金属-有机骨架材料在催化氨硼烷水解释氢中的研究进展

当前，化石燃料的大量消耗和对能源日益增长的需求推动了可再生和高效能源材料的开发。氢因丰富的来源以及清洁的特性而被视为潜在的能源载体。通过水解氨硼烷制备清洁可再生的氢气是解决能源问题的有效途径之一。开发高效安全的催化剂一直是该领域研究的重点和热点。金属-有机骨架材料（MOFs）因其独特的结构、组成和特性，在氨硼烷水解制氢中有广泛的应用。本文以MOFs材料在催化剂设计制备中的作用为侧重点，综述了不同MOFs材料在催化氨硼烷水解制氢反应中的作用，对其在催化氨硼烷水解制氢应用过程中所存在的问题和今后的发展进行了总结和展望。     

氨硼烷催化水解制氢

氢气作为全球公认的清洁能源载体,备受关注。寻找安全高效的储氢材料以转型到氢能社会是当前氢能应用面临最大的挑战之一。氨硼烷(NH₃BH₃,AB)具有非常高的储氢质量分数(19.6 wt%)和体积储氢密度(0.145 kgH₂/L),因其在储氢和放氢性能方面的显著优势,被认为是一种颇具应用潜力的化学储氢材料。氨硼烷能够通过热解、醇解和水解放出氢气。其中,氨硼烷水解制氢可以通过催化剂进行可控放氢,且具有反应条件温和、不产生CO(易使催化剂中毒)等优点,被认为是一种安全高效和实用性强的制氢技术。本文简要介绍了氨硼烷的性质和合成,阐述了氨硼烷水解制氢的机理,综述了近年来氨硼烷水解制氢催化剂的研究进展,分析了碱对氨硼烷水解制氢的促进作用,并讨论了水解产物回收利用问题。     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂. 利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能. 相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能. 动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol^-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能. 钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景. 这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢（英文）

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂.利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能.相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能.动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能.钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景.这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

Ru/Ce(OH)CO_3纳米复合材料催化氨硼烷水解产氢（英文）

采用一种简单的方法快速合成了Ru/Ce(OH)CO_3纳米复合材料。基于TG,XRD,TEM,EDX,XPS和ICP等方法详细表征了所制备的催化剂,并用于催化氨硼烷水解制氢。表征结果表明尺寸大约为4.8 nm的Ru纳米粒子高度分散在Ce(OH)CO_3纳米棒上。该催化剂对于氨硼烷水解制氢表现出优异的催化性能,在室温下其转化频率(TOF)达到389.6 molH_2·molRu~(-1)·min~(-1)。而且该催化剂循环使用11次之后依然能够对氨硼烷催化产氢保持很高的活性。     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m2·g-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 m L·min-1·g-1,活化能为29.1 k J·mol-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

氨基硼烷化合物的合成及应用研究进展

氨基硼烷化合物近年来在储氢材料的开发以及在有机合成中的应用非常广泛。本文综述了氨基硼烷的合成及其作为储氢材料的研究进展,以及近十几年来氨基硼烷在有机合成中作为还原试剂、在不对称还原反应中作手性催化剂及其他反应中的应用研究进展。指出加入金属氢化物制备的金属氨硼烷具有较优的放氢性能、可再生氨硼烷储氢材料的开发和制备是储氢材料新的发展方向;发展清洁高效的绿色还原体系和高选择性的手性氨硼烷催化剂是氨硼烷研究领域的新热点;氨硼烷试剂在储氢材料开发和绿色还原试剂领域具有潜在的实际应用价值。     

Ru/Ce(OH)CO3纳米复合材料催化氨硼烷水解产氢

采用一种简单的方法快速合成了Ru/Ce（OH）CO₃纳米复合材料。基于TG,XRD,TEM,EDX,XPS和ICP等方法详细表征了所制备的催化剂,并用于催化氨硼烷水解制氢。表征结果表明尺寸大约为4.8 nm的Ru纳米粒子高度分散在Ce（OH）CO₃纳米棒上。该催化剂对于氨硼烷水解制氢表现出优异的催化性能,在室温下其转化频率（TOF）达到389.6 mol_H2·mol_Ru^-1·min^-1。而且该催化剂循环使用11次之后依然能够对氨硼烷催化产氢保持很高的活性。     

Ru/Ce(OH)CO3纳米复合材料催化氨硼烷水解产氢

采用一种简单的方法快速合成了Ru/Ce（OH）CO₃纳米复合材料。基于TG,XRD,TEM,EDX,XPS和ICP等方法详细表征了所制备的催化剂,并用于催化氨硼烷水解制氢。表征结果表明尺寸大约为4.8 nm的Ru纳米粒子高度分散在Ce（OH）CO₃纳米棒上。该催化剂对于氨硼烷水解制氢表现出优异的催化性能,在室温下其转化频率（TOF）达到389.6 mol_H2·mol_Ru^-1·min^-1。而且该催化剂循环使用11次之后依然能够对氨硼烷催化产氢保持很高的活性。     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m²·g^-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 mL·min^-1·g^-1,活化能为29.1 kJ·mol^-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

Three-dimensional nitrogen-doped graphene hydrogel supported Co-CeOx nanoclusters as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane

Benefit from the strong synergistic electronic effect between Co and CeO_x, as well as the strong metalsupport interaction between Co-CeO_x and 3D NGH, the as-synthesized Co-(CeO_x)_0.91/NGH catalyst exhibits excellent catalytic activity toward hydrolysis of ammonia borane, with the turnover frequency (TOF) value of 79.5 min^-1.     

