Kinetic and mechanistic investigations of hydrothermal transformations in zinc phosphates

The room-temperature crystallization of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)], an organically templated zinc phosphate containing [Zn(2)(HPO(4))(2)(H(2)PO(4))(4)](4)(-) molecular anions, and its transformation to compounds containing either one- or two-dimensional inorganic components, [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)], [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)], or [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)], under hydrothermal conditions were studied in-situ using energy-dispersive X-ray diffraction. The ability to collect data during reactions in a large volume ( approximately 23 mL) Teflon-lined autoclave under real laboratory conditions has allowed for the elucidation of kinetic and mechanistic information. Kinetic data have been determined by monitoring changes in the integrated peak intensities of Bragg reflections and have been modeled using the Avrami-Erofe'ev expression. The crystallization of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)] is a diffusion-controlled process, while nucleation is increasingly more important in determining the overall rate of the formation of [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)], [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)], and [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)]. The transformation of [C(6)N(2)H(18)][Zn(HPO(4))(H(2)PO(4))(2)] to [C(4)N(2)H(12)][Zn(HPO(4))(2)(H(2)O)] and [C(3)N(2)H(6)][Zn(4)(OH)(PO(4))(3)] occurs via a dissolution-reprecipitation mechanism, while the transformation to [C(6)N(2)H(18)][Zn(3)(H(2)O)(4)(HPO(4))(4)] may be the first observation of a direct topochemical conversion of one organically templated solid to another under hydrothermal conditions.     

Two new cobalt-zinc orthophosphate monohydrates: hydrothermal synthesis, crystal structures and thermal investigation

Two new cobalt zinc orthophosphate hydrates with similar chemical formula, (CoxZn(1-x))3(PO4)2.H2O, but different composition and structure, have been prepared by systematic hydrothermal synthesis from the system nCo(CH3COO)2 : (1 -n)Zn(CH(3)COO)2 : 3.5H3PO4 : 2.1(CH3)2NH(CH2)3NH2:144H2O (0 相似文献   

Novel KF-TiO2catalysts for oxidative dehydrogenation of isobutane

A novel type of catalysts, KF-TiO₂, efficient for the oxidative dehydrogenation (ODH) of isobutane is presented. The effect of KF content and calcination temperature was studied. In the reaction conditions explored, the best performance (73 % selectivity to isobutene at 10.5 % conversion of isobutane) was observed over a catalyst with KF/TiO₂ = 0.2 (mol/mol). The surface properties of the catalysts were investigated by SPS (Surface Photo-voltage Spectroscopy) and XPS. The promotion effect of KF in the catalysts can be attributed to the formation of an oxyfluoro-compound, K₂Ti₄O₈F₂.     

New amine-templated zinc phosphates with a temperature-induced increase of structural dimensionality

Three new amine-templated zinc phosphates, [C4N2H14][Zn(HPO4)2].H2O, AU-I, [C4N2H14][Zn2(H(0.5)PO4)2(H2PO4)], AU-II, and [C4N2H14][Zn5(H2O)(PO4)4], AU-III, are prepared by hydrothermal synthesis using an organic amine, N,N'-dimethylethylendiamine CH3NHCH2CH2NHCH3, as structure-directing agent. The three materials are prepared from the same reaction mixture, 1Zn(CH3CO2)2:3.05H3PO4:2.25CH3NHCH2CH2NHCH3:138H2O (pH = 5.1), AU-I at RT, AU-II at 60 degrees C, and AU-III at 170 degrees C. The materials are built from corner-sharing ZnO4 and PO4 tetrahedra forming chains, layers, or framework structures for AU-I to III, respectively, and are linked together by hydrogen bonds via the diprotonated amine ions. The complete hydrogen-bond scheme is resolved for these new compounds and reveals some interesting phenomena, for example, a hydrogen shared between two phosphate groups in AU-II, thereby forming H(0.5)PO4 groups. Furthermore, the water molecules are different; that is, in AU-I they act as hydrogen-bond donor and acceptor, whereas they act as ligand in AU-III with coordination to Zn. The structures of the compounds are determined by single-crystal X-ray diffraction analysis. AU-I, [C4N2H14][Zn(HPO4)2].H2O, crystallizes in the triclinic space group P-1, a = 8.215(2), b = 8.810(3), c = 8.861(3) A, alpha = 88.001(4) degrees , beta = 89.818(5) degrees , and gamma = 89.773(5) degrees , Z = 2. AU-II, [C4N2H14][Zn2(H(0.5)PO4)2(H2PO4)], is monoclinic, P2/n, a = 11.7877(4), b = 5.2093(2), c = 12.2031(4) A, beta = 98.198(1) degrees , Z = 2. AU-III, [C4N2H14][Zn5(H2O)(PO4)4], crystallizes in the orthorhombic space group Pna2(1) with lattice parameters, a = 20.723(2), b = 5.2095(6), c = 17.874(2) A, Z = 4. The phase stability investigated by systematic hydrothermal synthesis is presented, and the materials are further characterized by 31P solid-state MAS NMR, for example, by determination of 31P chemical shift anisotropies for AU-III, while the thermal behavior is investigated by thermogravimetry (TG).     

