Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

Photodecomposition of poly(styrene peroxide)

Photodecomposition of poly(styrene peroxide) (PSP) has been carried out in detail by irradiating (300-360 nm) the PSP solution in CHCl₃ and the products were analyzed by gas chromatography-mass spectrometry (GC-MS) method. In addition to benzaldehyde, α-hydroxy acetophenone and phenyl glycol reported in earlier studies, two new products, viz., α-methoxy acetophenone and α-benzyloxy acetophenone were also observed, the mechanism of their formation discussed. The plausible reasons for the higher percentage of disproportionation products in PSP photolysis compared to that reported in its thermolysis are also discussed.     

Larvicidal and structural studies of some triphenyl- and tricyclohexyltin para-substituted benzoates

Several new triphenyl- and tricyclohexyltin para-substituted benzoates were synthesized. Their structures were characterized by IR and Mössbauer spectroscopies. The structures were determined to be four-coordinated monomers. Larvicidal activities of the new compounds as well as other benzoates were evaluated against the 2nd larval instar of the Anopheles stephensi and Aedes aegypti mosquitoes. Results from the screening studies indicated that the triphenyltin benzoates were more toxic towards the Ae. aegypti larvae. A quantitative-structure activity relationship was also developed for the An. stephensi larvae.     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.     

Vibration and X-ray photoelectron spectroscopies of FeCl3-doped poly(p-diethynylbenzene)

The doping mechanism of poly(p-diethynylbenzene), chemically doped with FeCl₃, was investigated. Absorption, infrared, far infrared, Raman, X-ray photoelectron spectroscopies were used to determine the nature of the dopant in doped polymer. The experimental results suggest that the charge transfer reaction between the polymer chain and the dopant results in the formation of FeCl₄⁻ species, the π electron charge delocalization along the polymeric chain and the reduction of π-π^* transition energy.     

Porosity development in chars from thermal degradation of poly(p-phenylene benzobisoxazole)

The main objective of this work was to investigate porosity development in carbonaceous materials formed by thermal degradation of the high thermal stability polymer, poly(p-phenylene benzobisoxazole) (PBO). Two varieties of PBO, as-spun (AS) and high-modulus (HM) were studied. Chars obtained at various polymer decomposition temperatures (selected on the basis of thermogravimetric and differential thermal analysis results) were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction and CO₂ adsorption at 273 K. The obtained adsorbents essentially contained narrow micropores, and maximum pore development took place at ca. 1000 K, when the polymer was not yet completely decomposed. At higher temperatures, there is a certain pore widening along with a displacement towards smaller pore sizes, and the pore volume significantly decreases.     

Porosity development in chars from thermal decomposition of poly(p-phenylene terephthalamide)

The main objective of this work was to investigate the development of porosity in solid residues from the thermal decomposition of the polymer, poly(p-phenylene terephthalamide) (PPTA). PPTA chars were prepared at different temperatures and characterized by X-ray diffraction and physical adsorption of CO₂ at 0 °C. The carbonization temperatures were selected on the basis of thermogravimetric analysis results. The effect of introducing an isothermal treatment at 500 °C on the characteristics of the resulting chars was also studied. It was found that this pre-treatment lowers the decomposition temperature of PPTA and yields a somewhat less ordered material than in the case of pyrolysis under a constant heating rate. The micropore volume increases with increasing heat treatment temperature for both series of samples. The mean micropore size decreases for the two series of chars until the 700-800 °C interval; above these temperatures, this evolution is reversed. The micropore volume of the samples submitted to the isothermal treatment is higher than when PPTA is treated under a constant heating rate. Likewise, the pore size distribution is more heterogeneous when the intermediate isothermal treatment at 500 °C is introduced during PPTA pyrolysis. Some differences between porosity development in chars from PPTA and other high thermal stability polymers were explained on the basis of different mechanistic features in polymer pyrolysis.     

New confined p-phenylenevinylene (PPV)-type polymer analogue of poly(phenylene sulfide)

A new confined p-phenylenevinylene (PPV)-type polymer (PPVS) has been synthesized using Wittig condensation. The chemical structure of the polymer was well defined by ¹H NMR, ¹³C NMR, and FTIR spectroscopic analysis. PPVS contains oligomeric PPV units separated by sulfide bridges in the main chain; it is fully soluble in common organic solvents and has a number-average molecular weight of 3500 g mol⁻¹. Thermogravimetric analysis and differential scanning calorimetry indicate that PPVS is amorphous, stable up to 360 °C in air and displays a glass transition temperature of 98 °C. The optical properties of the polymer were investigated by UV-visible absorption and photoluminescence spectroscopies. The polymer film absorbs at 375 nm and emits at 517 nm with a narrow emission spectrum. From the cyclic voltammetry analysis, the electrochemical bandgap was estimated to be 2.78 eV. A single-layer diode device of the configuration indium-tin oxide/PPVS/aluminium has been fabricated and has a relatively low turn-on voltage of 3.4 V. An electroluminescent emission similar to photoluminescence is demonstrated in a multilayer device.     

