of 110-101 water vapor lines by atmosphere gases

This paper is devoted to the measurement of pressure shift and broadening parameters of water-vapor lines of the pure rotational transition 1₁₀-1₀₁ in the ground vibrational state of H₂¹⁶O at 556.936 GHz, H₂¹⁷O at 552.02 GHz, H₂¹⁸O at 547.676 GHz, and the vibrationally excited state v₂=1 line of H₂¹⁶O at 658.003 GHz. The broadening coefficients of the line at 556.936 GHz (for N₂ and O₂ as perturbing gases) coincide within the errors with the values obtained recently by Seta et al. [Pressure broadening coefficients of the water vapor lines at 556.936 and 752.033 GHz. JQSRT 2008;109:144-50] by means of a very different technique (THz-TDS). Pressure shift and broadening for other lines were measured for the first time. Comparison of our results with previous measurements and theoretical calculations is presented.     

Synthesis of ultrasmall magnetic iron oxide nanoparticles and study of their colloid and surface chemistry

Colloidal nanoparticles of Fe₃O₄ (4 nm) were synthesized by high-temperature hydrolysis of chelated iron (II) and (III) diethylene glycol alkoxide complexes in a solution of the parent alcohol (H₂DEG) without using capping ligands or surfactants: [Fe(DEG)Cl₂]²⁻+2[Fe(DEG)Cl₃]²⁻+2H₂O+2OH⁻→Fe₃O₄+3H₂DEG+8Cl⁻ The obtained particles were reacted with different small-molecule polydentate ligands, and the resulting adducts were tested for aqueous colloid formation. Both the carboxyl and α-hydroxyl groups of the hydroxyacids are involved in coordination to the nanoparticles’ surface. This coordination provides the major contribution to the stability of the ligand-coated nanoparticles against hydrolysis.     

Efficient red organic light-emitting diode sensitized by a phosphorescent Ir compound

The efficiencies of red organic light-emitting diode (OLED) using tris-(8-hydroxy-quinoline)aluminum (Alq₃) as host and 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) as dopant were greatly increased by adding a small amount (0.3 wt%) of Ir compound, iridium(III) bis(3-(2-benzothiazolyl)-7-(diethylamino)-2H-1-benzopyran-2-onato-N′,C⁴) (acetyl acetonate) (Ir(C6)₂(acac)), as a sensitizer. The device has a sandwiched structure of indium tin oxide (ITO)/4,4′,4″-tris(N-(2-naphthyl)-N-phenyl-amino)triphenylamine (T-NATA) (40 nm)/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′ diamine (NPB) (40 nm)/Alq₃:DCJTB (0.7 wt%):Ir(C6)₂(acac) (0.3 wt%) (40 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (120 nm). It can be seen that the current efficiencies of this device remained almost (13.8±1) cd/A from 0.1 to 20,000 cd/m² and the Commission International d’Eclairage (CIE) coordinates at (0.60, 0.37) in the range of wide brightness. The significant improvement was attributed to the sensitization effect of the doped Ir(C6)₂(acac), thus the energy of singlet and triplet excitons is simultaneously transferred to the DCJTB.     

Preparation and photoluminescent properties of europium complexes with methoxy derivatives of 2′-hydroxy-2-phenylacetophenones

The complexes Eu(L₁)₃·2H₂O (I) [where L₁=2′-hydroxy-4′-methoxy-2-phenylacetophenone], Eu(L₂)₃·2H₂O (II) [where L₂=2′-hydroxy-4′-methoxy-2-(p-methoxyphenyl) acetophenone], Eu(L₃)₃·2H₂O (III) [where L₃=2′-hydroxy-4′, 6′-dimethoxy-2-phenylacetophenone] and Eu(L₄)₃·2H₂O (IV) [where L₄=2′-hydroxy-4′, 6′-dimethoxy -2-(p-methoxyphenyl) acetophenone] were synthesized. Energy dispersive X-ray analysis (EDX) results showed the presence of europium in all the complexes. These complexes were further characterized by infra-red spectroscopy, thermal analysis, scanning electron microscopy (scanning electron microscope) and elemental analysis. The synthesized complexes emit red luminescent with main peak at 612 nm on exposure to UV light at 354 nm. The complexes emitting bright red color might be applicable for optical devices and solid-state lamps for general illumination purposes.