Hole‐transporting host‐polymer series consisting of triphenylamine basic structures for phosphorescent polymer light‐emitting diodes

A series of novel styrene derived monomers with triphenylamine‐based units, and their polymers have been synthesized and compared with the well‐known structure of polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine with respect to their hole‐transporting behavior in phosphorescent polymer light‐emitting diodes (PLEDs). A vinyltriphenylamine structure was selected as a basic unit, functionalized at the para positions with the following side groups: diphenylamine, 3‐methylphenyl‐aniline, 1‐ and 2‐naphthylamine, carbazole, and phenothiazine. The polymers are used in PLEDs as host polymers for blend systems with the following device configuration: glass/indium–tin–oxide/PEDOT:PSS/polymer‐blend/CsF/Ca/Ag. In addition to the hole‐transporting host polymer, the polymer blend includes a phosphorescent dopant [Ir(Me‐ppy)₃] and an electron‐transporting molecule (2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole). We demonstrate that two polymers are excellent hole‐transporting matrix materials for these blend systems because of their good overall electroluminescent performances and their comparatively high glass transition temperatures. For the carbazole‐substituted polymer (T_g = 246 °C), a luminous efficiency of 35 cd A^?1 and a brightness of 6700 cd m^?2 at 10 V is accessible. The phenothiazine‐functionalized polymer (T_g = 220 °C) shows nearly the same outstanding PLED behavior. Hence, both these polymers outperform the well‐known polymer of N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine, showing only a luminous efficiency of 7.9 cd A^?1 and a brightness of 2500 cd m^?2 (10 V). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3417–3430, 2010     

Investigation of spacer influences in phosphorescent‐emitting nonconjugated PLED systems

An assay was introduced to clarify influences on electroluminescent behavior for RGB‐colored phosphorescent terpolymers with N,N‐Di‐p‐tolyl‐aniline as hole‐transporting unit, 2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole (tert‐BuPBD) as electron‐transporting unit, and different iridium complexes in RGB‐colors as triplet emitting materials. All monomers were attached with spacer moieties to the “para” position of a polystyrene. Polymer light emitting diodes (PLEDs) were built to study the electro‐optical behavior of these materials. The gist was a remarkable influence of hexyl‐spacer units to the PLED performance. For all three colors only very restricted PLED performances were found. In comparison RGB‐terpolymers were synthesized with directly attached charge transport materials to the polymer backbone. For this directly linked systems efficiencies were 28 cd A^?1 @ 6 V (green), 4.9 cd A^?1 @ 5 V (red) and 4.3 cd A^?1 @ 6 V (bluish). In summary we assume that an improved charge percolation pathways regarding to the higher content of semiconducting molecules and an improved charge transfer to the phosphorescent dopand in the case of the copolymers without spacers are responsible for the better device performance comparing the copolymers with hexyl spacers. The approach of the directly connected charge transport materials at the nonconjugated styrene polymer backbone should be favored for further investigations, therefore. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 389–402, 2010     

Phosphine Sulfide-Based Bipolar Host Materials for Blue Phosphorescent Organic Light-Emitting Diodes

Three phosphine sulfide-based bipolar host materials, viz CzPhPS, DCzPhPS, and TCzPhPS, were facilely prepared through a one-pot synthesis in excellent yields. The developed hosts exhibit superior thermal stabilities with the decomposition temperatures (T_d) all exceeding 350 °C and the melting temperatures (T_m) over 200 °C. In addition, their triplet energy (E_T) levels are estimated to be higher than 3.0 eV, illustrating that they are applicable to serve as hosts for blue phosphorescent organic light-emitting diodes (PhOLEDs). The maxima luminance, current efficiency (CE), power efficiency (PE), and external quantum efficiency (EQE) of 17,223 cd m⁻², 36.7 cd A⁻¹, 37.5 lm W⁻¹, and 17.5% are achieved for the blue PhOLEDs hosted by CzPhPS. The PhOLEDs based on DCzPhPS and TCzPhPS show inferior device performance than that of CzPhPS, which might be ascribed to the deteriorated charge transporting balance as the increased number of the constructed carbazole units in DCzPhPS and TCzPhPS molecules would enhance the hole-transporting ability of the devices to a large extent. Our study demonstrates that the bipolar hosts derived from phosphine sulfide have enormous potential applications in blue PhOLEDs, and the quantity of donors should be well controlled to exploit highly efficient phosphine sulfide-based hosts.     