Syntheses and characterizations of three low-dimensional chloride-rich zincophosphates assembled about [d-Co(en)(3)](3+) and [dl-Co(en)(3)](3+) complex cations

Three new chloride-rich zincophosphates including two zero-dimensional (0D) clusters [dl-Co(en)3]2[Zn4(H2PO4)2(HPO4)2Cl8] (denoted ZnPO-CJ33) and [d-Co(en)3]2[Zn4(H2PO4)2(HPO4)2Cl8] (denoted ZnPO-CJ34), and one-dimensional (1D) zincophosphate chain [dl-Co(en)3][Zn2(H2PO4)(HPO4)2Cl2] (denoted ZnPO-CJ35) have been solvothermally prepared. ZnPO-CJ33 and ZnPO-CJ34 possess the same cluster structure as the macroanionic [Zn4H6P4O16Cl8]6- unit formed by alternation of ZnOCl3/ZnO3Cl and HPO4/H2PO4 tetrahedra but differ in the countercations. The racemic [dl-Co(en)3]3+ cations are located among the clusters of ZnPO-CJ33, whereas chiral [d-Co(en)3]3+ cations are located among the clusters of ZnPO-CJ34. ZnPO-CJ34 templated by the optically pure chiral [d-Co(en)3]3+ cations is the first chiral monomeric zincophosphate. ZnPO-CJ35 templated by the racemic [dl-Co(en)3]3+ cations possesses a 1D infinite chain structure formed by the alternation of ZnO3Cl and HPO4/H2PO4 tetrahedra. The 1D chain structure of ZnPO-CJ35 can also be viewed as generated from the condensation of 0D clusters of ZnPO-CJ33, with the terminal Cl ions replaced by HPO4 groups. Experimentally, the structural transformation from ZnPO-CJ33 to ZnPO-CJ35 has been investigated.     

Zirconium and hafnium hydrogen monothiophosphates, H2Zr(PO3S)2 and H2Hf(PO3S)2. Syntheses and selective ion-exchange properties of sulfur-containing analogues of H2M(PO4)2 (M = Zr, Hf)

The reactions between aqueous solutions of M4+ (M = Zr, Hf) and PO3S3- each result in the precipitation of a white gel that can be dried to a powder. Elemental analysis results for the white polycrystalline product yield a stoichiometry of H2M(PO3S)2. These new compounds are characterized by thermal analysis (DSC, TG-MS), vibrational spectroscopy (FT-IR, FT-Raman), 31P MAS NMR spectroscopy, energy-dispersive spectroscopy (EDS), and powder X-ray diffraction (XRD). On the basis of the characterizations and the results of trialkylamine intercalation experiments, we conclude that the H2M(PO3S)2 compounds have a layered structure that is likely similar to that of alpha-H2Zr(PO4)2.H2O. The interlayer spacing for both H2M(PO3S)2 compounds, determined by XRD, is approximately 9.4 A. Our characterization results suggest that the sulfur atom of each PO3S3- group is preferentially pointed into the interlayer region of the compound and is protonated. Two of the many potentially interesting properties of H2Zr(PO3S)2, its ion-exchange capacity and selectivity, are investigated. H2Zr(PO3S)2 is demonstrated to be an effective and recyclable ion-exchange material for both Zn2+(aq) and Cd2+(aq). Mass balance experiments indicate that the removal of Cd2+(aq) and Zn2+(aq) ions by solid H2Zr(PO3S)2 occurs by an ion-exchange process. Ion exchange results in the formation of the new compounds H0.2Cd0.9Zr(PO3S)2 and H0.50Zn0.75Zr(PO3S)2. The extraction of metal ions is monitored by XRD, vibrational spectroscopy, and elemental analysis. H2Zr(PO3S)2 reversibly intercalates Zn2+(aq) ions through three complete cycles of intercalation and deintercalation without any loss of ion-exchange capacity.     

