聚吡咯包裹WO3-x纳米粒子的制备及光动力光热和杀菌性能

利用氯化钨和吡咯等原料通过溶剂热法和原位还原制备了聚吡咯包裹的WO_3-x纳米粒子。用扫描电镜和红外光谱表征了复合材料,通过单线态氧生成能力、光热测试和体外杀菌实验,对比了聚吡咯包裹前后WO_3-x纳米粒子的光动力光热和杀菌性能。结果表明,得到的聚吡咯包裹的WO_3-x纳米粒子复合材料在808 nm照射下具有较好的单线态氧生成能力及光热性能。体外杀菌实验证明了其对革兰氏阳性菌和革兰氏阴性菌具有优秀的杀菌性能,对金黄色葡萄球菌和大肠杆菌的杀菌率分别为99.89%和99.71%。     

卟啉-石墨炔衍生物的光热/光动力联合治疗

在本研究中,我们设计合成了两种卟啉修饰的新型石墨炔衍生物GDYO-TPP和GDY-TPP,它们在有机溶剂和水中具有良好的分散性及优异的生物相容性.研究发现GDYO-TPP和GDY-TPP不仅具有优异的光热转换性能,还具有优异的产生单线态氧能力,并可用于肿瘤的光热/光动力联合治疗,在动物体内表现出优异的肿瘤细胞生长抑制作...     

Fe掺杂CuS纳米颗粒的合成及其在光热/化学动力学联合治疗中的应用

以乙酰丙酮铜和硫粉为铜源和硫源,在油酸(OA)-油胺(OM)-十八烯(ODE)体系中合成了近红外吸收的硫化铜(CuS)纳米颗粒,并通过改变硫元素活化状态的方式调节其吸收峰到适合光热治疗的1064 nm附近。通过阳离子交换法进一步制备了Fe、Mn等元素掺杂的CuS纳米颗粒,并保持其吸收峰位置几乎不变。使用微乳法进行聚乙二醇(PEG)化修饰后,这些纳米颗粒在水溶液中表现出良好的分散性和稳定性。分别测试了CuS纳米颗粒在Fe³⁺掺杂前后的光热性能及羟基自由基(·OH)生成能力。结果表明,PEG修饰后Fe³⁺掺杂的CuS纳米颗粒(CuS∶Fe-PEG)在1064 nm处的质量消光系数为37.5 L·g^-1·cm-1,光热转换效率可达43.7%。虽然光热性能略低于未掺杂的CuS-PEG,但其·OH生成能力有大幅提升。细胞实验也表明,在弱酸性条件下,CuS∶Fe-PEG具有更好的肿瘤细胞抑制能力,在1064 nm激光照射下能够有效杀死肿瘤细胞,可用于光热/化学动力学联合治疗。     

Fe掺杂CuS纳米颗粒的合成及其在光热/化学动力学联合治疗中的应用

以乙酰丙酮铜和硫粉为铜源和硫源,在油酸(OA)-油胺(OM)-十八烯(ODE)体系中合成了近红外吸收的硫化铜(CuS)纳米颗粒,并通过改变硫元素活化状态的方式调节其吸收峰到适合光热治疗的1 064 nm附近。通过阳离子交换法进一步制备了Fe、Mn等元素掺杂的CuS纳米颗粒,并保持其吸收峰位置几乎不变。使用微乳法进行聚乙二醇(PEG)化修饰后,这些纳米颗粒在水溶液中表现出良好的分散性和稳定性。分别测试了CuS纳米颗粒在Fe³⁺掺杂前后的光热性能及羟基自由基(·OH)生成能力。结果表明,PEG修饰后Fe³⁺掺杂的CuS纳米颗粒(CuS∶Fe-PEG)在1 064 nm处的质量消光系数为37.5 L·g^-1·cm^-1,光热转换效率可达43.7%。虽然光热性能略低于未掺杂的CuS-PEG,但其·OH生成能力有大幅提升。细胞实验也表明,在弱酸性条件下,CuS∶Fe-PEG具有更好的肿瘤细胞抑制能力,在1 064 nm激光照射下能够有效杀死肿瘤细胞,可用于光热/化学动力学联合治疗。     