一种基于咔唑的新型磷光主体材料的合成及光电性能

设计并合成了一种基于咔唑的新型的磷光主体材料, 即9-(6-(9-咔唑基)己基)咔唑(hCP), 对其结构及性能进行了表征. 研究结果表明: hCP分子中两个咔唑与烷基链是非共平面的, 由于长烷基链的缠绕, 因而具有较高的三线态能级(3.01 eV)和较高的玻璃化温度(93℃); 以hCP为主体材料, 与绿光磷光染料三(2-苯基吡啶)合铱(Ir(ppy)₃)掺杂作为发光层, 制备了磷光电致发光器件, 其器件的最大电流效率为15.1 cd·A^-1, 相对于4,4'-N,N'-二咔唑基联苯(CBP)为主体材料的参考器件, 显著提高了34.8%.     

芳基硅磷光主体材料在有机电致发光器件中的应用

有机电致发光器件(organic light emitting diodes, OLEDs)在固态照明和平板显示等领域显现出巨大的商业应用前景,近年来受到人们的广泛关注。由于芳基硅基团的易修饰性和多功能性,可以通过连接结构不同的功能单元构建性能优异的主体材料,以此来实现高效的有机电致发光器件,因此近年来芳基硅基团在合成高性能电致发光主体材料方面获得了广泛的研究和关注。本文从材料的设计分类出发,综述了芳基硅主体材料的研究现状,对其分子结构特征、热力学性质、光物理性能、电化学性质及电致发光器件性能等做了详细的归纳总结,讨论了芳基硅主体材料在有机电致发光器件方面存在的不足,并展望了其应用前景和发展方向。     

Photophysical Properties and OLED Applications of Phosphorescent Platinum(II) Schiff Base Complexes

The syntheses, crystal structures, and detailed investigations of the photophysical properties of phosphorescent platinum(II) Schiff base complexes are presented. All of these complexes exhibit intense absorption bands with λ_max in the range 417–546 nm, which are assigned to states of metal‐to‐ligand charge‐transfer (¹MLCT) ¹[Pt(5d)→π*(Schiff base)] character mixed with ¹[lone pair(phenoxide)→π*(imine)] charge‐transfer character. The platinum(II) Schiff base complexes are thermally stable, with decomposition temperatures up to 495 °C, and show emission λ_max at 541–649 nm in acetonitrile, with emission quantum yields up to 0.27. Measurements of the emission decay times in the temperature range from 130 to 1.5 K give total zero‐field splitting parameters of the emitting triplet state of 14–28 cm^?1. High‐performance yellow to red organic light‐emitting devices (OLEDs) using these platinum(II) Schiff base complexes have been fabricated with the best efficiency up to 31 cd A^?1 and a device lifetime up to 77 000 h at 500 cd m^?2.     

Decoration of Dibenzofuran Using Cyanocarbazole via 6‐Position as a Molecular Design Approach for High‐Triplet‐Energy Bipolar Host Materials

In this study, two new dibenzofuran derivatives featuring one or two cyanocarbazole units, 6‐(dibenzo[b,d]furan‐4‐yl)‐9‐phenyl‐9H‐carbazole‐3‐carbonitrile ( mBFCzCN) and 6,6′‐(dibenzo[b,d]furan‐4,6‐diyl)bis(9‐phenyl‐9H‐carbazole‐3‐carbonitrile) ( dBFCzCN ), were developed as host materials for phosphorescent organic light emitting diodes (PhOLEDs). A new molecular design connecting the cyanocarbazole to the dibenzofuran using the cyanocarbazole 6‐position instead of its 9‐position was created, and the effects of number of cyanocarbazole units in the dibenzofuran building block on the photophysical and electroluminescence properties were investigated in detail. The mBFCzCN compound revealed high triplet energy (2.78 eV) than that of dBFCzCN (2.68 eV) and good bipolar charge transporting properties. The potential of these materials as hosts for blue and green PhOLEDs was investigated using bis(4,6‐(difluorophenyl)pyridinato‐N,C^2′)picolinate iridium(III) (FIrpic) and tris(2‐phenylpyridinato)iridium(III) (Ir(ppy)₃) dopants, respectively. The results indicated that the mBFCzCN with one cyanocarbazole unit showed better device performance than the dBFCzCN with two cyanocarbazole units in the blue and green devices. High external quantum efficiencies of 19.0 and 21.2 % were demonstrated in the blue and green PhOLEDs with the mBFCzCN host due to its high triplet energy and good bipolar charge transporting characteristics.     

