Surface and wastewater quality monitoring: combination of liquid chromatography with (geno)toxicity detection,diode array detection and tandem mass spectrometry for identification of pollutants

Identification of unknown water pollutants with liquid chromatography and tandem mass spectrometry (LC–MS–MS) is often more complex and time consuming than identification with gas chromatography and mass spectrometry (GC–MS). In order to focus the identification effort on relevant compounds, unknown peaks need to be selected carefully. Based on its frequency of occurrence in the LC–Diode Array Detection (LC–DAD) chromatograms of surface and infiltrated waters, an unknown peak was selected for identification with LC–MS–MS. This compound was identified as hexamethoxymethylmelamine (HMMM), a chemical often used in the coating industry. This is the first time the presence of this chemical in surface waters has been reported. In addition to HMMM, two other structurally related compounds were found to be present in the investigated surface water. A standard mixture of HMMM and its by-products did not exhibit (geno)toxicity under the test conditions applied in this study. In another example, a genotoxic fraction of an industrial wastewater was isolated and examined by LC–MS–MS using a modern quadrupole–orthogonal acceleration-time-of-flight mass spectrometer (Q-TOF). Four compounds were detected. The structures of two compounds present are proposed to be 9-amino-2-hydroxy-acridine and 9-hydroxy-acridine-N-oxide or its structural isomer dihydroxy-acridine. Confirmation with standards could not be carried out, as pure compounds are not available. The other two compounds (structural isomers) could not be identified based on the data available within this study.     

Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry

Acrylamide levels over a wide range of different food products were analysed using both liquid chromatography–tandem mass spectrometry (HPLC–MS–MS) and gas chromatography–tandem mass spectrometry (GC–MS–MS). Two different sample preparation methods for HPLC–MS–MS analysis were developed and optimised with respect to a high sample throughput on the one hand, and a robust and reliable analysis of difficult matrices on the other hand. The first method is applicable to various foods like potato chips, French fries, cereals, bread, and roasted coffee, allowing the analysis of up to 60 samples per technician and day. The second preparation method is not as simple and fast but enables analysis of difficult matrices like cacao, soluble coffee, molasses, or malt. In addition, this method produces extracts which are also well suited for GC–MS–MS analysis. GC–MS–MS has proven to be a sensitive and selective method offering two transitions for acrylamide even at low levels up to 1 μg kg⁻¹. For the respective methods the repeatability (n=10), given as coefficient of variation, ranged from 3% (acrylamide content of 550 μg kg⁻¹) to 12% (acrylamide content of 8 μg kg⁻¹) depending on the food matrix. The repeatability (n=3) for different food samples spiked with acrylamide (5–1500 μg kg⁻¹) ranged from 1 to 20% depending on the spiking level and the food matrix. The limit of quantification (referred to a signal-to-noise ratio of 9:1) was 30 μg kg⁻¹ for HPLC–MS–MS and 5 μg kg⁻¹ for GC–MS–MS. It could be demonstrated that measurement uncertainties were not only a result of analytical variability but also of inhomogeneity and stability of the acrylamide in food.     

Liquid chromatography-(tandem) mass spectrometry of selected emerging pollutants (steroid sex hormones,drugs and alkylphenolic surfactants) in the aquatic environment

Among the various compounds considered as emerging pollutants, alkylphenolic surfactants, steroid sex hormones, and pharmaceuticals are of particular concern, both because of the volume of these substances used and because of their activity as endocrine disruptors or as causative agents of bacterial resistance, as is the case of antibiotics. Today, the technique of choice for analysis of these groups of substances is liquid-chromatography coupled to mass spectrometry (LC–MS) and tandem mass spectrometry (LC–MS–MS). In the last decades, this technique has experienced an impressive progress that has made possible the analysis of many environmental pollutants in a faster, more convenient, and more sensitive way, and, in some cases, the analysis of compounds that could not be determined before. This article reviews the LC–MS and LC–MS–MS methods published so far for the determination of alkylphenolic surfactants, steroid sex hormones and drugs in the aquatic environment. Practical considerations with regards to the analysis of these groups of substances by using different mass spectrometers (single quadrupole, ion trap and triple quadrupole instruments, etc.), interfaces and ionization and monitoring modes, are presented. Sample preparation aspects, with special focus on the application of advanced techniques, such as immunosorbents, restricted access materials and molecular imprinted materials, for extraction/purification of aquatic environmental samples and extracts are also discussed.     

