A Red‐Emissive Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Duplex Bearing Perylene Diimide Fluorophores for Warm‐White Organic Light‐Emitting Diode Application

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular duplex bearing red‐emitting perylene diimide (PDI) fluorophores, namely PDIHB , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³C NMR, TOF‐MS and 2D NMR. Compared with the small molecular reference compound PDI , PDIHB shows one time enhanced fluorescence efficiency in solid state (4.1% vs. 2.1%). More importantly, the presence of bulky HB oligoamide strands in PDIHB could trigger effective spatial separation between guest and host fluorophores in thin solid film state, hence inefficient energy transfer occurs between the blue‐emitting host 2TPhNIHB and red guest PDIHB in the 2 wt% guest/host blending film. As a result, a solution‐processed organic light‐emitting diode (OLED) with quite simple device structure of ITO/PEDOT:PSS (40 nm)/PVK (40 nm)/ PDIHB (2 wt%): 2TPhNIHB (50 nm)/LiF (0.8 nm)/Al (100 nm) could emit bias‐independent warm‐white electroluminescence with stable Commission Internationale de L'Eclairage coordinates of (0.42, 0.33), and the maximum brightness and current efficiency of this device are 260 cd·m^?2 and 0.49 cd·A^?1, respectively. All these results indicated that HB self‐assembly supramolecular fluorophores could act as prospective materials for white OLED application.     

A Novel Light‐Emitting Mixed‐Ligand Iridium(III) Complex with a Terpyridine‐Poly(ethylene glycol) Macroligand

Summary : A monoterpyridine‐poly(ethylene glycol) (mono‐tpy‐PEG) and a novel monoterpyridine‐PEG‐functionalized iridium(III ) complex were successfully synthesized and fully characterized by means of NMR, IR, and UV‐vis spectroscopy, as well as gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The functionalized monoterpyridine iridium(III ) complex was synthesized by a bridge‐splitting reaction of a dimeric iridium(III ) precursor complex using a chelating terpyridine ligand with a poly(ethylene glycol) tail. With this approach, a new class of light‐emitting polymeric materials revealing interesting optical properties was made avaialable.

Upon excitation of a spin‐coated film of the iridium(III ) complex prepared here, a yellow emission color (two bands in figure) was observed.     

Phosphorescent organic light‐emitting diodes using an iridium complex polymer as the solution‐processible host material

We prepared an iridium polymer complex having 2‐phenylpyridine as a η²‐cyclometallated ligand, a new OLED containing a solution‐processible iridium polymer as a host, and a phosphorescent iridium complex, [Ir(piq‐^tBu)₃] as a guest. This is the first example to apply a phosphorescent iridium complex polymer to a host material in a phosphorescent OLED. A phosphine copolymer ligand made from methyl methacrylate (MMA) and 4‐styryldiphenylphosphine can be used as an anchor polymer, which coordinates to luminescent iridium units to form a host metallopolymer easily. The OLED containing the host iridium‐complex polymer film, in which the guest, 2 wt % Ir(piq‐^tBu)₃, was doped, showed red electroluminescence as a result of efficient energy transfer from the iridium polymer host to the iridium guest. The maximum current efficiency of the device was 1.00, suggesting that a soluble iridium complex polymer can be used as a solution‐processible polymer host in EL devices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4358–4365, 2009     

Decreased Turn‐On Times of Single‐Component Light‐Emitting Electrochemical Cells by Tethering an Ionic Iridium Complex with Imidazolium Moieties