Synthesis of an electroluminescent polymer and its non‐doped light‐emitting diodes with stable green emission

An electroluminescent polymer was synthesized by Wittig condensation and characterized by the measurements of ¹H‐NMR, IR, gel permeation chromatography (GPC), UV–Vis, PL, and cyclic voltammetry (CV). The polymer can be dissolved in common organic solvents such as tetrahydrofuran (THF), chloroform, and dichloromethane. The electroluminescent investigation showed that the non‐doped devices with a double‐layer configuration (ITO/PEDOT:PSS/Polymer/Mg:Ag) have a stable green emission property. The maximum luminance of the annealed device reaches 2317 cd/m². The emission maximum and the CIE 1931 coordinate values are respectively stabilized at 552 nm and near (x, y) = (0.43, 0.55) with different voltages. Copyright © 2008 John Wiley & Sons, Ltd.     

Electrochemiluminescence Studies of Phosphorescent Dopant and Host Molecules of Polymer Light-emitting Diodes

Electrochemiluminescence (ECL) from tris(2‐phenylpyridine)irdium [Ir(ppy)₃] was investigated following cross reaction of its anion with oxidized poly(N‐vinyl‐carbazole) (PVK) and its cation with reduced 2‐(4‐biphenylyl)‐5‐(4‐tert‐butyl‐phenyl)‐1,3,4‐oxadiazole (PBD). Both cross reactions show Ir(ppy)₃ emission and the cross reaction of PVK^+·/Ir(ppy)⁻₃ showed the highest ECL intensity. The comparisons of the reaction enthalpy and the energy of Ir(ppy)₃ light emitting shows that reaction between PVK^+· and Ir(ppy)⁻₃ is energy sufficient to populate metal‐to‐ligand charge transfer (MLCT) excited singlet (3.04 eV) of Ir(ppy)₃, while the reaction between Ir(ppy)⁺₃ and PBD^{− ·} is energy efficient to populate MLCT excited triplet (2.4 eV). The ECL result in solution reveals that the energy released from charge transfer between the Ir(ppy)₃ and PVK or PBD is sufficient to produce the excited state of Ir(ppy)₃ in solid polymer light‐emitting diodes (PLEDs) based on PVK:PBD hosts doped by Ir(ppy)₃. These results obtained will provide further insight into charge‐transfer excitation in PLEDs.     

咔唑取代二苯乙烯基芳烃的制备及其电致发光特性

Novel blue organic electroluminescent materials with improved hole transporting ability were synthesized by incorporating carbazoles into distyrylarylene (DSA). The new carbazole substituted DSA derivatives (CDSA) were characterized by ^1H NMR, IR, MS and elemental analysis. The luminescent characteristics of CDSA were investigated. Two types of blue light emitting diodes were constructed from CDSA: ITO/NPB/CDSA/PBD/LiF/Al and ITO/CDSA/PBD/LiF/Al.     

Acridine Based Small Molecular Hole Transport Type Materials for Phosphorescent OLED Application

Two small molecular hole-transporting type materials, namely 4-(9,9-dimethylacridin-10(9H)-yl)-N-(4-(9,9-dimethylacridin-10(9H)-yl)phenyl)-N-phenylaniline (TPA-2ACR) and 10,10′-(9-phenyl-9H-carbazole-3,6-diyl)bis(9,9-dimethyl-9,10-dihydroacridine) (PhCAR-2ACR), were designed and synthesized using a single-step Buchwald–Hartwig amination between the dimethyl acridine and triphenylamine or carbazole moieties. Both materials showed high thermal decomposition temperatures of 402 and 422 °C at 5% weight reduction for PhCAR-2ACR and TPA-2ACR, respectively. TPA-2ACR as hole-transporting material exhibited excellent current, power, and external quantum efficiencies of 55.74 cd/A, 29.28 lm/W and 21.59%, respectively. The achieved device efficiencies are much better than that of the referenced similar, 1,1-Bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC)-based device (32.53 cd/A, 18.58 lm/W and 10.6%). Moreover, phenyl carbazole-based PhCAR-2ACR showed good device characteristics when applied for host material in phosphorescent OLEDs.     