Quantitation of anabolic hormones and their metabolites in bovine serum and urine by liquid chromatography-tandem mass spectrometry

A specific and sensitive method based on tandem mass spectrometry with on-line high-performance liquid chromatography using atmospheric pressure chemical ionisation (LC–APCI-MS–MS) for the quantitation of anabolic hormone residues (17β-19-nortestosterone, 17β-testosterone and progesterone) and their major metabolites (17-19-nortestosterone and 17-testosterone) in bovine serum and urine is reported. [²H₂]17β-Testosterone was used as internal standard. The analytes were extracted from urine (following enzymatic hydrolysis) and serum samples by liquid–liquid extraction and purified by C₁₈ solid-phase extraction. Ionisation was performed in a heated nebulizer interface operating in the positive ion mode, where only the protonated molecule, [M+H]⁺, was generated for each analyte. This served as precursor ion for collision-induced dissociation and two diagnostic product ions for each analyte were identified for the unambiguous hormone confirmation by selected reaction monitoring LC–MS–MS. The overall inter-day precision (relative standard deviation) ranged from 6.37 to 2.10% and from 6.25 to 2.01%, for the bovine serum and urine samples, respectively, while the inter-day accuracy (relative error) ranged from −5.90 to −3.18% and from −6.40 to −2.97%, for the bovine serum and urine samples, respectively. The limit of quantitation of the method was 0.1 ng/ml for all the hormones in bovine serum and urine. On account of its high sensitivity and specificity the method has been successfully used to confirm illegal hormone administration for regulatory purposes.     

Analysis of acidic drugs in the effluents of sewage treatment plants using liquid chromatography-electrospray ionization tandem mass spectrometry

Azaspiracid poisoning (AZP) is a new human toxic syndrome that is caused by the consumption of shellfish that have been feeding on harmful marine microalgae. A liquid chromatography–mass spectrometry (LC–MS) method has been developed for the determination of the three most prevalent toxins, azaspiracid (AZA1), 8-methylazaspiracid (AZA2) and 22-demethylazaspiracid (AZA3) as well as the isomeric hydroxylated analogues, AZA4 and AZA5. Separation of five azaspiracids was achieved on a C₁₈ column (Luna-2, 150×2 mm, 5 μm) with isocratic elution using acetonitrile–water containing trifluoroacetic acid and ammonium acetate as eluent modifiers. Using an electrospray ionisation (ESI) source with an ion-trap mass spectrometer, the spectra showed the protonated molecules, [M+H]⁺, with most major product ions due to the sequential loss of two water molecules. A characteristic fragmentation pathway that was observed in each azaspiracid was due to the cleavage of the A-ring at C₉–C₁₀ for each toxin. It was possible to select unique ion combinations to distinguish between the isomeric azaspiracids, AZA4 and AZA5. Highly sensitive LC–MS³ analytical methods were compared and the detection limits were 5–40 pg on-column. Linear calibrations were obtained for AZA1 in shellfish in the range 0.05–1.00 μg/ml (r²=0.9974) and good reproducibility was observed with a relative standard deviation (%RSD) of 1.8 for 0.9 μg AZA1/ml (n=5). The %RSD values for the minor toxins, AZA4 and AZA5, using LC–MS³ (A-ring fragmentation) were 12.3 and 8.1 (0.02 μg/ml; n=7), respectively. The selectivity of toxin determination was enhanced using LC–MS–MS with high energy WideBand activation.     

Simultaneous determination of paracetamol and chlorpheniramine in human plasma by liquid chromatography-tandem mass spectrometry

An analytical method for the determination of paracetamol and chlorpheniramine in human plasma has been developed, validated and applied to the analysis of samples from a phase I clinical trial. The analytical method consists in the extraction of paracetamol and chlorpheniramine with diethyl ether, followed by the determination of both drugs by an LC–MS–MS method, using 2-acetamidophenol as internal standard. The intra-assay and inter-assay precision and accuracy of this technique were good and the limit of quantitation was 0.5 μg/ml of plasma for paracetamol and 0.2 ng/ml for chlorpheniramine. The concentration working range was established between 0.5 μg/ml and 25 μg/ml for paracetamol and between 0.2 ng/ml and 50 ng/ml for chlorpheniramine. This method has been used for analyzing more than 1200 human plasma samples from a clinical study with 24 volunteers.     

