Excited states and photochemistry of saturated molecules. Minimal plus Rydberg basis set calculations on the vertical spectra of CH4, C2H6, C3H8, and n-C4H10

Basis sets consisting of STO4G plus a set of one s and three p Rydberg functions are developed for methane, ethane, propane, and n-butane. These basis sets are then used to predict the vertical electronic spectra for the same four molecules using a limited CI. The results are found to be in reasonable agreement with experiment and with more sophisticated calculations on ethane and propane.     

Total cross sections for electron scattering by polyatomic molecules at 10–1000 eV: C2H2, C2H4, C2H6, C3H6, C3H8 and C4H8

A model complex optical potential (composed of static, exchange, polarization and absorption terms) is employed to calculate the total (elastic and inelastic) electron-atom scattering cross sections from the corresponding atomic wave function at the Hartree-Fock level. The total cross sections (TCS) for electron scattering by their corresponding molecules (C₂H₂, C₂H₄, C₂H₆, C₃H₆, C₃H₈ and C₄H₈) are firstly obtained by the use of the additivity rule over an incident energy range of 10–1000 eV. The qualitative molecular results are compared with experimental data and other calculations wherever available, good agreement is obtained in intermediate-and high-energy region.     

Two-dimensional cobalt metal-organic frameworks for efficient C3H6/CH4 and C3H8/CH4 hydrocarbon separation

A Co-based two-dimensional (2D) microporous metal-organic frameworks (UPC-32) with narrow distance between layers and layers (3.8 Å) exhibits high selectivity of C₃H₆/CH₄ (31.46) and C₃H₈/CH₄ (28.04) at 298 K and 1 bar. It is the first 2D Co-MOF that showed selective separation of C3 hydrocarbon from CH₄.     

Ionization efficiencies of C3H6, C4H8, C6H12, C2H6O,and C3H8O isomers

Ionization efficiencies of 14 organic compounds have been measured in the wavelength region from 105 to 134nm using an ionization chamber. The compounds examined are cyclopropane, propylene, l-butene, isobutene, cis-and trans-2-butenes, cyclohexane, 1-hexane, tetramethylethylene, ethyl alcohol, dimethyl ether, n-, and iso-propyl alcohol, and ethyl methyl ether. The ionization efficiencies of cyclopropane and cyclohexane monotonically increase with increasing photon energy, but those for the others show a peak or a shoulder in the wavelength region of the present work.     

Arrhenius parameters for the reactions CH3. + C4H10 → CH4 + C4H9. and C2H5. + C4H10 → C2H6 + C4H9.

Study of n-butane pyrolysis at high temperature in a flow system allows measurement of the sum of the rate constants of the initiation reactions and of the Arrhenius parameters of the reactions Established data for k₁/k₂ allow estimation of k₁ for 951°K and this, with recent thermochemical data, yields the result log k_?1 (l.mole s^?1) = 8.5, in remarkable agreement with a recent measurement [20] but over si×ty times smaller than conventional assumption. The product k₃k₄ (l.²mole^?2s^?2) is found to be associated with the Arrhenius parameters log (A₃A₄) = 21.90 ± 0.6 and (E₃ + E₄) = 38.3 ± 2.7 kcal/mole. These values are much higher than would be e×pected on the basis of low temperature estimates. Independent evaluation gives log A₄ = 10.5 ± 0.4 (l.mole^?1s^?1) and E₄ = 20.1 ± 1.7 kcal/mole, hence log A₃ = 11.4 ± 0.8 (l.mole^?1s^?1) and E₃ = 18.2 ± 3.2 kcal/mole. These values are shown to be entirely consistent with a wide range of results from pyrolytic studies, and it is argued that they further confirm the view that Arrhenius plots for alkyl radical–alkane metathetical reactions are strongly curved, in part due to tunneling and, appreciably, to other as yet unidentified effects. Since there is published evidence that metathetical reactions involving hydrogen atoms show even greater curvature, it is suggested that this may be a characteristic of many metathetical reactions.     

The diffusion of CO2, CH4, C2H4, and C3H8 in polyethylene at elevated pressures

Diffusion and solubility coefficients have been determined for the CO₂^?, CH₄^?, C₂H₄^?, and C₃H₈-polyethylene systems at temperatures of 5, 20, and 35°C and at gas pressures up to 40 atm. Diffusion coefficients were obtained from rates of gas absorption in polyethylene rods under isothermal-isobaric conditions by means of a new diffusivity apparatus. The concentration dependence of the diffusion coefficients was represented satisfactorily by Fujita's free-volume model, modified for semicrystalline polymers, while the solubility of all the penetrants in polyethylene was within the limit of Henry's law. Semiempirical correlations were found for the free-volume parameters in terms of physicochemical properties of the penetrant gases and the penetrant-polymer systems. These correlations, if confirmed, should permit the prediction of diffusion and permeability coefficients of other gases and of gas mixtures in polyethylene as functions of pressure and temperature.     