基于香豆素衍生物的新型绿色/红色磷光有机电致发光主体材料的设计、合成及性能表征

设计并合成了一种新型的香豆素衍生物,3,3-’(1,3-苯基)双(7-乙氧基-4-甲基香豆素)(mEMCB),并系统地对该香豆素衍生物进行了结构表征、光物理性能、热物理性能及电化学性能的研究.mEMCB具有较高的三重态能级(2.42eV),可敏化绿色、红色磷光掺杂材料.同时,mEMCB还具有较好的热稳定性(T_g:79.72℃,T_d:361.49℃),其T_g明显高于目前广泛使用的磷光主体材料CBP.研究结果表明,mEMCB是一个潜在的可以用于绿色和红色磷光有机电致发光器件的主体材料.     

Electroluminescent properties of anthracene‐containing polyimides

Optical and electroluminescent properties of a new soluble anthracene‐containing polyimide (ACPI) was studied. Solubility of ACPI in organic solvents allows direct spin casting of the polymer films exhibiting intense photo‐ and electroluminescence (EL) in the visible range. This non‐conjugated polymer was used as emitting and electron‐hole transporting layers in polymer light‐emitting devices (LEDs). EL properties of the uni‐ and bilayer LEDs are discussed in terms of the band structure, bipolar transport and electron donor‐acceptor interactions. Copyright © 2000 John Wiley & Sons, Ltd.     

2,3-Disubstituted Fluorene Scaffold for Efficient Green Phosphorescent Organic Light-Emitting Diodes

Fluorene is a classic three-membered polycyclic aromatic hydrocarbon, and it has been widely used in optoelectronic devices. Here we explore a simple and efficient strategy for the derivatization at the 2- and 3- positions in fluorene unit. By introducing different types of substituents, we design two pairs of 2,3-disubstituted fluorene isomers and use them as host materials for phosphorescent organic light-emitting diodes (PHOLEDs). The green PHOLEDs hosted by these fluorene derivatives realize high external quantum efficiencies (EQE) over 20 % with low efficiency roll-off. Particularly, the devices hosted by 2TRz3TPA and 2TPA3TRz achieve nearly 24 % EQE and 104 lm W⁻¹ power efficiency. These results clearly demonstrate that the 2,3-disubstituted fluorene platforms are potentially useful for constructing host materials.     

高效蓝光有机电致磷光主体材料的研究进展

磷光有机发光二极管(PHOLEDs)相对于传统的荧光有机电致发光具有更高的量子效率, 在平板显示和固态照明方面有极大的应用前景. 本工作将近几年来外量子效率高于20%的蓝光PHOLEDs中小分子主体材料进行总结, 并按空穴传输型、电子传输型和双极传输型主体材料分类, 重点介绍这些材料的分子结构、三线态能级、HOMO/LUMO能级、热稳定性、形态稳定性以及作为蓝光PHOLEDs主体材料的器件性能, 以期对主体材料的研究及OLED产业化提供参考价值.     

Poly(methyl methacrylate) copolymers containing pendant carbazole and oxadiazole moieties for applications in single‐layer organic light emitting devices

Methyl methacrylate derived monomers functionalized with pendant carbazole and oxadiazole moieties were synthesized and could be copolymerized to form a random copolymer. The glass transition temperature of the copolymers could be predicted with a Fox equation and ranged from 140 to 191 °C. The photoluminescent characteristics of the copolymers, both in solution and in solid films, exhibited emission that was a combination of sharp and broad peaks, suggestive of monomeric and chromophore aggregation emission. These trends were also apparent in the electroluminescent response of the copolymers, where the appearance of an electromer emission was evident and was tentatively assigned to the carbazole moieties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7882–7897, 2008     

Synthesis of phenothiazine‐based electroluminescent polymers with a stable emission property

Two phenothiazine‐based polymers were synthesized by the Heck reaction of 3,7‐divinyl‐N‐octyl‐phenothiazine with 3,7‐diiodo‐N‐octyl‐phenothiazine and 5,8‐dibromo‐2,3‐diethylquinoxaline. The polymers were characterized by the measurements of ¹H‐NMR, IR, TG, GPC, CV, UV–Vis, and FL. The results indicated that the introduction of quinoxaline group makes the absorption, PL, and EL emission maxima red‐shifted. The EL emission maximum and the CIE 1931 coordinate value are stabilized at a constant value with the increase in operating voltages. Therefore, the polymers have a stable electroluminescent emission property. Copyright © 2008 John Wiley & Sons, Ltd.