Determination of N-acetylcysteine in human plasma by liquid chromatography coupled to tandem mass spectrometry

An analytical method for the determination of total N-acetylcysteine in human plasma has been developed, validated and applied to the analysis of samples from a phase I clinical trial. The analytical method consists of plasma digestion with dithiothreitol in order to reduce all the oxidized forms of N-acetylcysteine, and extraction with ethyl acetate followed by determination of levels by an LC–MS–MS method. The intra- and inter-assay precision and accuracy of this technique were good and the limit of quantitation was 50 ng/ml of plasma. The concentration working range was established between 50 ng/ml and 1000 ng/ml. This method has been used in the analysis of approximately 800 human plasma samples from a clinical study with 24 volunteers; the precision of the quality controls was in the range 8.7 to 13.4% and the accuracy was in the range −5.9 to 8.5%, expressed as the RSD and the relative error, respectively.     

Determination of alkylphenol and bisphenol A in beverages using liquid chromatography/electrospray ionization tandem mass spectrometry

A comprehensive analytical method based on liquid chromatography electrospray ionization tandem mass spectrometry (LC–ESI–MS/MS) with negative ionization mode has been developed for measuring of alkylphenols and bisphenol A in beverage samples. Concentration and clean up of samples were performed on 200 mg OASIS HLB solid extraction cartridges. The effects of mobile phases and additives on ionization were assessed. The recoveries for each compound ranged from 76.7 to 96.9% and reproducibilities were represented as having relative standard deviation (R.S.D.) below 10%. The limits of quantification (LOQ) of the method under multiple-reaction monitoring (MRM) acquisition mode were 0.04, 0.03 and 0.2 ng L⁻¹ for 2 L of mineral drinking water and 2.0, 1.8 and 8.0 ng L⁻¹ for 50 mL of soda beverages.     

Residue analysis of 15 penicillins and cephalosporins in bovine muscle, kidney and milk by liquid chromatography–tandem mass spectrometry

A sensitive and specific liquid chromatographic–tandem mass spectrometric (LC–MS–MS) method for most of those penicillins and cephalosporins for which EU maximum residue limits (MRL) were set in Council regulation (EEC) 2377/90 was developed and validated in bovine muscle, kidney and milk. The analytes were extracted with acetonitrile/water and cleaned-up by a single reversed-phase solid-phase extraction step. Highest sensitivity for the analytes was obtained when amoxicillin, ampicillin, cephalexin, cephapirin, desacetylcephapirin, cephalonium, cefquinome and cefazolin were measured in the positive electrospray ionisation mode (ESI (+)) and cefoperazone, benzylpenicillin, phenoxymethylpenicillin, oxacillin, cloxacillin, dicloxacillin and nafcillin in the negative electrospray ionisation mode (ESI (−)). Chromatography was performed with a formic acid/methanol gradient. Collision-induced dissociation (CID) with argon was used for fragmentation of the pseudomolecular ions to achieve the required specificity. Possible adverse matrix effects on the electrospray ionisation process caused by co-eluting matrix components were investigated. The method was validated closely to the new EU guidelines and applied to positively screened samples from official food control allowing the identification and quantification of the residual β-lactams.     

