Dual solutions of a mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids

The aim of this paper is to study the development of mixed convection flow near the stagnation point region over an exponentially stretching/shrinking sheet in nanofluids. The external flow, stretching velocity and wall temperature are assumed to vary as prescribed exponential functions. Using the local similarity method, it has been shown that dual solutions of velocity and temperature exist for certain values of suction/injection, mixed convection, nanoparticle volume fraction and stretching/shrinking parameters. The transformed non-linear ordinary differential equations along with the boundary conditions form a two point boundary value problem and are solved using Shooting method, by converting into an initial value problem. In this method, the system of equations is converted into a set of first order system which is solved by fourth-order Runge–Kutta method. Three different types of nanoparticles, namely copper (Cu), aluminum oxide (Al₂O₃) and titanium oxide (TiO₂) are considered by using water-based fluid with Prandtl number Pr = 6.2. It is also found that the skin friction coefficient and the heat transfer rate at the surface are highest for Copper–water nanofluids as compared to Al₂O₃. The effect of the solid volume fraction parameter φ of the nanofluids on the heat transfer characteristics is also investigated. The results indicate that dual solutions exist only for shrinking sheet. The effects of various parameters on the velocity and temperature profiles are also presented here.     

纳米流体在伸/缩楔体上的MHD流动数值研究

对纳米流体在伸/缩楔体上的磁流体(MHD)流动进行了数值研究。首先,通过相似变换将控制偏微分方程转化为非线性常微分方程组;然后,利用Matlab软件,借助打靶法,结合四阶五常龙格库塔迭代方案进行数值求解;最后,详细讨论了各控制参数对无量纲速度、温度、浓度、表面摩擦系数、局部Nusselt数和局部Sherwood数的影响。结果表明,楔体在拉伸情况下只有唯一解,理论上不会出现边界层分离;而在一定收缩强度范围内存在双解,边界层流动在壁面处可能会出现边界层分离,壁面抽吸会使边界层分离推迟;楔体在拉伸情况下,磁场参数对表面摩擦系数的影响较大,对局部Nusselt数和局部Sherwood数的影响较小。     

Mixed convection stagnation point flow of a micropolar fluid towards a stretching sheet

The mixed convection two-dimensional boundary layer flow of a micropolar fluid near the stagnation point on a stretching vertical sheet is investigated. The stretching velocity and the surface temperature are assumed to vary linearly with the distance from the stagnation point. The transformed ordinary differential equations are solved numerically for some values of the parameters involved using a finite-difference scheme known as the Keller-box method. The features of the flow and heat transfer characteristics are analyzed and discussed. Both assisting and opposing flows are considered. Results are presented in terms of the skin friction coefficient and the local Nusselt number with selections of velocity, microrotation and temperature profiles. Dual solutions are found to exist for the opposing flow.     

Modeling natural convection boundary layer flow of micropolar nanofluid over vertical permeable cone with variable wall temperature

This paper discusses the natural convection boundary layer flow of a micropolar nanofluid over a vertical permeable cone with variable wall temperatures. Non-similar solutions are obtained. The nonlinearly coupled differential equations under the boundary layer approximations governing the flow are solved numerically using an efficient, iterative, tri-diagonal, implicit finite difference method. Different experimental correlations for both nanofluid effective viscosity and nanofluid thermal conductivity are considered.It is found that as the vortex-viscosity parameter increases, both the velocity profiles and the local Nusselt number decrease. Also, among all the nanoparticles considered in this investigation, Cu gives a good convection.     

MHD stagnation point flow towards heated shrinking surface subjected to heat generation/absorption

The magnetohydrodynamic(MHD) stagnation point flow of micropolar fluids towards a heated shrinking surface is analyzed.The effects of viscous dissipation and internal heat generation/absorption are taken into account.Two explicit cases,i.e.,the prescribed surface temperature(PST) and the prescribed heat flux(PHF),are discussed.The boundary layer flow and energy equations are solved by employing the homotopy analysis method.The quantities of physical interest are examined through the presentation of plots/tabulated values.It is noticed that the existence of the solutions for high shrinking parameters is associated closely with the applied magnetic field.     

On stagnation point flow of Sisko fluid over a stretching sheet

The steady two-dimensional stagnation-point flow, represented by Sisko fluid constitutive model, over a stretching sheet is investigated theoretically. Using suitable similarity transformations, the governing boundary-layer equations are transformed into the self-similar non-linear ordinary differential equation. The transformed equation is then solved using a very efficient analytic technique namely the homotopy analysis method (HAM) and the HAM solutions are validated by the exact analytic solutions obtain in certain special cases. The influence of the power-law index (n), the material parameter (A) and the velocity ratio parameter (d/c) on the flow characteristics is studied and presented through several graphs. In addition, the local skin friction coefficient for several values of these parameters is tabulated and examined. The similarity solutions for both the Newtonian and the power-law fluids are presented as special cases of the analysis. The results obtained reveal that, in comparison with the Newtonian and the power-law fluids, the velocity profiles of the Sisko fluid are much faster (slower), for d/c<1 (d/c>1), respectively.     

Entropy analysis for viscoelastic magnetohydrodynamic flow over a stretching surface

This paper presents the application of the second law analysis of thermodynamics to viscoelastic magnetohydrodynamic flow over a stretching surface. The velocity and temperature profiles are obtained analytically using the Kummer's functions and used to compute the entropy generation number. The effects of the magnetic parameter, the Prandtl number, the heat source/heat sink parameter and the surface temperature parameter on velocity and temperature profiles are presented. The influences of the same parameters, the Hartmann number, the dimensionless group parameter and the Reynolds number on the entropy generation are also discussed.     

