Nonlinear optical absorption and fluorescence of phosphine-substituted bithiophenes in the violet-blue spectral region

The nonlinear optical absorptions of two 5,5′-bis(diphenylphosphino)-2,2′-bithiophene derivatives, Ph₂(X)P(C₄H₂S)₂P(X)Ph₂ (X = O, 1; S, 2), have been investigated by direct transmission measurement with both picosecond and nanosecond laser pulses from 420 nm to 480 nm. Saturated dichloromethane solutions of 1 and 2 exhibit strong nonlinear optical absorptions in this violet-blue spectral region with that of 2 being stronger at all wavelengths. In the picosecond regime, at 420 nm, the transmittance rapidly falls to 50% when the incident fluence is 0.22 J/cm² for 1 and 0.11 J/cm² for 2. Two-photon absorption appears to be the primary mechanism for this nonlinear absorption. The two-photon absorption coefficients β for 1 (2.1 cm/GW) and 2 (4.4 cm/GM) were obtained by fitting the measurement of transmittance as the function of incident beam intensity at 420 nm. These β values are comparable with some of the best results obtained for organic materials in the green, red and infrared spectral region. Both compounds also show fluorescence with an emission peak at 390 nm for 1 and 400 nm for 2. The fluorescence of 1 is considerably stronger than is that of 2. The combination of the wide band gap and strong fluorescence emission of 1 makes it a promising candidate as a host material for blue organic light emitting diodes.     

Synthesis, structure and luminescence properties of zinc (II) complexes with terpyridine derivatives as ligands

Five zinc (II) complexes (1-5) with 4′-phenyl-2,2′:6′,2″-terpyridine (ptpy) derivatives as ligands have been synthesized and fully characterized. The para-position of phenyl in ptpy is substituted by the group (R), i.e. tert-butyl (t-Bu), hexyloxy (OHex), carbazole-9-yl (Cz), naphthalen-1-yl-phenyl-amine-N-yl (NPA) and diphenyl amine-N-yl (DPA), with different electron-donating ability. With increasing donor ability of the R, the emission color of the complexes in film was modulated from violet (392 nm) to reddish orange (604 nm). The photoexcited luminescence exhibits significant solvatochromism because the emission of the complexes involves the intra-ligand charge transfer (ILCT) excited state. The electrochemical investigations show that the complexes with stronger electro-donating substituent have lower oxidation potential and then higher HOMO level. The electroluminescence (EL) properties of these zinc (II) complexes were studied with the device structure of ITO/PEDOT/Zn (II) complex: PBD:PMMA/BCP/AlQ/LiF/Al. Complexes 3, 4 and 5 exhibit EL wavelength at 552, 600 and 609 nm with maximum current efficiency of 5.28, 2.83 and 2.00 cd/A, respectively.     

Photoluminescent properties of heteroleptic cyclometalated platinum(II) complexes bearing 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate as an ancillary ligand

A new series of heteroleptic cyclometalated platinum(II) complexes Pt-1a-f was synthesized, employing 2-arylpyridine (or 1-arylisoquinoline) (HC^∧N-1) and 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dione (HO^∧O-1) for cyclometalation and as ancillary ligands, respectively, and photoluminescent properties were investigated. Focusing on red-shifted phosphorescence, C^∧N ligands containing π-extended aromatics and electron-rich heterocycles were examined. All obtained complexes exhibited photoluminescence at ambient temperature, and the emission maxima ranged from green (λ_PL=518 nm) to far red (λ_PL=708 nm). The large Stokes shifts of more than 100 nm and sub-microsecond or microsecond emission lifetimes revealed that these complexes are phosphorescent emissive. The quantum yield of Pt-1 ranged from 0.02 to 0.59 at ambient temperature and decreased as the emission maximum was red-shifted. In comparison with the reference platinum(II) complexes, Pt-2 bearing an aliphatic ancillary ligand, such as 2,2,6,6-tetramethylheptane-3,5-dionate (O^∧O-2), the ligand O^∧O-1 did not significantly affect the photoluminescence emission maxima, indicating that the energy gap between the singlet ground state and the triplet level was predominantly dependent on the C^∧N ligand.     