聚吡咯及其纳米复合材料在光热治疗领域的应用

光热治疗是近年来兴起的一种治疗方法,具有靶向性强、适应性广的特点。在光热治疗中,通过光热剂对光的吸收将光能转化为热能,从而实现治疗作用,因而光热剂的光热转化性能直接决定了光热治疗的效果。光热剂的种类丰富,涵盖由无机到有机等组成和性能各异的多种材料。其中,聚吡咯具备良好的生物相容性、优异的光稳定性以及光热转化性能,在光热治疗领域受到广泛关注,是一种拥有巨大应用潜力的光热剂,然而其在光热治疗领域的发展趋势及前景却鲜有报道。本文综述了聚吡咯及其纳米复合材料的制备方法,详述了聚吡咯及其纳米复合材料在光热治疗领域中的应用情况,包括聚吡咯基纳米材料的自身性能和实际光热治疗的效果,指出以聚吡咯为基体或修饰材料来制备具有CT、磁共振、光声显影及光热治疗性能的聚吡咯基复合材料已成为发展趋势。在此基础上,本文还总结了聚吡咯基纳米复合材料在制备和应用中存在的问题,并分析了其在发展过程中遇到的挑战以及在生物医学应用中的前景。     

聚多巴胺修饰金纳米花的可控制备及在光热治疗中的应用

采用无模板法制备了金纳米花, 其形状与粒径大小可以通过改变反应温度和还原剂抗坏血酸的用量来调控; 然后, 通过多巴胺的表面原位聚合反应制备了聚多巴胺修饰的金纳米花, 以提高其在近红外区的吸收能力及生物相容性. 采用透射电子显微镜(TEM)、 紫外-可见吸收光谱(UV-Vis)和纳米粒度/Zeta电位仪等对金纳米花和聚多巴胺修饰金纳米花的形态、 粒径和光学特性进行了表征; 通过傅里叶变换红外吸收光谱(FTIR)分析证明聚多巴胺修饰成功; X射线衍射(XRD)分析结果表明, 聚多巴胺修饰前后金纳米花的晶体结构未变; 最后, 采用噻唑蓝(MTT)法体外评价了聚多巴胺修饰金纳米花的细胞毒性. 研究结果表明, 反应温度越低, 金纳米花表面分支结构越丰富, 以0 ℃为最佳反应温度; 还原剂抗血酸的用量越高, 金纳米花粒径越小; 金纳米花粒径在60~100 nm范围内可调, 最大吸收波长为575~650 nm. 经聚多巴胺修饰后, 金纳米花的最大吸收波长发生了显著红移(>80 nm), 近红外区的吸收范围显著扩大. 通过调控多巴胺溶液浓度, 可将金纳米花表面聚多巴胺层的厚度控制在8~14 nm. 在808 nm激光辐照下, 聚多巴胺修饰金纳米花溶液可迅速升温至57 ℃. 此外, 细胞实验结果表明, 聚多巴胺修饰后金纳米花的细胞毒性更低. 用其对HeLa肿瘤细胞进行光热治疗后, 细胞存活率仅为10%. 因此, 聚多巴胺修饰金纳米花作为光热试剂在肿瘤治疗领域具有潜在的应用前景.     

吡咯并吡咯二酮类光敏剂/光热试剂在肿瘤治疗中的应用研究进展

肿瘤的发病率呈逐年上升趋势,已成为威胁人类健康的第一大疾病.光疗(光动力疗法和光热疗法)作为一类新型的肿瘤治疗方式,具有创伤小、治疗周期短、毒副作用低、选择性好、无抗药性和免疫抑制等优点,受到了研究人员的广泛关注,并已被逐步应用于临床.作为光疗中至关重要的决定性因素,光敏剂和光热试剂的研究受到越来越多的重视.吡咯并吡咯二酮具有平面性好、电子亲和势强、合成简单、结构易修饰及摩尔吸光系数高等优点,是一种优异的光敏剂和光热试剂.从吡咯并吡咯二酮的结构改造、结构与性能关系、光疗作用机理等方面对近年来吡咯并吡咯二酮类光敏剂和光热试剂的研究现状进行了综述,并对其发展趋势进行了展望.     

新型聚多巴胺/聚丙烯酸-氢氧化铜双面神纳米粒子的制备及在体外光声影像和化疗-热疗协同癌症治疗中的应用

制备了双面神(Janus)结构的聚多巴胺/聚丙烯酸-氢氧化铜纳米粒子(PDA/PAA-Cu(OH)₂ JNPs)。PDA在近红外(NIR)区有较强的吸收,并且具有优异的生物相容性和可降解性;PAA纳米球与铜离子(Cu²⁺)配位后形成的PAA-Cu(OH)₂纳米粒子具有介孔结构,可用于装载抗癌药物;Cu(OH)₂在NIR区有较强的吸收,可用于光热治疗,实现不同功能有机融合,展现协同增效。选用亲水的阿霉素(DOX)作为药物模型,研究了此药物递送系统对肿瘤细胞(HepG-2)的抑制效果。合成的双面神纳米粒子具有高的药物(阿霉素)装载能力(药物负载容量=0.87 mg/mg)、良好的光热转换效率(45.9%)、 pH/近红外(NIR)双重响应药物释放性质和光声(PA)成像能力,可用于体外PA影像和化疗-热疗协同癌症治疗。体外毒性实验结果表明,DOX负载的PDA/PAA-Cu(OH)₂ JNPs加激光组呈现明显的癌细胞死亡,细胞存活率极低(7.9%)。     

