A protodesilylation route for 2-Aza-1,3-diene synthesis

A new methodology for 2-aza-1,3-diene synthesis involving protodesilylation reactions of N-1-triethylsilylallyl-imines and their propargyl analogs is described. Synthetic sequences for the preparation of these allyl and propargyl imines starting with propargyl amine are presented. The silylallyl and silylpropargyl imines are transformed to 2-azadiene products by use of CsF induced desilylation via a pathway involving generation and regioselective γ-protonation of intermediate 1-imino-allyl and propargyl anions. Alkylative-desilylation of the silylallyl and propargyl imines leads to generation of N-1-alkylallyl-imines and propargyl analogs via α-alkylation of intermediate anions. Finally, the stereochemistry of azadiene formation has been probed by use of the conversion of N-(1-triethylsilylpropen-1-yl) benzaldimine to 1-phenyl-2-aza-1,3-pentadiene. Solvent, water concentration and a metal cation complexing agent all appear to influence the stereoselectivity of this process.     

Total synthesis of prostaglandin F2alpha using nickel-catalyzed stereoselective cyclization of 1,3-diene and tethered aldehyde via transmetalation of nickelacycle with diisobutylaluminum acetylacetonate

Total synthesis of prostaglandin F2alpha utilizing a nickel(0)-catalyzed cyclization of 1,3-diene and tethered aldehyde was achieved. The cyclization proceeded via a transmetalation of nickelacycle with diisobutylaluminum acetylacetonate (iBu2-ALAC). Thus, the reaction of 19, having a side chain corresponding to the alpha-chain in PGF2alpha with Ni(cod)2 (10 mol %), PPh3 (20 mol %), and 1,3-cyclohexadiene (25 mol %) in the presence of iBu2-ALAC (1.5 eq) proceeded stereoselectively to give the cyclized product 26 in 54% yield. During the cyclization of 19, the Z-olefin at C-5 in the side chain completely retained its geometry, and the four contiguous chiral carbon centers in PGF2alpha were stereoselectively constructed. Transformation of the key intermediate 19 into PGF2alpha was successfully achieved.     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Kinetics and mechanism of the addition of 1,3-butadiene to cyclohexa-1,3-diene in the gas phase

The thermal reactions of 1,3-butadiene (BD) with cyclohexa-1,3-diene (CHD) have been studied in a static system between 437 and 526 K. The pressures of BD and CHD were varied from 61 to 397 torr and from 50 to 93 torr, respectively. The percentages of consumed BD and CHD were always kept lower than 14%. The reactions—in the order of importance—are All the reactions are homogeneous and of the first order with respect to the reagents. Their rate constants (in L/mol·s) are given by A thermochemical analysis of a biradical mechanism is in agreement with these results.     

Kinetics and mechanism for the CH2O + NO2 reaction: A computational study

The reactants, products, and transition states of the CH₂O + NO₂ reaction on the ground electronic potential energy surface have been searched at both B3LYP/6?311+G(d,p) and MPW1PW91/6?311+G(3df,2p) levels of theory. The forward and reverse barriers are further improved by a modified Gaussian‐2 method. The theoretical rate constants for the two most favorable reaction channels 1 and 2 producing CHO + cis‐HONO and CHO + HNO₂, respectively, have been calculated over the temperature range from 200 to 3000 K using the conventional and variational transition‐state theory with quantum‐mechanical tunneling corrections. The former product channel was found to be dominant below 1500 K, above which the latter becomes competitive. The predicted total rate constants for these two product channels can be presented by k_t (T) = 8.35 × 10^?11 T^6.68 exp(?4182/T) cm³/(mol s). The predicted values, which include the significant effect of small curvature tunneling corrections, are in quantitative agreement with the available experimental data throughout the temperature range studied (390–1650 K). © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 184–190, 2003     

A computational study of the kinetics and mechanism for the reaction of HCO with HNO

The mechanism for the reaction of HCO with HNO has been studied at the G2M level of theory, based on the geometric parameters optimized by the BH&HLYP/6‐311G(d, p) method. There are three direct hydrogen abstraction channels producing (1) H₂CO + NO, (2) H₂NO + CO, and (3) HNOH + CO with barriers of 3.7, 3.9, and 10.4 kcal/mol, respectively. Another important reaction channel, (4), involves an association process forming HN(O)CHO (LM1) with a very small barrier and the subsequent isomerization and decomposition of LM1 producing HNOH + CO as major products. The rate constants of the dominant reaction channels (1), (2), and (4) in the temperature range 200–3000 K have been predicted by the microcanonical RRKM and transition state theory calculations with Eckart tunneling corrections. The theoretical result shows that in the high temperature range ( T > 1500 K), k₁ (H₂CO + NO) and k₂(H₂NO + CO) are preponderant, while in the low temperature range, both k₄(LM1) and k₄(HNOH + CO) appear to be dominant at high and low pressures, respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 205–215, 2004     