Di-tert-butyl phosphate complexes of cobalt(II) and zinc(II) as precursors for ceramic M(PO3)2 and M2P2O7 materials: synthesis, spectral characterization, structural studies, and role of auxiliary ligands

Reaction of the metal acetates M(OAc)2xH2O with di-tert-butyl phosphate (dtbp-H) (3) in a 4:6 molar ratio in methanol or tetrahydrofuran followed by slow evaporation of the solvent results in the formation of metal phosphate clusters [M4(mu 4-O)(dtbp)6] (M = Co (4, blue); Zn (5, colorless)) in nearly quantitative yields. The same reaction, when carried out in the presence of a donor auxiliary ligand such as imidazole (imz) and ethylenediamine (en), results in the formation of octahedral complexes [M(dtbp)2(imz)4] (M = Co (6); Ni (7); Zn (8)) and [Co(dtbp)2-(en)2] (9). The tetrameric clusters 4 and 5 could also be converted into mononuclear 6 and 8; respectively, by treating them with a large excess of imidazole. The use of slightly bulkier auxiliary ligand 3,5-dimethylpyrazole (3,5-dmp) in the reaction between cobalt acetate and 3 results in the isolation of mononuclear tetrahedral complex [Co(dtbp)2(3,5-dmp)2] (10) in nearly quantitative yields. Perfectly air- and moisture-stable samples of 4-10 were characterized with the aid of analytical, thermoanalytical, and spectroscopic techniques. The molecular structures of the monomeric pale-pink compound 6, colorless 8, and deep-blue 10 were further established by single-crystal X-ray diffraction studies. Crystal data for 6: C28H52CoN8O8P2, a = 8.525(1) A, b = 9.331(3) A, c = 12.697(2) A, alpha = 86.40(2) degrees, beta = 88.12(3) degrees, gamma = 67.12(2) degrees, triclinic, P1, Z = 1. Crystal data for 8: C28H52N8O8P2Zn, a = 8.488(1) A, b = 9.333(1) A, c = 12.723(2) A, alpha = 86.55(1) degrees, beta = 88.04(1) degrees, gamma = 67.42(1) degrees, triclinic, P1, Z = 1. Crystal data for 10: C26H52CoN4O8P2, a = b = 18.114(1) A, c = 10.862(1) A, tetragonal, P4(1), Z = 4. The Co2+ ion in 6 is octahedrally coordinated by four imidazole nitrogens which occupy the equatorial positions and oxygens of two phosphate anions on the axial coordination sites. The zinc derivative 8 is isostructural to the cobalt derivative 6. The crystal structure of 10 reveals that the central cobalt atom is tetrahedrally coordinated by two phosphate and two 3,5-dmp ligands. In all structurally characterized monomeric compounds (6, 8, and 10), the dtbp ligand acts as a monodentate, terminal ligand with free P=O phosphoryl groups. Thermal studies indicate that heating the samples at 171 (for 4) or 93 degrees C (for 5) leads to the loss of twelve equivalents of isobutene gas yielding carbon-free [M4(mu 4-O)(O2P(OH)2)6], which undergoes further condensation by water elimination to yield a material of the composition Co4O19P6. This sample of 4 when heated above 500 degrees C contains the crystalline metaphosphate Co(PO3)2 along with amorphous pyrophosphate M2P2O7 in a 2:1 ratio. Similar heat treatment on samples 6-8 results in the exclusive formation of the respective metaphosphates Co(PO3)2, Ni(PO3)2, and Zn(PO3)2; the tetrahedral derivative 10 also cleanly converts into Co(PO3)2 on heating above 600 degrees C.     