Morphology and structure of poly(p-dioxanone)

The morphology of solution grown single crystals of poly(p-dioxanone) was investigated. Different crystallization conditions (solvent, precipitant agent and temperature) were tested. Dendritic growth, screw dislocations and striations were observed. Crystals usually exhibited a lozenge morphology, whose apex angle changed with the crystallization conditions. In all cases, however, a single crystal electron diffraction pattern was recorded. Spherulitic morphologies were obtained by evaporation of formic acid solutions. Lamellae gave rise to well resolved electron diffraction patterns that allowed determination of the main packing characteristics. Patterns of tilted specimens helped establish an orthorhombic unit cell, whose parameters indicate a deviation from the all trans molecular conformation. Quantum mechanical calculations were performed on small model compounds to study the conformational preferences. Simulated diffraction patterns were consistent with a unit cell containing four repeat units and a P2₁2₁2₁ space group. Molecular packing suggests the existence of different kinds of folds for an assumed adjacent reentry. Polyethylene decoration hardly highlighted a crystal sectorization. Also enzymatic degradation of lamellar crystals was evaluated by using a Pseudomonas cepacia lipase.     

Thermal degradation kinetics of poly(methylvinylsilylene-co-styrene)

Thermal degradation kinetics of poly(methylvinylsilylene-co-styrene) copolymers, viz., PMVSS-I to PMVSS-V obtained by reacting methylvinyldichlorosilane (MVDCS) and styrene in 1:0.25, 1:0.5, 1:1, 1:3 and 1:7 mole ratios under dechlorination conditions, using sodium, was studied by thermogravimetry. The homopolymer, poly(methylvinylsilane) (PMVS), synthesized from MVDCS using sodium was also subjected to the above study for comparative evaluation. The kinetic parameters for thermal degradation, viz., activation energy (E) and pre-exponential factor (A) for the above polymers were estimated by non-isothermal kinetic methods such as Mac Callum-Tanner (M-T), Horowitz-Metzger (H-M), Madhusudhanan-Krishnan-Ninan (MKN) and Coats-Redfern (C-R). The order for thermal degradation of PMVS was found to be almost 0. In the case of the copolymers, the order was 1 for PMVSS-I and 2 for PMVSS-II to PMVSS-V. The observed difference in the order for thermal degradation of PMVSS-I when compared to the other copolymers is attributed to the presence of polysilyl linkages in PMVSS-I. It was found that the activation energy and pre-exponential factor showed an increase in trend with increase in concentration of styrene in the copolymer system.     

The assessment of miscibility and morphology of poly(ε-caprolactone) and poly(para-chlorostyrene) blends

The miscibility and morphology of poly(ε-caprolactone) (PCl) and poly(para-chlorostyrene) (PpClS) blend were investigated by using thermal analysis, morphological analysis, viscometry, and the study of melting point depression. A single glass transition temperature was observed by differential scanning calorimetry (DSC) for PCl/PpClS blends in the whole compositional range (0/100, 25/75, 50/50, 62.5/37.5, 75/25, 90/10). Morphology of the polymers and their blends was studied by scanning electron microscopy (SEM). The Fourier transform infrared spectra of the samples were obtained by spectrometer. Up to 12 cm⁻¹ shifts in carbonyl stretching band of PCl was detected in the spectra of PpClS rich blends. The viscosity of PCl, PpClS and their blends has also been studied to investigate the miscibility according the miscibility criteria Δb, and Δ[η]. Using this data, the interaction parameters α and μ, based on the Chee and Sun et al. approaches were determined. These criteria indicated that the blend is miscible in all proportions up to 90% of PCl content in the blends. The melting point depression of PCl in the blends was examined to obtain the interaction parameter, χ₁₂ for this system. The parameter, χ₁₂ was found to be composition dependent. Negative values of the obtained interaction parameter also support the miscibility of this system up to the 90% PCl in the blend.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

Cross-linked poly(4-vinylpyridine/styrene) copolymers as a support for immobilization of ytterbium triflate

Eight cross-linked poly(4-vinylpyridine/styrene) (P/S) resins (as beads) were prepared by radical suspension polymerization. Ytterbium triflate was immobilized in the range of 0.10-0.24 mmol/g by mixing with the P/S resins. The ytterbium triflate-immobilized P/S resins exhibited good activity in two Lewis acid-catalyzed reactions. Low pyridine containing resins were recycled with no loss of activity, while a slight loss of activity was observed with the higher pyridine containing resins.     