Thermal gas-phase reaction of perfluorobuta-1,3-diene with NO2

The reaction of NO₂ with perfluorobuta-1,3-diene, CF₂CFCFCF₂ (C₄F₆), has been studied at 312.9, 323.0, 333.4, 396.0 and 418.0 K, using a conventional static system. The products formed in the temperature range 312.9-333.4 K were CF₂CFCF(NO₂)CF₂(NO₂) (I), CF₂(NO₂)CFCFCF₂(NO₂) (II), CF₂CFCF(NO₂)C(O)F (III) and CF₂(NO₂)CFCFC(O)F (IV) and FNO. The formation of these compounds was detected performing infrared and Raman spectra. The infrared spectrum shows a band at 1785 cm⁻¹, characteristic to the terminal -CFCF₂ group and the Raman spectrum shows a band located at 1733 cm⁻¹, corresponding to -CFCF- group. It indicates, that in this temperature range, NO₂ attacks initially only one double bound of CF₂CFCFCF₂. Since the intermediate radical CF₂CFCFCF₂(NO₂) formed in this process is allylic in nature, so there is no isomerization involved in this process, but rather the allylic radical is able to add the second NO₂ either to CF₂ or CFCF₂(NO₂) end, forming the corresponding products. At 396.0 and 418.0 K different products were observed: CF₂(NO₂)CF(NO₂)C(O)F (V), NO, CF₃C(O)F, C(O)F₂ and traces of epoxide of tetrafluoroethene, showing that, at these temperatures, both double bonds are attacked by NO₂ and detachment of CF₂ group is produced. The mechanisms consistent with experimental results in the temperature range 312.9-333.4 and at 396.0 and 418 K are proposed.     

Me3P complexes of p-block Lewis acids SnCl4, SnCl3+ and SnCl2(2+)

Reactions of Me(3)P with SnCl(4) in the presence of nAlCl(3) (n = 0, 1, 2) yields a series of P-Sn complexes illustrating new bonding environments for tin.     

1,3-Dipolar cycloaddition of azomethine ylide with ethene and 2-butene: a computational study

B3LYP/6-311 + G(d,p) has been used to calculate the relative energies and geometrical parameters of the respective reactants, transition states, and cycloadducts from the cycloadditions of azomethine ylide and ethene, (Z)-2-butene, and (E)-2-butene. The half-chair (envelope) transition state structures are consistent with a synchronous concerted cycloaddition mechanism.     

SnCl4-Catalyzed Aza-Acetalization of Aromatic Aldehydes: Synthesis of Aryl Substituted 3,4-Dihydro-2H-1,3-benzoxazines

Stannic tetrachloride was an efficient Lewis acid catalyst for the aza-acetalization of aromatic aldehydes with o-arylaminomethyl phenols, and a series of novel aryl substituted 3,4-dihydro-2H-1,3-benzoxazines were prepared in good yields under mild conditions. SnCl₄ was a more efficient catalyst for the reaction than p-toluenesulfonic acid, sulfuric acid, and aluminium chloride.     

Computational study of reaction pathways in the course of interaction of deactivated silylenes with buta-1,3-diene

The PESs of systems including deactivated silylenes (SiHHal, SiHal₂, Hal = F, Cl, and 2-silaimidazol-2-ylidene, SiN₂H₂C₂H₂) and buta-1,3-diene have been studied using G3(MP2)//B3LYP method. Two major reaction channels, (2 + 1) and (4 + 1) cycloaddition reactions, leading to 2-vinylsiliranes and silacyclopent-3-enes, respectively, as well as [1,3]-sigmatropic rearrangements between 2-vinylsiliranes and the corresponding silacyclopent-3-enes, have been considered in detail. Reactivity of silylenes toward buta-1,3-diene decreases in the following series: SiHHal > SiHal₂ > SiN₂H₂C₂H₂, which is reflected in increase of the reaction barriers for both cycloaddition reactions and in decrease of exothermicity of the formation of the corresponding products. The (4 + 1) cycloaddition is preferable for SiHal₂ and SiN₂H₂C₂H₂ and can compete with (2 + 1) cycloaddition for SiHHal. [1,3]-Sigmatropic rearrangement is important for isomerization of 2-vinylsiliranes to the corresponding silacyclopent-3-enes for all systems studied, except the SiCl₂ system.     

