Synthesis and photovoltaic properties of new donor-acceptor benzodithiophene-containing copolymers

Four new alternating narrow band-gap copolymers containing benzodithiophene, 4,8-dithiophen-2-yl-benzo[1,2-c;4,5-c′-bis[1,2,5]thiadiazole, 4,9-bis(thiophen-2-yl)-6,7-di(2-ethylhexyl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline, 5,8-dibromo-2,3-bis(5-octylthiophen-2-yl)quinoxaline, and 4,7-bis(5-bromothiophen-2-yl)benzo[1,2,5] thiadiazole units are synthesized under Stille reaction conditions. The structures, molecular masses, and physical properties of the copolymers are studied via ¹H NMR spectroscopy, GPC, cyclic voltammetry, and thermomechanical and thermogravimetric analyses. The polymers show solubility and a broad absorption region (with the band gap in the range from 0.81 to 1.53 eV). All of the polymers are photostable in air, and their levels of the highest occupied molecular orbital vary from ?4.98 to ?5.30 eV. Polymer solar cells based on these copolymers as donors and fullerene PC₆₀BM as an acceptor show open-circuit voltages in the range 0.16–0.61 V, and the efficiencies of the devices are in the range 0.02–0.49%.     

Synthesis,properties, and field effect transistor characteristics of new thiophene‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐thiophene‐based conjugated polymers

Four new conjugated copolymers based on the moiety of bis(4‐hexylthiophen‐2‐yl)‐6,7‐diheptyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline (BTHTQ) were synthesized and characterized, including poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) (PBTHTQ), poly‐(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo‐[3,4‐g]quinoxaline‐alt‐2,5‐thiophene) (PTTHTQ), poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl) [1,2,5]‐thiadiazolo‐[3,4‐g]quinoxaline‐alt‐9,9‐dioctyl‐2,7‐fluore‐ne) (PFBTHTQ), and poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐alt‐1,4‐bis(decyloxy)phenylene) (PPBTHTQ). The λ_max of PBTHTQ, PTTHTQ, PFBTHTQ, and PPBTHTP thin films was shown at 780, 876, 734, and 710 nm, respectively, with the corresponding optical band gaps (E) of 1.31, 1.05, 1.40, and 1.43 eV. The relatively small band gaps of the synthesized polymers suggested the significance of intramolecular charge transfer between the donor and TQ moiety. The estimated hole mobilities of PBTHTQ, PTTHTQ, and PFBTHTQ‐based field effect transistor devices using CHCl₃ solvent were 8.5 × 10^?5, 8.5 × 10^?4, and 2.8 × 10^?5 cm² V^?1 s^?1, respectively, but significantly enhanced to 1.6 × 10^?4, 3.8 × 10^?3, and 1.5 × 10^?4 cm² V^?1 s^?1 using high boiling point solvent of chlorobenzene (CB). The higher hole mobility of PTTHTQ than the other two copolymers was attributed from its smaller band gap or ordered morphology [wormlike (chloroform) or needle‐like (CB)]. The characteristics of small band gap and high mobility suggest the potential applications of the BTHTQ‐based conjugated copolymers in electronic and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6305–6316, 2008     

Synthesis of new donor-acceptor polymers containing thiadiazoloquinoxaline and pyrazinoquinoxaline moieties: low-band gap, high optical contrast, and almost black colored materials

Two low band gap conjugated polymers, poly[4,9-bis(4-hexylthien-2-yl)-6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline] (PHTTQ) and poly[5,10-bis(4-hexylthien-2-yl)-2,3,7,8-tetra(thien-2-yl)pyrazino[2,3-g]quinoxaline] (PHTPQ), consisting of alternating electron-rich 3-hexylthiophene and electron-deficient 6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline (TTQ) and 2,3,7,8-tetra(thien-2-yl)-2,3-dihydropyrazino[2,3-g]quinoxaline (TPQ) units were synthesized electrochemically. The structures of the π-conjugated monomers were tailored using thiophene as the pendant group on the acceptor units (TTQ and TPQ). The electrochemical and optical properties of the polymers were investigated by cyclic voltammetry and UV-vis-NIR spectroscopy. The absorption spectra of PHTPQ, revealing a 1.0 eV band gap, exhibited three maxima at 352 nm, 535 nm, and 750 nm. Consequently, its absorption spectra cover the region between 400 and 800 nm, which make the polymer almost black in appearance. PHTTQ shows a λ_max value of 820 nm and a band gap of 0.8 eV which is very low among other [1,2,5]thiadiazolo[3,4-g]quinoxaline-containing donor-acceptor type polymers.     