含有Zn4O4簇的开放骨架结构磷酸锌的水热合成与表征

在水热体系中,以1,4-丁二胺为模板剂制备了Zn5(PO4)4·H3N(CH2)4NH3单晶,单晶结构分析表明,该化合物属正交晶系,Pnma空间群,晶胞参数a=1.83440(6)nm,b=1.33034(4)nm,c=0.74497(2)nm,β=90°,V=1.81801(9)nm3,Z=4,Dc=2.912Mg·m-3,最终因子R1=0.0309,wR2=0.0804[I>2σ(I)].结构中的锌和磷均与氧形成四面体配位,该化合物中含有Zn4O4簇,Zn4O4簇与PO4四面体相连,形成了篮子状亚结构基元,该亚结构基元通过氧桥以正反交替的方式相互连接成三维开放骨架结构.     

Arylzinc alkoxides: [ArZnOCHPr(i)2]2 and Ar2Zn3(OCHPr(i)2)4 when Ar = C6H5, p-CF3C6H4, 2,4,6-Me3C6H2, and C6F5

From the reactions between diarylzinc compounds (Ar2Zn) and the alcohol (Pr(i)2CHOH) in toluene, the compounds [ArZn(OCHPr(i)2)]2 (Ar = C6H5, C6F5, p-CF3C6H4, and 2,4,6-Me3C6H2) have been isolated and shown to exist in equilibra with the trinuclear complexes Ar2Zn3(OCHPr(i)2)4 and Ar2Zn when Ar = C6H5, C6F5, and p-CF3C6H4. The trinuclear complexes have also been prepared from reactions of the Ar2Zn compounds with the alcohol, which reveals that the ease of Zn-C(aryl) bond cleavage is sensitive to the nature of the Ar group: C6H5 > 4-CF3C6H4 > C6F5. The molecular structures of Ar2Zn3(OCHPr(i)2)4 where Ar = p-CF3C6H4 and C6F5 and [ArZn(OCHPr(i)2)]2 where Ar = C6F5, p-CF3C6H4, and 2,4,6-Me3C6H2 are reported based on single-crystal X-ray diffraction studies. The X-ray structure of Zn(p-CF3C6H4)2 is also reported. The reactivity of these new compounds toward the polymerization of propylene oxide (PO) and the copolymerization of PO and CO2 have been investigated along with related reactions involving the partial hydrolysis of the Ar2Zn and R2Zn compounds, where R = t-Bu, n-Bu, and n-Oct. These results are compared with the previous studies employing Et2Zn as an organozinc precursor.     

Recognition of adenosine monophosphate and H2PO4- using zinc ensemble of new hexaphenylbenzene derivative: potential bioprobe and multichannel keypad system

Zinc ensemble of hexaphenylbenzene derivative 3 exhibits sensitive response toward adenosine monophosphate (AMP) and H(2)PO(4)(-) ions. Further, the application of derivative 3 as a multichannel molecular keypad could be realized in the presence of inputs of Zn(2+) ions, H(2)PO(4)(-) ions, and AMP.     

A novel organic-inorganic hybrid based on an 8-electron-reduced Keggin polymolybdate capped by tetrahedral, trigonal bipyramidal, and octahedral zinc: synthesis and crystal structure of (CH3NH3)(H2bipy)[Zn4(bipy)3(H2O)2MoV8MoVI4O36)(PO4)].4H2O

Hydrothermal reaction of H(3)PO(3), CH(3)NH(2), zinc(II) acetate, 4,4'-bipyridine (bipy), and (NH(4))(6)Mo(7)O(24).4H(2)O at 180 degrees C led to a novel organic-inorganic layered hybrid, [CH(3)NH(3)][H(2)bipy][Zn(4)(bipy)(3)(H(2)O)(2)Mo(V)(8)Mo(VI)O(36)(PO(4))].4H(2)O (1). Its structure was established by single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2(1)/c with cell parameters of a = 17.3032(2), b = 17.8113(3), and c = 23.4597 (4) A, beta = 106.410(1) degrees, V = 6935.6(2) A(3), and Z = 4. The structure of compound 1 features a novel 2D layer built from the 8e-reduced tetracapped Keggin [Zn(4)Mo(12)O(36)(PO(4))](3)(-) anions, which are further interconnected by bridging bipy ligands. The four zinc(II) ions are in tetrahedral, trigonal bipyramidal, and octahedral coordination geometries, respectively.     