We report a significant decrease in turn‐on times of light‐emitting electrochemical cells (LECs) by tethering imidazolium moieties onto a cationic Ir complex. The introduction of two imidazolium groups at the ends of the two alkyl side chains of [Ir(ppy)₂(dC6‐daf)]⁺(PF₆)^? (ppy=2‐phenylpyridine, dC6‐daf=9,9′‐dihexyl‐4,5‐diazafluorene) gave the complex [Ir(ppy)₂(dC6MIM‐daf)]³⁺[(PF₆)^?]₃ (dC6MIM‐daf=9,9‐bis[6‐(3‐methylimidazolium)hexyl]‐1‐yl‐4,5‐diazafluorene). Both complexes exhibited similar photoluminescent/electrochemical properties and comparable electroluminescent efficiencies. The turn‐on times of the LECs based on the latter complex, however, were much lower than those of devices based on the former. The improvement is ascribed to increased concentrations of mobile counterions ((PF₆)^?) in the neat films and a consequent increase in neat‐film ionic conductivity. These results demonstrate that the technique is useful for molecular modifications of ionic transition‐metal complexes (ITMCs) to improve the turn‐on times of LECs and to realize single‐component ITMC LECs compatible with simple driving schemes.     

Synthesis of poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) with 5,10,15,20‐tetraphenylporphinato platinum(II) moiety as an oxygen‐sensing dye for pressure‐sensitive paint

Pressure‐sensitive paint (PSP), which consists of luminescent molecules embedded in an oxygen‐permeable polymer, has been developed for use in wind‐tunnel experiments. To improve the PSP technique, a novel luminescent methacrylate monomer, 5‐[4‐(2‐methacryloyloxyethoxycarbonyl)phenyl]‐10,15,20‐triphenylporphinato platinum(II), was synthesized and copolymerized with isobutyl methacrylate and 2,2,2‐trifluoroethyl methacrylate to produce a dye‐pendant copolymer ( 2 ). The introduction of 5,10,15,20‐tetraphenylporphinato platinum(II) (PtTPP) dye into 2 was confirmed by ultraviolet–visible spectroscopy and extended X‐ray absorption fine structure measurements. The extent of PtTPP dye incorporation in 2 was proportional to the molar fraction of the PtTPP‐pendant methacrylate monomer in the feed. The oxygen‐sensing property of 2 was compared with that of a PSP consisting of PtTPP dye embedded in poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate). Although the simple mixture of PtTPP and poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) showed a marked deviation from a single Stern–Volmer relation, novel copolymer 2 gave a highly linear Stern–Volmer plot. This was unequivocal evidence of dye conjugation on the oxygen‐sensing polymer film. © 2005Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2997–3006, 2005     

Supramolecular Sky‐Blue Phosphorescent Polymer Iridium Complexes for Single‐Emissive‐Layer Organic Light‐Emitting Diodes

Novel supramolecular phosphorescent polymers (SPPs) are synthesized as a new class of solution‐processable electroluminescent emitters. The formation of these SPPs takes advantage of the efficient non‐bonding assembly between bis(dibenzo‐24‐crown‐8)‐functionalized iridium complex monomer and bis(dibenzylammonium)‐tethered co‐monomer, which is monitored by ¹H NMR spectroscopy and viscosity measurements. These SPPs show good film morphology and an intrinsic glass transition with a T_g of 94–116 °C. Noticeably, they are highly photoluminescent in solid state with quantum efficiency up to ca. 78%. The photophysical and electroluminescent properties are strongly dependent on the molecular structures of the iridium complex monomers.

     

Water‐soluble fluorescent polymers that respond to singlet oxygen

Although acenes with more than three fused rings can both fluoresce efficiently and react with singlet oxygen (¹O₂) rapidly, their hydrophobic nature presents a challenge to their use in aqueous environments. Herein we report a series of fluorescent, water‐soluble random copolymers that each comprise (oligoethylene glycol) methacrylate (OEGMA) and one of several diarylacene methacrylates, including a tetracene methacrylate and a tetraceneothiophene methacrylate. Exposure to ¹O₂ in water oxidizes the pendant acenes, resulting in diminution of their fluorescence intensities. The observed rate of oxidation of the tetracene‐containing polymers compares favorably with a commercial ¹O₂‐sensitive dye. Polymers that also include energy‐donating coumarin side chains show ratiometric fluorescence changes in response to ¹O₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2526–2535     