Mass spectrometric confirmation criterion for product-ion spectra generated in flow-injection analysis. Environmental application

The suitability of a confirmation criterion recently recommended in the Netherlands for gas chromatography with mass spectrometric detection (GC–MS), was evaluated for flow-injection analysis (FIA) with atmospheric pressure chemical ionisation MS–MS detection. The main feature of the criterion is that the relative ion abundances of the four diagnostic ions are taken into account. That is, for lower-intensity peaks, relative standard deviations may be higher; this is an advantage with chemical ionisation MS procedures. A series of triazines and their degradation products were used as test compounds. Tap and surface water samples spiked at 0.33 μg/l were analysed by means of a selected reaction monitoring MS–MS procedure. For all analytes but hydroxysimazine (3 transitions), 4–9 transitions could be selected which invariably met the demands of the criterion. Some of the transitions used originate from the ³⁷Cl isotopic mass of the parent compounds which provides additional structural information. Data for twenty surface water samples analysed by means of FIA–MS–MS as well as GC–MS and liquid chromatography with diode array UV and MS–MS detection gave essentially the same results over the 0.1–1.0 μg/l range. In two samples desethylatrazine was reported by FIA–MS–MS whereas this compound was not detected by GC–MS. For a first test, this is a promising result.     

Verapamil: new insight into the molecular mechanism of drug oxidation in the human heart

Verapamil is a commonly prescribed cardiovascular drug, but surprisingly its metabolism in the target tissue of pharmacotherapy is basically unknown. We therefore investigated its biotransformation in human heart tissue and correlate the production of metabolites with the gene expression of major drug metabolising enzymes. Using electrospray LC–MS–MS and LC–MS³ experiments, a total of nine metabolites were observed in incubation experiments with verapamil and microsomes isolated from the human heart tissue, and this included a carbinolamine-, N-formyl-, ahemiacetale-, and formate-intermediate of N-demethyl- and O-demethylverapamil. We also observed a hydroxylation product at the benzylic position of atom C-7 (M9). Metabolites M5–M9 are novel and were not observed in previous studies with liver or other human tissues. A fine example of the considerable metabolic competence of human heart is the formation of M1–M4, e.g. dealkylverapamil, norverapamil and isomers of O-demethylverapamil, which were believed to be exclusively produced by the liver.     

Evaluation of synthetic liquid chromatography—diode array detection—mass spectrometry data for the determination of enzyme kinetics

In this paper, we investigate the accuracy and precision of the results from diode array detector (DAD) data and mass spectrometry (MS) data as obtained subsequent to chromatographic separations using computer simulations. Special attention was given to simulations of multiple injections from a developing enzymatic reaction. These simulations result in three-way LC–DAD–MS kinetic data; LC–DAD and LC–MS data were also evaluated independently in this investigation. The noise characteristics of the MS detector prevent accurate determination of the individual reaction rate constants by the analysis method. Using the data from the DAD in combination with the MS detector results in improved estimation of the rate constants. The results also indicate that the higher resolving power of the MS information compensates for the lower signal-to-noise ratio in these data, compared to DAD data.     

Analysis of glycolytic intermediates in Saccharomyces cerevisiae using anion exchange chromatography and electrospray ionization with tandem mass spectrometric detection

The purpose of this study is to selectively and quantitatively analyze several glycolytic intermediates in cells of Saccharomyces cerevisiae using high-performance anion exchange chromatography (HPAEC) coupled to electrospray ionization tandem mass spectrometry for the analysis. A sodium hydroxide gradient is used to separate the glycolytic compounds and after the column sodium hydroxide is reduced by proton exchange with a membrane device prior to introduction to the mass spectrometer. The detection limits for 10 μl samples are down to the 0.4–5 pmol range. This corresponds for the intracellular metabolites to a range of 2–20 nmol per gram biomass dry weight (DW). Standard addition did reveal some influence of the sample matrix on the measured concentrations. Separation and analysis is hardly affected by the high sulfate and phosphate concentrations (1 mM) in the fermentation medium and by the intracellular matrix. Validation of the glucose-6-phosphosphate LC–MS–MS analysis results with enzymatic analysis showed an excellent agreement between the two methods. The suitability of the method was clearly shown by analyzing a series of steady state S. cerevisiae samples from a carbon limited aerobic chemostat culture.     