Dinuclear rhenium(I) carbonyl complexes based on π-conjugated polypyridyl ligands with tetrathiafulvalenes: Syntheses, crystal structures, properties and DFT calculations

A series of tetrathiafulvalene-substituted 2,3-di(2-pyridyl)quinoxaline (dpq) ligands, 2-(4,5-bis(methylthio)-1,3-dithiol-2-ylidene)-6,7-di(pyridin-2-yl)- [1,3]dithiolo[4,5-g]quinoxaline (L₁), dimethyl-2-(6,7-di(pyridin-2-yl)-[1,3]dithiolo[4,5-g]quinoxalin-2-ylidene)-1,3-dithiole-4,5-dicarboxylate (L₂), and 2-(5,6-dihydro-[1,3]dithiolo[4,5-b] [1,4]dithiin-2-ylidene)-6,7-di(pyridin-2-yl)-[1,3]dithiolo[4,5-g]quinoxaline (L₃), have been prepared. Reactions of these ligands with Re(CO)₅Cl afford the corresponding dinuclear rhenium(I) carbonyl complexes, Re₂(L)(CO)₆Cl₂ (L = L₁, 5a; L = L₂, 5b; L = L₃, 5c). All new compounds are fully characterized by ¹H NMR, IR and mass spectroscopies. The crystal structures of 5a and 5b have been studied. Optimized conformations and molecular orbital diagrams of 5a−5c have been calculated with density functional theory (DFT). The spin-allowed singlet−singlet electronic transitions of all complexes have been calculated with time-dependent DFT (TDDFT), and the UV-Vis−NIR spectra are discussed based on the theoretical calculations.     

Substituent effect of fluorine atom on benzothiadiazole bridging unit in dye sensitized solar cells

Dye sensitized solar cells performances using two organic dyes with fluorinated-benzothiadiazole spacer, 3-{5-[7-(5-{4-[Bis(9,9-dimethyl-9H-fluoren-2-yl)-amino]-5-fluoro-phenyl}thiophen-2-yl)benzo-[1,2,5]thiadiazol-4-yl]thiophen-2-yl}-2-cyano acrylic acid (JK-311) and 3-{5-[7-(5-{4-[Bis(9,9-dimethyl-9H-fluoren-2-yl)-amino]-5,6-difluorophe-nyl}thiophen-2-yl)benzo-[1,2,5]thiadiazol-4-yl]thiophen-2-yl}-2-cyano acrylic acid (JK-312), were systematically investigated by solar simulation equipment, stepped light-induced transient measurements of photocurrent and voltage, and electrochemical impedance spectroscopy. To investigate substituent effect of fluorine atom on benzothiadiazole, molecular orbital calculations of two dyes using a time dependent density functional theory model with B3LYP/3-31G* were also carried out. JK-312 showed a unique electronic transition from HOMO-1 to LUMO. Short circuit current and open-circuit voltage in DSSCs performances were increased by the introduction of fluorine atom into spacer segment, compared to fluorine-free dyes.     

Decyloxyphenyl-substituted quinoxaline-embedded conjugated electrochromic polymers with high switching stability and fast response speed

Two novel decyloxyphenylquinoxaline-based donor-acceptor(D-A) electroactive monomers bearing dialkoxythiophene as the donor unit are synthesized using Stille coupling reaction. The corresponding polymers, poly[2,3-bis(4-decyloxyphenyl)-5,8-bis(3,4-dimethoxylthiophen-2-yl)quinoxaline](P1) and poly[2,3-bis(4-decyloxyphenyl)-5,8-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)quinoxaline](P2), are directly deposited onto the working electrode surface by electropolymerization. All materials were characterized by nuclear magnetic resonance(NMR), mass spectrometry(MS), scanning electron microscopy(SEM), cyclic voltammetry(CV), ultraviolet-visible absorption spectrometry(UV-Vis) and spectro-electrochemical measurements. Electrochemical studies demonstrate that both polymers are capable of showing both reasonable n- and p-doping processes, and advanced long-term switching stabilities. 3,4-Ethylenedioxythiophene substituted for 3,4-dimethoxythiophene as a donor unit, which enhances the conjugated double-bond character of the conducting polymer, thus leading to a lower electronic band-gap. Likewise, the neutral state color of the synthesized polymer tuned from blue to blue-green corresponding to the red shift of the maximum absorption wavelengths in the visible region. In addition, kinetics study of P1 revealed 42%(595 nm), 30%(839 nm) and 69%(1500 nm) transmittance changes(ΔT%), while P2 exhibited 32%(740 nm), 71%(2000 nm) at the dominant wavelengths. It was also observed that both films could switch quickly between the neutral state and oxidation state, with the response time less than 1 s both in visible and near infrared regions.     