Synthesis of a single four-ring (S4R) molecular zinc phosphate and its assembly to an extended polymeric structure: a single-crystal and in-situ MAS NMR investigation

A reaction of ZnO, HCl, H(3)PO(4), and 2-pyridylpiperazine in THF/H(2)O mixture at 75 degrees C for 72 h produces a new zinc phosphate, [(C(5)NH(5))(C(4)N(2)H(10))][Zn(H(2)PO(4))(2)(HPO(4))], I. Zinc phosphate I consists of single four-ring (S4R) units with terminal phosphoryl groups hanging from the Zn center. On reaction with zinc acetate dihydrate in the presence of water at 100 degrees C, I gave another new zinc phosphate, [(C(5)NH(5))(C(4)N(2)H(10))][Zn(2)(H(2)PO(4))(HPO(4))(PO(4))] x 2H(2)O, II. II has a layer structure with apertures formed by 4- and 8-T atoms (T = Zn, P). An examination of the two structures reveals that I and II are related, II being formed by the direct addition of Zn(2+) ions to I. Room-temperature (31)P MAS NMR studies show the presence of different phosphorus species in both compounds. An in-situ (31)P MAS NMR investigation on the formation of II from I in the presence of Zn(2+) ions and water reveals the transformation to be facile. What is noteworthy in this study is that the structural integrity of the S4Rs has been maintained during the formation of II. Donor-acceptor hydrogen bond interactions and pi-pi interactions involving the pyridyl groups also appear to play subtle roles in both phosphates. This study, the first attempt of its kind, combines the principles of supramolecular organic chemistry with inorganic building units and contributes to our understanding of the formation of framework solids.     

Synthesis and characterization of a new bisphosphonic acid and several metal hybrids derivatives

Commercial bis-(4-bromophenyl)-ether, [BrC(6)H(4)](2)-O, has been used to prepare 4-[4'-(diethoxyphosphoryl)phenoxy]phenyl-phosphonic acid diethyl ester, [(CH(3)CH(2))(2)O(3)P-C(6)H(4)](2)-O, (I) following a slight modification of the Michaelis-Arbuzov reaction. The acid hydrolysis of I gave 4-(4'-phosphonophenoxy)phenyl phosphonic acid, [H(2)O(3)P-C(6)H(4)](2)-O (II), and both compounds have been characterized by (1)H NMR and (13)C NMR. The crystal structure of II has been determined by single-crystal X-ray diffraction. II crystallizes in an orthorhombic unit cell, space group Pbcn, with a = 7.822(3) A, b = 5.821(2) A, c = 28.982(9) A, and V = 1319.7(7) A(3). The final R factor was R1 = 0.0614. The structure is layered, being held together through a hydrogen bonding network. II has been used as precursor in the syntheses of new metal (Mn, Fe, Co, Ni, Cu, and Zn) bisphosphonates. The syntheses were carried out using a fixed metal/bisphosphonic acid molar ratio of 2.1:1 and the influence of the pH in the reactions has been studied. Nine new compounds have been isolated: Mn(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).1.5H(2)O (III), Mn(5)(OH)(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3))(2).2H(2)O (IV), Fe(HO(3)PC(6)H(4)OC(6)H(4)PO(3)).0.5H(2)O (V), Co(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).2H(2)O (VI), Ni(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).3H(2)O (VII), Ni(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)).2H(2)O (VIII), Cu(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)) (IX), Zn(2)(O(3)PC(6)H(4)OC(6)H(4)PO(3)) (X), and Zn(HO(3)PC(6)H(4)OC(6)H(4)PO(3)H) (XI). Compound IX crystallizes in an orthorhombic unit cell, space group Pbcn, and unit cell parameters a = 8.1012(5) A, b = 5.3109(3) A, c = 29.2595(5) A, and V = 1258.8(1) A(3). Its structure has been solved by ab initio powder diffraction and refined by the Rietveld method to R(F) = 0.042. IX has a pillared layer framework with highly distorted CuO(5) groups sharing edges to give isolated dimers. XI was indexed in a monoclinic unit cell, space group P112(1), with parameters a = 9.4991(9) A, b = 5.0445(5) A, c = 29.131(2) A, gamma = 91.945(7) degrees, and V = 1395.1(3) A(3). Its structure has been refined by the Rietveld method, R(F) = 0.054, since it is isostructural with the known compound, Zn[HO(3)P(C(6)H(4))(2)PO(3)H]. All solids were also characterized by thermal analysis and IR and UV-Vis spectroscopies.     