H atom yields from the reactions of CN radicals with C2H2, C2H4, C3H6, trans-2-C4H8, and iso-C4H8

The kinetics and H atom channel yield at both 298 and 195 K have been determined for reactions of CN radicals with C2H2 (1.00+/-0.21, 0.97+/-0.20), C2H4 (0.96+/-0.032, 1.04+/-0.042), C3H6 (pressure dependent), iso-C4H8 (pressure dependent), and trans-2-C4H8 (0.039+/-0.019, 0.029+/-0.047) where the first figure in each bracket is the H atom yield at 298 K and the second is that at 195 K. The kinetics of all reactions were studied by monitoring both CN decay and H atom growth by laser-induced fluorescence at 357.7 and 121.6 nm, respectively. The results are in good agreement with previous studies where available. The rate coefficients for the reaction of CN with trans-2-butene and iso-butene have been measured at 298 and 195 K for the first time, and the rate coefficients are as follows: k298K=(2.93+/-0.23)x10(-10) cm3 molecule(-1) s(-1), k195K=(3.58+/-0.43)x10(-10) cm3 molecule(-1) s(-1) and k298K=(3.17+/-0.10)x10(-10) cm3 molecule(-1) s(-1), k195K=(4.32+/-0.35)x10(-10) cm3 molecule(-1) s(-1), respectively, where the errors represent a combination of statistical uncertainty (2sigma) and an estimate of possible systematic errors. A potential energy surface for the CN+C3H6 reaction has been constructed using G3X//UB3LYP electronic structure calculations identifying a number of reaction channels leading to either H, CH3, or HCN elimination following the formation of initial addition complexes. Results from the potential energy surface calculations have been used to run master equation calculations with the ratio of primary:secondary addition, the average amount of downward energy transferred in a collision DeltaEd, and the difference in barrier heights between H atom elimination and an H atom 1, 2 migration as variable parameters. Excellent agreement is obtained with the experimental 298 K H atom yields with the following parameter values: secondary addition complex formation equal to 80%, DeltaEd=145 cm(-1), and the barrier height for H atom elimination set 5 kJ mol(-1) lower than the barrier for migration. Finally, very low temperature master equation simulations using the best fit parameters have been carried out in an increased precision environment utilizing quad-double and double-double arithmetic to predict H and CH3 yields for the CN+C3H6 reaction at temperatures and pressures relevant to Titan. The H and CH3 yields predicted by the master equation have been parametrized in a simple equation for use in modeling.     

Syntheses, Spectroscopic Properties and Crystal Structures of （2-Cl-C6H4CH2）3SnS2CN（C5H10） and （2-Cl-C6H4CH2）3SnS2CN（C4H9N）

1 INTRODUCTION The chemistry of organotin(IV) complexes was extensively studied due to their biological activity and coordination chemistry[1～7]. More recently, phar- maceutical properties of alkyltin(IV) complexes with dithiocarbamate ligands have bee…     

Lithiation of the Tin-containing Sulfone Me3SnCH2CH2CH2SO2C6H4CH3-4

The tin-containing sulfide Me₃Sn(CH₂)₃-S-C₆H₅CH₃-4 obtained by photoaddition of 4-toluene- thiol to allyltrimethyltin was oxidized with hydrogen peroxide to synthesize the tin-containing sulfone Me₃Sn(CH₂)₃-SO₂-C₆H₄CH₃-4, the tin and sulfur atoms in which are separated by a trimethylene bribge. Treatment of the sulfone with butyllithium gave a first tin-containing lithium salt having a red-brown color. The exchange reaction of this salt with methyl iodide resulted in formation of two new isomeric tin-containing sulfones Me₃SnCH₂CH₂CH(CH₃)-SO₂-C₆H₄CH₃ and Me₃Sn(CH₂)₃-SO₂-C₆H₄CH₂CH₃ identified by ^1HNMR spectroscopy. The latter result implies that the tin-containing sulfone is lithiated both by the methylene group adjacent to the sulfonyl group and by the toluene methyl group.     

