3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮的合成

在对甲苯磺酸存在下，采用1,1-二[4-(N,N-二取代氨基)苯基]乙烯(3)和四氯苯酐在乙酸酐溶液中的缩合反应合成了3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮(4)，产率89～93%。3由4,4'-二(N,N-二取代氨基)二苯甲酮(1)与甲基碘化镁进行Grignard反应的产物经水解再脱水制得，产率85%～88.5%(以1为基准)。     

2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二噁唑的合成与发光特性

通过对二苯氨基苯甲醛与2,6-二(4-氯甲基苯基)苯并[1-2,4-5]二唑之间的Wittig-Horner反应,设计并合成了一个2,6-二[4-′(N,N-二苯基氨基)芪]苯并[1-2,4-5]二唑新化合物,目的在于均二苯乙烯分子中同时引入空穴传输和电子传输结构单元,可望提高均二苯乙烯型发光材料的发光强度和光量子效率.采用UV-VisI、R1、HNMR和元素分析等分析方法对合成产物结构进行了确认,并考察了溶剂对其光致发光特性的影响.所合成化合物的相关分析数据表明:1)其分子中的两个均二苯乙烯基均为反式“芪”结构特征;2)随溶剂极性增高,其UV-Vis光谱和荧光光谱的λmax红移;3)可用作蓝色发光材料.     

9,9-二[4-(4-羧基苯氧基)苯基]呫吨的合成

在碘化亚铜、四丁基溴化铵和磷酸钾存在下,9,9-二(4-羟基苯基)呫吨(1)和4-甲基碘苯(2)于N,N-二甲基甲酰胺溶剂中发生Ullmann偶联反应,加热回流反应24 h,以95%的产率合成了中间体--9,9-二[4-(4-甲基苯氧基)苯基]呫吨(3),继而加入催化量的N-溴代丁二酰亚胺并在光照条件下,将中间体3氧化得到一种新型芳香族二羧酸--9,9-二[4-(4-羧基苯氧基)苯基]呫吨(4),其产率为84%,二步反应总收率为79.8%。 目标化合物4经1H NMR、13C NMR、IR和元素分析测试技术确定了其结构。 该法具有原料易得,操作简单,反应条件温和,收率高等优点。     

3-氨基-6/8取代-1H-吡唑[4,3-c]喹啉类化合物的合成

研究了合成3-氨基-6/8取代-1H-吡唑[4,3-c]喹啉类化合物的简易方法.通过3-芳基-4-氨基-5-巯基-1,2,4-三唑与6-/8-取代-4-羟基喹啉羧酸在三氯氧磷催化下的缩合反应及所生成的3-芳基-6-(6-/8-取代-4-氯喹啉-3-基)-1,2,4-三唑[3,4-b]-1,3,4-噻二唑类化合物与水合肼在乙醇中的肼解反应,合成了6个3-氨基-6/8取代-1H-吡唑[4,3-c]喹啉类化合物,并对活泼的氨基进行了初步研究,新化合物通过元素分析,IR,¹HNMR和MS确定结构,并讨论了其波谱性质.     

N-[4-(N′-取代酰胺基)苯基]马来酰亚胺的合成与表征

N-取代马来酰亚胺(RMI)是一类重要的新型树脂改性单体,由于其具有刚性五元环的结构,能显著提高聚合物的玻璃化温度和热分解温度,改善材料的工艺性和力学性能[1-9]。但文献对于在N-取代基团中引入杂环结构的单体合成报道很少。本文报道了由顺丁烯二酸酐、8-氨基喹啉、对甲苯胺为主要原料合成N-[4-(N′-8-喹林基)苯甲酰胺基]马来酰亚胺(QPM)和N-[4-(N′-4-甲基苯基)苯甲酰胺基]马来酰亚胺(TPM)的方法,并对产物进行了元素分析和1H-NMR、FT-IR表征。同时,由于8-氨基喹啉具有与8-羟基喹啉类似的结构,能表现出较好的光学性能[10,11],以N…     

[5C+1N]成环反应：吡啶-4(1H)酮类化合物的一种简便合成方法

用N,N-二甲基丙烯酰基二硫缩烯酮类化合物2与各种脂肪胺类化合物3在N,N-二甲基甲酰胺溶剂中60 ℃条件下,氮乙烯基发生分子内的亲核取代反应,通过[5C+1N]成环反应,合成了系列吡啶-4(1H)酮类化合物4,产率在75%~95%之间。     

6-卤代咪唑并[1,2-a]吡嗪-3-甲酰胺的简便合成

6-卤代咪唑并[1,2-a]吡嗪-3-甲酰胺是一类重要的抗癌新药中间体,广泛应用于淋巴癌、肺癌、皮肤癌等癌症新药的研发。以2-氨基吡嗪为起始原料,与N-卤代丁二酰亚胺发生卤代反应,与N,N-二甲基甲酰胺二甲基缩醛制备亚胺化合物,再和溴乙酸乙酯缩合成环制备6-卤代咪唑并[1,2-a]吡嗪-3-甲酸乙酯,再与氨水氨解共4步反应合成6-卤代咪唑并[1,2-a]吡嗪-3-甲酰胺,总收率为50.7～54.2%。产物结构经IR、~1H NMR、~(13)C NMR、元素分析进行了表征。此合成路线具有原料易得、操作简单、成本低廉、产率较高、避免柱层析分离纯化、更适合工业化放大生产的特点。     

3-烷基/芳基-6-(2′,4′-二氯苯基)-7H-1,2,4-三唑[3,4-b]-1,3,4-噻二嗪的合成及波谱性质

以间二氯苯与氯乙酰氯反应,生成ω-氯代-2,4-二氯苯乙酮(1),再使之分别与3-烷基/芳基-4-氨基-5-巯基-1,2,4-三唑(2a～2l)反应,合成了12种新的3-烷基/芳基-6-(2′,4′-二氯苯基)-7H-1,2,4-三唑并[3,4-b]1,3,4-噻二嗪(4a～4l).利用EA,IR,1H NMR确定了其结构,并提出该反应的可能机制.     