Self‐Host Blue‐Emitting Iridium Dendrimer with Carbazole Dendrons: Nondoped Phosphorescent Organic Light‐Emitting Diodes

A blue‐emitting iridium dendrimer, namely B‐G2 , has been successfully designed and synthesized with a second‐generation oligocarbazole as the dendron, which is covalently attached to the emissive tris[2‐(2,4‐difluorophenyl)‐pyridyl]iridium(III) core through a nonconjugated link to form an efficient self‐host system in one dendrimer. Unlike small molecular phosphors and other phosphorescent dendrimers, B‐G2 shows a continuous enhancement in the device efficiency with increasing doping concentration. When using neat B‐G2 as the emitting layer, the nondoped device is achieved without loss in efficiency, thus giving a state‐of‐art EQE as high as 15.3 % (31.3 cd A^?1, 28.9 lm W^?1) along with CIE coordinates of (0.16, 0.29).     

Dramatic Influence of an Anionic Donor on the Oxygen‐Atom Transfer Reactivity of a MnV–Oxo Complex

Addition of an anionic donor to an Mn^V(O) porphyrinoid complex causes a dramatic increase in 2‐electron oxygen‐atom‐transfer (OAT) chemistry. The 6‐coordinate [Mn^V(O)(TBP₈Cz)(CN)]^? was generated from addition of Bu₄N⁺CN^? to the 5‐coordinate Mn^V(O) precursor. The cyanide‐ligated complex was characterized for the first time by Mn K‐edge X‐ray absorption spectroscopy (XAS) and gives Mn?O=1.53 Å, Mn?CN=2.21 Å. In combination with computational studies these distances were shown to correlate with a singlet ground state. Reaction of the CN^? complex with thioethers results in OAT to give the corresponding sulfoxide and a 2e^?‐reduced Mn^III(CN)^? complex. Kinetic measurements reveal a dramatic rate enhancement for OAT of approximately 24 000‐fold versus the same reaction for the parent 5‐coordinate complex. An Eyring analysis gives ΔH^≠=14 kcal mol^?1, ΔS^≠=?10 cal mol^?1 K^?1. Computational studies fully support the structures, spin states, and relative reactivity of the 5‐ and 6‐coordinate Mn^V(O) complexes.     

Synthesis of Dibenzothiophene‐Containing Ladder Polysilsesquioxane as a Blue Phosphorescent Host Material

A ladder polysilsesquioxanes with side chain of dibenzothiophene groups (BS‐LPSQ) was successfully synthesized. The ladder structure of BS‐LPSQ was characterized by MALDI‐TOF MS, XRD, and ¹H NMR spectroscopy. Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), atomic force microscopy (AFM), and spectroscopic analyses revealed that the BS‐LPSQ has good film‐forming ability, high thermal and morphological stability, and good miscibility to the dopant iridium bis(4,6‐difluorophenyl)pyridinato‐N,C²‐picolinate (FIrpic), high triplet energy, and a wide bandgap. In addition, compared with the ringed polysiloxane BS‐PSQ phosphorescent host material reported previously, the ladder structure of BS‐LPSQ has not only a higher thermal resistance, but also could prevent molecular aggregation and effectively avoid quenching of fluorescence. Thus, the BS‐LPSQ may be used as a better host for the blue‐light‐emitting iridium complex FIrpic. The performance of the electrophosphorescent device, based on the ladder BS‐LPSQ as the active layer, is superior to that of ringed BS‐PSQ and any other polyhedral oligomeric silsesquioxane (POSS)‐based or polymer host materials.     

Silicomolybdate‐Incorporated‐Glutaraldehyde‐Cross‐Linked Poly‐L‐Lysine Film Modified Glassy Carbon Electrode as Amperometric Sensor for Bromate Determination

Silicomolybdate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐SiMo) film modified glassy carbon electrode was successfully prepared by means of electrostatically trapping the silicomolybdate anion in PLL‐GA cationic coating. The PLL‐GA‐SiMo film was stable and the charge transport through the film was fast. The modified electrode shows excellent electrocatalytic activity towards bromate reduction with significant reduction of overpotential. In amperometric determination of bromate, the calibration plot was linear over the concentration range of 5×10^?5 to 1.2×10^?3 M with a sensitivity of 3.6 μA mM^?1. Furthermore, PLL‐GA‐SiMo film electrode showed fast response and good stability.     