Synthesis and luminescent properties of two Schiff-base boron complexes

Schiff bases N,N′-o-phenylenebis (salicylideneimine) (H₂L¹), N,N′-p-phenylenebis (salicylideneimine) (H₂L²) and their corresponding boron complexes (BF₂)₂L¹, (BF₂)₂L² were synthesized, respectively. The two boron complexes have been characterized by ¹H NMR, mass spectrometry and elemental analysis, while the luminescent properties of them were investigated with UV-VIS spectroscopy and photoluminescence spectroscopy. Then the three-layer devices [ITO/NPB (60 nm)/(BF₂)₂L¹ (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device I) and [ITO/NPB (60 nm)/(BF₂)₂L² (50 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm)] (device II) were fabricated by vacuum deposition. These two devices both exhibited blue green emission at 500 nm, but showed different luminances and efficiencies.     

Supramolecular assembly of biphenyl dicarboxylic acid on Au(1 1 1)

We investigate the structure of submonolayer film of 4,4′-biphenyl dicarboxylic acid (BDA) molecules on Au(1 1 1)-22 × √3 reconstructed surface with the use of scanning tunneling microscopy (STM). The BDA molecules form ordered structures on Au(1 1 1) surface which are commensurate with the substrate. We have concluded that the molecule-molecule interaction is mainly through hydrogen bonding formed by a straight dimer of BDA molecules. The straight dimer can be expressed as 4s + 2t or its six crystallographic equivalents using the unit vectors of the gold substrate of s and t. The length of hydrogen bonding (O-H-O) is estimated to be 0.31 nm assuming nearest neighbor distance of gold atoms of 0.275 nm. The ordering shows a clear contrast with the case of BDA on Cu(1 0 0) surface [S. Stepanow, N. Lin, F. Vidal, A. Landa, M. Ruben, J.V. Barth, K. Kern, Nanoletters 5 (2005) 901] in which a square type of ordering of molecules is observed by the formation of hydrogen bonding between a carboxylate (COO) and a benzene ring. The clear difference of the ordered structure on Cu(1 0 0) and Au(1 1 1) surface demonstrates that the absence (presence) of deprotonation of carboxyl group of BDA molecule on Au(1 1 1) (Cu(1 0 0)) switches the straight and square type ordering of BDA molecules.     

Energy, momentum, and force in classical electrodynamics: Application to negative-index media

The classical theory of electromagnetism is based on Maxwell's macroscopic equations, an energy postulate, a momentum postulate, and a generalized form of the Lorentz law of force. These seven postulates constitute the foundation of a complete and consistent theory, thus eliminating the need for physical models of polarization P and magnetization M — these being the distinguishing features of Maxwell's macroscopic equations. In the proposed formulation, P(r, t) and M(r, t) are arbitrary functions of space and time, their physical properties being embedded in the seven postulates of the theory. The postulates are self-consistent, comply with special relativity, and satisfy the laws of conservation of energy, linear momentum, and angular momentum. The Abraham momentum density p_EM(r,t) = E(r,t) × H(r,t) / c² emerges as the universal electromagnetic momentum that does not depend on whether the field is propagating or evanescent, and whether or not the host media are homogeneous, transparent, isotropic, linear, dispersive, magnetic, hysteretic, negative-index, etc. Any variation with time of the total electromagnetic momentum of a closed system results in a force exerted on the material media within the system in accordance with the generalized Lorentz law.     

Synthesis, characterization and optical limiting effect of nickel complexes of multi-sulfur 1,2-dithiolene

Three nickel complexes with a new multi-sulfur 1,2-dithiolene ligand, (n-Bu₄N)[Ni(cddt)₂] 1, (Ph₄P)[Ni(cddt)₂] 2 and [Ni(cddt)₂] 3 (cddt=4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3-dithiolate), have been synthesized and characterized by electrochemical measurements, IR, EPR and UV-Vis-NIR spectroscopies. The crystal structure of complex 2 is determined. Their optical nonlinearities are measured by the Z-scan technique with an 8 ns pulsed laser at 532 nm and all exhibit NLO absorptive abilities. Complexes 1 and 2 both exhibit effective self-defocusing performance (n₂=−5.81×10⁻¹⁰ esu for 1 and −4.51×10⁻¹⁰ esu for 2). The optical limiting (OL) effects were observed with nanosecond and picosecond laser pulses. The OL capability of complex 3 is superior to C₆₀ at the same experimental condition in ns measurements.     

Whence the Minkowski momentum?

