A Large Scale Separation of Taxanes from the Bark Extract of Taxus yunnanesis and 1H‐ and 13C‐NMR Assignments for 7‐epi‐10‐Deacetyltaxol

A large‐scale separation of paclitaxel from semi‐purified bark extract of Taxus yunnanesis was investigated. The chromatographic behavior of paclitaxel and two dose editing analogues, cephalomannine and 7‐epi‐10‐deacetyltaxol were systematically studied on a C₁₈ bonded phase column with different mobile phase in reverse phase mode. According to the notably different selectivity of the methanol and acetonitrile with water in the mobile phase and the most important requirement of capacity in preparative chromatography, the optimum suitably mobile phase used in a large‐scale isolation of paclitaxel and 7‐epi‐10‐deacetyltaxol on a preparative C₁₈ column was given. Cephalomannine was eliminated by ozonolysis and after then separated throughout a normal phase silica column. The whole large‐scale process for high purity paclitaxel from the bark extract of Taxus yunnanesis consisted of a preliminary purification with Biotage FLASH 150i system based on a prepacked normal phase silica cartridge followed by using a C₁₈ Nova‐pak? column in Waters PrepLC? 4000 preparative HPLC system. The structure of 7‐epi‐10‐deacetyltaxol was elucidated by 2D NMR technologies of TOCSY, DQF‐COSY, HMQC and HMBC, etc.     

Stereochemical differentiation of C‐7 hydroxyltaxane isomers by electrospray ionization mass spectrometry

In this study, different electrospray ionization mass spectrometric (ESI‐MS) methods were utilized to analyze several pairs of taxane stereoisomers including paclitaxel and 7‐epi‐paclitaxel. Both ESI‐MS and tandem mass spectrometry (MS/MS) techniques provided stereochemically dependent mass spectra in negative‐ion mode, and all studied stereoisomers could be easily distinguished based on their characteristic ions or distinct fragmentation patterns. MS/MS experiments for several taxane analogues at various collision energies were performed to elucidate potential dissociation pathways. The gas‐phase deprotonation potentials were also calculated to estimate the most thermodynamically favorable deprotonation site using DFT B3LYP/6‐31G(d). The results of the theoretical studies agreed well with the fragmentation patterns of paclitaxel and 7‐epi‐paclitaxel observed from MS/MS experiments. In addition, it was found that liquid chromatography (LC)/ESI‐MS was a useful and sensitive technique for assignment of C‐7 taxane stereoisomers from realistic samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Eco‐friendly synthesis of 3,4‐dihydroquinoxalin‐2‐amine,diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives with the aid of MCM‐48/H5PW10V2O40

A heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ was produced and used as an efficient, eco‐friendly and highly recyclable catalyst for the one‐pot and multicomponent synthesis of 3,4‐dihydroquinoxalin‐2‐amine, diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives in aqueous media and at room temperature with high yields in short reaction times (40–60 min). The recoverable catalyst was easily recycled at least five times without any loss of catalytic activity. The structures of obtained products were confirmed using ¹H NMR and ¹³C NMR spectra.     

Isocyanide‐Based Three‐Component Synthesis of Highly Substituted 1,6‐Dihydro‐6,6‐dimethylpyrazine‐2,3‐dicarbonitrile, 3,4‐Dihydrobenzo[g]quinoxalin‐2‐amine,and 3,4‐Dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine Derivatives

A novel and efficient isocyanide‐based multicomponent reaction between alkyl or aryl isocyanides 1 , 2,3‐diaminomaleonitrile ( 2 ), naphthalene‐2,3‐diamines ( 6 ) or benzene‐1,2‐diamine ( 9 ), and 3‐oxopentanedioic acid ( 3 ) or Meldrum's acid ( 4 ) or ketones 7 was developed for the ecologic synthesis, at room temperature under mild conditions, of 1,6‐dihydropyrazine‐2,3‐dicarbonitriles 5a – 5f in H₂O without using any catalyst, and of 3,4‐dihydrobenzo[g]quinoxalin‐2‐amine and 3,4‐dihydro‐3,3‐dimethyl‐quinoxalin‐2‐amine derivatives 8a – 8g and 10a – 10e , respectively, in the presence of a catalytic amount of p‐toluenesulfonic acid (TsOH) in EtOH, in good to excellent yields (Scheme 1).     