One- and two-dimensional silver and zinc uranyl phosphates containing bipyridyl ligands

The reaction of AgCN with UO2, 4,4'-bipy, and phosphoric acid in water at 160 degrees C under autogeneously generated pressure results in the formation of [Ag(4,4'-bipy)]2[(UO2)2H3(PO4)3] (AgUP-1). Ag(2,2'-bipy)(UO2)2(HPO4)(PO4) (AgUP-2) has been prepared from the hydrothermal reaction (at 180 degrees C) of KAg(CN)2 with UO2(C2H3O2)2.2H2O and 2,2'-bipy. [Zn(2,2'-bipy)]2[UO2(HPO4)3] (ZnUP-1) was isolated from the hydrothermal reaction of UO2, 2,2'-bipyridyl, Zn(CN)2, and H3PO4. Single crystal X-ray diffraction experiments reveal that the structure of AgUP-1 consists of 2infinity[(UO2)2H3(PO4)3]2- expanded autunite-like layers in the [ac] plane, separated by 1infinity[Ag(4,4'-bipy)]+ chains of two-coordinate Ag+ bridged by 4,4'-bipy. The structure of AgUP-2 is composed of chains of edge-sharing UO7 pentagonal bipyramids that are linked by phosphate anions into 2infinity[(UO2)2(HPO4)(PO4)]1- sheets with the beta-uranophane topology that extend in the [ab] plane. Both sides of the sheets are decorated by [Ag(2,2'-bipy)]+ units, where the Ag+ cations are found in distorted trigonal planar environments. The structure of ZnUP-1 is 1D and consists of UO7 pentagonal bipyramids that are connected by phosphate anions that also bind four-coordinate zinc(II) to the periphery of the chains and five-coordinate zinc within the chains. Intense fluorescence from these compounds was observed.     

Ratiometric fluorescent receptors for both Zn2+ and H2PO4(-) ions based on a pyrenyl-linked triazole-modified homooxacalix[3]arene: a potential molecular traffic signal with an R-S latch logic circuit

A ratiometric fluorescent receptor with a C(3) symmetric structure based on a pyrene-linked triazole-modified homooxacalix[3]arene (L) was synthesized and characterized. This system exhibited an interesting ratiometric detection signal output for targeting cations and anions through switching the excimer emission of pyrene from the "on-off" to the "off-on" type in neutral solution. (1)H NMR titration results suggested that the Zn(2+) center of receptor L·Zn(2+) provided an excellent pathway of organizing anion binding groups for optimal host-guest interactions. It is thus believed that this receptor has potential application in sensing, detection, and recognition of both Zn(2+) and H(2)PO(4)(-) ions with different optical signals. In addition, the fluorescence emission changes by the inputs of Zn(2+) and H(2)PO(4)(-) ions can be viewed as a combinational R-S latch logic circuit at the molecular level.     

Molecular zinc phosphonates: synthesis and X-ray crystal structures of [[(ZnMe)4(THF)2][tBuPO3]2] and [[(ZnEt)3(Zn(THF))3][tBuPO3]4[mu3-OEt]

The reactions of zinc alkyls with tert-butylphosphonic acid in 2 : 1 and 1 : 1 molar ratios afforded [[(ZnMe)(4-)(THF)2][tBuPO3]2] (2) and [[(ZnEt)3(Zn(THF))3][tBuPO3]4[mu3-OEt]] (3), respectively. Compounds 2 and 3 have been fully characterised by means of spectroscopic and analytical methods. Single-crystal X-ray diffraction studies revealed that zinc phosphonates 2 and 3 are tetra- and hexa-nuclear, respectively. This is in contrast to the dodecanuclear zinc phosphonate [[Zn2(THF)2(ZnEt)6Zn4(mu4-O)][(tBuPO3)8]] (1) obtained in a 1.5 : 1 reaction between zinc alkyls and tBuP(O)(OH)2.     