[1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor‐based donor–acceptor–donor‐type polymers: Effect of strength and size of donors on the band gap

Electrochromic polymers based on [1,2,5]thiadiazolo[3,4‐g]quinoxaline acceptor and thiophene, 3,4‐ethylenedioxythiophene and 3,3‐didecyl‐3,4‐proylenedioxythiophene donors, namely poly(6,7‐diphenyl‐4,9‐di(thiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P1 ), poly(4‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)‐9‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐7‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P2 ), and poly(4‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐6‐yl)‐9‐(3,3‐didecyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepin‐8‐yl)‐6,7‐diphenyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) ( P3 ), respectively, were electrochemically and/or chemically synthesized and characterized. Electrochemical and optical properties of the polymers were then investigated. The results, which were obtained electrochemically and optically, indicate that the polymers bearing the same acceptor and different donor units have a band gap range of 0.59–1.24 eV depending on the strength and size of the donor units and band gap determination method. A significant finding in this study was the phenomenon that when the acceptor is physically huge, the general rule that a weak donor would have a high band gap whereas a strong donor would have low band gap can be broken due to the torsional angles/steric hindrances involved with physically large donor molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3483–3493     

1,2,5-Thiadiazole 2-oxides: selective synthesis,structural characterization,and electrochemical properties

A new general procedure for the selective synthesis of 1,2,5-thiadiazole 2-oxides (including fused derivatives) 8a,b,c,g,h from the reaction of vic-glyoximes with S₂Cl₂ and pyridine in acetonitrile was elaborated together with general procedure for the synthesis of 1,2,5-thiadiazoles 7a–i, 10, 12, and 14 from the same starting materials and reagents. Molecular structures of 3,4-dimethyl-1,2,5-thiadiazole 2-oxide 8a and [1,2,5]thiadiazolo[3,4-b]quinoxaline 10 were confirmed by single-crystal X-ray diffraction. Electrochemical properties of 1,2,5-thiadiazole 2-oxides 8 were studied by cyclic voltammetry and different behavior was observed for monocyclic and benzo-fused derivatives. With compounds 8g and 17, previously unknown deoxygenation of 2,1,3-benzothiadiazole 1-oxides was discovered by electrochemical reduction, and resulted 2,1,3-benzothiadiazoles 7g and 19 were detected in the forms of their radical anions by EPR spectroscopy combined with DFT calculations.     

Thiadiazoloquinoxaline and benzodithiophene bearing polymers for electrochromic and organic photovoltaic applications

Abstract

Two novel thiadiazoloquinoxaline and benzodithiophene (BDT) bearing copolymers were designed and synthesized. Different BDT units (alkoxy and thiophene substituted) were used as donor materials and the effect of alkoxy and thiophene substitution on the electrochemical, spectroelectrochemical and photovoltaic properties were investigated. Both polymers exhibited low oxidation potentials at around 0.90 V and low optical band gaps at around 1.00?eV due to the insertion of electron poor thiadiazoloquinoxaline unit into the polymer backbone. Both P1 (poly-6,7-bis(3,4-bis(decyloxy)phenyl)-4-(4,8-bis(nonan-3-yloxy)benzo[1,2-b:4,5-b']dithiophen-2-yl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) and P2 (poly- 4-(4,8-bis(5-(nonan-3-yl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophen-2-yl)-6,7-bis(3,4-bis(decyloxy)phenyl)-[1, 2, 5]thiadiazolo[3,4-g]quinoxaline) exhibited multichromic behavior with different tones of greenish yellow and gray in the neutral and fully oxidized states, respectively. In addition, both polymers revealed very high optical contrasts (～87%) in the NIR region which make these promising polymers good candidates for NIR applications. Finally, in order to explore the organic photovoltaic performances, P1 and P2 were mixed with PC₇₁BM in the active layer of organic solar cells (OSCs) by conventional device structure. As a result P1 and P2 based devices revealed power conversion efficiencies (PCEs) of 0.33% and 0.60% respectively. However, the additive treatment enhanced PCE from 0.49 to 0.73% for P2 based devices.     