Fe3O4@L‐arginine magnetic nanoparticles: A novel and magnetically retrievable catalyst for the synthesis of 1′3‐diaryl‐2N‐azaphenalene

The catalytic activity of l ‐arginine‐coated nano‐Fe₃O₄ particles (Fe₃O₄@l ‐arginine) proves they are a novel magnetic catalyst without the use of heat and reflux for the synthesis of 1,3‐diaryl‐2‐N‐azaphenalene derivatives and n‐acyl‐1,3‐diaryl‐2‐N‐azaphenylene derivatives in a one‐pot pseudo‐five‐component condensation reaction of compounds of 2,7‐naphthalene diol, aldehydes, and ammonia derivatives (ammonium acetate or ammonium hydrogen phosphate) and solvent (water and alcohol) with high yield and short reaction times, economical, and simple workup. The structure and magnetic properties of the obtained nanoparticles were characterized via Fourier transform infrared spectroscopy (IR) and field emission scanning electron microscopy (FE‐SEM). The results demonstrated that the average size of the synthesized magnetite nanoparticles is about 21 nm. In addition, the heterogeneous catalyst can be easily recovered magnetically and can be reused for further runs without significant loss of its catalytic activity.     

Identification of Intermediates in the Biosynthesis of PR Toxin by Penicillium roqueforti

The sesquiterpenoid 7‐epi‐neopetasone was synthesized via the Wieland–Miescher ketone. The compound was identical to a previously tentatively identified headspace constituent of Penicillium roqueforti. Feeding experiments with ¹³C‐labeled mevalonolactone isotopomers demonstrated that oxidation at C12 and an isomerization of the C11?C12 to a C7?C11 double bond must occur independently and not via a C7‐C11‐C12 allyl radical in one step. Feeding with (11,12,13‐¹³C₃)‐7‐epi‐neopetasone resulted in labelling of the PR toxin, thus establishing this compound as a newly identified pathway intermediate.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

Determination of docetaxel in rat plasma and its application in the comparative pharmacokinetics of Taxotere and SID530, a novel docetaxel formulation with hydroxypropyl‐β‐cyclodextrin

In this study, a sensitive, simple and reliable method for the quantification of docetaxel in rat plasma was developed and validated using liquid chromatography–tandem mass spectrometry (LC‐MS/MS). The plasma samples were prepared by protein precipitation, and paclitaxel was used as an internal standard (IS). Chromatographic separation was achieved using a Gemini C₁₈ column (2.0 × 150 mm, 5 µm) with a mobile phase consisting of 0.1% formic acid–acetonitrile (30:70, v/v). The precursor–product ion pairs used for multiple reaction monitoring were m/z 808.5 → 527.5 (docetaxel) and m/z 854.2 → 286.5 (IS, paclitaxel). A calibration curve for docetaxel was constructed over the range 1–1000 ng/mL. The developed method was specific, precise and accurate, and no matrix effect was observed. The validated method was applied in a comparative pharmacokinetic study in which two docetaxel formulations, SID530, a new parenteral formulation of docetaxel with hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), and Taxotere, were administered to rats at a dose of 5 mg/kg. For SID530 and Taxotere, the mean C₀ values were 1494 and 1818 ng/mL, respectively, and the AUC_last values were 837 and 755 h ng/mL, respectively. These two formulations did not show any statistical differences with regard to the pharmacokinetic parameters, thus establishing that the SID530 and Taxotere products are pharmacokinetically comparable in male rats. Copyright © 2012 John Wiley & Sons, Ltd.     

Silica‐bonded S‐sulfonic Acid as a Recyclable Catalyst for Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones

2,3‐Dihydroquinazolin‐4(1H)‐one derivatives were synthesized via a one‐pot, three component reaction of isatoic anhydride and an aromatic aldehyde with ammonium acetate or primary amine catalyzed by silica‐bonded S‐sulfonic acid in ethanol at 80°C. The reaction work‐up is simple and the catalyst is easily separated from the products by filtration. The heterogeneous catalyst was recycled for ten runs upon the condensation reaction of isatoic anhydride and 4‐chlorobenzaldehyde with ammonium acetate without losing its catalytic activity.     