Defect‐Rich Co−CoOx‐Graphene Nanocatalysts for Efficient Hydrogen Production from Ammonia Borane

Chemical hydrogen storage ammonia borane has attracted extensive attention as a method of efficient utilization of hydrogen energy. The high‐efficiency catalysts are the main factor restricting the hydrogen production of ammonia borane. In this paper, the synergistic effect of Co and CoO_x supported on graphene (named Co?CoO_x@GO‐II) promotes the efficient hydrogen production of ammonia borane, and its catalytic hydrogen production rate can reach 5813 mL min^?1 g_Co^?1 at 298 K, the corresponding TOF is 15.33 min^?1. After five stability tests, Co?CoO_x @GO‐II maintained 65% of its original catalytic performance. The synergy of metal and metal oxide and the defects in the atomic arrangement ensure the catalytic activity, the large specific surface area of graphene ensures the dispersion and fixation. This strategy may provide a possibility to design high‐performance transition metal catalysts.     

Nanostructured Ni2P as a Robust Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Ammonia–borane (AB) is a promising chemical hydrogen‐storage material. However, the development of real‐time, efficient, controllable, and safe methods for hydrogen release under mild conditions is a challenge in the large‐scale use of hydrogen as a long‐term solution for future energy security. A new class of low‐cost catalytic system is presented that uses nanostructured Ni₂P as catalyst, which exhibits excellent catalytic activity and high sustainability toward hydrolysis of ammonia–borane with the initial turnover frequency of 40.4 mol_(H2) mol_(Ni2P)^?1 min^?1 under air atmosphere and at ambient temperature. This value is higher than those reported for noble‐metal‐free catalysts, and the obtained Arrhenius activation energy (E_a=44.6 kJ mol^?1) for the hydrolysis reaction is comparable to Ru‐based bimetallic catalysts. A clearly mechanistic analysis of the hydrolytic reaction of AB based on experimental results and a density functional theory calculation is presented.     

Ruthenium deposited on MCM-41 as efficient catalyst for hydrolytic dehydrogenation of ammonia borane and methylamine borane

Ultrafine Ru nanoparticles are successfully deposited on MCM-41 by using a simple liquid impregnationreduction method, and further investigated for catalytic hydrolysis of ammonia borane and methylamine borane. Among all the catalysts tested, 1.12 wt% Ru/MCM-41 exhibits the highest catalytic activity, with turnover frequency value of 288 min^-1.     

Production of Dihydrogen Using Ammonia Borane as Reagent and Pyrazole as Catalyst

Theoretical chemistry (DLPNO-CCSD(T)/def2-TZVP//M06-2x/aug-cc-pVDZ) was used to design a system based on ammonia boranes catalyzed by pyrazoles with the aim of producing dihydrogen, nowadays of high interest as clean fuel. The reactivity of ammonia borane and cyclotriborazane were investigated, including catalytic activation through 1H-pyrazole, 4-methoxy-1H-pyrazole, and 4-nitro-1H-pyrazole. The results point toward a catalytic cycle by which, at the same time, ammonia borane can initially store and then, through catalysis, produce dihydrogen and amino borane. Subsequently, amino borane can trimerize to form cyclotriborazane that, in presence of the same catalyst, can also produce dihydrogen. This study proposes therefore a consistent progress in using environmentally sustainable (metal free) catalysts to efficiently extract dihydrogen from small B−N bonded molecules.     

Supported Rhodium Catalysts for Ammonia–Borane Hydrolysis: Dependence of the Catalytic Activity on the Highest Occupied State of the Single Rhodium Atoms

Supported metal nanocrystals have exhibited remarkable catalytic performance in hydrogen generation reactions, which is influenced and even determined by their supports. Accordingly, it is of fundamental importance to determine the direct relationship between catalytic performance and metal–support interactions. Herein, we provide a quantitative profile for exploring metal–support interactions by considering the highest occupied state in single‐atom catalysts. The catalyst studied consisted of isolated Rh atoms dispersed on the surface of VO₂ nanorods. It was observed that the activation energy of ammonia–borane hydrolysis changed when the substrate underwent a phase transition. Mechanistic studies indicate that the catalytic performance depended directly on the highest occupied state of the single Rh atoms, which was determined by the band structure of the substrates. Other metal catalysts, even with non‐noble metals, that exhibited significant catalytic activity towards NH₃BH₃ hydrolysis were rationally designed by adjusting their highest occupied states.     

Synthesis of Ni-Ru alloy nanoparticles and their high catalytic activity in dehydrogenation of ammonia borane

We report the synthesis and characterization of new Ni(x)Ru(1-x) (x = 0.56-0.74) alloy nanoparticles (NPs) and their catalytic activity for hydrogen release in the ammonia borane hydrolysis process. The alloy NPs were obtained by wet-chemistry method using a rapid lithium triethylborohydride reduction of Ni(2+) and Ru(3+) precursors in oleylamine. The nature of each alloy sample was fully characterized by TEM, XRD, energy dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). We found that the as-prepared Ni-Ru alloy NPs exhibited exceptional catalytic activity for the ammonia borane hydrolysis reaction for hydrogen release. All Ni-Ru alloy NPs, and in particular the Ni(0.74)Ru(0.26) sample, outperform the activity of similar size monometallic Ni and Ru NPs, and even of Ni@Ru core-shell NPs. The hydrolysis activation energy for the Ni(0.74)Ru(0.26) alloy catalyst was measured to be approximately 37?kJ?mol(-1). This value is considerably lower than the values measured for monometallic Ni (≈70?kJ?mol(-1)) and Ru NPs (≈49?kJ?mol(-1)), and for Ni@Ru (≈44?kJ?mol(-1)), and is also lower than the values of most noble-metal-containing bimetallic NPs reported in the literature. Thus, a remarkable improvement of catalytic activity of Ru in the dehydrogenation of ammonia borane was obtained by alloying Ru with a Ni, which is a relatively cheap metal.