New Quinoxaline-Containing Monomers for Narrow-Bandgap Polymers

Two new fused quinoxaline-containing monomers—2,3-bis(9-(2-decyltetradecyl)-9H-carbazol-3-yl)dithieno[3,2-f:2'3'-h]quinoxaline (М1) and 2,5-di(nonadecan-3-yl)bis[1,3]thiazolo[4,5-a:5',4'-c]bisthieno[3,2-h:2',3'-j]phenazine (М2)—have been synthesized in high yields of 88 and 83% as promising building blocks of D-A polymers for photovoltaic applications. The optical bandgaps, found from the absorption edge, are 2.79 and 2.88 eV, respectively. The HOMO/LUMO energies of М1 and М2 are–5.83/–2.96 and–5.83/–2.98 eV, respectively. Both monomers have low-lying HOMO levels, which is favorable for a high open-circuit voltage and a high stability in air in the development of PSCs. The E _g ^ec values of monomers М1 and М2 are 2.87 and 2.85 eV and are consistent well with the optical bandgap (2.79 and 2.88 eV, respectively).     

New monomer based on thienopyrazine with fluorocarbazole substituents as a promising building block for organic electronics

A new monomer, 2,3-bis[6-fluoro-9-(2-octyldodecyl)-9H-carbazol-3-yl]-3,3'-[5,7-di(5-bromothienyl-2)thieno[3,4-b]pyrazine, M1, based on thienopyrazine containing fluorocarbazole substituents in the pyrazine ring has been synthesized. The structure of the compound has been proved by ¹H and ¹³C NMR and elemental analysis. The HOMO and LUMO energies for monomer M1 and its precursor 3 determined by the electrochemical method are–5.03 and–3.31 eV, as well as–5.28 and–3.36 eV, respectively. Band gap widths E _g ^ec are 1.72 and 1.92 eV for compounds M1 and 3, respectively. The new structural fragment has rather deep energy levels of frontier molecular orbitals and a small band gap width; therefore, it is a promising building block for the synthesis of polymers for organic electronics.     

Syntheses,steric hindrance effects,luminescent properties and TD-DFT calculations for a series of copper(I) iodide coordination complexes

A series of copper(I) coordination complexes, CuI(Phen)[2-(Dpp)bp] (1) (Phen?=?phenanthroline, 2-(Dpp)bp?=?2-(Diphenylphosphino)-biphenyl), Cu₂I₂(Phen)[2-(Dpp)bp] (2), CuI(2-PBI)[2-(Dpp)bp] (3) and (2-PBI?=?2-(pyridin-2-yl)-1H-benzo[d]imidazole) and CuI(Bipy)[2-(Dpp)bp] (Bipy?=?2,2′-bipyridine) (4) have been synthesized. X-ray crystal structure studies revealed that complexes 1, 3 and 4 showed mononuclear structures with the copper atoms coordinated by iodide, a chelating nitrogen-donor ligand, and a monodentate phosphine ligand. However, the coordination centers display different distortions of their tetrahedral geometries, according to the steric hindrance of the bulky phosphine ligands. Complex 2 has a dinuclear structure, with trigonal and tetrahedral coordination centers. Variations in the aromatic system of the N-heterocyclic ligands result in different luminescence properties. Thus, the emission maxima for these complexes range from 580 to 642 nm, with lifetimes of τ?=?0.6–0.9 and 1.6–4.2 μs. TD-DFT calculations reveal the origin of the luminescence to be metal–ligand charge transfer, as well as halogen–ligand charge transfer. The optical absorption spectra and thermal stabilities of the complexes have also been studied.     

The chemistry of 1,2,5-thiadiazoles V. Synthesis of 3,4-diamino-1,2,5-thiadiazole and [1,2,5] thiadiazolo[3,4-b]pyrazines