Chemoselectivity of the Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine

The reactions of 5‐benzylidene‐3‐phenylrhodanine ( 2 ; rhodanine=2‐thioxo‐1,3‐thiazolidin‐4‐one) with diazomethane ( 7a ) and phenyldiazomethane ( 7b ) occurred chemoselectively at the exocyclic C?C bond to give the spirocyclopropane derivatives 9 and, in the case of 7a , also the C‐methylated products 8 (Scheme 1). In contrast, diphenyldiazomethane ( 7c ) reacted exclusively with the C?S group leading to the 2‐(diphenylmethylidene)‐1,3‐thiazolidine 11 via [2+3] cycloaddition and a ‘two‐fold extrusion reaction’. Treatment of 8 or 9b with an excess of 7a in refluxing CH₂Cl₂ and in THF at room temperature in the presence of [Rh₂(OAc)₄], respectively, led to the 1,3‐thiazolidine‐2,4‐diones 15 and 20 , respectively, i.e., the products of the hydrolysis of the intermediate thiocarbonyl ylide. On the other hand, the reactions with 7b and 7c in boiling toluene yielded the corresponding 2‐methylidene derivatives 16, 21a , and 21b . Finally, the reaction of 11 with 7a occurred exclusively at the electron‐poor C?C bond, which is conjugated with the C?O group. In addition to the spirocyclopropane 23 , the C‐methylated 22 was formed as a minor product. The structures of the products (Z)‐ 8, 9a, 9b, 11 , and 23 were established by X‐ray crystallography.     

A New Route to Vitamin E Key‐Intermediates by Olefin Cross‐Metathesis

Ru‐Catalyzed olefin cross‐metathesis (CM) has been successfully applied to the synthesis of several phytyl derivatives ( 2b, 2d – f, 3b ) with a trisubstituted C?C bond, as useful intermediates for an alternative route to α‐tocopheryl acetate (vitamin E acetate; 1b ) (Scheme 1). Using the second‐generation Grubbs catalyst RuCl₂(C₂₁H₂₆N₂)(CHPh)PCy₃ (Cy = cyclohexyl; 4a ) and Hoveyda–Grubbs catalyst RuCl₂(C₂₁H₂₆N₂){CH‐C₆H₄(O‐ⁱPr)‐2} ( 4b ), the reactions were performed with various C‐allyl ( 5a – f, 7a,b ) and O‐allyl ( 8a – d ) derivatives of trimethylhydroquinone‐1‐acetate as substrates. 2,6,10,14‐Tetramethylpentadec‐1‐ene ( 6a ) and derivatives 6c – e of phytol ( 6b ) as well as phytal ( 6f ) were employed as olefin partners for the CM reactions (Schemes 2 and 5). The vitamin E precursors could be prepared in up to 83% isolated yield as (E/Z)‐mixtures.     

Piperazine‐functionalized nickel ferrite nanoparticles as efficient and reusable catalysts for the solvent‐free synthesis of 2‐amino‐4H‐chromenes

Piperazine‐functionalized nickel ferrite (NiFe₂O₄) nanoparticles were synthesized as recoverable heterogeneous base catalysts using a routine method. The synthesized materials were characterized using various spectroscopic techniques such as infrared, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetry analysis, and vibrating sample magnetometry. Catalytic efficiency was investigated in the synthesis of 2‐amino‐4H‐chromene derivatives via a one‐pot three component reaction of aldehyde and malononitrile with β or α‐naphthol/5‐methyle resorcinol under solvent‐free conditions with good to high yields. This method is operationally simple and has several advantages such as good to high yield, short reaction times, solvent‐free conditions, and easy synthesis. Moreover, the catalyst was recovered easily using an external magnet and reused three times without distinctive loss in catalytic activity.     