中空碳酸锰纳米载体在化学动力学/声动力肿瘤联合治疗中的应用

通过调控肿瘤细胞内活性氧(Reactive oxygen species, ROS)水平,改变癌细胞内氧化还原平衡,从而诱导癌细胞氧化损伤和死亡,是肿瘤治疗的有效方法之一。本研究通过水热法合成了一种肿瘤特异性响应的可生物降解中空碳酸锰(MnCO₃)的纳米载体(HMC NPs),进一步负载声敏剂原卟啉(PpIX),获得了HMC-PpIX纳米复合粒子(HMC-P NPs)。研究表明,此体系在酸性的肿瘤微环境(Tumor microenvironment, TME)下可被激活、降解释放出Mn²⁺和声敏剂PpIX。一方面,在肿瘤内HCO₃^-/CO₂的生理缓冲环境中,过载的Mn²⁺可触发芬顿反应(Fenton reaction),将过表达的内源性H₂O₂转化为高毒性羟基自由基(·OH),介导化学动力学治疗(Chemodynamic therapy, CDT);另一方面,在超声辐射作用下,声敏剂PpIX可将细胞内的氧气转化为...     

Thermal Degradation Kinetics of N,N＇-Di（diethoxythiophosphoryl）-1,4-phenylenediamine

The non-isothermal degradation kinetics of N,N＇-di（diethoxythiophosphoryl）-1,4-phenylenediamine in N2 was studied by TG-DTG techniques.The kinetic parameters,including the activation energy and pre-exponential factor of the degradation process for the title compound were calculated by means of the Kissinger and Flynn-Wall-Ozawa（FWO）method and the thermal degradation mechanism of the title compound was also studied with the Satava-Sestak methods.The results indicate that the activation energy and pre-exponential factor are 152.61 kJ/mol and 9.06×101 4s -1with the Kissinger method and 154.08 kJ/mol with the Flynn-Wall-Ozawa method,respectively.It has been shown that the degradation of the title compound follows a kinetic model of one-dimensional diffusion or parabolic law,the kinetic function is G（α）=α2and the reaction order is n=2.     

Synthesis and electrical conductivity of poly(1,4-phenylenevinylene-co-2-nitro-1,4-phenylenevinylene)

A series of PPV copolymers containing 2-nitro-1,4-phenylenevinylene (NO₂-PV) units were prepared via the water-soluble precursor route. They were obtained in film form and were doped with I₂ and FeCl₃. Doping increased the electrical conductivities to maximum values of about 3×10^?2 and 3×10^?1 s cm^?1, respectively, for the two dopants. Conductivity depended strongly on the composition of the copolymers; it reached a maximum value at ca. 1–2 mol % of NO₂-PV units in the copolymers and then dropped rapidly with further increase in NO₂-PV content. Electronic effects of the substituent and morphological changes induced by copolymerization appear to interplay intricately, resulting in the occurrence of a maximum conducting composition. © 1993 John Wiley & Sons, Inc.     

Novel two-step synthesis of polybenzothiazoles via precursor polyamides from 2,5-bis(isopropylthio)-1,4-phenylenediamine and aromatic dicarboxylic acid chlorides

A novel two-step method for the synthesis of polybenzothiazoles has been developed starting from 2,5-bis(isoprophylthio)-1,4-phenylenediamine and aromatic dicarboxylic acid chlorides. The low-temperature solution polycondensation of these monomer pairs in N-methyl-2-pyrrolidone afforded the aromatic polyamides with pendant isopropylthio groups having inherent viscosities in the range of 0.8 and 2.4 dL/g. The soluble precursor polyamides were subjected to thermal cyclization to the corresponding polybenzothiazoles along with the elimination of propylene and water. The resulting polymers were also characterized.     

Reaction of 3(Z)-benzoylmethylidene-6-nitro-3,4-dihydro-2H-1,4-benzooxazin-2-one with oxalyl chloride

3(Z)-Benzoylmethylidene-6-nitro-3,4-dihydro-2H-1,4-benzooxazin-2-one reacts with (COCl)₂ as imino enol rather than enamino ketone. The reaction is accompanied by replacement of the hydroxy group by chlorine. The molecular and crystal structures of the starting 1,4-benzooxazin-2-one and its chlorinated derivative were studied by X-ray diffraction analysis.     