Acetogenic isoquinoline alkaloids: CXII. Separation and identification of dimeric naphthylisoquinoline alkaloids by liquid chromatography coupled to electrospray ionization mass spectrometry

The atropodiastereomeric dimeric naphthylisoquinoline alkaloids, michellamines A (1a), B (1b) and C (1c), together with their monomers, korupensamines A (2a) and B (2b), were investigated using electrospray ionization tandem mass spectrometry coupled to liquid chromatography (LC–ESI-MS–MS). From the spectra obtained, characteristic product ions were chosen to monitor the chromatographic separation achieved on an RP-18 column. Under acidic conditions required for chromatographic analysis, the monomeric alkaloids 2a and 2b yielded protonated molecules [M+H]⁺, while the dimers, the michellamines, exhibited doubly protonated [M+2H]²⁺ molecules. In addition, the coeluting alkaloids 1b and 2b were identified unambiguously by means of tandem mass spectrometry. Thus, together with the retention times of the alkaloids, the product ion spectra allowed us the identification of michellamines in the presence of their presumed biogenetic monomeric precursors. Application of the HPLC–MS–MS method successfully proved the enzymatic formation of michellamine C (1c) by in vitro dimerization of korupensamine B (2b).     

Quantitative analysis of cytokinins in plants by liquid chromatography–single-quadrupole mass spectrometry

A sensitive method for the quantitative analysis of all natural isoprenoid cytokinins in plant material by electrospray single-quadrupole mass spectrometry is presented. A baseline chromatographic separation of 20 non-derivatised naturally occurring cytokinins has been developed. Precise analyses of O-glucoside and ribonucleotide fractions were also performed by the high-performance liquid chromatography–mass spectrometry (HPLC–MS) but run separately from the basic cytokinin metabolites. Using post-column splitting, the flux from narrow-bore (2.1 mm i.d.) reversed-phase liquid chromatography column was simultaneously introduced into the diode array and mass detector. Optimal conditions, including final flow rate, desolvation temperature, desolvation gas flow, capillary and cone voltage for effective ionisation in the electrospray ion source were found. When low cone voltage (20 V) was applied, all studied cytokinins were determined in aqueous methanol as dominant quasi-molecular ions of [M+H]⁺ with limits of detection ranging between 10 and 50 fmol. For routine analysis a linearity range between 25 (75) fmol and 100 pmol was obtained. Developed liquid chromatography–mass spectrometry (LC–MS) method in selective ion monitoring mode was employed to quantify cytokinin species in tobacco BY-2 suspension culture and poplar leaves (Populus×canadensis Moench, cv Robusta).

Purified plant cell (BY-2) and plant tissue (poplar leaves) extracts were obtained by using two different ion-exchange chromatography steps, in combination with immunoaffinity purification using a broad-spectrum monoclonal anti-cytokinin antibody. The antibody strongly recognises the presence of N⁶-substituent on purine skeleton and thus does not bind adenine and related compounds. The presence of authentic cytokinins in the extracts quantified by LC–MS was further verified by enzyme-linked immunosorbent assays (ELISAs) with prior LC preparation. The combination of liquid chromatography–single-quadrupole mass spectrometry with immunoaffinity chromatography offers an efficient and elegant method for detection and quantification of cytokinin metabolites.     

Quantitative determination of sulfonamide in meat by liquid chromatography-electrospray-mass spectrometry

This paper describes a newly developed liquid chromatography–electrospray-mass spectrometry (LC–ES-MS) method for the quantitative determination of nine commonly used sulfonamides (sulfadiazine, sulfapyridine, sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfisoxazole, sulfadimethoxine, sulfaquinoaline and sulfaphenazole) in meat. [M+H]⁺ and [M+Na]⁺ were the two major ions detected in positive ion mode. Selective ion monitoring was employed for quantitative determination. Satisfactory linearity, 0.1–10 μg ml⁻¹, of each compound was obtained. Blank meat samples were fortified at levels between 50 and 500 μg kg⁻¹. [Phenyl-¹³C6]sulfamethazine was used as internal standard. Sulfonamides were isolated from meat with a solvent extraction procedure and then determined by LC–ES-MS. The limits of detection were below 10 μg kg⁻¹. The application of this newly developed method was demonstrated by analyzing various beef, pork and chicken samples from local markets.     