Comparison of racemic epi‐inosose and (−)‐epi‐inosose

The conversion of myo‐inositol to epi‐inositol can be achieved by the hydride reduction of an intermediate epi‐inosose derived from myo‐inositol. (−)‐epi‐Inosose, (I), crystallized in the monoclinic space group P2₁, with two independent molecules in the asymmetric unit [Hosomi et al. (2000). Acta Cryst. C 56 , e584–e585]. On the other hand, (2RS,3SR,5SR,6SR)‐epi‐inosose, C₆H₁₀O₆, (II), crystallized in the orthorhombic space group Pca2₁. Interestingly, the conformation of the molecules in the two structures is nearly the same, the only difference being the orientation of the C‐3 and C‐4 hydroxy H atoms. As a result, the molecular organization achieved mainly through strong O—H...O hydrogen bonding in the racemic and homochiral lattices is similar. The compound also follows Wallach's rule, in that the racemic crystals are denser than the optically active form.     

SO3H‐functionalized nano‐MGO‐D‐NH2: Synthesis,characterization and application for one‐pot synthesis of pyrano[2,3‐d]pyrimidinone and tetrahydrobenzo[b]pyran derivatives in aqueous media

An SO₃H‐functionalized nano‐MGO‐D‐NH₂ catalyst has been prepared by multi‐functionalization of a magnetic graphene oxide (GO) nanohybrid and evaluated in the synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3‐d]pyrimidinone derivatives. The GO/Fe₃O₄ (MGO) hybrid was prepared via an improved Hummers method followed by the covalent attachment of 1,4‐butanesultone with the amino group of the as‐prepared polyamidoamine‐functionalized MGO (MGO‐D‐NH₂) to give double‐functionalized magnetic nanoparticles as the catalyst. The prepared nanoparticles were characterized to confirm their synthesis and to precisely determine their physicochemical properties. In summary, the prepared catalyst showed marked recyclability and catalytic performance in terms of reaction time and yield of products. The results of this study are hoped to aid the development of a new class of heterogeneous catalysts to show high performance and as excellent candidates for industrial applications.     

Design,Synthesis, and Evaluation of the Anticancer Properties of a Novel Series of α‐(Benzoylamino)‐β‐substituted Acrylic Amide Derivatives of Pyrazolo[1,5‐a]pyrimidine

A novel series of α‐(benzoylamino)‐β‐substituted acrylic amide derivatives of pyrazolo[1,5‐a]pyrimidine has been synthesized using a convergent multistep synthesis. The synthesized compounds were characterized by ¹H NMR, ¹³C NMR, ESI‐MS, and IR analyses. Those new compounds were screened for their in vitro antiproliferative activity using an MTT assay analysis. Out of nine derivatives synthesized in the current study, compounds 13g , 13d , 13h , and 13i exhibited the greatest anticancer activities in HeLa and HepG₂ cell lines. The in vitro anticancer activity of compound 13g against HeLa, HepG₂, and MCF‐7 cell lines is superior to the marketed drugs paclitaxel and SAHA.     

Design and characterization of Dendrimer of MNPs as a novel,heterogeneous and reusable nanomagnetic organometallic catalyst for one‐pot synthesis of hydroxyl naphthalene‐1,4‐dione derivatives under solvent‐free conditions

A novel super acidic magnetic nanoparticle as catalyst was successfully synthesized. The preparation of this dendrimer sulfonic acid functionalized γ‐Fe₂O₃ magnetic core‐shell silica nanoparticles as a new recoverable and heterogeneous nanocatalyst was described. The new catalyst was characterized using various techniques such as scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and thermo gravimetric synthesis (TGA). Moreover, we have examined the catalytic activity of the catalyst for one‐pot, efficient and facile synthesis of 2‐hydroxy‐1,4‐naphthoquinone derivatives via a three‐component condensation reaction of 2‐hydroxynaphthalene‐1,4‐dione, aromatic aldehydes and aniline derivatives. High yields of products, short reaction times, waste‐free, mild, ambient and solvent‐free reaction conditions are advantages of this protocol. Also, the catalyst can be easily recovered by an external magnetic and reused several times without significant loss of its catalytic activity.     