The o-diamine, 3,4-diamino-1,2,5-thiadiazole ( 2 ), was synthesized from 3,4-dichloro-1,2,5-thiadiazole ( 3 ) hy three methods. Aqueous glyoxal cyclized 2 into [1,2,5]thiadiazolo[3,4–6]-pyrazine ( 14 ). 3,4-Dichloro-1,2,5-thiadiazole 1,1-dioxide ( 18 ) reaeted with 2 to give 1,3-dihydro-bis[1,2,5]thiadiazolo[3,4-b:3′,4′-e]pyrazine 2,2-dioxide ( 19 ). The reaction of 2 with selenium oxyehloride led to [1,2,5]selenadiazolo[3,4-c] [1,2,5]thiadiazole ( 12 ). Ring closure of 2,3-diaminoquinoxaline ( 4 ) with thionyl chloride or selenium oxychloride gave [1,2,5]thiadiazolo-[3,4-b]quinoxaline ( 21 ) and [1,2,5]selenadiazolo[3,4-b]quinoxaline ( 22 ), respectively. Sulfurous acid reduced 21 to the 4,9-dihydro derivative 23 , which was reoxidized to 21 with chloranil. Aqueous hase hydrolyzed 21 to 4 via the hydrated intermediate 24 . Aqueous glyoxal cyclized 4 to the covalent hydrate of pyrazino[2,3-b]quinoxaline ( 26 ), 27 , which was dehydrated to 26 . Compound 26 underwent rapid addition of two alcohols in a process analogous to covalent hydration.     

Pure aromatic hydrocarbons with <Emphasis Type="Italic">meta</Emphasis>-linked phenyl-core and perihedral fluorene substitutions with/without inert groups of <Emphasis Type="Italic">tert</Emphasis>-butyl: bipolar hosts for blue phosphorescence

Two pure hydrocarbon molecules of 1,3,5-tris(9-phenyl-9H-fluoren-9-yl)benzene (m TPFB) and 1,3,5-tris(2-tert-butyl-9-phenyl-9H-fluoren-9-yl)benzene (t Bu-m TPFB) were synthesized. Due to the conjugation blocked connection mode and rigid/bulky substitutions, these two materials possess high triplet energy, enabling them as good hosts for blue phosphor in PhOLEDs. By studying their thermal, electrochemical, electronic absorption and photoluminescent properties, it was found that the influence of the inert tert-butyl group on material photoelectrical properties is negligible. For instance, m TPFB and t Bu-m TPFB showed very similar absorption and emission profiles, with almost the same bandgap, triplet energy and energy levels. However, the encapsulation of tert-butyl on the 2-position of 9-phenylfluorene enhanced material thermal stability. Most importantly, carrier transport properties were improved dramatically, as proved by the mono carrier device. Blue phosphorescent OLEDs hosted by t Bu-m TPFB showed external quantum efficiency of 15.2% and current efficiency of 23.0 cd/A, which were much higher than that of the OLEDs based on m TPFB with the analogous structure.     

Synthesis and near infrared electrochromic properties of metallodithiolene complexes

Four metallodithiolene complexes[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?di[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)](3),[4,8-bis(octyloxy)-1,3,5,7-tetrathia]di[1,3-bis(diphenylphosphino)propane?nickel(II)](4),[4,8-bis(octyloxy)-1,3,5,7-tetra-thia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?[1,3-bis(diphenylphosphino)propane·nickel(II)](5)and di[4,8-bis(octyloxy)-1,3,5,7-tetrathia]?[1,1′-bis(diphenylphosphino)ferrocene?palladium(II)]?nickel(II)(6)were synthesized and the near-infrared(NIR)electrochromic properties were studied.The spectroelectrochemical spectra and the electrochromic parameters such as optical contrast,switching time,optical density change,electrochromic efficiency and optical attenuation of complexes 3–6 were investigated in detail.The symmetric binuclear complex 4 showed relatively high electrochromic efficiency of63.0 and 75.4 cm~2/C both in the two oxidation states.The complexes exhibited excellent electroactive/electrochromic stability characterized by chronoamperometry(4000 cyclic switches).     

Polymorphism of bimolecular crystals of CL-20 with tris[1,2,5]oxadiazolo[3,4-<Emphasis Type="Italic">b</Emphasis>:3´,4´-<Emphasis Type="Italic">d</Emphasis>:3″,4″-<Emphasis Type="Italic">f</Emphasis>]azepine-7-amine

New bimolecular crystals (BMCs) of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) with tris[1,2,5]oxadiazolo[3,4-b:3´,4´-d:3″,4″-f]azepine-7-amine (AZ2) were synthesized. Four different crystal structures — two polymorphic modifications with the CL-20: AZ2 ratio of 1: 1 (BMCs 1 and 2) and two polymorphic modifications with the ratio of 1: 2 (BMCs 3 and 4) — were obtained depending on the crystallization conditions. These crystals were studied by X-ray diffraction. The results of quantum chemical calculations indicate that the new η-conformation found in crystal 1 is not a stable conformer of CL-20 and its existence is attributed to the crystal packing effects in structure 1.     