A computational study on the kinetics and mechanism for the unimolecular decomposition of o-nitrotoluene

The kinetics and mechanism for the unimolecular decomposition of o-nitrotoluene (o-CH(3)C(6)H(4)NO(2)) have been studied computationally at the G2M(RCC, MP2)//B3LYP/6-311G(d, p) level of theory in conjunction with rate constant predictions with RRKM and TST calculations. The results of the calculations reveal 10 decomposition channels for o-nitrotoluene and its six isomeric intermediates, among them four channels give major products: CH(3)C(6)H(4) + NO(2), C(6)H(4)C(H)ON (anthranil) + H(2)O, CH(3)C(6)H(4)O (o-methyl phenoxy) + NO, and C(6)H(4)C(H(2))NO + OH. The predicted rate constants in the 500-2000 K temperature range indicate that anthranil production, taking place initially by intramolecular H-abstraction from the CH(3) group by NO(2) followed by five-membered ring formation and dehydration, dominates at temperatures below 1000 K, whereas NO(2) elimination becomes predominant above 1100 K and CH(3)C(6)H(4)O formation by the nitro-nitrite isomerization/decomposition process accounts for only 5-11% of the total product yield in the middle temperature range 800-1300 K. The branching ratio for CH(2)C(6)H(4)NO formation by the decomposition process of CH(2)C(6)H(4)N(O)OH is negligible. The predicted high-pressure-limit rate constants with the rate expression of 4.10 x 10(17) exp[-37000/T] s(-1) for the NO(2) elimination channel and 9.09 x 10(12) exp[-25800/T] s(-1) for the H(2)O elimination channel generally agree reasonably with available experimental data. The predicted high-pressure-limit rate constants for the NO and OH elimination channels are represented as 1.49 x 10(14) exp[-30000/T] and 1.31 x 10(15) exp[-38000/T] s(-1), respectively.     

Exploring the mechanism for the amine-catalyzed isomerization of dimethyl maleate. A computational study

The main objective of this study was to investigate the amine-catalyzed isomerization of dimethyl maleate into dimethyl fumarate in order to utilize the former as a prodrug for the latter. Mechanistic study of this reaction using DFT at B3LYP/6-31G(d,p) level revealed that the reaction is first order in dimethyl maleate, second order in the amine, and overall third order. Moreover, the calculations revealed the existence of a linear correlation between the basicity of the amine catalyst and the isomerization rate.     

Allenes as carbon nucleophiles in intramolecular attack on (pi-1,3-diene)palladium complexes: evidence for trans carbopalladation of the 1,3-diene

Reaction of allene-substituted cyclohexa- and cyclohepta-1,3-dienes with [PdCl(2)(PhCN)(2)] gave eta(3)-(1,2,3)-cyclohexenyl- and eta(3)-(1,2,3)-cycloheptenylpalladium complexes, respectively, in which C-C bond formation between the allene and the 1,3-diene has occurred. Analysis of the (pi-allyl)palladium complexes by NMR spectroscopy, using reporter ligands, shows that the C-C bond formation has occurred by a trans carbopalladation involving nucleophilic attack by the middle carbon atom of the allene on a (pi-diene)palladium(II) complex. The stereochemistry of the (pi-allyl)palladium complexes was confirmed by benzoquinone-induced stereoselective transformations to allylic acetates.     

Gas phase dissociation of H2SO4: A computational study

The decomposition of gaseous sulfuric acid has been investigated computationally. In particular the role of the hydrated gaseous coordination adducts of SO₃(g) and H₂SO₄(g) in the (dissociation + decomposition) process has been evaluated. A first principles study of the gaseous coordination complexes SO₃(H₂O)_n (n = 1 to 3) and H₂SO₄(H₂O)_m (m = 1 to 2) has been carried out deriving equilibrium ground state structures, vibrational frequencies and energetic stabilities by the Moller–Plesset perturbation approximation. These results have been used to derive the enthalpy of formation at 0 K and the Gibbs energy functions of these molecules. A new thermodynamic modeling of the decomposition of H₂SO₄(g) has been therefore performed considering the effect of temperature, pressure and initial composition of the gas (hydration conditions).