Electromagnetic waves carry the Abraham momentum, whose density is given by p_EM = S(r,t) / c². Here S(r,t) = E(r,t) × H(r,t) is the Poynting vector at point r in space and instant t in time, E and H are the local electromagnetic fields, and c is the speed of light in vacuum. The above statement is true irrespective of whether the waves reside in vacuum or within a ponderable medium, which medium may or may not be homogeneous, isotropic, transparent, linear, magnetic, etc. When a light pulse enters an absorbing medium, the force experienced by the medium is only partly due to the absorbed Abraham momentum. This absorbed momentum, of course, is manifested as Lorentz force (while the pulse is being extinguished within the absorber), but not all the Lorentz force experienced by the medium is attributable to the absorbed Abraham momentum. We consider an absorptive/reflective medium having the complex refractive index n₂ + iκ₂, submerged in a transparent dielectric of refractive index n₁, through which light must travel to reach the absorber/reflector. Depending on the impedance-mismatch between the two media, which mismatch is dependent on n₁, n₂, κ₂, either more or less light will be coupled into the absorber/reflector. The dependence of this impedance-mismatch on n₁ is entirely responsible for the appearance of the Minkowski momentum in certain radiation pressure experiments that involve submerged objects.     

Theoretical study on alkyne-linked carbazole polymers for blue-light multifunctional materials

This paper studied poly[(3,6-di-tert-butyl-N-hexadecyl-1,8-carbazolylene) butadiynylene] (P1), butadiynylene-linked poly (3,6-carbazole) (P2) and butadiynylene-linked poly (2,7-carbazole) (P3) through the theoretical measurements with Gaussian 03 program package. To investigate the relationship between structures and properties of these multifunctional electroluminescent materials, their geometrical structures of ground and excited-states were optimized by B3LYP/6-31G (d) and CIS/6-31G (d) methods, respectively. The lowest excitation energies (E_g's), and the maximum absorption and emission wavelengths of these polymers were calculated by time-dependent density functional theory methods (TD-DFT). The important parameters for luminescent materials were also predicated including the ionization potentials (I_p's) and electron affinities (E_a's). The calculated results show that the highest-occupied molecular orbital (HOMO) energies lift about 0.27-0.49 eV compared to N,N′-bis(naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB), suggesting the significant improved hole-accepting and transporting abilities. In addition, substitution of alkyne for carbazole resulted in a narrow band gap and a red shift of both the absorption and emission peaks. Through above calculations, it is evidenced that these polymers can be considered as candidates for excellent OLEDs with good hole-creating abilities and high blue-light emission.     

Synthesis, X-ray structure, EPR and optical properties of a ferrocene substituted polychlorotriphenylmethyl radical

The optical, magnetic and electrochemical properties of the octamethylferrocene aldehyde substituted polychlorotriphenylmethyl radical 1 are reported. Radical 1 is prepared in a three step synthetic route starting with a Wittig-Horner reaction to yield (E)-1-formyl-1′-{2-{4-[bis(2,3,4,5,6-pentachlorophenyl)methyl]-2,3,5,6-tetrachloro phenyl}ethen-1-yl}-2,2′,3,3′,4,4′,5,5′-octamethyl ferrocene (6), which is subsequently deprotonated to yield the corresponding anion 7 and finally oxidized to (E)-4-[2-(1′-formyl-2,2′,3,3′,4,4′,5,5′-octamethylferrocen)ethen-1-yl]-2,3,5,6-tetrachlorophenyl-bis(2,3,4,5,6-pentachlorophenyl)methyl radical (1). Radical 1 exhibits a charge-transfer band transition in the near infrared region which is associated with an intramolecular electron transfer from the ferrocene unit (donor) to the radical unit (acceptor) of this dyad molecule. The X-ray crystal structure of [K⁺(18-crown-6)] (E)-[4-[2-(1′-formyl-2,2′,3,3′,4,4′,5,5′-octamethylferrocen)ethen-1-yl]-2,3,5,6-tetrachlorophenyl-bis(2,3,4,5,6-pentachlorophenyl) methide] (7) has been determined. This organic salt shows an interesting one-dimensional polymeric structure formed by the coordination of the K⁺ cation with several atoms of the organic carbanion.     

Reversible photomagnetism in a cobalt layered compound coupled with photochromic diarylethene

Photomagnetism is one of the most attractive topics in recent research on molecular solids. In order to produce a photo-controllable magnet, we have synthesized a novel organic-inorganic hybrid system coupled with a photochromic diarylethene anion, 2,2′-dimethyl-3,3′-(perfluorocyclopentene-1,2-diyl)bis(benzo[b]thiophene-6-sulfonate) (1a) and cobalt LDHs (layered double hydroxides). Based on the elemental analysis, the title compound, which was synthesized by the anion exchange reaction between Co₂(OH)₃(CH₃COO)·H₂O (2) and 1a, has the chemical composition, Co₄(OH)₇(1a)_0.5·3H₂O (3). Powder X-ray diffraction analysis revealed the interlayer distance of c=27.8 Å. The magnetic susceptibility measurements elucidated the ferromagnetic intra- and inter-layer interactions and the Curie temperature of T_c=9 K. By UV irradiation of 313 nm, 3 shows the photo-isomerization of diarylethene anion from the open form to the closed one in solid state, which leads to the decreases in the coercive field and the remnant magnetization. Furthermore, the photo-excited state is returned to the initial state (open form) almost reversibly by visible irradiation of 550 nm.     