Visible‐Light‐Accelerated Copper(II)‐Catalyzed Regio‐ and Chemoselective Oxo‐Azidation of Vinyl Arenes

The visible‐light‐accelerated oxo‐azidation of vinyl arenes with trimethylsilylazide and molecular oxygen as stoichiometric oxidant was achieved. In contrast to photocatalysts based on iridium, ruthenium, or organic dyes, [Cu(dap)₂]Cl or [Cu(dap)Cl₂] were found to be unique for this transformation, which is attributed to their ability to interact with the substrates through ligand exchange and rebound mechanisms. Cu^II is proposed as the catalytically active species, which upon coordinating azide will undergo light‐accelerated homolysis to form Cu^I and azide radicals. This activation principle (Cu^II‐X→Cu^I+X^.) opens up new avenues for copper‐based photocatalysis.     

Red‐ and Green‐Emitting Iridium(III) Complexes for a Dual Barometric and Temperature‐Sensitive Paint

A new dual luminescent sensitive paint for barometric pressure and temperature (T) is presented. The green‐emitting iridium(III) complex [Ir(ppy)₂(carbac)] (ppy=2‐phenylpyridine; carbac=1‐(9H‐carbazol‐9‐yl)‐5,5‐dimethylhexane‐2,4‐dione) was applied as a novel probe for T along with the red‐emitting complex [Ir(btpy)₃], (btpy=2‐(benzo[b]thiophene‐2‐yl)pyridine) which functions as a barometric (in fact oxygen‐sensitive) probe. Both iridium complexes were dissolved in different polymer materials to achieve optimal responses. The probe [Ir(ppy)₂(carbac)] was dispersed in gas‐blocking poly(acrylonitrile) microparticles in order to suppress any quenching of its luminescence by oxygen. The barometric probe [Ir(btpy)₃], in turn, was incorporated in a cellulose acetate butyrate film which exhibits good permeability for oxygen. The effects of temperature on the response of the oxygen probe can be corrected by simultaneous optical determination of T, as the poly(acrylonitrile) microparticles containing the temperature indicator are incorporated into the film. The phosphorescent signals of the probes for T and barometric pressure, respectively, can be separated by optical filters due to the ≈75 nm difference in their emission maxima. The dual sensor is applicable to luminescence lifetime imaging of T and barometric pressure. It is the first luminescent dual sensor material for barometric pressure/T based exclusively on the use of Ir^III complexes in combination with luminescence lifetime imaging.     

Multicolor single‐layer electroluminescence device using poly(L‐glutamate) for hole transport

Helical poly(L ‐glutamate) with carbazole (Cz) side chains (PCELG) was synthesized as a hole‐transport host material for a dye‐doped polymer electroluminescence (EL) device. The main‐ and side‐chain conformations were investigated by a combination of polarized infrared spectroscopy and semiempirical quantum chemical calculation. In an electrically poled PCELG crystalline film, the main chain was found to assume a right‐handed α‐helical conformation with an order parameter of ～0.8. The Cz plane at the terminal side chain is inclined by about 44° toward the helical axis, creating a regular stacked structure conforming to the rigid α‐helical backbone. The principal EL characteristics of these devices were determined and compared with those of devices made with poly(N‐vinyl carbazole) (PVCz). For green and blue light, EL devices using PCELG exhibited luminance efficiencies comparable to those using PVCz. To the best of our knowledge, this was the first demonstration of primary colors emitted by an organic EL device with a polypeptide hole‐transport host material. The experimental results suggested that the total concentration and spatial arrangement of the Cz groups play an important role in determining the EL characteristics of dye‐doped polymer EL devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 496–502, 2010     