桥连的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]的合成

2-氨基-4-三氟甲基-5-甲基-噻吩-3-羧酸乙酯(1)与三苯基膦、六氯乙烷及三乙胺反应,以84％的产率得到膦亚胺2.在碳酸钾的催化下,膦业胺2与芳基异氰酸酯和双官能亲核试剂的串联氮杂Wittig反应制得新型桥连的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]3,产率为58％～82％.所有产物结构经IR,1HNMR,MS表征和元素分析确证.     

N-丁基-4-[乙基-(3-甲基苯基)氨基]丁酰胺的合成

以γ-丁内酯为起始原料,经开环氯化和酰化反应制得N-丁基-4-氯丁酰胺(2);2与N-乙基间甲苯胺经N-烷基化反应合成了N-丁基-4-[乙基-(3-甲基苯基)氨基]丁酰胺,总收率74.6%,纯度97.6%,其结构经1H NMR和MS(ESI)确证。     

5,10,15,20-中位-四(4-氨基苯基)卟吩合成方法的改进

在还原剂维生素C存在下,将4-氨基苯甲醛与吡咯在丙酸中缩合得到5,10,15,20-中位-四(4-氨基苯基)卟吩,操作简单,产率高于文献方法。     

Synthesis and Crystal Structure of 4,4'-(4-(1-Naphthyl)-4-phenyl-1,3-butadienylidene)-bis[N,N-diethylbenzenamine]

1 INTRODUCTION Organic photo-conductors (OPCs), due to their great advantages over inorganic ones, have been widely used in xerography and holography and aroused considerable interest in the past several de- cades. Recently, almost all OPCs are of a layered structure with a thin charge generation layer (CGL) and a charge transport layer (CTL). Current resear- ches are directed to both improving the chara- cteristics of existing OPCs and developing new ma- terials for future applicati…     

5-(2’-羧乙基)-6-烷基-3,4-二氢吡喃酮的合成

吡喃酮是许多天然产物的结构单元,我们曾由4-异丁酰基庚二酸在过量醋酸酐及乙酰氯存在下回流得到7-氧代-8,8-二甲基-△~9-六氢香豆素.本文由二氰乙基-β-二酮进行酮解水解反应得到4-酰基庚二酸1_(a-c)。 在过量醋酸酐、乙酰氯存在下由1_a、1_c为底物进行反应没有得到双环的香豆素衍生物.其产物和单纯以乙酐为缩合剂时的产物2_a、2_c相同,产率分别为68％、63％。2_c可在硫酸铁催化     

Synthesis and Crystal Structure of 4,4′-(4-(1-Naphthyl)-4-phenyl- 1,3-butadienylidene)-bis[N,N-diethylbenzenamine]

The title compound (C40H42N2) has been synthesized by the reaction of 1-(1-naphthyl)-1-phenyl-3-chloropropylene and bis(4-(diethylamino) phenyl)methanone, and characterized by IR, 1H NMR, MS and X-ray diffraction analysis. The crystal belongs to the monoclinic system, space group P21/c with a = 17.047(3), b = 10.807(2), c = 1&494(4) (A), β = 105.727(4)°, V=3279.4(11) A3, Mr = 550.76, Z = 4, Dc = 1.115 g/cm3, μ(MoKα) = 0.085 mm-1, F(000) = 1184, the final R = 0.0625 and wR = 0.1384 for 2276 observed reflections (I ＞ 2σ(Ⅰ)). X-ray analysis reveals that the butadiene fragment adopts a planar cisiod conformation and makes a dihedral angel of 69.4(2)° with the naphthalene ring.     

Synthesis and Crystal Structure of （2S,5S）-1-Aza-2-（2-pyridyl）-3-oxa-4,4-diphenylbicyclo [3.3.0] Octane

1 INTRODUCTION The catalytic asymmetric synthesis has been a challenging subject in organic synthesis. The deve- lopment of efficient enantioselective catalysts appli- cable to a wide range of carbon-carbon bond form- ing reactions represents a pivotal …     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride and aromatic diamines

Aromatic tetracarboxylic dianhydride having crank and twisted noncoplanar structure, 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 2,2′-dihydroxy-1,1′-binaphthyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). Binaphthyl-2,2′-diyl–containing novel aromatic polyimides having inherent viscosities up to 0.67 dL/g were obtained by the one-step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and pyridine. These aromatic polyimides had glass transition temperatures in the range of 280–350°C, depending on the nature of the diamine moiety. All polymers were stable up to 400°C, with 10% weight loss being recorded above 485°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1937–1943, 1998     

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.     

Synthesis, Crystal Structure and Fluorescent Properties of 1-（4-（Dimethylamino）benzylidene）- 4-（naphthalen- 1-yl） Thiosemicarbazide

1 INTRODUCTION Recently, for the fluorescent properties, Schiff base has been more and more important and widely studied in density optical memories, nonlinear op- tics (NLO), organic light-emitting diodes (OLED), polymer LED and electrogenerated chemilumines- cence (ECL)[1~5]. Thiosemicarbazones are a kind of Schiff bases with thiourea and good ligands easily chelating with transition metal ions. Although they have been studied extensively for a long time due to their chemical and b…