Diskussion Intramolekularer Wechselwirkungen an RC6H4(CH3)2SiF-, RC6H4(CH3)2SiOCH3-, RC6H4O(CH3)2SiF-, RC6H4OSi(CH3)3- und (CH3)3MF- [M  C,Si, Ge,Sn] Verbindungen

Chalcogenide Glasses with Organic Components. I. Glasses of the Selenium-Arsenic-Bromine-Azobenzene System New glasses were prepared by melting suitable glasses of the system Se? As? Br and of Bis(selenenylbromido)-azobenzene, and cooling them subsequently. Azobenzene groups are connected with the inorganic glass by selenium-carbon bonds. These substances represent the link between polymers as part of the organic chemistry and inorganic glasses. The structures of these products are discussed on the basis of thermal, conductivity, and infrared spectroscopic studies and of density measurements.     

Hydrothermal Synthesis and Crystal Structure of a New Phosphonate： {[Cu（1,10-phen）]2-（H2O3PCH2C6H4C6H4CH2PO3H）2-（HO3PCH2C6H4C6H4CH2PO3H） }n

1 INTRODUCTION Metal organophosphonates have attracted considerable attention for over three decades due to their potential or practical applications, include- ing ion exchanges[1, 2], molecular sensors[3] and optics[4, 5]. Recently, a number of porous m…     

On the interaction of Mo and Mo2 with NH3, C2H4, and C3H6

The reactivity of Mo and Mo₂ with ammonia, ethene, and propene molecules has been investigated by using Density Functional Theory. Different gradient‐corrected and hybrid exchange‐correlation functionals have been employed. Coordination modes, binding energies, geometrical structures, vibrational frequencies have been computed and compared with the available experimental counterparts. The results obtained show that the molybdenum atom is able to react with C₂H₄ and C₃H₆, and binds weakly with NH₃. The dimer Mo₂ gives a stable complexes with ammonia, ethene, and propene. For the Mo₂NH₃ complex, all the employed levels of theory give binding energies in good agreement with the experimental value, while in the case of the MoC₂H₄ system, the use of model core potentials coupled with gradient‐corrected exchange‐correlation functionals overestimates the binding energies. For MoC₃H₆, Mo₂C₂H₄, and Mo₂C₃H₆ we predict a binding energy of 14–15, 20–24, and 18–20 kcal/mol, respectively. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1557–1564, 2001     

Ab initio vibrational state calculations with a quartic force field: applications to H2CO, C2H4, CH3OH, CH3CCH, and C6H6

For polyatomic molecules, n-mode coupling representations of the quartic force field (nMR-QFF) are presented, which include terms up to n normal coordinate couplings in a fourth-order polynomial potential energy function. The computational scheme to evaluate third-and fourth-order derivatives by finite differentiations of the energy is fully described. The code to generate the nMR-QFF has been implemented into GAMESS program package and interfaced with the vibrational self-consistent field (VSCF) and correlation corrected VSCF (cc-VSCF) methods. As a demonstration, fundamental frequencies have been calculated by the cc-VSCF method based on 2MR-QFF for formaldehyde, ethylene, methanol, propyne, and benzene. The applications show that 2MR-QFF is a highly accurate potential energy function, with errors of 1.0-1.9% relative to the experimental value in fundamental frequencies. This approach will help quantitative evaluations of vibrational energies of a general molecule with a reasonable computational cost.     

GF Calculations for some tricyclic molecules: C3H6, C3H4, C2H4NH,C2H4O and C2H4S

We have functions expressed as antisymmetrized products of strongly orthogonal geminals have been evaluated for some three membered ring molecules. GF results are compared with previously computed SCF-MO results, obtained employing the same atomic basis. Transferability features of bonds and inner shells are shown.     

Reactions of Cl2P3/2: Absolute rate constants for reaction with H2, CH4, C2H6, CH2Cl2, C2Cl4, and c?C6H12

The absolute rate constants have been measured for several gas-phase chlorine atom-molecule reactions at 25°C by resonance fluorescence. These reactions and their corresponding rate constants in units of cm³ mole^?1 sec^?1 are: The effects of varying the substrate pressure, total pressure, light intensity and chlorine-atom source on the value of the bimolecular rate constants have been investigated for all these reactions. Conditions under which no competing side reaction occurs were established and the reported rate constants were measured under these conditions. For reactions (2), (5), (6), (7), and 8, there is a discrepancy of a factor of two between the rate constants measured in this work and values in the literature; it is suggested that this is due to an error in the previously measured value of k/k upon which the relative measurements in the literature ultimately depend.