Iodate Sensing Electrodes Based on Phosphotungstate‐ Doped‐Glutaraldehyde‐Cross‐Linked Poly‐L‐lysine Coatings

Glassy carbon electrode modified with phosphotungstate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐PW) film was employed for iodate determination. The PLL‐GA‐PW film electrode shows excellent electrocatalytic activity towards iodate reduction with significant reduction of overpotential. Under optimized experimental conditions, a linear range from 5×10^?8 to 2.27×10^?2 M with a sensitivity of 61.75 μA mM^?1 was obtained. Possible interfering species, in iodate determination, were evaluated and the applicability of proposed sensor for iodate estimation in table salt was also demonstrated. The PLL‐GA‐PW film electrode shows fast response, wider linear range, and good selectivity and stability.     

Electrochemical Preparation of Brilliant‐Blue‐Modified Poly(diallyldimethylammonium Chloride) and Nafion‐Coated Glassy Carbon Electrodes and Their Electrocatalytic Behavior Towards Oxygen and L‐Cysteine

Brilliant blue FCF‐modified glassy carbon electrodes have been prepared by cycling the Nafion (or poly(diallyldimethylammonium chloride) (PDDAC)) coated electrodes repeatedly 15 cycles in brilliant blue FCF (BB FCF) dye solution. The BB FCF molecules are incorporated into Nafion coating by cycling the film‐covered electrode between +0.3 to 1.2 V (vs. Ag/AgCl) in pH 1.5 BB FCF solution while PDDAC‐coated electrode cycled between 0 to ?1.0 V (vs. Ag/AgCl) in pH 6.5 BB FCF solution to immobilize the dye. Electrostatic interaction between dye molecule and PDDAC was predominant in PDDAC coating whereas immobilization of dye in Nafion film attributed to the combined effect of electrostatic and hydrophobic interactions. The voltammetric features of BB FCF‐modified electrodes resemble that of surface‐confined redox couples. The peak potentials of BB FCF‐incorporated PDDAC‐coated electrode were shifted to more positive potential region with decreasing pH of contacting solution. BB FCF‐modified electrodes showed electrocatalytic activity towards reduction of oxygen and oxidation of L ‐cysteine with significant decease of overvoltage compared to unmodified electrode. The BB FCF‐modified Nafion‐coated electrode was tested for its analytical applications toward determination of L ‐cysteine. The linear range of calibration plot at BB FCF‐modified Nafion‐coated electrode is 10 to 100 μM, which coincides with L ‐cysteine levels in biological fluids. Sensitivity and detection limit of the electrode are 111 nA μM^?1 and 0.5 μM, respectively.     

Ethoxy‐substituted Oligo‐phenylenevinylene‐Bridged Organic Dyes for Efficient Dye‐Sensitized Solar Cells

Organic dyes with ethoxy‐substituted oligo‐phenylenevinylene as chromophores were synthesized for dye‐sensitized solar cells (DSSCs), and the detailed relationships between the dye structures, photophysical properties, electrochemical properties, and performances of DSSCs were described. The dye S3O showed broad IPCE spectra in the spectral range of 350–750 nm, and the dye S1P showed solar energy‐to‐electricity conversion efficiency (() of up to 4.23% under AM 1.5 irradiation (100 mW/cm²) in comparison with the reference Ru‐complex (N719 dye) with an η value of 5.90% under similar experimental conditions.     