Preparation of 1,1-disubstituted silacyclopentadienes

Several new 1,1-disubstituted siloles containing substituents on the ring carbon atoms have been synthesized. The new siloles: 1,1-dihydrido-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (5), 1,1-dihydrido-2,5-dimethyl-3,4-diphenylsilole (6), 1,1-dimethoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (7), 1,1-bis(4-methoxyphenyl)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (8), 1,1-dipropoxy-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (9), and 1,1-dibromo-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (13) were prepared from reactions originating from the previously reported, 1,1-bis(diethylamino)-2,5-bis(trimethylsilyl)-3,4-diphenylsilole (1) or 1,1-bis(diethylamino)-2,5-dimethyl-3,4-diphenylsilole (2). In addition, three other new organosilane byproducts were observed and isolated during the current study, bis(4-methoxyphenyl)bis(phenylethynyl)silane (11), bis(4-methoxyphenyl)di(propoxy)silane (12) and 1-bromo-4-bromodi(methoxy)silyl-1,4-bis(trimethylsilyl)-3,4-diphenyl-1,3-butadiene (14). Compounds 13 and 14 were characterized by X-ray crystallography and 14 is the first 1,1-dibromosilole whose solid state structure has been determined.     

Synthesis of linear and cyclic compounds containing the 3,4-bis(furazan-3-yl)furoxan fragment

Some chemical transformations of 3,4-bis(4-aminofurazan-3-yl)furoxan (1) and 3,4-bis-(4-nitrofurazan-3-yl)furoxan (2) were considered. Compounds 1 and 2 are valuable synthons for the preparation of linear and cyclic compounds containing the 3,4-bis(furazan-3-yl)furoxan fragment. The reaction of compound 2 with a series of N- and O-nucleophiles afforded novel heterocyclic systems: 7-R-7H-difurazano[3,4-b:3′,4′-f]furoxano[3″,4″-d]azepine and difurazano[3,4-b:3′,4′-f]furoxano[3″,4″-d]oxepin.     

Copper complexes of pyridyl–tetrazole ligands with pendant amide and hydrazide arms: synthesis,characterization, DNA-binding and antioxidant properties

Pyridyl–tetrazole ligands 2-(5-(pyridin-2-yl)-1H-tetrazol-1-yl)acetamide (L1), 2-(5-(pyridin-2-yl)-2H-tetrazol-2-yl)acetamide (L2), 2-(5-(pyridin-2-yl)-1H-tetrazol-1-yl)acetohydrazide (L3) and 2-(5-(pyridin-2-yl)-2H-tetrazol-2-yl)acetohydrazide (L4) have been prepared and coordinated with CuCl₂·2H₂O to furnish the corresponding complexes [Cu(L1) ₂ ]–[Cu(L4) ₂ ]. EPR spectra of the complexes are characteristic of square planar geometries, with nuclear hyperfine spin 3/2. DNA-binding studies using UV–Vis absorption spectroscopy, viscosity and thermal denature studies revealed that all of these complexes are avid binders of calf thymus DNA. The antioxidant properties of the free ligands and the Cu(II) complexes were investigated using the p-nitrosodimethyl aniline hydroxyl radical scavenging method, and [Cu(L4) ₂ ] was found to show the highest activity.     

Novel triazinium-imidothioate zwitterions: intermediates in the reaction of [1,3,4]thiadiazolo[2,3-d][1,2,4]triazolo[1,5-a][1,3,5]triazinium cations with amines

Starting with bis([1,3,4]thiadiazolo)[1,3,5]triazinium halides 1, a novel class of heterocyclic compounds, the [1,3,4]thiadiazolo[2,3-d][1,2,4]triazolo[1,5-a][1,3,5]triazinium halides 5 were prepared. The reaction between 5 and primary or secondary amines 6 yielded highly substituted guanidines 8 and fused tricyclic bis([1,2,4]triazolo)[1,5-a:1′,5′-d][1,3,5]triazinium halides 9. The formation of the reactive triazinium-imidothioate zwitterions 7, which is controlled by the influence of negative hyperconjugation, was proven by NMR data and the X-ray structure of 7c. The subsequent ring-closure/ring-opening steps can be understood in terms of an S_N(ANRORC) process accompanied by intramolecular proton-transfer reactions. The zwitterions 7 were reacted with EtI forming cationic derivatives 10 or hydrolyzed at pH 6-7 to give novel heterocyclic ethanethioamides 11.