Accurate solutions for viscoelastic boundary layer flow and heat transfer over stretching sheet

In this article, we present accurate analytical solutions for boundary layer flow and heat transfer of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface subject to a transverse uniform magnetic field using the homotopy analysis method （HAM） for two general types of non-isothermal boundary conditions. In addition, we demonstrate that the previously reported analytical solutions for the temperature field given in terms of Kummer＇s function do not converge at the boundary. We provide a graphical and numerical demonstration of the convergence of the HAM solutions and tabulate the effects of various parameters on the skin friction coefficient and wall heat transfer.     

Axisymmetric magnetohydrodynamic flow of micropolar fluid between unsteady stretching surfaces

This investigation examines the time dependent magnetohydrodynamic (MHD) flow problem of a micropolar fluid between two radially stretching sheets. Both strong and weak concentrations of microelements are taken into account. Suitable transformations are employed for the conversion of partial differential equations into ordinary differential equations. Solutions to the resulting problems are developed with a homotopy analysis method (HAM). The angular velocity, skin friction coefficient, and wall couple stress coefficient are illustrated for various parameters.     

MHD stagnation point flow of a micropolar fluid towards a heated surface

The problem of two dimensional stagnation point flow of an electrically conducting micropolar fluid impinging normally on a heated surface in the presence of a uniform transverse magnetic field is analyzed. The governing continuity, momentum, angular momentum, and heat equations together with the associated boundary conditions are reduced to dimensionless form using suitable similarity transformations. The reduced self similar non-linear equations are then solved numerically by an algorithm based on the finite difference discretization. The results are further refined by Richardson’s extrapolation. The effects of the magnetic parameter, the micropolar parameters, and the Prandtl number on the flow and temperature fields are predicted in tabular and graphical forms to show the important features of the solution. The study shows that the velocity and thermal boundary layers become thinner as the magnetic parameter is increased. The micropolar fluids display more reduction in shear stress as well as heat transfer rate than that exhibited by Newtonian fluids, which is beneficial in the flow and thermal control of polymeric processing.     

Unsteady flow of a Maxwell hybrid nanofluid past a stretching/shrinking surface with thermal radiation effect

Applied Mathematics and Mechanics - The non-Newtonian fluid model reflects the behavior of the fluid flow in global manufacturing progress and increases product performance. Therefore, the present...     

Unsteady three‐dimensional boundary layer flow due to a stretching surface in a micropolar fluid

In this paper, the unsteady three‐dimensional boundary layer flow due to a stretching surface in a viscous and incompressible micropolar fluid is considered. The partial differential equations governing the unsteady laminar boundary layer flow are solved numerically using an implicit finite‐difference scheme. The numerical solutions are obtained which are uniformly valid for all dimensionless time from initial unsteady‐state flow to final steady‐state flow in the whole spatial region. The equations for the initial unsteady‐state flow are also solved analytically. It is found that there is a smooth transition from the small‐time solution to the large‐time solution. The features of the flow for different values of the governing parameters are analyzed and discussed. The solutions of interest for the skin friction coefficient with various values of the stretching parameter c and material parameter K are presented. Copyright © 2011 John Wiley & Sons, Ltd.     

Disturbed boundary layer flow with local time-dependent surface heating

Local flows in a laminar boundary layer flowing over surface heating elements are investigated. Mathematical models of disturbed flows are constructed on the basis of an asymptotic analysis and the similarity parameters are determined. The time-dependent local heating regimes ensuring control of separation and flow stability in the boundary layer are studied. The results of a numerical and analytic analysis are obtained.     

Viscoelastic MHD flow boundary layer over a stretching surface with viscous and ohmic dissipations

In this study the momentum and heat transfer characteristics in an incompressible electrically conducting viscoelastic boundary layer fluid flow over a linear stretching sheet are considered. Highly non-linear momentum and thermal boundary layer equations are reduced to set of nonlinear ordinary differential equations by appropriate transformation.     

Non-Newtonian magnetohydrodynamic flow over a stretching surface with heat and mass transfer

An analysis is carried out to study the momentum, mass and heat transfer characteristics on the flow of visco-elastic fluid (Walter's liquid-B model) past a stretching sheet in the presence of a transverse magnetic field.In heat transfer, two cases are considered:

1.

The sheet with prescribed surface temperature (PST case); and

2.

The sheet with prescribed wall heat flux (PHF case).

The solution of equations of momentum, mass and heat transfer are obtained analytically. Emphasis has been laid to study the effects of various parameters like magnetic parameter Mn, visco-elastic parameter k₁, Schmidt number Sc, and Prandtl number Pr on flow, heat and mass transfer characteristics.     

Wavelet analysis of stagnation point flow of non-Newtonian nanofluid

The wavelet approach is introduced to study the influence of the natural convection stagnation point flow of the Williamson fluid in the presence of thermophysical and Brownian motion effects. The thermal radiation effects are considered along a permeable stretching surface. The nonlinear problem is simulated numerically by using a novel algorithm based upon the Chebyshev wavelets. It is noticed that the velocity of the Williamson fluid increases for assisting flow cases while decreases for opposing flow cases when the unsteadiness and suction parameters increase, and the magnetic effect on the velocity increases for opposing flow cases while decreases for assisting flow cases. When the thermal radiation parameter, the Dufour number, and Williamson's fluid parameter increase, the temperature increases for both assisting and opposing flow cases. Meanwhile, the temperature decreases when the Prandtl number increases. The concentration decreases when the Soret parameter increases, while increases when the Schmidt number increases. It is perceived that the assisting force decreases more than the opposing force.The findings endorse the credibility of the proposed algorithm, and could be extended to other nonlinear problems with complex nature.