A new quasi-one-dimensional molecular solid based on Ni(mnt)2 anion: Crystal structure and spin-gap transition

A new molecular solid, [1-(4′-bromo-2′-fluorobenzyl)-4-dimetylaminopyridinium]-bis(maleonitriledithiolato)nickel(III), (BrFBzPyN(CH₃)₂(Ni(mnt)₂)(1), has been prepared and characterized by elemental analyses, IR, ESI-MS spectra, single crystal X-ray diffraction and magnetic measurements. Compound 1 crystallizes in the orthorhombic space group Pnma, a=20.579(4) Å, b=7.078(1) Å, c=17.942(4) Å, α=β=γ=90°, V=2613.3(9) Å³, Z=4. The Ni(III) ions of 1 form a quasi-one-dimensional Zigzag magnetic chain within a Ni(mnt)₂⁻ column through Ni?S, S?S, Ni?Ni, or π?π interactions with an Ni?Ni distance of 4.227 Å. Magnetic susceptibility measurements in the temperature range 2-300 K show that 1 exhibits a spin-gap transition around 200 K, and antiferromagnetic interaction in the high-temperature phase (HT) and spin gap in the low-temperature phase (LT). The transition for 1 is second-order phase transition as determined by DSC analyses.     

Correlation between adsorption and thermal properties of lanthanide(III) dinicotinates

Structural and thermal properties of the two isostructural lanthanide metal-organic frameworks: [Er₂(pdc)₃(dmf)₂]·dmf (1) and [Tm₂(pdc)₃(dmf)₂]·dmf (2) where pdc = C₅H₃N(COO)₂²⁻ and dmf = N,N′-dimethylformamide, have been investigated. They are characterized by the BET surface area of 302 and 101 m²/g for 1 and 2, respectively. This paper deals with the influence of activation conditions on sorption properties of the investigated complexes. Thermal investigations of as-made and activated complexes point to their entirely different thermal decompositions.     

Effect of C and SiC additions into in situ or mechanically alloyed MgB2 deformed in Ti sheath

Effect of 3.4 wt.% C and 5 wt.% SiC doping into the standard in situ (IN) process and mechanically alloyed (MA) MgB₂ was studied. Powders of IN and MA process were carried out in air and in argon filled glove box, respectively. Wire samples were prepared by two-axial rolling deformation of IN and MA powders inside the Ti tube. Titanium as sheath material allows to use higher sintering temperatures, we used 700 °C and 800 °C for 30 min in Argon. Critical current densities (J_c) were measured at variable temperatures 4.2 K, 10 K, 15 K and 20 K in the external magnetic fields ranging to 15 T. Critical temperatures, upper critical fields and irreversibility fields of IN and MA with SiC and C additions are compared and discussed. The highest transport properties were observed for wires with MA SiC doped MgB₂ in the whole scale of temperatures 4.2–20 K. Upper critical field was rapidly enhanced in the case of carbon doped MA samples at 4.2 K. MA samples have shown decreased J_c values for higher temperatures (15 K, 20 K), in some case even worse than for the not doped reference IN sample. Carbon substitution and grain connectivity of analyzed samples are compared and discussed. Presented results show that for 20 K applications some new ways (additions) have to be found for increasing the J_c substantially.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

NaCl/Ca/Al as an efficient cathode in organic light-emitting devices

An efficient cathode NaCl/Ca/Al used to improve the performance of organic light-emitting devices (OLEDs) was reported. Standard N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′ biphenyl 4,4′-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq₃) devices with NaCl/Ca/Al cathode showed dramatically enhanced electroluminescent (EL) efficiency. A power efficiency of 4.6 lm/W was obtained for OLEDs with 2 nm of NaCl and 10 nm of Ca, which is much higher than 2.0 lm/W, 3.1 lm/W, 2.1 lm/W and 3.6 lm/W in devices using, respectively, the LiF (1 nm)/Al, LiF (1 nm)/Ca (10 nm)/Al, Ca (10 nm)/Al and NaCl (2 nm)/Al cathodes. The investigation of the electron injection in electron-only devices indicates that the utilization of the NaCl/Ca/Al cathode substantially enhances the electron injection current, which in case of OLEDs leads to the improvement of the brightness and efficiency.     