Crystallization and melting behavior of poly(ethylene oxide)/poly(n-butyl methacrylate) blends

The phase diagram, crystallization and melting behavior of poly(ethylene oxide) (PEO)/poly(n-butyl methacrylate) (PnBMA) blends have been investigated using differential scanning calorimetry and optical microscopy. The results show that the blends are miscible up to 85 °C and show an lower critical solution temperature-type demixing at a higher temperature. The isothermal crystallization studies of the blends indicate a reduction in the overall rate of crystallization. Analysis of isothermal crystallization data by means of Avrami equation leads to average values of the Avrami index of 2.5 for pure PEO and 3.0 for the different blend compositions. The melting behavior of the blends reveals double endotherms, which is ascribed to both secondary crystallization and recrystallization. The melting point depression study yielded χ₁₂=0, indicating a relatively low interaction strength.     

Aqueous solution properties of amphiphilic triblock copolymer poly(p-dioxanone-co-l-lactide)-block-poly(ethylene glycol)

A poly(ethylene glycol) (PEG)-based new amphiphilic block copolymer bearing the poly(p-dioxanone-co-l-lactide) (PPDO/PLLA) hydrophobic moieties was prepared. Depending on the copolymer composition and molecular weights, solubility of the polymeric samples in water was varied. Its diluted aqueous solution properties were studied by viscometry, dye solubilization, ¹H-NMR and dynamic light scattering. 1,6-Diphenyl-1,3,5-hexatriene solubilization and ¹H-NMR spectra carried out in CDCl₃ and D₂O were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity and lower negative zeta (ξ) potential of −3 to −14 mV were observed on the aqueous copolymer dispersion.     

Electroactivity, electrochemical stability and electrical conductivity of multilayered films containing poly(3,4-ethylendioxythiophene) and poly(N-methylpyrrole)

Multilayered systems of poly(3,4-ethylendioxythiophene) and poly(N-methylpyrrole) have been prepared using a layer-by-layer electrodeposition technique. The electrochemical and electrical properties of films formed by 3, 5, 7 and 9 layers have been characterized and compared with those of pure polymers and copolymers prepared from mixtures of 3,4-ethylendioxythiophene and N-methylpyrrole with various concentration ratios. Results indicate that the electroactivity and electrical stability of the multilayered systems are higher than those of both poly(3,4-ethylendioxythiophene) and copolymers. Furthermore, these electrochemical properties improve when the number of layers increases. On the other hand, the electrical conductivity of the multilayered systems is slightly lower than that of pure poly(3,4-ethylendioxythiophene), and significantly higher than those of poly(N-methylpyrrole) and copolymers.     

Enhanced sensing of dopamine in the present of ascorbic acid based on graphene/poly(p-aminobenzoic acid) composite film

Graphene/p-aminobenzoic acid composite film modified glassy carbon electrode (Gr/p-ABA/GCE) was first employed for the sensitive determination of dopamine (DA). The electrochemical behavior of DA at the modified electrode was investigated by cyclic voltametry (CV), differential pulse voltametry (DPV) and amperometric curve. The oxidation peak currents of DA increased dramatically at Gr/p-ABA/GCE. The modified electrode was used to electrochemically detect dopamine (DA) in the presence of ascorbic acid (AA). The Gr/p-ABA composite film showed excellent electrocatalytic activity for the oxidation of DA in phosphate buffer solution (pH 6.5). The peak separation between DA and AA was large up to 220 mV. Using DPV technique, the calibration curve for DA determination was obtained in the range of 0.05-10 μM. The detection limit for DA was 20 nM. AA did not interfere with the determination of DA because of the very distinct attractive interaction between DA cations and the negatively Gr/p-ABA composite film. The proposed method exhibited good stability and reproducibility.     

Simultaneous determination of N-acetyl-p-aminophenol and p-aminophenol with poly(3,4-ethylenedioxythiophene) modified glassy carbon electrode

A sensitive and selective method was developed for the determination of N-acetyl-p-aminophenol (APAP) and p-aminophenol (PAP) using poly(3,4-ethylenedioxythiophene) (PEDOT)-modified glassy carbon electrode (GCE). Cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical reaction of APAP and PAP at the modified electrode. Both APAP and PAP showed quasireversible redox reactions with formal potentials of 367 mV and 101 mV (vs. Ag/AgCl), respectively, in phosphate buffer solution of pH 7.0. The significant peak potential difference (266 mV) between APAP and PAP enabled the simultaneous determination both species based on differential pulse voltammetry. The voltammetric responses gave linear ranges of 1.0 × 10⁻⁶-1.0 × 10⁻⁴ mol L⁻¹ and 4.0 × 10⁻⁶-3.2 × 10⁻⁴ mol L⁻¹, with detection limits of 4.0 × 10⁻⁷ mol L⁻¹ and 1.2 × 10⁻⁶ mol L⁻¹ for APAP and PAP, respectively. The method was successfully applied for the determination of APAP and PAP in pharmaceutical formulations and biological samples.     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.