7‐Halogenated 7‐Deazapurine 2′‐Deoxyribonucleosides Related to 2′‐Deoxyadenosine, 2′‐Deoxyxanthosine,and 2′‐Deoxyisoguanosine: Syntheses and Properties

A series of 7‐fluorinated 7‐deazapurine 2′‐deoxyribonucleosides related to 2′‐deoxyadenosine, 2′‐deoxyxanthosine, and 2′‐deoxyisoguanosine as well as intermediates 4b – 7b, 8, 9b, 10b , and 17b were synthesized. The 7‐fluoro substituent was introduced in 2,6‐dichloro‐7‐deaza‐9H‐purine ( 11a ) with Selectfluor (Scheme 1). Apart from 2,6‐dichloro‐7‐fluoro‐7‐deaza‐9H‐purine ( 11b ), the 7‐chloro compound 11c was formed as by‐product. The mixture 11b / 11c was used for the glycosylation reaction; the separation of the 7‐fluoro from the 7‐chloro compound was performed on the level of the unprotected nucleosides. Other halogen substituents were introduced with N‐halogenosuccinimides ( 11a → 11c – 11e ). Nucleobase‐anion glycosylation afforded the nucleoside intermediates 13a – 13e (Scheme 2). The 7‐fluoro‐ and the 7‐chloro‐7‐deaza‐2′‐deoxyxanthosines, 5b and 5c , respectively, were obtained from the corresponding MeO compounds 17b and 17c , or 18 (Scheme 6). The 2′‐deoxyisoguanosine derivative 4b was prepared from 2‐chloro‐7‐fluoro‐7‐deaza‐2′‐deoxyadenosine 6b via a photochemically induced nucleophilic displacement reaction (Scheme 5). The pK_a values of the halogenated nucleosides were determined (Table 3). ¹³C‐NMR Chemical‐shift dependencies of C(7), C(5), and C(8) were related to the electronegativity of the 7‐halogen substituents (Fig. 3). In aqueous solution, 7‐halogenated 2′‐deoxyribonucleosides show an approximately 70% S population (Fig. 2 and Table 1).     

Fe3O4@SiO2@Im‐bisethylFc [HC2O4] as a novel recyclable heterogeneous nanocatalyst for synthesis of bis‐coumarin derivatives

Nanomagnetic bisethylferrocene‐containing ionic liquid supported on silica‐coated iron oxide (Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄]) as a novel catalyst was designed and synthesized. The described catalyst was recycled and used without change in the time and efficiency of the condensation reaction. The Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscopy images, X‐ray diffraction patterns, energy‐dispersive X‐ray spectroscopy, transmission electron microscope and vibrating‐sample magnetometer results confirmed the formation of Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄] magnetic nanoparticle. The novel bis‐coumarin derivatives were identified by ¹H‐NMR, ¹³C‐NMR, FT‐IR and CHNS analysis.     

Simultaneous LC‐MS/MS bioanalysis of etoposide and paclitaxel in mouse tissues and plasma after oral administration of self‐microemulsifying drug‐delivery systems

In this study, a liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method was developed and validated to simultaneously determine the anticancer drugs etoposide and paclitaxel in mouse plasma and tissues including liver, kidney, lung, heart, spleen and brain. The analytes were extracted from the matrices of interest by liquid–liquid extraction using methyl tert‐butyl ether–dichloromethane (1:1, v/v). Chromatographic separation was achieved on an Ultimate XB‐C₁₈ column (100 × 2.1 mm, 3 μm) at 40°C and the total run time was 4 min under a gradient elution. Ionization was conducted using electrospray ionization in the positive mode. Stable isotope etoposide‐d3 and docetaxel were used as the internal standards. The lower limit of quantitation (LLOQ) of etoposide was 1 ng/g tissue for all tissues and 0.5 ng/mL for plasma. The LLOQ of paclitaxel was 0.4 ng/g tissue and 0.2 ng/mL for all tissues and plasma, respectively. The coefficients of correlation for all of the analytes in the tissues and plasma were >0.99. Both intra‐ and inter‐day accuracy and precision were satisfactory. This method was successfully applied to measure plasma and tissue drug concentrations in mice treated with etoposide and paclitaxel‐loaded self‐microemulsifying drug‐delivery systems.