Nature of electric and magnetic dipoles gleaned from the Poynting theorem and the Lorentz force law of classical electrodynamics

Starting with the most general form of Maxwell's macroscopic equations in which the free charge and free current densities, ρ_free and J_free, as well as the densities of polarization and magnetization, P and M, are arbitrary functions of space and time, we compare and contrast two versions of the Poynting vector, namely, S = μ_o^− 1E × B and S = E × H. Here E is the electric field, H is the magnetic field, B is the magnetic induction, and μ_o is the permeability of free space. We argue that the identification of one or the other of these Poynting vectors with the rate of flow of electromagnetic energy is intimately tied to the nature of magnetic dipoles and the way in which these dipoles exchange energy with the electromagnetic field. In addition, the manifest nature of both electric and magnetic dipoles in their interactions with the electromagnetic field has consequences for the Lorentz law of force. If the conventional identification of magnetic dipoles with Amperian current loops is extended beyond Maxwell's macroscopic equations to the domain where energy, force, torque, momentum, and angular momentum are active participants, it will be shown that “hidden energy” and “hidden momentum” become inescapable consequences of such identification with Amperian current loops. Hidden energy and hidden momentum can be avoided, however, if we adopt S = E × H as the true Poynting vector, and also accept a generalized version of the Lorentz force law. We conclude that the identification of magnetic dipoles with Amperian current loops, while certainly acceptable within the confines of Maxwell's macroscopic equations, is inadequate and leads to complications when considering energy, force, torque, momentum, and angular momentum in electromagnetic systems that involve the interaction of fields and matter.     

Spectroscopic investigation of the interaction between thiourea-zinc complex and serum albumin

The interaction between 1-Zn (N-p-(dimethylamino)benzamido-N′-phenylthiourea-zinc) complex and serum albumins was studied. In the presence of proteins such as BSA or HSA, the fluorescence spectrum of 1 did not change. However, the fluorescence intensity of its zinc complex (1-Zn) was greatly enhanced. It was ascribed to the fact that zinc ion promoted the interaction between 1 and proteins. Therefore, it was concluded that zinc ion could facilitate bioactivity of thiourea derivative drugs. Energy transfer occurred between 1-Zn and the proteins, which led to decrease of proteins’ emission and increase of 1-Zn’s emission. The fluorescence quenching of serum albumins by 1-Zn was considered as a static quenching process. The binding constants between 1-Zn and serum albumins were estimated as 1.02×10¹² mol⁻¹ L for BSA and 1.32×10¹⁰ mol⁻¹ L for HSA, respectively, and the number of binding sites was 2 for both. The effect of 1-Zn on the conformation of serum albumins was further investigated using synchronous fluorescence spectrometry and the results implied that tyrosine residues of proteins were closer to 1-Zn than tryptophan residues.     

Exciplex or electroplex emissions from the interface between aromatic diamine and 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline?

Organic light-emitting diodes (OLEDs) have been fabricated which consist of N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine) (TPD), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP), and tris(8-hydroxyquinoline) aluminum (Alq₃). Four emission peaks located at about 401 nm, 425 nm, 452 nm and 480 nm have been obtained in the electroluminescence (EL) spectra of these devices. The former two emissions originate from the exciton emission of TPD molecular. The last two emissions could be attributed to local (LOC) exiplex emission and charge transfer (CT) exiplex emission at the interface between TPD and BCP layers, respectively.     

Photoconductivity of thin organic films

Thin organic films were deposited on silicon oxide surfaces with golden interdigitated electrodes (interelectrode gap was 2 μm), and the film resistivities were measured in dark and under white light illumination. The compounds selected for the measurements include molecules widely used in solar cell applications, such as polythiophene (PHT), fullerene (C₆₀), pyrelene tetracarboxylic diimide (PTCDI) and copper phthalocyanine (CuPc), as well as molecules potentially interesting for photovoltaic applications, e.g. porphyrin-fullerene dyads. The films were deposited using thermal evaporation (e.g. for C₆₀ and CuPc films), spin coating for PHT, and Langmuir-Schaeffer for the layer-by-layer deposition of porphyrin-fullerene dyads. The most conducting materials in the series are films of PHT and CuPc with resistivities 1.2 × 10³ Ω m and 3 × 10⁴ Ω m, respectively. Under light illumination resistivity of all films decreases, with the strongest light effect observed for PTCDI, for which resistivity decreases by 100 times, from 3.2 × 10⁸ Ω m in dark to 3.1 × 10⁶ Ω m under the light.