Zinc and cadmium 2-pyrazinephosphonates: syntheses, structures and luminescent properties

Three new metal(II) 2-pyrazinephosphonates have been synthesized by hydrothermal reactions based on 2-pyrazinephosphonic acid (C(4)H(3)N(2)PO(3)H(2)1) as ligand, namely, Zn(C(4)H(3)N(2)PO(3)) (2), Cd[(C(4)H(3)N(2)PO(3))(H(2)O)] (3) and Cd[(C(4)H(3)N(2)PO(3)H)Cl]·H(2)O (4). In compound 2, the O-P-O bridged inorganic layers are pillared by pyrazinyl groups into a three-dimensional network. In compound 3, the {CdO(5)N} and {CPO(3)} polyhedra are interconnected via edge and corner-sharing into a metal phosphonate layer. In compound 4, the {Cd(2)Cl(2)} dimers are linked by O-P-O bridges into a one-dimensional double chain, and the chains are joined into a layer by pyrazinyl groups. Here we employ pyrazinephosphonic acids as structure directing motifs to form extended structures and materials with interesting luminescent properties. The luminescent properties studied have also been described.     

Molecular dynamics simulation of ferronanofluid behavior in a nanochannel in the presence of constant and time-dependent magnetic fields

Journal of Thermal Analysis and Calorimetry - For the first time, double phosphates(V) Zn3Cr4(PO4)6 and Mg3Cr4(PO4)6 were synthesized by non-waste solid-state reaction, performed in the temperature...     

Vibrational spectroscopic study of the mineral tsumebite Pb2Cu(PO4,SO4)(OH)

The mineral tsumebite Pb2Cu(PO4)(SO4)(OH), a copper phosphate-sulfate hydroxide of the brackebuschite group has been characterised by Raman and infrared spectroscopy. The brackebuschite mineral group are a series of monoclinic arsenates, phosphates and vanadates of the general formula A2B(XO4)(OH,H2O), where A may be Ba, Ca, Pb, Sr, while B may be Al, Cu2+,Fe2+, Fe3+, Mn2+, Mn3+, Zn and XO4 may be AsO4, PO4, SO4,VO4. Bands are assigned to the stretching and bending modes of PO4(3-) and HOPO3 units. Hydrogen bond distances are calculated based upon the position of the OH stretching vibrations and range from 2.759 ? to 3.205 ?. This range of hydrogen bonding contributes to the stability of the mineral.     

Ni-P-Zn_3(PO_4)_2(ZnSnO_3、ZnSiO_3)纳米复合化学镀层性质和组成的研究

研究了温度、时间、浓度等对 A3钢片上 Ni-P-Zn3(PO4)2、 Ni-P-ZnSnO3和 Ni-P-ZnSiO3纳米复合化学镀层外貌的影响。用扫描电子显微镜（ SEM）观察外貌;称重法测定厚度;通过 10％ NaCl溶液、 1％ H2S气体加速腐蚀试验、 10％ CuSO4溶液点滴试验等多种手段测定其耐腐蚀性能;用 X-射线光电子谱 (XPS)及俄歇电子能谱 (AES)测定其价态及组成。结果表明：在最佳施镀条件下,可得光亮、致密、耐腐蚀性强于 A3钢、磷化膜及 Ni-P镀层的纳米复合化学镀层。镀层的原子百分组成约为 (％ )： Ni-P-Zn3(PO4)2： Ni 70.00,P 12.47,Zn3(PO4)2 13.93,C 3.6; Ni-P-ZnSnO3： Ni 77.56,P 10.00,ZnSnO3 9.84,C 2.6; Ni-P-ZnSiO3： Ni 83.00,P 10.96,ZnSiO3 5.15,C 0.89。