Induction and inversion of chirality in poly‐L‐lysine and methyl orange complex

The mechanism of complexation of poly‐L‐lysine (PLL) with methyl orange (MO) and the appearance of induced circular dichroism (ICD) were investigated as a function of dye concentration and temperature and compared with that of the PLL‐ethyl orange complex. The formation of stoichiometric complexes with uniform size and intensities of ICDs depended on the length of alkyl groups (methyl and ethyl) as determined from quartz crystal microbalance measurement, absorption spectra, and CD spectra data. Furthermore, at constant PLL concentration, a dependence of the inversion of the ICD on the MO concentration (CMO) was observed in the PLL‐MO complexes, which to our knowledge has not been reported for a constant dye concentration system. The positive ICD in the PLL‐MO complexes observed at CMO lower than 2.0 × 10^?5 M showed reversible changes in response to heating and cooling, whereas the negative ICD in PLL‐MO complexes observed at higher CMO inverted to positive ICD values in response to a decrease in temperature. These results demonstrate the alkyl group substituent in the dye, dye concentration, and temperature play important roles in the formation of PLL‐azo dye complex and ICD appearance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Saturated Red‐Emitting Electrophosphorescent Polymers with Iridium Coordinating to β‐Diketonate Units in the Main Chain

Summary: A series of novel copolymers with fluorene‐alt‐carbazole segments and β‐diketonate moieties coordinating to iridium were synthesized by Suzuki polycondensation, and characterized by ¹H NMR, ¹³C NMR, and GPC. In the absorption spectra of the copolymers, metal‐to‐ligand charge‐transfer transitions coming from iridium complex increased in intensity with increasing content of Ir complex in copolymers. The photoluminescence spectra of the copolymers were dominated by emission from the iridium complex with peak at ca. 620 nm even at the feed ratio of the complex as low as 0.5 mol‐%. The electrochemical investigation indicated that the incorporation of carbazole and iridium complex units reduce the barrier for both hole and electron injection compared with the polyfluorene. The light‐emitting diodes using the copolymers as emission layer under different device configurations were fabricated. The devices with 2‐(4‐biphenylyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole (PBD) show significantly higher external quantum efficiencies than those without PBD. A saturated red‐emitting polymer light‐emitting diode with emission peak at 628 nm, the maximum external quantum efficiency of 0.6% at the current density (J) of 38.5 mA · cm⁻², and the maximum luminance of 541 cd · m⁻² at 15.8 V was achieved from the device ITO/PEDOT/PFCzIrpiq3 + PBD (40%)/Ba/Al.

Novel copolymers with fluorene‐alt‐carbazole segments and iridium coordinating to β‐diketonate in the main chain.     

Bismuth Film Microelectrode Modified with Overoxidized Poly‐1‐Naphtylamine Protective Membrane for Enhanced Stripping Voltammetric Detection

The application of protective overoxidized poly‐1‐naphtylamine membrane (ONAP) is demonstrated in combination with bismuth film microelectrode (ONAP‐BiFME) for anodic stripping voltammetric measurement of trace heavy metals in the presence of some selected surfactants. The ONAP membrane was electrochemically deposited on the surface of bare single carbon fiber microelectrode followed by the in situ or ex situ preparation of the bismuth film. The key operational parameters influencing the stripping performance of the ONAP‐BiFME were optimized and its electroanalytical performance was examined in the model solution containing Cd(II) and Pb(II) as test metal ions. The ONAP‐BiFME exhibited significantly enhanced stripping voltammetric response (approximately 70% for Cd(II) and 45% for Pb(II)) in comparison with unmodified BiFME in the absence of surfactants. In the presence of high concentrations, e.g., 20 mg L^?1, of anionic or cationic surfactants, the stripping signal for, e.g., Cd(II) decreased for less than 6% at the ONAP‐BiFME, whereas at the unmodified BiFME the signal attenuated considerably (approximately 38%). Moreover, in the presence of 10 mg L^?1 of nonionic surfactant Triton X‐100, the stripping signals at the bare BiFME were almost completely suppressed, whereas at the ONAP‐BiFME exhibited linear concentration behavior in the examined concentration range from 10 to 120 μg L^?1, with the calculated limit of detection of 5.0 μg L^?1 and 3.4 μg L^?1 for Cd(II) and Pb(II), respectively in connection with 60 s accumulation time. The attractive behavior of ONAP‐modified BiFME expands the applicability of bismuth‐based electrodes for measurement of trace heavy metals in real environments, where the presence of more complex matrix can be expected.