Evaluation of triclosan and biphenylol in marine sediments and urban wastewaters by pressurized liquid extraction and solid phase extraction followed by gas chromatography mass spectrometry and liquid chromatography mass spectrometry

Analytical methods, based on GC–MS and LC–MS, for the determination of traces of 2,4,4′-trichloro-2′-hydroxydiphenyl ether (triclosan) and biphenylol in urban wastewater and marine sediments were developed. These methods involve the use of diverse analytical techniques, such as solid phase extraction (SPE) and pressurized liquid extraction for sample preparation, and GC–negative chemical ionization MS and LC–electrospray ionization (ESI) MS–MS for identification and quantification. The recoveries of triclosan and biphenylol were 84 and 80% in wastewater and 100 and 73% in sediments, respectively. Detection limits obtained were in the range of ppb and ppt. To prove their applicability to real samples and as part of a more extensive monitoring program, the developed methods were applied to the analysis of wastewater samples, coming from an urban wastewater treatment plant (UWWTP), and of marine sediment samples collected at the outflow of two UWWTPs to the sea. Results obtained reveal the presence of triclosan in all the samples at concentrations that ranged from 0.8 to 37.8 μg/l in wastewater and from 0.27 to 130.7 μg/kg in sediments. These preliminary data reinforce the interest for further research on this topic.     

Determination of theophylline and its metabolites in biological samples by liquid chromatography-mass spectrometry

Liquid chromatography–mass spectrometry (LC–MS) is a powerful tool for analysis of drugs and their metabolites. We used a column-switching system in combination with atmospheric pressure chemical ionization LC–MS (LC–APCI–MS) for the determination of theophylline and its metabolites in biological samples. The separation was carried out on a reversed-phase column using methanol–20 mM ammonium acetate as a mobile phase at a flow-rate of 1 ml/min in 30 min. In the mass spectrum, the molecular ions of these drugs and metabolites were clearly observed as base peaks. This method is sufficiently sensitive and accurate for the pharmacokinetic studies of these drugs.     

Determination of diuron and the antifouling paint biocide irgarol 1051 in Dutch marinas and coastal waters

A sensitive LC–electrospray MS–MS method using off-line solid-phase extraction for the determination of diuron and Irgarol 1051 has been developed, enabling determination of both compounds at sub-ppt levels. Diuron and Irgarol 1051 are used as alternatives for tributyltin in antifouling paints that prevent growth on boats, and an increase in their application is anticipated because of the upcoming ban on tributyltin in 2003. In 2000, a survey was carried out to assess contamination with diuron and Irgarol 1051 of a number of Dutch marinas and coastal waters. Depending on the time of year, both compounds were encountered at levels higher than the maximum permissible concentrations of 430 and 24 ng/l for diuron and Irgarol 1051, respectively. Outside marinas at reference locations, concentrations were much lower, depending on the geographical situation and the nature of the water exchange with the environment related to tidal cycles. A seasonal influence was observed with highest levels in summer, corresponding to the yachting season for both compounds. For diuron, use in agriculture could have contributed to the high concentration encountered in surface waters.     

Monoclonal antibody-based ELISA for the quantification of nitrofuran metabolite 3-amino-2-oxazolidinone in tissues using a simplified sample preparation

A sensitive and specific monoclonal ELISA for the determination of tissue bound furazolidone metabolite 3-amino-2-oxazolidinone (AOZ) is described. The procedure enables the detection of AOZ in matrix supernatant after homogenisation, protease treatment, acid hydrolysis and derivatisation of AOZ released from the tissue by o-nitrobenzaldehyde. The formed p-nitrophenyl 3-amino-2-oxazolidinone (NPAOZ) is determined by ELISA calibrated with matrix-matched standards in the concentration range of 0.05–5.0 μg I⁻¹. The assay was validated according to criteria set down by Commission Decision 2002/657/EC for the performance and validation of analytical methods for chemical residues. Detection capability, set on the basis of acceptance of no false negative results, was 0.4 μg kg⁻¹ for shrimp, poultry, beef and pork muscle. This sensitivity approaches the established confirmatory LC–MS/MS able to quantify tissue-bound AOZ at levels as low as 0.3 μg kg⁻¹. An excellent correlation of results obtained by ELISA and LC/MS–MS within the concentration range 0–32.1 μg kg⁻¹ was found in the naturally contaminated shrimp samples (r = 0.999, n = 8). A similar correlation was found for the incurred poultry samples within the concentration range of 0–10.5 μg kg⁻¹ (r = 0.99, n = 8).