Near-infrared Aza-BODIPY Dyes Through Molecular Surgery for Enhanced Photothermal and Photodynamic Antibacterial Therapy

The widespread use of high-dose antibiotics will not only lead to the rapid acquisition of antibiotic resistance and increased incidence of drug-resistant bacterial infections, but also produce toxic side effects on normal tissues. Herein, two near-infrared dyes BDP-4PTZ and BDP-4DPA were synthesized, and the electron donors of diphenylamine and phenothiazine with the only difference of sulphur(S)-lock between the two phenyl rings were introduced onto the electron acceptor aza-dipyrromethene boron difluoride(aza-BODIPY) through molecular surgery. Through co-precipitation into nanoparticles(NPs), BDP-4PTZ NPs and BDP-4DPA NPs were fabricated with good biocompatibility. Upon 660 nm photoirradiation, BDP-4PTZ NPs and BDP-4DPA NPs showed excellent photothermal conversion efficiency(43% and 50%, respectively) and reactive oxygen species(ROS) production performance(ca. 3.6 and 6 times higher than that of indocyanine green, respectively). In vitro antibacterial experiments indicated that both NPs could effectively destroy the bacteria's membrane to eradicate drug-resistant bacteria. Furthermore, the bacterial abscess was effectively eliminated after treatment with BDP-4DPA NPs under 660 nm photoirradiation without adverse effects. Thus, through molecular surgery, BDP-4DPA without the S-lock demonstrates synergistic photothermal and photodynamic antimicrobial activities, which is promising for further molecular design towards effective neo-antimicrobial phototherapy.     

Preparation and characterization of polyaniline films in the presence of N-phenyl-1,4-phenylenediamine

The chemical oxidation of aniline to form polyaniline (PANI) films was made in the presence of N-phenyl-1,4-phenylenediamine (PPDA) in aqueous hydrochloric acid medium. The PANI films were monitored by using the quartz crystal microbalance (QCM) technique. The effect of PPDA and its concentration on the film formation was investigated. It was found that PPDA decreases the yield of the PANI film, the induction period and the depletion time of the polymerization. However, the growth rate of the film formation was found to increase by increasing PPDA concentration. These results were justified by measuring the UV-VIS absorption spectra for the in situ PANI films and the in situ UV-VIS absorption spectra for the polymer in the bulk during the polymerization. The conductivity for the PANI films at different concentrations of PPDA was measured. Also, the IR spectra, X-ray and the thermal gravimetric analysis for the PANI powder formed in the bulk in the presence of PPDA were measured and discussed.     

A photosensitizer-loaded zinc oxide-polydopamine core-shell nanotherapeutic agent for photodynamic and photothermal synergistic therapy of cancer cells

In clinical cancer research,it is quite promising to develop multimodal synergistic therapeutic strategies.Photodynamic and photothermal synergistic therapy is a very desirable multimodal therapy strategy.Herein,we report a facile and simple method to construct a nanotherapeutic agent for photodynamic and photothermal therapy.This nanotherapeutic agent(ZnO@Ce6-PDA) is composed of a ZnO nanoparticle core,an interlayer of photosensitizer chlorin e6(Ce6) and an outer layer of polydopamine(PDA).Due ...     

Methods for the Synthesis of Heteroaryl-substituted 1,4-Benzo- and 1,4-Naphthoquinones. (Review)

Methods for the synthesis of heteroaryl-substituted 1,4-benzo- and 1,4-naphthoquinones with a C-C bond between the heterocycle and quinone fragments are reviewed. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 803–833, June, 2005.     

N,N'-二(二乙氧基硫代磷酰基)-1,4-苯二胺的合成、晶体结构及热性能研究

通过二乙氧基硫代磷酰氯与对苯二胺反应生成了标题化合物N,N'-二(二乙氧基硫代磷酰基)-1,4-苯二胺，并应用元素分析, FTIR及¹H NMR对标题化合物进行了表征. 利用X射线单晶衍射测定了其晶体结构, 同时应用TG分析法对其热性能进行了分析. 标题化合物的相对分子质量M_r＝412.42, 为正交晶系, Pbca空间群, 晶胞参数为a＝0.86936(16) nm, b＝1.2787(2) nm, c＝1.8897(3) nm, β＝90°, V＝2.1006(7) nm³, Z＝8, D_c＝1.304 g/cm³, μ(Mo Kα)＝0.425 mm^－1, F(000)＝872, S＝1.052. 最终偏离因子R＝0.0628, wR＝0.1860, 可观测衍射点1852个[I＞2σ(I)]. 该晶体通过对苯二胺连接并以中心对称分布, 并形成层状结构, 且存在弱的分子内氢键N—H…S. TG分析表明该化合物有很好的热稳定性及成炭性, 通过其阻燃聚丙烯腈表明, 该物质是一种高效能的膨胀型阻燃剂.